Report row limit?

I have a report and there should be a total 4212 records. In my APEX report it is cutting off at 500 records. Should I be able to display (and download from report) greater than 500 records? Is it possible some setting is limiting my report to 500 records? I can run the same SELECT statement used in the report and I get 4212 records.
Thanks,
John

Hi,
yes it does have a default. You can set this as high as you want, but higher settings may cause a performance hit, but certainly something higher than ~5000 records shouldn't cause any major problems. From a practical point of view, what user is going to want to page through 1000's of pages to get to the millionth row any way.
Regards
Andre

Similar Messages

Report is exceeding row limit

Hi,
I have a report in BW and when I execute it, it is going beyond excel limit i.e. exceeding 65000 entries in excel and I am unable to see the whole report. Please let me know, how do I go about solving this issue.
Thanks & Regards

Several possible solutions:
- Run the report for a smaller set of data (e.g., 3 months instead of a year).
- Run the query on the Web, where there is no restriction on the number of rows, then export to a CSV file.
- Upgrade to Excel 2007, which has a much higher row limit (1 million).
Hope this helps...
Bob

10000 row limit in Portal Reports

Portal Team,
Will the 10000 row limit be ever removed
from the Portal Reports ? This limit
is pretty silly (at least let the developers set a limit, instead of hard coding it )
thanks

Bala,
3.0.7.6.2 on NT.
My question doesn't pertain to number of rows on a page. It pertains to the total number of rows that a query will return i.e if you have a table with 11,0000 records your query will return only 10,000 (or 10001) records.
My query in SQL*PLus returns more than
10,000 rows (okay I did not spool the output, just did a count(*) ). The same query
minus the count(*), but with columns , as a report gave 10001 rows. I base this on the following: The total row count on the report says Rows 1 to <n> of 10001. I must admit that I did not have the patience to paginate through to the end to see if 10,000 was the limit. I did go back to the wwv_advanced* package in WebDB (since its code is unwrapped) and saw that there was a global variable g_max_rows with a value of 10000.
Not sure if this is carried over to Portal.
The *render_report package in WebDB does a
check to see if total row count is >= to g_max_rows or the dyn. sql cursor returned nothing. This is a prob.
Would appreciate some feedback,
Thanks

Report Row Height and Column Width

Hi,
I have a cell in a report (a description column) that causes the row height to become very large (when there is a lot of text in the description). I can make the column wider on the report attributes page, but there doesn't seem to be any place to influence the maximum height of a row on a report, short of modifying the template.
Adding style attributes (e.g. max-height:30px) to an element only affects the <span> that the element resides in, not the table cell or row.
Displaying the column as a text area is a useful workaround. The downside is the border and scroll bars do waste a lot of screen real estate. Does there exist some other way of setting a limit on the height and/or width of a report, report column or report row?
Oh, and another question- how do make line breaks in this forum? There's no support for <BR> or [br].

Please reply to this thread, my customer is facing the same issue. He does not have issue with the excel and the pdf output but in the rtf output the table heght increases to accomadate the data.He want it to bevave in the same way as the pdf do.
Regards,
Ajay

What is report size limit?

I'm using Oracle Dev Suite 10g, can anyone tell me what is the report size limit for Oracle report?
Also, if the file is generated in ASCII format, what is the maximum length of :
1. A column
2. A row
Thank you in advance.
Siak Teng

Hi,
I hope you can send 2MB ,if your getting any error try to increase rows in your instanceconfig.xml file kindly do the below things
You need to increase the size and need to include one tag in instanceconfig.xml to increase the size and restart the presentation services.
by default delivers will send only 250 records.
take a original backup and the do it
insert the following code into instanceconfig.xml.
<Views>
<Table> <DefaultRowsDisplayedInDelivery>100000</Defau ltRowsDisplayedInDelivery>
</Table>
</Views>
restart all your services.
for more refer
http://oraclebizint.wordpress.com/2007/12/17/oracle-bi-ee-101332-calling-java-scripts-and-java-classes-from-ibots/
Hope this solves the problem...
THanks
Deva

Custom report row template

Few questions when using a custom report row template. Followup to the discussion Report Row Template: Column condition
1. The row template allows full control how the entire row is rendered. I can see this being used when the report query returns a single row and we need to format it in a very specific way. But when the query returns multiple rows, how is the specified Row Template used? i.e the first row is "consumed" and rendered as per the template. If the same process is repeated for subsequent rows, how can we control whether successive rows are rendered across the page (left to right) or down the page (top to bottom)?
2. When a custom row template is used to render a tabular form, the hidden columns (marked Edit=Y, Show=N on Report Attributes) are present in the markup even when they are not specified in the row template! i.e. the MRU process works. Of course, this is a good thing but I was curious to know what exactly controls this, what part of the report template controls where the hidden form elements are placed?
3. Any number/date formatting specified declaratively on the Column Attributes page appears to be taken into account when column values are substituted in the template using #COL# notation. But all the other Column Attributes are ignored (alignment, sum, show, link, etc). Is there a way to use the Link attribute to declaratively specify the link so the value of the column #COL# as seen by the report template includes the A tag?
Thanks

Comments? Thanks

Report Row With Detail (AJAX) by Carl - How to implement?

I just had a look at Carl's example place and I'd like to implement his Report Row With Detail feature. But how, it's made up of 3 sections:
1. a query
2. javascript
3. application process
The query on which the report is based and where I want this feature is:
select leverancier, artnr, vendorcode from plijst where productgroep = :p1_assortiment_tree or subgroep = :p1_assortiment_tree
A break is defined on Leverancier
I understand the query and the application process part. But where goes the Java part???
Peter
Message was edited by:
Pete

Tried to upload your example application, unfortunately it does not seem to upload properly in my APEX v2.0 environment
Can you please confirm if your example works with APEX version 2
and does the Javascript go in the Page Header or Region Header/ Footer area
thankyou
Frank

Report row highlight based on a page item

Is there a way to highlight a report row based on the value of a page item?
In my case I have a report where the application user requests data in a detail report using a column link in the master report. This loads an id number from my report into a page item (say :P8_ID for example). If this item is null, I want the report rows to all render normally (nothing is selected or the detail report has been closed). If there is an id in that field then I want the row containing the information about that item to highlight (its column link has been clicked selected it to bring up a detail report).
At first glance, this looks similar to Vikas solution (Change the Report row color when clicked but I am trying to make the connection between what has already been done and where I need to be.

After looking back, I discovered my value was being set after the report rendered. When I re-organized my calculations and the rest, it worked.

Report Row With Detail (IFRAME)

Hi,
I am trying to implement the Report Row with Detail but not successful.
I have gone thru the various threads in the forum.. but i am unable to
get it. It would be great if I could know the step by step process to do the same.
I have created two regions. The first region (the query to it) also
has a show_region link.. I have copied and pasted the javascript given
by Carl.
Thanks,
shilpa.

Hello,
Ok then you are almost there so when you submit the form to update your data on a sucessful save you are going to create a plsql region that just uses htp.p() to write out the javascript to update the report in the main page.
a simple example would be something like this.
Lets say I'm getting back values to update the two first table cells on my parent report.
<script>
/*set up call back function*/
function ReportRowUpdate(){
var lRow = parent.g_LastRowOpened; /* hook to last row clicked */
lRow.cells[0].innerHTML = 'SOME VALUE FROM DATABASE 1';
lRow.cells[1].innerHTML = 'SOME VALUE FROM DATABASE 2';
/*call call back function*/
ReportRowUpdate();
</script>
And that should be it.
Carl
Message was edited by:
Carl Backstrom

Report Row With Detail (IFRAME) - How to reload Main Page within iFrame

Hi,
Based on Carl's example - Report Row With Detail (IFRAME), i.e:
http://htmldb.oracle.com/pls/otn/f?p=11933:17
Within my scenario, I have a button within the iframe section of my report that calls a pl/sql process that performs some database processing.
What I basically need is a means of performing a page refresh of the main page, when this button within the iframe is pressed. In Carl's example, that would be page 17.
As mentioned, I call a PL/SQL process within the iframe, but unsure how to then refresh the main page - parent page.
Any help would be appreciated.
Thanks.
Tony.

Tony,
you could insert the following script to the region footer of a region located on your "iframe"-page.
<script>
parent.location.reload();
</script>
But this is dangerous because everytime the parent is being reloaded, the iframe is loaded, too. Risk of loop...
A possible solution is to conditionally display a html region (with the script) on your iframe-page basing on a request. You could post the request as a result after your plsql processing in a branch.
Regards,
Jens

Report Row Template - header

Hi
I have made a custom "Report Row Template". I have write the "header" direct in the html code. Is that a problem if i want to translate the application? Is there a way how to use the headers from the apex?
Best Regrads
Jesper Vels

Hello Jesper,
OK, I can see now what you are trying to do. Unfortunately, the only similar example I'm familiar with - http://apex.oracle.com/pls/otn/f?p=11933:108 – Is also using hard coded text for the headings.
I can show you how to get to these headings, and how to use them on your template, but I'm afraid this is not a generic solution, as I couldn't find an active substitution string for the column headers.
As there isn't any variables to hold these column names, we need to define our own. You can do that using an application items or hidden page items. Let's say I defined three hidden items on my report page: P1_HD1, P1_HD2, P1_HD3. Each item will be defined with Source Type of SQL Query, and Source Use of "Only when …". The Source Value for the first item will be as follow:
select heading
from FLOWS_020200.APEX_APPLICATION_PAGE_RPT_COLS
where APPLICATION_ID=:APP_ID and
       PAGE_ID=:APP_PAGE_ID and
       DISPLAY_SEQUENCE = 1;The DISPLAY_SEQUENCE should change according to the sequence of the column.
If you choose to use an application items, you'll need to use a before header computation on your report page, with the same query, to populate the application items.
In order to use these items in the report template, we need to use the "&P1_HD1." notation. You can have something like this, for the first header in your report query:
<tr><td>&P1_HD1.: </td><td>#1#</td>   . . .Hope this helps,
Arie.

Report row with detail (AJAX)

Hi,
In Carl's report row with detail (AJAX) demo, is there any way to show all detail row by default when the page is loaded?
http://apex.oracle.com/pls/otn/f?p=11933:13
Thanks.
Andy

Hi Andy,
In Carl's example, the "details" content seems to be from a table that has a one-to-one relationship with the main table. If this is the case, you would probably find it easier to use a "Named Column (row template)" type of report template and lay out the report as you need it rather than use Ajax
Otherwise, I'm sure it would be possible to loop through a report and make a series of Ajax calls to retrieve the details should there be multiple records required.
Andy

How can I create multiple selection check boxes in a report row?

Hello,
I'd like to know how a multiple selection checkbox can be created in report rows. In brief, I need to create a questionnaire template and each one of the questions will have multple options checkboxes, that means that the user can select more than one of the answers.
Should I use apex_item.checkbox ?. I have no clue here.
Please advice.
Thank you
Edited by: user9982480 on Jul 23, 2012 10:58 AM

Hi,
This might save your effort
http://www.apexsolution.de/questionnaire/
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Row limit in declarative list view web part

Hi,
Imagine you are in a scenario where you develop a custom web template or a site definition. Page Layouts with web part zones are being provisioned and out of them, decoratively web part pages are being created and populated with web parts. So something like:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="XXXProjectPages" Url="$Resources:osrvcore,List_Pages_UrlName;" Path="" SetupPath="FEATURES\XXX_Intranet_PMO_PageLayouts\">

<File Url="FullPageLayout\XXXFullPageLayout.aspx" Name="Default.aspx" Type="GhostableInLibrary" IgnoreIfAlreadyExists="FALSE" ReplaceContent="TRUE" Level="Published">
<Property Name="Title" Value="Team & Collaboration" />
<Property Name="ContentType" Value="$Resources:cmscore,contenttype_page_name;" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/XXXFullPageLayout.aspx, ~SiteCollection/_catalogs/masterpage/XXXFullPageLayout.aspx" />

<View List="Lists/Announcements" BaseViewID="102" WebPartZoneID="wpZone1" WebPartOrder="2">
<![CDATA[
<WebPart xmlns="http://schemas.microsoft.com/WebPart/v2">
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.ListViewWebPart</TypeName>
<Title>Latest News</Title>
<FrameType>TitleBarOnly</FrameType>
</WebPart>
]]>
</View>
For simplicity, let's assume that we are working with instances of OOB list definitions, such as Announcements or Document Library. So far so good. And now the question...
In my understanding if you want to do something as simple as limiting the number of items returned, or specifying a custom view criteria (filter/sorting/grouping, whatever) or just remove the toolbar, you have to go as far as provisioning an ENTIRE LIST
DEFINITION, defining your custom View in it (which declares the toolbar type, row limit and View) and then reference this new View by its BaseViewID. Is that correct?
Is there really no other, simpler way, of 'provisioning' and referencing a new view, to an existing list instance, along with the
Module -> File -> View element? I see a couple of logical options:
1) I would imagine such metadata could be stored in the web part and not the actual list. i.e. the web parts sends a CAML query to the list, based on the View metadata stored in it.
2) As we know, when you Edit page and configure the View for a List View Web Part on the page, that view is stored as a new hidden view in the actual list (i.e. if you have two list view web parts that reference that list, you will have two additional hidden
views). Then why can't we provision such (hidden) view along with the List View WebPart when we declare it and create the page? It could be created on first access of the page, or during the page
provisioning.
Another option could be the XmlDefinition property of the XsltListViewWebPart, but
apparently it is being ignored. I have also tried using the 'CustomSchema' property of the ListInstance, but it totally makes no sense because:
a) You cannot define more than one view in it, i.e. you have to override the OOB view that comes with the definition (lol?!)
b) You are supposed to overwrite the entire list definition, instead of simply upgrading parts of it
So, let me elaborate: if I want to have a <View> (ListViewWebPart) in my Page and this view to have some custom criteria, I have to provision an entire List Definition, is that correct? This is crazy.

Hi Hristo,
According to your description, my understanding is that you want to know if you can use <view> tag in the list view web part to define the row limit of list view web part.
Per my knowledge, you can define rowlimit element in the view element for list view web part directly not necessary to modify the entire list definition.
View Element:
http://msdn.microsoft.com/en-us/library/office/ms438338(v=office.15).aspx
Also, if you want to do more customization, you can still orverride the xslt.
More reference:
http://www.glynblogs.com/2011/04/overriding-the-presentation-of-an-xslt-list-view-web-part.html
http://unorig.com/2012/08/15/format-a-list-web-part-with-xslt/
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Conditional Formatting for Report Rows based on page item

Hi,
I have a report and a page item on a page. I would like to somehow highlight any report rows where a particular column in the report (e.g. "Customer_ID") matches the page item (e.g. P2_CUSTOMER_ID).
Any idea how to do this?
Thanks,
Forrest

You can also achieve this by jquery ( Please note - I just started learning jquery , so my way of doing it may not be a good way of doing it)
1. Download jquery from [http://www.jquery.com]
2. In Page Header enter
<script type="text/javascript" src="#WORKSPACE_IMAGES#jquery.js"></script>
   <script type="text/javascript">
   $(document).ready(function(){
      //t20data is the class for table cells in theme 20 .. change it as per you theme - right click view source and find it
         x = $('.t20data').length;
     //i=7 is the column index of customer id
    // i = i + 10 , 10 is the number of column
       for( i = 7 ; i < x ; i=i + 10)
            if($('.t20data').eq( i ).html() == $x('P2_CUSTOMER_ID').value)
                // i-7 is the first cell of row and i+2 is the last cell of row
                for( c = i - 7 ; c <= i + 2 ; c++)
                     $('.t20data').eq( c ).css("background","red");
</script>[ E X A M P L E | http://apex.oracle.com/pls/otn/f?p=62171:1]
Regards,
Shijesh

Report row limit?

Similar Messages

Maybe you are looking for