Report to see in transit stock .

Hi Gurus
Is there in any standard report ,by which I can make out how much stock is in transit on the material group level-:
1. b/w the plants
2. b/w the vendors for which inbound delivery has been created ,but the GR has not been done.
Thanks in advance
Nitin Chhabra

Hi
Use MB5T - for Stock in transit
You can use MB52 also which will display the materials in  transit based on group.
V_UC_7 - Incomplete Inbound Deliveries
VL06I - Inbound Delivery Monitor
VL06IG - Collective Processing Via Inbound Delivery Monitor
These 3 reports can be used, based on the requirements
Thanks & Regards
Kishore

Similar Messages

  • Report to see total stock transfer value

    Hi,
    Is there any way where we can get a consolidated report to see the total value of stock transfer between two company codes.
    say there are two company codes A and B.
    A is procuring from B.
    So , i want the total value of procurement.
    Thanks,
    Kumar

    Hi Shiva,
    Thanks for the quick response. In MB5L / MB5W we can see all the stocks existing in the company code.We can give the material number but the problem with this is the same material can be manufactured or can be procured from other company.
    Thanks,
    Kumar

  • Report for material aging  in stock

    Hi ,
    I need to create batchwise  material aging report availible in stock. I am fatching most of fields from mseg table and I am taking ERFMG from mseg  for stock availibility.
    Is am going in right direction. please guide me for this.
    Regards,
    Seema.
    Moderator Message: Why dont you consult your Functional Consultant on this?
    Edited by: kishan P on May 19, 2011 12:31 PM

    Re: Opening & Closing Stock in transit
    STOCK IN TRANSIT
    Re: reverse the Stock in transit
    In- transit stock

  • Report  from system on different stock levels-min, max stock levels

    hI gURUS,
    Is there any Standard Report  from  SAP system to see on different stock levels-minIMUM stock, maximum stock levels

    Hi,
    MMBE will not give stock level min and max  that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
    Regards
    Sangeta

  • Report for Storage location wise Stock with value..?

    Hi guru's
    Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK  with VALUE..?
    Urgent reply me  ..
    Thanks
    sap-mm

    Sorry Mr chetan,
    I want to see only the stock available in my company with Value and storage location wise..
    Please try to get report for this
    Thanks
    sap-mm

  • MM-Report to see the materials which is not used from last 3 months

    Dear All,
    I want to find out the materials which are not used from last 3 months.Is there any report?
    Thanks
    Vishal

    Hi
    check MB5B
    give material and plant there
    select valuates stock radio button and NON-Hierarchical representation layout  on selection screen
    give last three month duration period on selection screen and execute report
    and see total  Goods receipt and total goods issue for material
    Regards
    kailas ugale

  • Transaction to see the Open stock transfer order for the plant

    HI ,
    i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
    I need how to cretae the stock transfer order for the material , whci material master is required for this process.
    please give me step by step details for this .
    regards
    satish
    Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

    Hi Satish,
    You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
    Steps for Intra company stock transfer:
    This is only within the comp.code(w/o SD)
    (w/o SD) 351101 MvT. and (with SD) 641101
    1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
    (1 by1 )
    In Receiving plant (1100)
    Customer num. 123345 (for ex.)
    Sales org. yyy
    Dist. Channel yy
    Sales div. y
    In Supplying plant (1000)
    Customer num. -
    (don't fill)
    Sales org. yyy
    Dist. Channel yy
    Sales div. y
    5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
    6.Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries
    Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
    7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide "out bound delivery num".
    10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
    11. See the stock overview in the receiving & supplying plants.
    Steps for Inter company Transfer:
    1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
    2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
    3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
    4)then For your supplying Plant and receiving Plant assign Document type NB
    5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
    6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
    these are the configuration settings you have to do in background.
    Then Create STO from Receiving Plant in ME21N with document type NB.
    Based on that STO, Create Delivery in VL10B from supplying Plant
    Do PGI in VL02N from Supplying plant
    Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
    Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
    Regards,
    Prasath

  • Receiving from Transit Stock

    Dear MM colleagues,
    We are in an environment were 100 plants receive from our central warehouse via an STO.
    Currently everything from the NL Deliveries is posted in one step. We are trying to do this in two steps.
    So for one plant I have switched off the checkbox for the one-step procedure.
    Basically I know how the In Transit Stock works. I know how after Post Goods Issue my stock is there and visible in MB5T.
    Also I know how the receiving Plant can receive it from Transit into its own stock through MIGO referencing the STO or the Delivery.
    I am looking for a way to do this in a background mode, therefore I am also looking for a proper selection/ variant for the receiving plant to find its document every day. MIGO does not seem to offer this. Or does it? And are ther other ways besides MIGO?
    Thanks for your thoughts,
    Nickelodeon (Sandeep)

    I think you'll definitely need to bespoke most of this. For example, do you want a bespoke table with a maintain transaction where you define the lead time in days (or hours) from the main Plant to each of the others.
    You then need a program to check the documents posted in the last (say) 10 days and to check where the material is still in transit (see MARC-TRAME). You then check your bespoke table to see if the GR at the receiving Plant should be posted and if so do this using one of the Function Modules Jurgen references.
    (Incidentally MB1C is the 'old' transaction, you can process this in background).
    It's not quite that straight forward either, as if you have overlapping stock in transit for the same material and Plant, potentially you could post a GR early e.g.
    Transit time = 2 days
    Day 1  100 sent  SIT = 100
    Day 3  200 sent  SIT = 300
    Day 3 post GR for 100  SIT = 300
    Day 4 post GR for 100  SIT = 200  (as there is no flag to say the first material document is no longer relevant)
    Day 5 attempt to post GR for 200 but get failure as 100 already 'accidentally' posted the day before
    So potentially you need some way to set a GI material doc. as no longer relevant etc. etc. Potentially you could get the program to discard material documents based on the lead time in your bespoke table to prevent this.
    Good luck, however you choose to do it.
    Regards,
    Nick

  • Report to see parked documents as of a certain date

    Hi All,
    Is there any report to see list of Paked documents, as of a certain date.
    Say for example, document XYZ was parked as on 5th March, but now it is posted.
    So if I run the report giving the date as 5th March, it should show me that doc.
    Is there any such kind of report existing?
    I have checked fbv3, but it gives the parked documents as of todays date. So Please let
    me know, if there is any existing report like this, or the feasibility of creating such a report.

    Hi
    Please check the below mentioned link
    Parked document table
    VBKPF - Document Header for Document Parking
    VBSEG - Document Parking Document Segment - General Structure
    VBSEGS - Document Segment for Document Parking - G/L Account Database
    VBSEGK - Document Segment for Vendor Document Parking
    VBSEGD - Document Segment for Customer Document Parking
    VBSEGA - Document Segment for Document Parking - Asset Database
    hope it will help you
    Regards
    Praveen
    Edited by: Praveen Chirakkel on Mar 28, 2011 9:11 AM

  • MB5L Report Discrepacy for Material and Stock Account Currency

    I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

    Hi,
    Here's some information from help. Variances can occur for the following reasons:
    You have entered postings to the stock account manually.
    The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
    Check Account Determination - OMWB
    The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
    Cheers !

  • Required Standard report for Deliveries Made vs Stock Transfer POu2019s

    Hi,
    Is there any standard report for Generate Daily Report detailing Deliveries Made vs Stock Transfer POu2019s...
    Plz help.

    Hi,
    Using MKPF table take all material document, then usign the doc no (mblnr) take data from MSEG table
    with movement type 641 and 642 in case of reversal (STO). 101 and 102 for (Delviery) .
    take STO po of above movement type from table EKPO with PSTYP (item cat, field ) = 7. Comparing sto and delivery details and you will get the output.

  • Report by month with Valuated stock and special stock by storage location

    Dear All,
    I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
    I try it with MCBE tcode, but i only get  "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
    Does anyone know how can solve it?
    Thanks in advance,
    Sebastiá

    Hi,
    Use MC.9 T.code.
    click on "switch drilldown" and select storage location.
    Regards
    Hari

  • Do we have standard report to show sale order stock with amount?

    Do we have standard report to show sale order stock with amount?
    I try to use MB5B and MBBS but they don't show value.
    MB5B show only qty
    MBBS no any report.
    Please kindly help.
    Thank you very much.

    Okay Thank you very much for your suggestion.
    I think I have to create a new ZProgram. T_T

  • Report to see the output of VLPOD transaction

    Hi Gurus
         I have configured Proof of delivery concept to caputre loss of Quantity due to moisture. can any body tell me about standard report to see the output of VLPOD transaction.Full points for the correct solution.

    Hi,
    Try the t-code VLPODL, hope can help you!
    Good day
    Tao

  • SAP report to see orders who have been TECO'ed

    Hi All,
    I am looking for a sap report to see all the orders that have been TECO'ed by date & plant. I know i can use COOIS & CO26 but i need something that will give me more options to exclude report output by more status types. Using these reports i can only select upto 2 statuses(for instance include status 'TECO' & exclude status 'OPEN'). Any help would be greatly appreciated & duly rewarded.

    THis can be easily done in COOIS screen in the header level status option just maintain TECO and in the next TAB right to it write OPEN and mark exclude.
    Hope this will help
    Regards
    AM

Maybe you are looking for