Report titles should change dynamically based on input

Dear Experts,
I developed the Customer Feedback Quarterly Report. Here i need three dynamic titles.  I Developed the selection screen by using variables for Quarter,Year,Profitcenter,Fiscvariant.Here in my report i have two columns like quarter and cumulative for the year.suppose if i select Quater 2 then july,august,september data will display under quarter column and April to september data(Cumulative data) will display in cumulative for the year column. Now, here i need three dynamic titles for my report.suppose if i select Quarter 2 then in first heading i need the name of the report for the quarter of year (EX: Customer Feedback - FTA For The Quarter 1 of 2008) I acheived this by using Text variable.
2. As second title i need (Quarter From July To September ) if i select quater 3 it should dynamically change for all the quarters.In the same way for year also (Year From April To September) how to acheive This?
Could any throw some light on this.
Thanks,
Sony

Hi Sony,
Check the link :-           https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f002c608-
                                   2533-2c10-25a1-d0e7f7b5b662
Hope it helps,
Thanks,
Uday

Similar Messages

  • How to control internal table columns dynamically based on input

    i have 2 fields in the selection screen - user and tcode
    we can give any number of tcodes as in put
    based on requirement i need to display all the tcodes belongs to one user in one row
    in other words
    the out put table columns should increase dynamically based on number of tcodes entered
    in the input
    how to do this?
    Edited by: tummala swapna on Apr 7, 2009 11:55 AM

    This may be useful to you..
    FIELD-SYMBOLS : <FS_TABLE> TYPE ANY TABLE.
    DATA: DREF TYPE REF TO DATA,
          WA_DREF TYPE REF TO DATA,
          DY_LINE TYPE REF TO DATA,
          ITAB_TYPE TYPE REF TO CL_ABAP_TABLEDESCR,
          WA_TYPE TYPE REF TO CL_ABAP_STRUCTDESCR,
          STRUCT_TYPE TYPE REF TO CL_ABAP_STRUCTDESCR,
          ELEM_TYPE TYPE REF TO CL_ABAP_ELEMDESCR,
          COMP_TAB TYPE CL_ABAP_STRUCTDESCR=>COMPONENT_TABLE,
          COMP_FLD TYPE CL_ABAP_STRUCTDESCR=>COMPONENT,
          OTAB TYPE ABAP_SORTORDER_TAB,
          OLINE TYPE ABAP_SORTORDER.
    BEGIN DYNAMIC STRUCTURE FOR FINAL INTERNAL TABLE @@@@@@@@@@@@@@@@@@
    STRUCT_TYPE ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME('table or structure name').
    COMP_TAB = STRUCT_TYPE->GET_COMPONENTS( ).
    STRUCT_TYPE = CL_ABAP_STRUCTDESCR=>CREATE( COMP_TAB ).
    ITAB_TYPE = CL_ABAP_TABLEDESCR=>CREATE( STRUCT_TYPE ).
    CREATE DATA DREF TYPE HANDLE ITAB_TYPE.
    ASSIGN DREF->* TO <FS_TABLE>.
    END DYNAMIC STRUCTURE FOR FINAL INTERNAL TABLE @@@@@@@@@@@@@@@@@@

  • Set Report Title in Center Dynamically

    I have 3 crosstabs in WEBI report and the column of those tables are changing dynamically. So how can I set my report title in center when the report is changed.
    Please help me.
    Thanks in advance

    You cannot do it unfortunately. It can only be achieved in horizontal and vertical tables.

  • Changing values based on input

    I have a form with a input field labeled Single Qty and a
    field labeled Unit of Measure, which defaults to EACH.
    We have addes a new field labeled Multiple Lots Qty.
    What needs to happen now is that if an entry is made in the
    Single Qty field, the Unit of Measure remains EACH. If an entry is
    made in the Multiple Lots Qty field, then the Unit of Measure
    should change to LOTS.
    How do I do this ?
    Thanks

    "If I input a value into the multiple lots qty, I want the
    unit of measure to be replaced by Lots, in the unit of measure
    field, before the form is submitted.
    I know the unit of measure can be determined after the form
    is submitted, but I need it to display on the form before it is
    submitted, if possible. "
    If you want to change the values "before" the form is
    submitted, you need to use javascript..
    If you dont understand how to use
    document.myform.formname.value, then I would reccommend learning
    some basic javascript before you start writing code with it.

  • Use of Presentation Variables in Navigated Report Title

    Hi All,
    It's regarding the presentation variable in report title. I have value interaction to another report based on Prompted values. But when we click on the value it will go to another report page and giving the results, but the title view is not changing as per the requested value. The title should change dynamically, but it is showing the P.Variables in place of prompted value.
    Below are the ways i have used the P.Variables:
    @{brand1} at @{customer}, @{sensitivity}% Sensitivity
    @{brand1}{'Prod'} at @{customer}{'CVS'}, @{sensitivity}{'15'}% Sensitivity -----(default values here)
    Version : OBIEE 11.1.1.5.0
    Could you provide me the solution for this issue.
    Thanks in Advance,

    Hi,
    You can use the presentation variable when you are passing the value from the prompt and filtering after
    clicking on the 'GO' or 'APPLY' button. So that assigns one value and is passed in the report in the
    page used.
    What you need to do is you need to have the 'is prompted' for the column used in the title
    or you can make the column is equal to @{pres_var}.
    But still if you dont use the columns in the report and you dont want to filter the report with the title columns
    then you can use narrative view with all the columns used in the title and have 'is prompted' and make its formatting similar to title view and save as a separate report
    And place the narrative view above the report
    Regards,
    MuRam

  • Plot a chart dynamically based on the values selected

    Hi All,
    I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
    Thanks in Advance

    Hi,
    Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
    As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
    Thanks,
    Sanjay

  • How to change report title dynamically??

    Hi,
    I need to change the report title dynamically. The report title must contain the value of a particular culumn in the same report.
    ex:
    col1----col2
    123----abcd
    Report title should be report123
    Thanks

    Hi BIPUser,
    Thanks for your answer.
    @1 in title view is not working. It shows @1 in the title view.
    But Narrative view is working fine.
    Thanks again
    Have great weekend
    Edited by: bob123 on Apr 2, 2010 8:41 AM

  • Dynamic report titles

    I notice that when you create a report, you can only enter a static title but I want the title to be dynamic (based on SQL). What's the best way to do this AND have it displayed over the report table ? Create a "Display Only" item? Create a one line report that displays the title?

    found the answer:
    Region Title Customization

  • How to configure drop-down that change dynamically in Call Scripts

    Hi,
    Would like to know as how to configure drop-down choices that change dynamically based on customer response in Call Scripts / Assessment Scripts of type "Service Request - Survey".
    I've read the following from CRM OnDemand pdf but was not able to figure out how to do that.
    Call Scripting:
    • Reduces agent training time
    • Provides drop-down choices that change dynamically based on customer response
    • Supports personalized interactions based on existing record data
    • Facilitates up-selling and cross-selling
    • Does not require third-party software
    I don't have a concrete requirement as of now, but was trying to check as how it works. Please guide me if any one has implemented the same.
    Thanks in Advance,
    Cheers!!!
    Deepak Veeravalli.

    Arun,
    If you plan to implement the "Querying the Active Directory" based on my code snippet,
    and if you do not have permission [your account must be the part of domain admin] to do so,
    Then still you can do it in least effort through code,
    string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
    <Users><User ID="2" Sid="" Name="Administrator"
    LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
    You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
    * User must be logged into the site at least once.
    Murugesa Pandian.,MCTS|App.Devleopment|Configure

  • ALV heading should change based on the input

    Hi Experts,
    how to change the column heading in my ALV report with respect to the input
    fields.....based on my inputs the column's heading should change....
    also , I need to display the values fetched from dbtab as
    heading in my ALV o/p. Please advice is it possible ( please don't advice in OOPS )
    and below this heading I need to display its corresponding values.
    My functional has asked me to refer t-code IE03.
    Thanks
    Karthik

    Hi there Karthik , Try something like  these .
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
          i_structure_name       = 'ZSTPASSOS'
          i_client_never_display = 'X'
        CHANGING
          ct_fieldcat            = field_catalog.
      LOOP AT field_catalog INTO wa_catalog.
        CLEAR wa_cat_batch.
        CASE wa_catalog-fieldname.
          WHEN 'TIPOCONSTR'.
            wa_cat_batch-text_fieldname  = 'Tipo de constr. Red' .
            wa_catalog-outputlen = '20'.
            MOVE: text-005 TO wa_catalog-coltext,
                  text-005 TO wa_catalog-reptext.
            wa_cat_batch-reptext_ddic = text-005.
          WHEN 'LONGPREVRED '.
            wa_catalog-outputlen = '20'.
            MOVE: text-006 TO wa_catalog-coltext,
                  text-006  TO wa_catalog-reptext.
            wa_cat_batch-reptext_ddic =  text-006.
          WHEN 'NOACOMASOC'.
            wa_catalog-outputlen = '20'.
            MOVE: text-007 TO wa_catalog-coltext,
                  text-007 TO wa_catalog-scrtext_s.
            wa_cat_batch-reptext_ddic = text-007.
          WHEN 'TIPORAMAL'.
            wa_catalog-outputlen = '20'.
            MOVE: text-009  TO wa_catalog-coltext,
                  text-009  TO wa_catalog-reptext.
            wa_cat_batch-reptext_ddic = text-009.
          WHEN 'TIPOACOM'.
            wa_catalog-outputlen = '20'.
            MOVE:  text-008 TO wa_catalog-coltext,
                   text-008 TO wa_catalog-reptext.
            wa_cat_batch-reptext_ddic = text-008.
          WHEN 'LONGPREVACOM'.
            wa_catalog-outputlen = '20'.
            MOVE: text-010  TO wa_catalog-coltext,
                  text-010   TO wa_catalog-reptext.
            wa_cat_batch-reptext_ddic = text-010.
        ENDCASE.
        MODIFY field_catalog FROM wa_catalog
                             TRANSPORTING  outputlen  coltext reptext scrtext_l scrtext_m scrtext_s .

  • How to add column dynamically based on user input in oracle?

    **how to add column dynamically based on user input in oracle?**
    I am generating monthly report based on from_date to to_date below is my requirement sample table
    EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
    100001.............John...........02-OCT-12...............6
    100002.............chris...........01-OCT-12...............4
    Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
    below is my code
    create or replace
    procedure MONTHLY_LVE_NEW_REPORT_demo
    L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
    --L_LEAVE_TYPE_CODE           IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
    L_DEPARTMENT_CODE IN VARCHAR2,
    --L_MONTH                    IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
    L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
    L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
    MONTHRPT_CURSOR OUT SYS_REFCURSOR
    AS
    O_MONTHRPT_CURSOR_RPT clob;
    v_return_msg clob;
    BEGIN
    IF (L_BUSINESS_UNIT IS NOT NULL
    AND L_FROM_DATE IS NOT NULL
    and L_TO_DATE is not null
    -- AND L_DEPARTMENT_CODE IS NOT NULL
    THEN
    OPEN MONTHRPT_CURSOR FOR
    select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
    NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
    case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
    from
    SELECT DISTINCT a.employee_code,
    a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
    a.DEPARTMENT_CODE,
    a.DEPARTMENT_DESC,
    B.LEAVE_TYPE_CODE,
    B.LVE_UNITS_APPLIED,
    B.CREATED_DATE as CREATED_DATE,
    DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
    DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
    b.status
    from SSHRMS_EMPLOYEE_DATA a
    join
    SSHRMS_LEAVE_BALANCE C
    on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
    and C.STATUS = 'Y'
    left join
    SSHRMS_LEAVE_REQUEST_TRN B
    on
    B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
    and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
    and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
    and B.STATUS in ('A','P','C')
    and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
    and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
    join
    SSHRMS_LEAVE_REQUEST_TRN D
    on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
    and D.LEAVE_TYPE_CODE in ('CL')
    AND D.LEAVE_TYPE_CODE IS NOT NULL
    group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
    else
    v_return_msg:='Field should not be empty';
    end if;
    END;
    my code actual output
    EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
    100001....................John............02-OCT-12.................6
    100001....................chris...........01-OCT-12.................4
    how to add column dynamically based on from_date to to_date?
    Thanks and Regards,
    Chris Jerome.

    You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

  • How to report with different time zone dynamically based on user's account?

    Hello
    I am wondering is there a way to change the report's date & time data based on user's locale setting in OBIEE?
    Let's say the user log in to OBIEE with eastern time zone setting. The data that's in the database is storing a transaction of $400 at 1am Pacific time.
    So when this user run a query which does something like 'select date, transaction, amount from date, transaction, sales where this = that', it should display the $400 amount done at 4am eastern time instead of 1am pst.
    What I have done is to have data stores in date dimension to be UTC time, and I have also changed the data type of the date column to be 'local time zone'. DB is Oracle DB 11G now.
    Now this query works perfectly well in the DB as long as I run the following commend first:
    Alter session set time zone = 'whatever my time zone'
    and then
    Select date, transaction from tables..
    The date displayed will automatically be converted into different time zone..
    Since everything is working nicely from Oracle DB level, I need to know how to make it work when OBIEE sends the same query down to the DB..
    I know that, probably I will have to enter the above alter session commend in the connection pool, however, I can't hardcode the time zone value.
    I also don't want to store user's time zone in the user table because these users travels a lot. So even if his table setting is EST, but at a given day he can be traveling to pst time zone and view reports.
    Is there a way to dynamically set the time zone based on user's account locale setting?
    Let me know if you guys have implemented something similar or not
    Thanks

    garuda wrote:
    Hello Sarvan
    I have already done that part at the DB level and it is working perfectly with alter session commend before the query.
    My question is, how do I configure OBIEE so that before each user runs a report from BI, the alter session commend will be fired with each user's personal locale time zone setting passed through so that each user will be able to view data according to their different time zone?did you tried with Connection scripts(Execute On connect) in Connection pool.write ur Alter commend to Change Time Zone in this script box.

  • Insert dynamic variable in report title?

    Hi
    I am new to Discoverer. I have created a report that displayed a set of data based on the value of last month. So I have created a calculation that gets the value of last month:
    LAST_MONTH = TO_CHAR(ADD_MONTHS(TRUNC(SYSDATE,'MM'),-1),'MON/YYYY')
    I then use the value of LAST_MONTH to select dates from my data where DATE LIKE LAST_MONTH.
    But I want the report title to actually have the value of LAST_MONTH in it, so it actually says something like
    Report for NOV/2009
    dynamically etc.
    Is this possible?
    Thanks
    Lee

    Hi Lee
    To add to what Rod has said, which is 100% correct, let me explain why.
    In order to get something into the title of any report or document, whether this be Word, Excel, SQL or even Discoverer, that something must be applicable to all of the values currently displayed on the page of the report. Whereas Word or Excel will allow you to manually place something into the title, Discoverer does not. In order for Discoverer to allow you to place something into the title it must either be a Page Item or a Parameter. This is because Page Items and Parameters are guaranteed to be unique to the page of the report being displayed. Thus, if you had more than one Page Item, as you move from one to the next the title would dynamically change. When you have a fixed value or calculation, such as your LAST_MONTH, you still need to display it in the Page Items in order to place it on your title.
    To make a Page Item or Parameter display in the title you simply type the & character followed by the name of the item as it appears in the Page Items or by the name you gave the Parameter. Case is import too so last_month is not the same as LAST_MONTH.
    Whenever Discoverer encounters the character & in the title it starts looking for a Parameter or Page Item named by whatever is following the &. If it finds a match it displays the value. It no match is found then it literally displays whatever you typed. Any additional characters that you type after a successful match are also display literally.
    For example: suppose you Page Item is called LAST_MONTH and the value was NOV-09 but in the title you typed &LAST_MONTHS then what will display would be NOV-09S. However, if you typed $last_months then you will literally see &last_month in the title.
    I hope this helps.
    Best wishes
    Michael

  • Bex report to report interface dynamically based on Value in the query

    Hi,
    Is it possible to change the destination of the report to report interface dynamically based on the data of the bex query?
    For example my query has the below data
    Plant | KPI | Quantity
    P1 | A | 20.00
    P2 | B | 25.00
    When the user selects KPI A I want to navigate to Query 1, and when KPI B is selected to Query 2. Query 1 and Query 2 have completely different layouts, Instead of create to two destinations is it possible to pick one based on the KPI selected.
    Is this possible in Bex report to report interface or any other way.
    Please suggest
    Thanks in advance.

    Hi
    we have RRI in sap bw. ( TCODE RSBBS.)
    Below article will enlighten you about this topic .
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?quicklink=index&overridelayout=true
    hope this helps

  • Change the report title to more meaningful title? How to achieve it?

    Hi Guys,
    We have some BI reports which the users runs from BEx analyser. Currently the report title shows the names of the reports. For example a Sales by products reports has the title SALES BY PRODUCT REPORTING.
    What we want to do is these reports have selection screen and based on what the user selects on the selection screen we want the report title to be more meaningful. For example if the report is run for the period 1 and company code ABC selected on the selection screen then the report title must show SALES BY PRODUCT FOR PERIOD 1 AND COMPANY CODE ABC.
    My questions is how to show the variable in the report title? I am new to BI and need help on the same. We are on 7.1 version of BI.
    Cheers
    VJ

    Hi,
    We have done the same but in my case the input Month will display.
    Eg: We have MM reports which will run Period wise, so user wil give 001.2009, in the report title it will display...
    Stocks report for 001.2009.
    Using Text Variable we can do it.
    Steps;
    1. Create a Text Variable with Customer Exit option.
    2. Take the user input value and pass into Custome exit Variable.
    For Sample Code, you can see one blog and some Articles.
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    See the blog "Using Text Variables with Customer Exits in Report Headings" and see Customet Exit articles..
    WHEN 'ZT_C'.   " ZT_C = Text variable with customer Exit
        IF i_step = 2.
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZMONTH'.  " ZMONTH = User input variable on 0CALMONTH
            IF sy-subrc = 0.
              CLEAR: l_s_range.
              zsmy = loc_var_range-low.
              zemy = loc_var_range-high.
              zsmnth = zsmy+4(2).
              zemnth = zemy+4(2).
              zfyear1 = zsmy+0(4).
              zfyear2 = zemy+0(4).
              CONCATENATE zsmnth '.' zfyear1 INTO zsmnyr.
              CONCATENATE zemnth '.' zfyear2 INTO zemnyr.
              l_s_range-low+0(7) = zsmnyr.
              l_s_range-low+9(2) = 'To'.
              l_s_range-low+13(7) = zemnyr.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'BT'.
              APPEND l_s_range TO e_t_range.
            ENDIF.
          ENDLOOP.
        ENDIF.
    Thanks
    Reddy

Maybe you are looking for

  • Cannot print with HP Laserjet 2200 on network

    I run software update periodically and downloaded the HP driver update when it was offered. I uninstalled the Laserjet 2200 that worked with 10.5.8 in the print and fax system preferences and reinstalled it. It is recognized and I get the correct ima

  • Schedule actions automatically- using selction report

    Dear Experts, I am facing the problem during the Background job scheduling for CRMC_ACTION_JOB using selection report for missed deadline. I have configured the action condition by using the selection report.  In Tcode- CRMC_ACTION_JOB I have schedul

  • Cut-Off

    When some one callls and your on a dial-up connection, does the iBook have software that has a little pop up saying incoming call and gives u a choice to bypass the call or disconnect internet and answer the phone? If you can understan what im saying

  • Material Status during POD

    Hi ALL, I want to know what will be the status of Material in System once it leaves the Plant after PGI & Billing is to be done after POD. This specially required while looking at the sale done for the month on 1st of the next month (POD setting is f

  • No Airport Express since I downloaded the lest version of Itunes

    I have just downloaded the latest version of itunes 6.02.23 and have now lost visibility of my airport express speakers. This happened to me after downloading 6.01 also. Has anyone else experienced this?