Report with stored procedures is unable to run in infoview.

I developed report for my current employer using stored procedures and saved it to Enterprise environment. When running this report I am getting following Error in Infoview:
Error in File ~tmp26285c856bf1180.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: -674 ]
I can run my same report in Crystal Reports. Previous developer was using data source tables instead of stored procedures and report with tables were running successfully in infoview. What should I need to do in order to recognise my stored procedures in Infoview.
We use informix databases.
Regards,
Rashid Khan

The above issue have been resolved the issue. The problem was our BO administrator changed the Database server on CMC and my report in infoview was failing because of my stored procedure was not found on new database.

Similar Messages

Report with Stored Procedure does not return until refresh

I'm using RAS server 2008 to run many Crystal reports from a web application (TrackWise) over Oracle 10g DB.
A new report is using a stored procedure that takes several minutes (5-10) to return before the rest of the report's SQL can execute.
When running the report from Crystal Developer there is no problem,
but when running from the application (using the RAS), the report seems to be running forever,
However, if you wait a few minutes for the DB utilization to drop (i.e. for the stored procedure to finish) and refresh - the full report appears on the screen in a second.
Since I have many other reports that run for much longer time with no issue, I assume that this has nothing to do with the web application, but rather related to the connection between the RAS and the DB (i.e. the idle time between the beginning of the stored procedure execution to its return and the continuation of the report creation).
I assume that I need to change one of the RAS settings/ parameters (in the properties or in the registry), but which?
Please assist.

Since this app is from TrackWise, I'd recommend contacting TrackWise and see if they have an answer for you. As it is, we have no idea how they implemented the CR components in their app. If they cannot help you, it should be them coming here and asking us - or better yet they should be creating a phone incident.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Passing parameters from vb form to a crystal report with stored procedure

Can someone give me an idea how to use data inputted on vb form to be use as basis of crystal report generation which loads data from a stored procedure. Stored procedure has parameters that was also set in the crystal report. viewing on crystal report is ok but i am having difficulty running the report from vb.

Hi John,
              If Not CRRpt.ParameterFields("AgeType") Is Nothing Then
                    CRRpt.ParameterFields("AgeType").CurrentValues.Clear()
                    Dim ParamValue As new CrystalDecisions.Shared.ParameterDiscreteValue
                    ParamValue.Value = AgeType.ToString
                    CRRpt.ParameterFields("AgeType").CurrentValues.Add(ParamValue)
                End If
Note that the ParamValue.Value should be assigned with exact same data type as you declared it in CR.
If it is string, Convert your Variable to string first.
If it is date, make sure you are passing a date variable.
and so on...
Regards
Edy

Executing a report with stored procedure causes error

Hello,
I've got a .NET application where a report gets generated from an .rpt template using Crystal Reports. A template has been created using the fields from stored procedure. While creating the template, I've been working with my DEV environment DB server, and with that server the .rpt has been saved. Within the Designer, I can preview the report, all working fine.
Using the template with my application, if I set in the code for crystal connection to use the same DB server as has been saved with the .rpt, the report runs and I do get the result in my application as expected. But if I move my code to other environment, using another DB server (but not changing anything in the .rpt), while running the report in the application I get the following error:
Exception: CrystalDecisions.CrystalReports.Engine.InternalException
Message: Failed to open a rowset.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for SQL Server
Description: Could not find stored procedure 'BreachOfAgg'.
SQL State: 42000
Native Error:
Failed to open a rowset.
Error in File C:\Windows\TEMP\Breach of Aggregate Stop Loss {196B84E5-7DAE-465E-A12D-5C70DDC04CE5}.rpt:
Failed to open a rowset.
Source: CrystalDecisions.ReportAppServer.DataSetConversion
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName)
   at IFG.ReportsModule.Reporter.CrystalReporter.Export(OutputType outputType, HttpResponse response, String reportName, Boolean asAttachment)
   at IFG.ReportsModule.Reporter.CrystalReporter.Export(OutputType outputType, HttpResponse response, String reportName)
   at IFG.ReportsModule.Proxies.CrystalReporterProxy.ShowResult(OutputType outputType, HttpContext context, CrystalReporter cr)
   at IFG.ReportsModule.Proxies.CrystalReporterProxy.ExecuteReport(ParametersValues parameters, OutputType outputType, HttpContext context)
   at IFG.Web.GetReport.GenerateReport(Int64 reportID) in d:\Jure\PSL\iFish\IFISHRSF\IFISHRSF0100\Root\5. Development\IFISH Portal\SDRMA New\Portal\web\admin\RSF\GetReport.aspx.cs:line 82
   at IFG.Web.GetReport.Page_Load(Object sender, EventArgs e) in d:\Jure\PSL\iFish\IFISHRSF\IFISHRSF0100\Root\5. Development\IFISH Portal\SDRMA New\Portal\web\admin\RSF\GetReport.aspx.cs:line 48
Nested Exception
Exception: System.Runtime.InteropServices.COMException
Message: Failed to open a rowset.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for SQL Server
Description: Could not find stored procedure 'BreachOfAgg'.
SQL State: 42000
Native Error:
Failed to open a rowset.
Error in File C:\Windows\TEMP\Breach of Aggregate Stop Loss {196B84E5-7DAE-465E-A12D-5C70DDC04CE5}.rpt:
Failed to open a rowset.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
If I open in the Crystal Designer the rpt and change the DB to my new server, and then run the report in the application using that same new server, the report runs ok and I do get the results. As well, I don't have this problem using tables or views in the report. Independent of what server has been used while created the .rpt in the Designer, I get the report ran and presented according to the server that I point to within my code.
I hope someone can help me out with thi.
Thank you.
Jure

Hi Jure,
All I can suggest now is you try this [app|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]:
It will get the connection if you need.
If that doesn't work the purchase a support and Rep can connect to your PC to see what is going on...
Thanks
Don

Crystal Reports with stored procedures

Hello Members,
I have come across a unique problem (only for me I guess). When I develop a report using a sql command (with sql script), I can run this report against any server or any datatbase dynamically with out using the "Set Data Source Loaction" found under database fields in field explorer. This report is based on a stored procedure and uses a OLEDB connection. When I developed this report for the first time, I defined its database connection (servername,database). Now I have created a same procedure with the same name on different server under a different database. I wanted to run this report against the new server, but I am getting an error " Failed to retrieve data from database". If i click OK on this pop up window. It displays another pop up window and says the old database name is not found in the new server. The criteria is the report should be able to run on any database on any server if the same stored procedure exists in there just like the report with sql command runs. How to solve this problem ?
Thanks in Advance!!!!

Hi Raghavendra,
I know that is one of the way to do this ands it is manual process. The problem here is different clients will be running this report. Each client's data is located on different server and different database and this update process should be done automatically. Do you know any way to do this ?
Thanks!!!!

Switching Data Source for a report with stored procedure

Post Author: ysbn
CA Forum: Data Connectivity and SQL
I've created a report and deployed it on a Crystal Server. The report is based on a certain stored procedure which also exists on other DB machines in my environment (Oracle machines). When I try to switch my report object to work with other machines (not the one originally used when the report was designed) the activation of the report fails. The error I see in the preview window is:
Error in File <my rpt file name>: Failed to retrieve data from the database. Details: [Database Vendor Code: 6550 ]
When I try the same thing with a report which is based on a view and not a stored procedure the switching of Data Source works perfectly.
Is there a problem switching between data sources from the server when the report is based on stored procedure? Are there any configurations I need to do in order to support this scenario?
Thanks!

Hi everyone~
i am now facing the same problem
i am using CR2008 and Visual Studio 2008 c# to write a window program
because we have 2 db environment (one is production , the other one is development) so i have set a prarameter to switch db connection in c# code.
the database is Oracle, and the the report will connect to Oracle procedure (which it is stored in package) this procedure will return reference cursor, so the report will loop up this cursor to generate report.
at first time, it work fine when i open the report in CR2008 designer and point to dev database (ie datasource point to oracle procedure) . but when i want to deploy this win application to client and point to prod database, it show (vendor error 6550)
i found that i cannot change the datasource during runtime in c# code...
am i miss something in code? here attached a part of this code...
private void setDBLogonForReport(ConnectionInfo info, ReportDocument doc)
            Tables myTables = doc.Database.Tables;
            foreach (Table myTable in myTables)
                TableLogOnInfo logOnInfo = myTable.LogOnInfo;
                logOnInfo.ConnectionInfo = info;
                logOnInfo.TableName = myTable.Name;
                myTable.ApplyLogOnInfo(logOnInfo);
                //myTable.Location = info.UserID + "." + "pkg_crystal_report." + myTable.Name;
                //someone suggest i have to set the 'Location' for change the datasource, but i am not sure how to construct a
                //string for point to oracle prcedure
i will check it freq ... hope any expert can give me some advice ~
thank you very much!!!

Problem With Stored Procedure

Post Author: Ranjith.403
CA Forum: General
Hi,
Am new to crystal reports with stored procedures
am created a report using a stored procedure in oracle. In that Stored Procedure am Using a temporary table.
After inserting values into the table am assigning to ref cursor.
Refcursor having fields like item,onhandstock,purchase rate
This report working fine in oracle version 9.2.0.1.0 where comes to oracle version 9.2.0.8.0 it's giving the varchar values correctly.
The Number values are showing as 0.
Help me to solve it.
Thanks in Advance,
Ranjith

Try modularising this large procedure into smaller procedures and functions, and determine which part is causing you trouble.

Run report in stored procedure

Could anybody help me to run the report in stored procedure? I
created a report in the way below:
start report builder-> build report manually->(object Navigator)-
program unitcreated a pachage spec and body
When I go to the live viewer, it asked to create a layout, but
the it asks a sql statement if I go layout model.
Is there any way to run this report or I did something wrong?
Also, how to run a stored procedure from the database, please
provide as many details as you can since I am new to report.
Any help will be greatly appeciated

hello,
i am not quite sure if i understand you correctly, but in oracle
reports you do not create a report using PLSQL packages.
you define a datamodel and then create a layout. the best way is
if you run through the wizard to create a first version fo the
report.
regards,
the oracle reports team --pw

Problem while running the report from stored procedure

Hi,
I using stored procedure to generate my report.
my stored procedure's code looks like this.
CREATE OR REPLACE PROCEDURE PROJECTOVERVIEWREPORT1(query in VARCHAR2)
IS
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
myStatus SRW.Status_Record;
BEGIN
srw.start_Debugging;
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://localhost:8888/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','rep_kalyan1');
srw.add_parameter(myPlist,'REPORT','BillFormat.RDF');
srw.add_parameter(myPlist,'USERID','atl3_dev_jul04/atl3_dev_jul04@mgi');
srw.add_parameter(myPlist,'destype','file');
srw.add_parameter(myPlist,'desformat','pdf');
srw.add_parameter(myPlist,'documentnumber','17181');
srw.add_parameter(myPlist,'papertype','N');
srw.add_parameter(myPlist,'desname','c:\temp\17181.pdf');
myIdent := srw.run_report(myPlist);
myStatus := srw.report_status(myIdent);
srw.stop_Debugging;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
NULL;
END PROJECTOVERVIEWREPORT1;
Iam running the oc4j instance and the report server in my local machine.
when i have typed http://localhost:8888/reports/rwservlet
Iam able to see the help page.
My rdf file is placed in OralceHome/reports/integ folder.
Iam executing my stored procedure it is returning some error.
Iam doing any thing wrong.
Do i need to modify anything.
Is the place of rdf file correct.
plz help me solving the above problem.
--Kalyan

This is the error message iam getting..
any idea????
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 *
* Debugging turned ON *************************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://localhost:8888/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_kalyan1
*** Length of Paramlist : 3
OK : Parameter added : REPORT=BillFormat.RDF
*** Length of Paramlist : 4
OK : Parameter added : USERID=atl3_dev_jul04/atl3_dev_jul04@mgi
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=file
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=pdf
*** Length of Paramlist : 7
OK : Parameter added : DOCUMENTNUMBER=17181
*** Length of Paramlist : 8
OK : Parameter added : PAPERTYPE=N
*** Length of Paramlist : 9
OK : Parameter added : DESNAME=c:\temp\17181.pdf
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built : http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statu
*** Submitting HTTP Request
*** using URL :http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statusf
ERROR : HTTP request failed

Error when linking report to stored procedure defined with one input parm

Error when linking report to stored procedure defined with one input parameter
The report will work ok, when the parameter is removed from the stpred procedure
An unhandled win32 exception occurred in crw32.exe[4480]
Stored Proc (sql server 2005)
USE [Allegro]
GO
/****** Object: StoredProcedure [dbo].[SP_Test]    Script Date: 07/08/2009 10:42:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
Begin
select
     valuation,
     valuationtime,
     valuationmode
from valuation
where valuationmode = @valuationmode;
End;

This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.

Sub report using Stored Procedure returns incorrect data

Post Author: rikleo2001
CA Forum: Data Connectivity and SQL
Guys,
I am using CR 9 in ASP.net application.
One simple report and one Sub report, sub report is basically linked with Stored procedure accepting one parameter and returns a select query.
Main report is linked with that sub report using that parameter field.
Sub report is on demand sub report.
Now when I execute that main report and click on on demand sub report I am getting Wrong order information.
Here is out put on main report
Order 1                                          on demandDetail
Order 2                                          on demandDetail
Order 3                                          on demandDetail
     NOW If I click on Order 3 (On demanddetail link, it displays rondom order details, some time correct on too), I am really stuck and don't know where I am going wrong.
Please help me to solve this issues.
Many Thanks

Post Author: rikleo2001
CA Forum: Data Connectivity and SQL
Hi Yangster,
Thank you so much for your reply.
On DEMAND Sub report is located in main report, IN DETAIL SECTION
I am passing Order ID from main report linked to {?morderid} in subreport under command object, and if I run it in design mode, it works perfectly alright, so problem is isolated to ASP.NET and Crystal report post back method on Crystal report.
The example I give to you this is a simple example to identify issues in my real application and report.
My main report contains summary of data base on unique identifier. that summary have 4 differant types of details which has to be on the same report (as Crystal report doesn't provide Nested subreport), so I decided to use 4 subreports on main report and all subreport using Stored procedure command object.(Sub report has it own complex processing requirement to fulfill).
Please help me with any further ideas? for the sample which I presented to you this is only using one SP on main report with a simple processing.
Many Thanks

How to generate a report from stored procedure

I would like to generate a report from stored procedure.
I used to work on sql server. this can be done as easy as put a select statement at the end of stored procedure.
The resule can be displayed on the development IDE, like sql developer or consume by Java JDBC client.
is there equivalent way to do this in Oracle stored procedure?

Hi,
What type of report you are looking..for.. ??
As you said that "I used to work on sql server. this can be done as easy as put a select statement at the end of stored procedure. "
When you execute it will return the result set and you will display directly on the FrontEnd.. Is my Understanding is correct Up to here.
See, In oracle you have call some custom stored procedures as you did in SQL Sever, but you have return the Results Sets, with help of Out put paramter, Either Cursors or Varrays..
or Else you can generate the Html reports based on your requirement, HTML can be used in the stored procedures of Oracle which will generate for your, you need to code it.
I could not able get the relevant link for your reference.
I will get back to you on this.
- Pavan Kumar N

Crystal Reports 2008 Stored Procedure and Parameters from LOVs

Quite simple report using stored procedure as data source. When editing some of the parameters we get this error when clicking OK to close "This stored procedure parameter can only accept multiple values. Please ensure that Allow Multiple Values is true."
As we all know stored procedure parameters do not access multiple values at all, so this message is very hard to debug. The report does work if we set the 'Allow Multiple Values' to true, but only when using exactly one value for the parameter. We have tried verify database and other things, but cannot find any way around this issue.
All ideas are appreciated as this is stopping us from utilizing the dynamic parameters.
Thanks, Stig

We managed to work around the issue by creating a new stored procedure. First we used the same parameter names and changed the data source to the new stored procedure. After renaming the parameter with the issue the problem then was resolved.
Note that another parameter that was earlier affected by this issue in the way that it could not be edited and saved due to the same error message now also works fine. This even if this parameter has not changed names.
Quite a complex situation to debug this. Maybe if the source of the error message is found in the code we could help testing.
Stig

Passing parameters to sub report's stored procedure

I'm attempting to pass values from the main report to a linked sub report's stored procedure, but I haven't been successful yet.
I know how to filter the parameters on the return set of the stored procedure, using parameters from the main report. However, I would like the stored procedure executed for each record of the main report, using those values passed.

I was getting "missing parameter values" trying to send parameters to a stored procedure in the subreport. Turns out there is a hot fix for my issue. Not sure if it matches what you're trying to do; you need to give more information on what you've already tried.
I was using CR XI, and also CR for VS 2005. The problem seems to be fixed with CR VS2005 SP1, for Visual Studio CR.
Look up under Business Objects Downloads: Crystal Reports > .NET > Hot Fixes
Files:
CRRedist2005_x86.msi
crvs05sp1.exe
Then open the report again, and re-save it.
This has fixed the problem for me.
Good luck!

Report with stored proc running multiple stored procedures with insert statement

Hi,
I wonder if this is possible in SSRS ... I use the 2012 version (Data Tools).
I have a report that triggers a stored procedure. See below.
Within this SP there are 2 insert statements getting data from 2 other SP's.
When I make a dataset referring to the main SP below, SSRS does not show me any fields at all.
Is this because it's a SP with insert statements and nested SP's?
At the end of the SP I make a select so it should see all the fields.
The parameters @month and @costcenter are multivalue params. I use a special function to convert the multivalues, selected in the report, into a string to pass it correctly to the query (comma separated).
USE [TestDB]
GO
/****** Object: StoredProcedure [dbo].[_Pink_SP_StandingsRegisterDataset] Script Date: 15-4-2014 13:31:30 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[_Pink_SP_StandingsRegisterDataset]
@year INT,
@month NVARCHAR(50),
@costcenter NVARCHAR(500),
@GLaccount NVARCHAR(9)
AS
BEGIN
/* Remove existing content*/
DELETE FROM _Pink_TB_StandingsRegister
/* Add records part 1 */
INSERT INTO _Pink_TB_StandingsRegister
EXEC _Pink_SP_StandingsRegister @year, @month, @costcenter, @GLaccount
/* Add records part 2 */
INSERT INTO _Pink_TB_StandingsRegister
Type,
Row,
Year,
Month,
YearDatetable,
MonthDatetable
EXEC _Pink_SP_StandingsRegisterDatetable @year
/* Select all records */
SELECT *
FROM _Pink_TB_StandingsRegister
END
GO

Hi bijntjede2e,
After testing a similar scenario in my own environment, it works well in Reporting Services. In my test, the stored procedure returns all the fields from _Pink_TB_StandingsRegister table in the dataset. Then I select some values from year, month, costcenter
and Glaccount parameters, it inserts some values in the _Pink_TB_StandingsRegister table. So we can use this stored procedure as the dataset in the report.
In order to solve the problem more efficiently, I need to clarify some information.
Are you pass multiple values parameter to one stored procedure correctly? We can refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/dbdfa101-cccc-4e9f-aa50-566dc5ebcc27/ssrs-2008-r2-report-dataset-call-a-stored-procedure?forum=sqlrep
What results are you get when executing the stored procedure in SQL Server Management Studio? Is it works well? We should double those stored procedures.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report with stored procedures is unable to run in infoview.

Similar Messages

Maybe you are looking for