Reporting SharePoint Statistics using ControlPoint

I need to pull a report, or 2, that shows the total number of sites count and also the total number of unique accounts that have permissions in SharePoint 2010.
We have ControlPoint and I have run several reports but have not been able to find what I need. I want the report to give me a calculated number for how many active sites we have.
I want the same thing for how many accounts/users have access to the overall environment not specific sites. I need the report to show the users count but only once per user not per user
permission. What I mean be that is some users will have permission to multiple sites but I want the report to count them only one time.
Does anyone know if this is possible?
Thank you in advance for your assistance on this.
Doug

Looking at how powerful and complex the tool is, I'd suspect that it's very capable but I also think you're asking in potentially the wrong forum. The Metalogix support base and their customer support will be able to access this. I believe
their Academy also has some forums but you may need to sign up for this.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Similar Messages

SSRS reporting with sharepoint list using Distinct and Multivalue parameters

i want create ssrs report with sharepoint list using ms-vs(2008). i want create Distinct multivalue parameters by using CAML query. There is any way we put CAML query where we use Distinct keyword and IN clause in CAML query... i hope all experts will
understand my poor English... sorry for poor English.. plz help me

Hi AsifMehmood,
Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query, right?
For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
to get all the values from the fields which will add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
Step by Steps information in below thread for your reference to create the parameters and the custom code:
"How to get distinct values of sharepoint column using SSRS"
Other similar thread for your reference:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
If your problem still exists, please feel free to ask and also try to provide us more details information.
Regards
Vicky Liu

Report jobs statistics disappears from Enterprise Manager

Hi,
In Report server Enterprise manager, the report jobs statistics like failed jobs, current jobs, Finished jobs, configuration stats, Response and Load, General Stats, Component status, etc disappear. Only after restarting the report server they appear again. It is not possible for me to restart the production report server frequently. Is there any solution other than restarting.
Also when I click on Failed jobs, the page appears blank. I have to then stop the report server, rename the rep_server.dat file and then start the report server.
Please suggest a solution if anybody faced the problem in Windows envt.

You can add the "Failed Job Count" metrics to the Notification rule you are using. This will alert you if any job fails.
If that is not enough, you can create a User defined Metrics using the information you need and adding the UDM to the Notification rule

In alv report can i use control break events? if no .whay?

Hi all,
in alv report can i use control break events? if no .whay?

hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once.

Creating a new folder in a SharePoint library using C# Windows Application.

I have tried to create a folder within a SharePoint document library. The coding is as follows.
Text Box Name: txtNewFolderName
Button Name : btnCreateNewFolder
private void btnCreateNewFolder_Click(object sender, EventArgs e)
//String parameters for site URL and site name
const string siteUrl = "http://thekingsbury/";
const string siteName = "/SiteDirectory/thekingsbury/";
//Freeze UI
Cursor = Cursors.WaitCursor;
btnCreateNewFolder.Enabled = false;
//Use SPSite constructor to assign site collection based on top-level URL
SPSite siteCollection = new SPSite(siteUrl);
//Assign target site (SPWeb instance) based on site name
SPWeb site = siteCollection.AllWebs[siteName];
//Create an instance of SPDocumentLibrary based on the named doc library list
SPDocumentLibrary docLibrary = (SPDocumentLibrary)site.Lists["Test Library"];
//Create instance of SPFolderCollection and add a named folder based on forms input,
//then update library to reflect added folder
SPFolderCollection myFolders = site.Folders;
myFolders.Add("http://thekingsbury/Test%20Library/" + txtNewFolderName.Text + "/");
docLibrary.Update();
//UI clean-up
Cursor = Cursors.Default;
btnCreateNewFolder.Enabled = true;
Site URL :
http://thekingsbury/
Site Name: thekingsbury
Document Library : Test Library
My problem is when I click the button it gives an error as the following.
The Web application at http://thekingsbury/ could not be found.
Verify that you have typed the URL correctly.
If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
The error shows at the following statement.
"SPSite siteCollection = new SPSite(siteUrl);"
I created both Windows & Web solutions and the result was the same.
Note: I have add the reference to the SharePoint using the Microsoft.SharePoint.dll file. And used the "using Microsoft.SharePoint;" statement.
Please can someone help me on this matter.It's a real paint to me.

The complete solution using an InfoPath 2010 form is as the below.
using Microsoft.Office.InfoPath;
using System;
using System.Xml;
using System.Xml.XPath;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Client;
using Microsoft.SharePoint.Linq;
namespace Create_Folder_In_SharePoint_Library
public partial class FormCode
public void InternalStartup()
((ButtonEvent)EventManager.ControlEvents["btnCreateFolder"]).Clicked += new ClickedEventHandler(btnCreateFolder_Clicked);
public void btnCreateFolder_Clicked(object sender, ClickedEventArgs e)
SPSite mySite = new SPSite("Http://thekingsbury/");
SPWeb myWeb = mySite.OpenWeb();
//Code to retreive the new library.
XPathNavigator xLibraryName = MainDataSource.CreateNavigator();
String NewLibraryName = xLibraryName.SelectSingleNode("/my:myFields/my:LibraryName", NamespaceManager).Value;
//Code to retreive the library description.
XPathNavigator xLibraryDesc = MainDataSource.CreateNavigator();
String NewLibDesc = xLibraryDesc.SelectSingleNode("/my:myFields/my:LibraryDescription", NamespaceManager).Value;
//Code to retreive the new folder name.
XPathNavigator xFolderName = MainDataSource.CreateNavigator();
String NewFolderName = xFolderName.SelectSingleNode("/my:myFields/my:FolderName", NamespaceManager).Value;
//Creating the new library.
myWeb.Lists.Add(NewLibraryName, NewLibDesc, SPListTemplateType.DocumentLibrary);
myWeb.Update();
//Creating the new folder within the new library.
SPDocumentLibrary newDocLibrary = (SPDocumentLibrary)myWeb.Lists[NewLibraryName];
SPFolderCollection newFolders = myWeb.Folders;
newFolders.Add("http://thekingsbury/" + NewLibraryName + "/" + NewFolderName + "/");
newDocLibrary.Update();
I think everyone can use this.
When you are generating a folder always try to avoid reserved characters : ; # $ % ^ a and suchlike.

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

Is there any Open source Reporting Toll for using in swing application ?

Is there any reporting system like crystal report or any thing for report generation. Using JTable class it is so time taking job. I have downloaded Eclipse with crystal report embedded, and have created a report but can not integrate the report with JFrame with any menu item action. All the code i got releted to JSP. and few code get that are using
//Crystal Java Reporting Component (JRC) imports.
import com.crystaldecisions.reports.sdk.*;
import com.crystaldecisions.sdk.occa.report.lib.*;
//Java Imports.
import javax.swing.*;
public class JRCViewReport {
     private static final String REPORT_NAME = "JRCViewReport.rpt";
     public static void launchApplication() {
          try {
               //Open report.
               ReportClientDocument reportClientDoc = new ReportClientDocument();
               reportClientDoc.open(REPORT_NAME, 0);
               //Launch JFrame that contains the report viewer.
               new ReportViewerFrame(reportClientDoc);
          catch(ReportSDKException ex) {
               System.out.println(ex);
          catch(Exception ex) {
               System.out.println(ex);
     public static void main(String [] args) {
          //Event-dispatching thread to run Swing GUI. This is good practice for Swing applications
          //to help ensure that events are dispatched in a predicatable order.
          //For more information on using this method, refer to the SUN site below for more details:
          //http://java.sun.com/products/jfc/tsc/articles/threads/threads1.html
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    //Hand-off to worker function to start application.
                    launchApplication();
}Also there is one file ReportViewerFrame.java
but the error is "*com.crystaldecisions.reports.sdk*" not found
Please help ..........................................................

I have already use Jasper Report. Thakns a lot for your suggestion. Now I think i have solved your problem...... View the code.. this code will not open the JasperViewer but from the background it will be printed and after calling the printing function you can save a data in the database ------------------------
JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
        Connection con = Database.getConnection(); // your database connection
        jasperPrint = JasperFillManager.fillReport(jasperReport, parameters, con);
        for(int i=0;;i++) { //print all pages
            try{
                JRPrinterAWT.printPages(jasperPrint,i,i,false);
            }catch(Exception e) {
                break;
        }

How to get the Report Names which use a Folder in Discoverer Administrator?

Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)

Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you!

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

Report parameters when using DoCmd.OutputTo

OK,
Thank you one and all for answering my last question. I have another one. OK, I can set the report's parameters using the where clause part of the DoCmd.OpenReport. Great! But I also save that report as a text file using the following command
DoCmd.OutputTo acOutputReport, "rptSalesInvoiceEntryWineShip", acFormatTXT, strInvoicePath & Me.txtInvoiceNumber & ".txt", False
Unfortunately, there is no where clause part available!! OK, any ideas here. thanks!!
Ed Cohen
Edgar Cohen

The other way to do this, which avoids having to open the report in print preview, is to base the report on a query which references a control on a form (presumably the txtInvoiceNumber control in your case), as a parameter.
As it happens there is a demo file which does exactly this, using a simple invoicing database as the example, as InvoicePDF.zip, in my public databases folder at:
https://skydrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
You might have to copy and paste the text of the above (not copy the link location) into your browser; for some reason it sometimes doesn't seem to work as a hyperlink.
As its name suggests this creates a PDF file of the invoice, which is primarily what the demo is for, but it will work just the same if outputting to a text file.
Ken Sheridan, Stafford, England

Crystal report from JSP using the JRC

Hi, I am trying to call crystal report from JSP using the JRC.
But i am getting the Error as 'Logon Failed'. my web.xml entry is
<env-entry>
<env-entry-name>jdbc/Test</env-entry-name>
<env-entry-value>!oracle.jdbc.driver.OracleDriver!jdbc:oracle:thin:{userid}/{password}@//10.0.0.1:1521/TestDB</env-entry-value>
<env-entry-type>java.lang.String</env-entry-type>
</env-entry>
i am setting the userid and password in the code. Please see the below code for your reference. Please help me to solve the issue.
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSourceFactory2" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.JPEReportSource" %>
<html>
<head>
<title>Crystal Report with Database Logon information</title> </head>
<body bgcolor="#ffffff">
<%
try
String report = "/TEMPLATE.rpt";
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
JPEReportSource reportSource = (JPEReportSource) rptSrcFactory.createReportSource(report, request.getLocale());
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setHasRefreshButton(true);
IConnectionInfo newConnInfo = new ConnectionInfo();
newConnInfo.setUserName("TEST");
newConnInfo.setPassword("TEST");
ConnectionInfos newConnInfos = new ConnectionInfos();
newConnInfos.add(newConnInfo);
viewer.setDatabaseLogonInfos(newConnInfos);
viewer.setEnableLogonPrompt(false);
viewer.setOwnPage(true);
viewer.setOwnForm(true);
out.println("Connection Information: "+viewer.getDatabaseLogonInfos().getConnectionInfo(0).getAttributes().toString());
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),null);
viewer.dispose();
catch(Exception e)
throw new JspException( e);
%>
</body>
</html>

I never really had much luck with this approach.
Mind you I was using Crystal Reports 10, and as far as I recall it didn't allow setting/changing of database at this level.
Things to check
- can you create a database connection on your page with this URL/username/password?
- what server are you using? Tomcat? WebLogic?
I found this in your other post:
Connection Information: {Server Name=ee6rpt, Connection String=DSN=s(ee6rpt);User ID=s(ee62test);Password=;UseDSNProperties=b(false), Database Name=, Database DLL=crdb_odbc.dll}That would indicate it is using odbc to connect to the database (crdb_odbc.dll). ODBC is a bad idea with java.
The way I have got it to work for me (after much trial and error) was to in Crystal Reports to connect using the Oracle Driver, and specifying a tnsname - eg define REPORT_DS in tnsnames.ora.
When running through the JRC, it looked for a JNDI datasource under that same name "REPORT_DS".
Don't know if that will help you or not.
Good luck,
evnafets

How can I send an email from Sharepoint Online using sandbox solution?

How can I send an email from Sharepoint Online using sandbox solution?
If possible I do not want to use workflow.
Is It possible to do it without using workflow?

hello Steven Andrews,
when any user sends a message using contact us page in SharePoint online.
1. We are inserting item in Contact Us List . - This is working fine
for anonymous users also. We have used Office365 anonymous codeplex wsp and it is working fine. Anonymous user is able to insert new record in the Contact Us List.
2. Once, new record is inserted in Contact Us list, we want to fire email notifying thanks to the user on his email id as well as to our company x person for notification of new inquiry.
We tried using Workflow having impersonation step for anonymous user but it is not working for Anonymous users. Workflow is able to sent the email if someone logged into system but not working for Anonymous user although workflow is getting started
but not able to send email although used Imperonsation step.
We are stuck into implementing second step.

How to create a three state approval workflow in SharePoint 2013 using visual studio 2013

Hi Everyone,
i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more than two persons).
Once they will approve the request again it will come back to reviewer and he will assign the task to team member(parallel process). Once the team member accepted then workflow terminate.
i want develop this workflow using visual studio 2013 only, not using designer..
Thanks in Advance.....
Mallesh

Hello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

How do I query a SharePoint List using a url and filtering on date?

I am reading a SharePoint list using jquery. Everything is working fine
except for the filter. Each list item has an expiration date. I want to retrieve JUST the items that have not expired (Expires > Today) but I can't figure out the url syntax and I've been searching all day for an example and
can't find one. Could someone please help?!? See bold code below.
Thanks,
Glen
$(document).ready(function ()
<strong>var qryWCFUrl = "/sites/MMTP1/_vti_bin/listdata.svc/MMAlerts?$filter=(Expires gt '08/10/2011')&$orderby=Title";
</strong> $.getJSON(qryWCFUrl, function (results)
$.each(results.d.results, function (i, mmAlert)
itemID = mmAlert.Id;
mmTitle = mmAlert.Title;
mmClass = mmAlert.ClassValue;
//alert("Item="+itemID+" Title="+mmTitle+" Class="+mmClass);
AddMMStatus(mmAlert.Id,mmAlert.Title,mmAlert.ClassValue);

Fadi,
Thanks for your response. I actually have another version of the code that uses the SP client objects that works. The problem is site boundries. Let me give a more complete project explanation.
I am creating a master page for a new intranet. As part of this master page, I want to read from an SP list of alerts and post each alert (if not expired) in the SP status bar. I've gotten this to work with SP client objects and jquery (except
for the date filter part). Both of these solutions work fine on the top site level. BUT when trying it out at the sub-site level, the SP client objects version of my code fails. The jQuery version works except the date filtering.
I looked at the example from your link and it looks like a bit of a hybrid to my approaches: JQuery with CAML. My question is; does this example permit me to access a list in the top-level site from the subsites? Please excuse my ignorance,
but I am an EXTREME newbie in this having spent the past 8 years as a VB.Net developer and a little bit of ASP.Net.
Below are the two different versions of my code in different versions of my master page definition:
SP Client Object Version
<script type="text/javascript">
// <![CDATA[
ExecuteOrDelayUntilScriptLoaded(LoadAlerts, "sp.js");
var ctx;
var currAlerts;
function LoadAlerts() {
ctx = new SP.ClientContext.get_current();
list = ctx.get_web().get_lists('/sites/MMTP1/Lists/').getByTitle('MMAlerts');
var cmlQry = new SP.CamlQuery();
var camlExp = '<query><Query><Where><Gt><FieldRef Name="Expires" /><Value IncludeTimeValue="FALSE" Type="DateTime"><Today /></Value></Gt></Where></Query></query>';
cmlQry.set_viewXml(camlExp);
currAlerts = list.getItems(cmlQry);
ctx.load(currAlerts,'Include(ID,Title,Class)');
ctx.executeQueryAsync(GetAlertsSuccess,GetAlertsFailed);
function GetAlertsSuccess() {
var lstEnum = currAlerts.getEnumerator();
while(lstEnum.moveNext()) {
var mmAlert = lstEnum.get_current();
AddMMStatus(mmAlert.get_item('ID'),mmAlert.get_item('Title'),mmAlert.get_item('Class'));
function GetAlertsFailed(sender,args) {
alert('Alerts load failed: ' + args.tostring);
function AddMMStatus(msgID, strTitle, strClass) {
var statID;
var statClass;
var statTitle;
statClass = "<a href=\"#\" onclick=\"javascript:DisplayAlert("+msgID+");\">" + strClass + ": </a>";
statTitle = "<a href=\"#\" onclick=\"javascript:DisplayAlert("+msgID+");\">" + strTitle + "</a>";
statID = SP.UI.Status.addStatus(statClass, statTitle, true);
SP.UI.Status.setStatusPriColor(statID,"red");
function DisplayAlert(msgID) {
var options = {
title: "Miller & Martin Alert!",
url: "/sites/MMTP1/SitePages/ShowAlert02.aspx?ID="+msgID,
allowMaximize: false,
showClose: true
SP.UI.ModalDialog.showModalDialog(options);
// ]]>
</script>
JQuery Version (works except for filtering by date)
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script>
<script type="text/javascript" >
// <![CDATA[
var itemID;
var mmTitle;
var mmClass;
$(document).ready(function ()
var qryWCFUrl = "/sites/MMTP1/_vti_bin/listdata.svc/MMAlerts?$filter=(Expires gt '08/10/2011')&$orderby=Title";
$.getJSON(qryWCFUrl, function (results)
$.each(results.d.results, function (i, mmAlert)
itemID = mmAlert.Id;
mmTitle = mmAlert.Title;
mmClass = mmAlert.ClassValue;
AddMMStatus(mmAlert.Id,mmAlert.Title,mmAlert.ClassValue);
function AddMMStatus(msgID, strTitle, strClass, strSeverity) {
var statID;
var statClass;
var statTitle;
statClass = "<div id=\"mmAlertTitle\" style=\"display:inline-block;\"><a href=\"#\" onclick=\"javascript:DisplayAlert("+msgID+");\">" + strClass + ": </a></div>";
statTitle = "<div id=\"mmAlertDetail\" style=\"display:inline-block;\"><a href=\"#\" onclick=\"javascript:DisplayAlert("+msgID+");\">" + strTitle + "</a></div>";
statID = SP.UI.Status.addStatus(statClass, statTitle, true);
SP.UI.Status.setStatusPriColor(statID,"green");
function DisplayAlert(msgID) {
var options = {
title: "Miller & Martin Alert!",
url: "/sites/MMTP1/SitePages/ShowAlert02.aspx?ID="+msgID,
allowMaximize: false,
showClose: true
SP.UI.ModalDialog.showModalDialog(options);
// ]]>
</script>

Reporting SharePoint Statistics using ControlPoint

Similar Messages

Maybe you are looking for