Report Scheduling. How to syncronize the GMT and the local server timezones

Hi everybody, I need to schedule reports using the Schedule tab on BIP, but I didn't still understand how the syncronization between my server's timezone and the GMT timezone works.....
I noticed that when I open the Report Schedules initial page, this is refreshed using the GMT timezone as follows:
Page Refreshed Monday, July 26, 2010 7:53 AM GMT
Actually I'm located in Athens (GMT+3)
I noticed that if I want to Run once a report, ONLY the GMT is took in consideration.
For example, I want to run a report at 11.30 (Athens timeone) where the time conditions are the following:
BIP time (GMT timezone): 08.00 AM GMT
server timezone: 11.00 AM (Athens time)
So, if I want to run a report at 11.30 AM (Athens time), I have to write in BIP (Run once) 08.30 AM, instead of 11.30, otherwise if I put 11.30, the report runs 3 hours and 30 minutes later instead of only 30 minutes !!! This is very frustrating....because it means that everytime I need to remember that there is a difference of 3 hours and if I want effectively....
I also set the Report Formatting Time Zone = GMT+03:00 to fill the gap between the GMT's timezone and Athens's timezone but it didn't work....
I found that the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> is set into the tmpl.xsl; I tried to change it (GMT+3 or GMT+03:00), I stop and restart the BIP server....but nothing...the BIP timezone is always GMT (as showed by th Page Refreshed date and time).
At the end my question is this: is there a way to modify the internal BIP timezone in order to fill the gap between this and the server timezone ?
In other words, I'd like to see the page refreshed with the server timezone (Athens timezone) and not the GMT timezone, in order to schedule reports thinking directly my local server timezone (and not think always to calculate how many hours is the difference).
This, I think is a common issue for everybody, but....I didn't find nothing in the forum....
If somebody found a workaround, every help will be appreciated.
Thanks
Alex

Good Morning Vetsrini,
I know that the "Report Formatting Time Zone" is used to set the timezone properly INSIDE the report...but my attention now is concentrated on the Scheduling...
As I mentioned before I'd like to find a way to syncronize the BIP timezone (based on GMT) and my local server timezone (Athens, GMT+2), and this I think it's possiblie only if I can modify the BIP timezone (GMT): instead to have GMT, I'd like to have GMT+2 in order to have the same time in both of systems.
I already tried to change the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> into the tmpl.xsl, but it didn't work....
I don't understand how all the others millions of BIP users who don't live in UK can use the scheduler keeping in mind always the gap between their local time and the GMT time set in BIP......
Do you have another hint or workaround ?
Thanks for your help
Alex

Similar Messages

How to select, with a SUD DIALOG, the range and the trace data to import from citadel

Hello,
I use DIAdem to generate reports from Citadel and I would like to create a script which asks the user to select data and it's corresponding range to import it from citadel. The script should display a dialog box (sud dialog), the user will choose the data and the range.
I would like to know if a function exists because up to now, I have not found anything suitable for this.
In my search i found this (see answer from Brad Turpin) http://forums.ni.com/ni/board/message?board.id=60&message.id=985&requireLogin=False
But I don't know how to automatize it with sud dialog
I am looking for information and examples on the subject.
Thanks

Hello,
I changed the data base path, when I run the script an error message appeared (see attached file). When I look the dataportal files, I see that the complet data is charge and not a window (see attached file). have you any idee?
Attachments:
error load citadel function.pdf ‏455 KB
view.pdf ‏279 KB

In SAP 4.6c In classical reports output how to change Font size and Font type

Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.

These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both.

How get two message in the top and the bottom of the view?

Hi,experts,
I can make a messagearea in the top of view.
The message can be found in the messagearea when the application report error.
Now ,I need report the error in the top of the view and the bottom of the view as the same time.
I make two messagearea: One is in the top of the view and the other is in the bottom of the view.
But, The message can be found in the messagearea in the top of the view when the application report error, and the error report cann't be found in the bottom of the view.
How can I do it?
Best regards,
tao

Hi Tao,
Your primary requirement is to display messages on some event (error) at different locations (Top, Middle) not the UI element, so and if you've a choice in choosing any UI otherthan MessageArea, go for any of these 'Lable, TextView, Caption' and bind the context and set the context value on that event.
Hope it helps!
Thanks,
MS

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad?? Thanks

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad??
Also, once I figure out how to replace iCal with Outlook/Mac on iTunes, how do I synch the phone and pad so that the information on those devices over-writes onto Outlook as a backup, rather than having a blank Calendar on Outlook wipe out all of the information on the phone and pad???
Thanks

If you haven't tried already, plug your devices into iTunes, and on each device next to the "Summary" tab at the top is another tab called "Info." Click that and scroll down to Contacts, Calendars, etc. There should be a pull down bar under each category for "Sync contacts from..." and you should be able to select from that pull down list Outlook. Hit Apply at the bottom and see if that does it.

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%. This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
Regualr occurence for me.
Also ... you need to let your battery work at least once per month. Let it run down to 40%, but not less if you can at all avoid it. Running thr battery fully dead will shorten the battery life significantly.

HT1386 I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone. On the computer, a circle is next to the song and the title faded out. What the heck is that all about and how do I get my songs back onto my

I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone. On the computer, a circle is next to the song and the title faded out. What the heck is that all about and how do I get my songs back onto my phone playlist? Never happened before. My software is up to date?

http://support.apple.com/kb/HT2519

HT2534 how do i use itunes and the app store without any credit card or gift card?

i just got my iphone and i used to use itunes all the time before when downloading all songs were completly free, how do i use itunes and the app store to find free stuff to download without having to add a credit card or gift card with my account?

Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

I have an iphone 4. I disconnected it from my iTunes account but I am still using the iphone and the Apple ID. If I make a purchase will it work? Also, how can I reconnect my iphone to my Apple ID?

I have an iphone 4.
I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
If I make a purchase will it work?
Also, how can I reconnect my iphone to my Apple ID?

Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627

My hotmail account was hacked, so the mail that I use to sign in in itunes also, it's the same. But if I create a new account how can I transfer the money and the apps purchased to the new account ?

My hotmail account was hacked, so the mail that I use to sign in in itunes also, it's the same. But if I create a new account how can I transfer the money and the apps purchased to the new account ?
I really need help ! I had around 30 $ in my account !

Don't create a new iTunes account.
Just update everything with new info/change password/ security questions.
-> https://appleid.apple.com/

I have a macbook pro 17". How can I change the way things look? The page only takes about half of the screen and the fonts are fairly small. I am sure there is an easy adjustment. Please clue me in. Thanks

I have a macbook pro 17". I love the big screen, but how can I change the display? The content takes about half of the screen and the fonts are very small. I am sure it is an easy fix, so please clue me in. Thanks

Look at your >System Preferences>Displays

I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to make the lines of the table and the template same

Hello Abapers,
I have a requirement, I have made a table in which i have displayed all the values in it, and under that i have taken a template and diplayed the total of it but the lines drawn to the table and the template is different, the table line is dark and the line of the template is lite, how can i make the line of the template dark, i mean the same as the table line. i hope u understand my problem.can u please help me in solving my problem as the requirement is very urgent.
HOPE U UNDERSTAND MY PROBLEM
Thank u in advance .

HI,
Adjust the line width option for template and table,its there under pattern.

Report Scheduling. How to syncronize the GMT and the local server timezones

Similar Messages

Maybe you are looking for