Report requirement, for count before the input selection.

Hi All,
I have a requirement:
And in infoprovider we have :
in 07.2011, 10 records were created.
in 08.2011, 40 records were created.
in 09.2011, 50 records were created.
in 10.2011, 70 records were created.
User enters month interval like 07.2011 - 10.2011
and wants outout like:
Calmonth:... 07.2011....08.2011.......09.2011.......10.2011
Count : ........30010.......30050...........30100..........30170
Means.in report 07.2011 should show all the count upto 07.2011,
Similarly 08.2011 show all counts upto 08.2011 month. And in same way others also.
Since input is 07.2011 to 10.2011, so report is considering only data between this range only.
How do i get count before 07.2011 in report and meet report requirement.
Please suggest and let me know if more information is required.
Thanks,
Jitender.

Hi Jitender,
It is not possible to generate the query columns dynamically in the output based on the user input.
For getting the aggregated value what you can do is, create a customer exit variable on fiscal period and restrict it from some starting period till user entered period.
In your example let us say you have data from 07.2009 then your customer exit variable will have range from 07.2009 till 07.2011. Use this variable in a RKF with count as key figure and period as customer exit variable here you will get the output as 30010.
For getting the next columns you can change the period range by using offset. But you will have to create different columns beforehand in the query design itself. The only thing you can do is based on the user input different columns will be populated even you can keep the dynamic text using text variable so that you will get dynamic period heading but dynamic creation of columns is not possible.
Regards,
Durgesh.

Similar Messages

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

Hiding variable values in the input selection screen.

Hello Experts,
We have an authorisation relevant characteristic on which we have built a variable. We have restricted few values for this characteristic through the analysis authorisation.
The business requirement is that these values which are maintained in the analysis authorisation should not be populated in the input selection screen for that particular variable. In other words we have to hide these values but the variable should a part of input selection screen.
Can anyone please guide on how can we hide these variable values inspite of maintaining them in our analysis authorisations.
Thanks..
Best Regds,
Suyog...

Hi Suyog,
Have you got any solution on this issue. I have same kind of issue in BI7. When running the RSRT transaction manager has to give some comments for a document option. but the subordinates should not modify or see the comments. Is there any way to restrict this access to certain users. Our requirement is to either disable the document option or should not appear in the list.
please give your inputs to find a way to solution.
Thanks in advance.
Regards,,
Appala Raju

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

J1INUT Error - No data exist for processing with the given selection option

Hi Guru's,
I am using transaction J1INUT utilization of provision of TDS on Services for which in have made the provision with the help of J1INPR, But when I am executing J1INUT transaction .The following error message is displaying:
No data exist for processing with the given selection options
I have followed the below steps.
1) ME21N - OP Creation
2) ML81N - Service Entry
3) J1INPR - Provision of TDS
4) MIRO - Invoice Posting
I have checked the Table J_1IEWTPROV In that system is updating the table also. Even I have activated table TRWCA for field IND
But still I am getting the same error. Any suggestions to resolve this.
Appreciate your inputs. Thanks in Advance
Regards,
DeepaK

Hi Deepak,
Refer the below link and follow the steps - Provision for Taxes on Service Recieved.
Re: Provision for Taxes on Service Recieved
Hope it may useful to you.
Regards,
Govind Bhaskaran

Combined debt reports required for 'associated' customers showing amountof

Combined debt reports required for 'associated' customers showing amountof debt and aged by month

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Is it possible to reorder an iPhoto book 2 years later? My hard drive crashed and the photo book is no longer in my iPhoto but Apple printed it for me before the crash. Would Apple still be able to print another copy?

Is it possible to reorder an iPhoto book 2 years later? My hard drive crashed and the photo book is no longer in my iPhoto but Apple printed it for me before the crash. Would Apple still be able to print another copy?

For future books you might consider doing what I do: create a separate library for each book andcopy the photos for the book from your working library to the book library with iPhoto Library Manager.
When the book is completed and ordered burn the library package to a CD, DVD or external HD to archive it so it's available for editing and reordering at a later date if needed.

The software required for communicating with the ipod is not installed corr

I just purchased a 60 gb ipod about 3 days ago and have been trying to sync it with itunes since. i have synced the ipod with itunes on two other computers but when i try to connect it to my itunes the error message "the software required for communicating with the ipod is not installed correctly" message always comes up. i have done almost everything possible including removing itunes and reinstalling it several times. if anyone can help me...please feel free
thanks

Here you go, Please read the whole topic. I'am sure this will help you:
http://docs.info.apple.com/article.html?artnum=93716

'the software required for communicating with the iPod is not installed correctly. HELP.

everytime i try to update my ipod nano, i get an error message saying: 'the software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPods software'
i have tried reinstalling my itunes but i am still getting this message.
what do i do?!

When you reinstalled, did you just uninstall iTunes, then download it from apple.com/itunes/download?

How to determine the cursor record count before the "open cursor"?

Is it possible to determine the record count of an explicit cursor without running a count()? Say, my cursor definition is something like this,
CURSOR cur_vehicle
IS
SELECT os.order_id, os.order_item, vs.part_id
vs.part_num,
vs.iso_num,
vs.model_yr
vs.dealer_cde,
vs.cust_cde,
px.plant_cd
FROM parts_source vs,
orders_source os,
plant_tbl_crossref px
wHERE os.order_id = vs.order_id
AND vs.part_id = os.part_id
AND vs.plant_cde = px.plant_cde
ORDER BY os.order_id;
I want to log the count of records returned by the above cursor prior to the first fetch, without running a count(1) for the query in cursor select.
I know adding " Count(1) over(order by null) " in the cursor SELECT will bring it. But that does not help me log the record count to some log file or table before opening the cursor for processing.
To conclude, my objective is to update the record count of cursor in some table before processing

sarvan wrote:
Is it possible to determine the record count of an explicit cursor without running a count()?
..snipped..No. The only way to do it correctly is inside that select.
Each select is a consistent read. Which means that if this is done as 2 select statements, the 1st select can see a different version of the data than the 2nd select statement. does. So if you want a count and that to be consistent and on the same version of the data than the select, it has to be done as part of the select.
Also consider what a cursor is. It is not a result set of sorts that is created in memory upfront - with a convenient interface that tells you the size/number of rows of that result set.
A cursor is basically a program that reads database data as input and produce output. A fetch from a cursor is an instruction for this program to execute and output data.
There's no data set that is created by the cursor from which the count can be determined. The cursor program does have state variables - like +%RowCount+ that specifies how many rows the cursor has thus far output. And you need to run that cursor to the end (no more output) in order to determine the total number of rows output by the cursor.

How to put Dynamic Query description based on the Input selections?

Hi All,
I have a requirement wherien there will be 4 input selections for a report namely A, B, C & D alongwith Fiscal year period. wherin Fiscal Year period will be mandatory field
Now, the output of the report should show the description of the report as follows:
For E.g: if Fiscal year Period = 011/2011
When User Enters input value for 'A', then report nameshould be displayed as A 011/2011
When User Enters input value for 'B', then report nameshould be displayed as B 011/2011
When User Enters input value for 'C', then report nameshould be displayed as C 011/2011
When User Enters input value for 'D', then report nameshould be displayed as D 011/2011
Please advice if this requirement is possible and if yes, please guide me how?
Thanks& Regards
Sneha Santhanakrishnan

change the code as below and see
WHEN 'ZREP_DESC'.
data: wa_data TYPE rrrangesid.
      CLEAR : wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZVALUE'.   "ZVALUE is variable for A,B,C,D field
      l_no = wa_var_range-low.
      CLEAR wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZFISCPER' iobjnm = '0FISCPER'.
      IF wa_var_range-low IS NOT INITIAL.
        gv_var = wa_var_range-low.
concatenate l_no gv_var into wa_data-low
      ENDIF.
      wa_data-sign = 'I'.
      wa_data-opt = 'BT'.
      APPEND wa_data TO e_t_range.
ENDCASE.

Restrict the data to a set of values in the input selection

Hi,
We have a requirement it goes like this..
I've a object ZTEST which stores values (A,B, C..... Z). This object is extensively used across various DSO's and Infoset and Reports were created on top of them.
Whenever I create a prompt on this object..I get all the values ranging from (A, B,C....Z).
Now my requirement is, one of the report is intrested in only couple of values from ZTEST say (A,B,C and D). If I create prompt on this object I should get only (A, B,C and D ) in the selection screen.
Could anyone help me in this regard
Edited by: Siegfried Szameitat on Nov 3, 2008 12:07 PM
deleted points offer as it is against the rules

Thanks for the update.
I am not sure on the Authorisation Relevant. Could you please expain me in detail how we could do in step by step.
Thanks in advance.
Regards,
sari

Report Requirment for YTD and individual fisc periods

Hi Team,
I have a requirement in the report that should have the below structure
                      Fiscal Year      Actual Actual Actual   Actual                                                 Actual    Actual
                                                YTD      2008     2009   2010                                                      2011     2012
Char1 Char1 FiscalPer                                                APR 2010 MAY2010 .... MAR2011
Fiscal Year and Fisc period are in column and Char1 and Char2 are in Rows of the report.
For a particular year alone, I need the actual amount splitted on fiscal year period and rest of the past and furture years the actual amount should be aggregated for the year.
Please let me know if have come across this scenario.
Regards,
Ramesh
Edited by: ramesh kumar on Aug 10, 2010 5:52 AM

Hi Ramesh,
I am assuming your scenario as followes -
If User enters year(user entry variable) - 'Y1', You need to display key figs by - 'Y1Period 1'....... 'Y1Period 12'. For rest of the years(future and past from Y1), data should be aggregated and displayed per year.
The solutions would be -
Create Restricted Key Figs, for Y1Period1 - restrict it to user entry variable for year(Y1) and then to posting period hard coded to 1. Similalry create rest of the key figs for each period by changing the hard coded period value for 1 through 12.
Create restricted key fig for past years from Y1 - restrict it to user entry variable for year(Y1) and then add offset of '-1'. Simmilarly create rest of key figs for other previous years by increaing offset -2, -3 so on.
Create restricted key fig for future years from Y1 - restrict it to user entry variable for year(Y1) and then add offset of '+1'. Simmilarly create rest of key figs for other future years by increaing offset +2, +3 so on.
Hope this helps.
Regards,
Pritesh.

Custom reports required for bangladesh.

Hi All,
What are custom reports normally required for Bangladesh considering their statutory norms?
Regds
RK.

Hi Sharvari,
This report is most sought and important report because now C Form and F form collection has become online and accurate data have to be provide to the sales tax authorities based on which these forms will be issued.
On this matter I suggest you don't spend time in questing reports for these forms because standard system does not provide. It is better that you sit with an ABAPer spending logical effort and get the customized report which will be great ease to sales tax processing.
Regards,
Chintan Joshi.

Report requirement, for count before the input selection.

Similar Messages

Maybe you are looking for