Reporting Trouble and shooting it?

I don't clearly see a why to report trouble, troubleshooting steps taken and results -- so I'm doing that here:
First off I see:
1318164369114 Engine.Tabs WARN Error decrypting record: Record SHA256 HMAC mismatch: should be 4100668facc996ea02e6d65c072b18db65960efc36e3e5735b12c5ed4a7c2bcd, is 3cc4bb5f6739fd1f59ea51d179414a60414828ece6b1c3b57464236fac473a73 No traceback available
Next I see:
phx-sync061.services.mozilla.com : server does not support RFC 5746, see CVE-2009-3555
Then it is all downhill from there :P
1318164563811 Collection WARN Got exception calling onProgress handler during fetch of https://phx-sync061.services.mozilla.com/1.0/sneex/storage/history?full=1&ids=---YwqR33iIQ,-0LiKr71ZAzG,-2sx6tqs768t,-5bJBwhWIjBw,-71KjXJFOAww,-7xeN1D5FTCV,-8duoQMYGLBn,-8heoZflti2a,-8sFCUeedWhT,-8wUrtnYy9i5,-9rvsxT0G4-W,-AhA9bPK082o,-BZfi0SIIy3F,-C8FCUZimqd4,-CZcMoFuAcri,-Cb9XesBBq0m,-CbSYlvuBBrv,-DLscGuDgMIS,-FU
(... a crap load of JS/JSON errors... Over 143 Thousand characters of it.)
(There here I get: Oops - Please keep the length of your content to 10,000 characters or less. It is currently 143,701 characters.) For that I would say please keep the error console output to <10,000 characters also -- but I don't think you can... Don't misunderstand me -- I LOVE Firefox but, um, wtf ya know?
Anyways -- any ideas of WHO to give this all too and FIX it? ><
Thx/Sx

Satellite A500D-111 (PSAS9E-002005N5) <- Norwegian version
See the section Restoring the pre-installed software from your created Recovery Discs, on p. 3-13 of the User's Manual (attached).
i just get a black screen with the pc-mouse on the screen. Is it the harddrive that is broken and needed to be changed or is it something else that cause this problem?
Could be you have a drive with advanced-format technology. See if you can introduce a new driver during the restore process.
See this message (and others in that thread).
After Restoring to New Hard Disk, No Windows Update - a Fix
-Jerry
Attachments:
A500UsersManual.pdf ‏6718 KB

Similar Messages

Having trouble deciding on a point and shoot camera.

I have been searching for a point and shoot camera and I have narrowed it down to two cameras. The cameras that I'm looking at are the Cannon Powershot SX510 HS 12.1mp with a 30x optical zoom and the other one is the Fujifilm FinePix S8200 16.2mp with a 40x optical zoom. They are both on sale for the same price. Which one should I get??

I have found with the power zooms that once you get above 14x optical you really start to lose quality. In large part because the more you zoom the more of an issue camera shake comes into play.
Keep in mind these are little bitty lenses trying to do the job of a higher quality piece of glass in a SLR lens.
The actual distance between the front and back of the P&S lens is shorter than on SLR Lens (typically)
Think of it this way. Take a 12" ruler. Put it on wegde at the 1/2" mark. every little movement of the short end of the stick makes a more dramatic movement on the other end.
With a 30x optical zoom or more you really are going to accentuat that a lot more. So a 1mm movment at the base of the camera will result in a larger movement at the other end. At that level you will need to have a tripod to get as clear of an image as possible.
Go into a store that has the high optical zoom cameras. Find something that is very far away and zoom in on it as far as you can. Try to hold that camera still enought that the image does not move.
Also, the more you zoom the higer your f/Stop is going to be. Which means less light, which means a longer shutter release which equates to a more shaky photo.
If you really want power zoom I would strongly suggest investing in a Canon, Nikon, or Sony DSLR

Please help about Report Printer and PS tables-objects . ..

Hi everybody
I'm in trouble. I have a requirement in PS módule related with reports created by the Report Printer tool. I don't have any idea about these topics.
My requirement is to create a report (not with Report Printer) with the structure for projects, with all the structure Project-WBS-Network-Activity and with some values like Budget, Commit, Actual, Paid, etc.
The functional consultant only tells me about some reports created with Report Printer wich have the columns required, some report has the Budget, other one has the Commit, etc. For example, one report is the tcode S_ALR_87013532; i don't know if this transaction exists in all the SAP implementations or if it was created only for my company.
These reports only show two levels (Project-Network) so i i have to investigate:
1. How to get all the structure levels (project-WBS-network-activity)
2. How to 'translate' in code some value showed in a report created with Report Printer, i guess these values are created with formules and objects.
3. How to get the same values showed in these reports, but for the Networks and Activities.
I do not know anything about PS module and Report Printer and i really don't have any idea about how to make my development.
4. I think the functional consultant could be able to create the report himself with the Report Printer, but he tells me he does not manage this tool so good and he wants to send SAP mails with the reports, and he say the reports created with Report Printer can not send mails. Is this true ? and then, would be easier for me to learn Report Printer and create the report myself instead to develop it ?
Does somebody can help me ? Any idea ?
Please help !! I don't know even how to start with this.
Thanks in advance ..
Frank

Hi Frank,
here're some links:
-http://help.sap.com/saphelp_47x200/helpdata/en/ca/01993862b47c67e10000009b38f8cf/frameset.htm
-http://www.sapgenie.com/abap/tables_ps.htm
-Re: Project System Costs: budget/actual/commt/rem.plan/assd
Andreas

Report Writer and Report painter documents

Hi
If anyone have any documents regarding the report painter and writer, could you please send it to [email protected]?
Documents with step by step creation of custom report from scratch...? or anything related to these...except the help.sap.com site links..
Anyhelp is greatly appreciated...
thank you
thilothama

Hi all,
I am having this report s_alr_87013549 - here I can select by Projects and get the cost elements. I want to use this report as a base for my custom report, which should give me the same result as the above report with Project, WBS, Network activities for each line level..My questions are,
1. Do I have to define my own library? with columns I need or use the library that the S_ALR report is in??
2. I am having trouble in understanding characterics, key figure cocncepts - also info structures - to define a report with rows and columns like this - what shld i do>??
Project name|WBSElement|Network Activity|NetworkActivityElement|CostElemt|PartnerObject|actualCOSt|PlanCost
These columns should be there in my report...
Finally - can i have more than 4 columns in my report??
Please provide Expert advice....I will be really thankful...

Point and Shoot for Yearbook Staff Photographer

I'm currently looking for a point and shoot camera for the upcoming school year to take pictures at campus events for my college's yearbook.
The last point and shoot I had was a Canon PowerShot A1000IS. Since then, I've dabbled in manual 35mm photography and would like a digital camera with more settings and a longer zoom. My budget is less than $250; I'm looking for a camera with at least a 15X zoom (though more wouldn't hurt), a viewfinder, and decent low-light picture quality.
Nothing too fancy; I just want something that isn't too expensive or bulky that will produce decent pictures until I can upgrade to my first DSLR.

What do you think about this?
http://www.bestbuy.com/site/Canon+-+PowerShot+SX150+IS+Black+14.1-Megapixel+Digital+Camera+-+Black/3...
It's the next step up from the sub $100 Canon's. I really like it as it uses AA's. Which I substitute with Eneloop rechargeables. Image quality is not DSLR.
Do some research, on this model. There's some report of power issues.
After that.... start budgetting for this...
http://www.bestbuy.com/site/Nikon+-+D3200+24.2-Megapixel+Digital+SLR+Camera+with+18-55mm+Zoom+Lens+-...

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

CR XI R2: Crystal Reports freezes and crashes when I try to open a report

I added this question as a Reply to a message by nic2deep a month ago <Crystal Reports freezes every time I try to open a report.>, but got no response so I thought I'd try again on my own.
I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested to nic2deep:
1) Open Contol Panel and add/remove programs and select CR. Do a repair install and if possible use the Custom Options and install all DB drivers and Export options, except Lotus Notes, unless you' re using them.
Results: Tried many times with no effect.
2) It may be that your firewall setting or anti-virus software is blocking access to system files or resources. When you do the repair install make sure to disable them and un-plug yourself from the network so you protect your PC while they are off line.
Results: Firewall was always OFF because network security handles all that. Can't turn off anti-VIrus, but both computers have the same antivirus system anyway.
3) Look in the System and Application Event logs in Admin tools; it may give you a clue what your PC is trying to get to and being denied.
Results: The only thing that is logged in Admin Tools when this happens is a "Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this? Something in the Registry?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Hi Debi,
Because in CR XI R2 it is WYSIWYG meaning we use both the display and the printer drivers to render the report. Same as what PDF does. If we can't find the printer the report was designed against, and all the placements of each object is dependent on the printer when designed, we have to default to your default printer to be able to calculate internally when to render the report objects and format the layout thus the message from CR indicating so.
Basically CR dynamically builds the page layout dependent on the local system. Also the reason why CR requires a default printer to be installed, if it's not then we use Microsoft's Generic Print driver. It's not that reliable either but we have to use something.
And another "for your info" is the same for our database drivers. Example, if you create a report off of MS SQL Server and then you want to view the SQL CR generates you need to log on first. This way CR can query the DB client and generate the SQL according to the DB. If you just want to see the SQL you could just set location to Access, problem with this is because CR dynamically generates the SQL according to the DB you set lcoation to we may change the SQL Statement and not actually show you what the report uses when connecting to the real database.
One of the side effects of supporting so many DB's and Printers and Video drivers. Sometimes drivers do non-standard functionality which CR did not anticipate or code on how to handle.....
This all changed in CR 2008, we are not as dependent on the printer driver but this created a whole new set of problems if you hadn't noticed from all the Printer problems posted.... But we are going back to the CR XI R2 printer functionality model to resolve all of the issues....
Thanks again
Don

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Report, Form, and Data Component portlets go to error page

I am able to add Report Form and Data Component portlets to my page, but when I click on the define button it takes me to my error page.
Have I missed configuring something?

hello friends,
thanks for replly,
i m using command noe after table node in main window, but i want display the data below the main window , it is diplaying new page as required but only missing data below the main window.
to be more clear i want to print all the window in first page then only go for next page , so is there any condition or parmeter in main window to go next page only agfter completion of first page.
dont worry abt points.

Creating a print button to call a Report Query and pass filters

If i use the REPORT QUERY option in APEX 4 to create an statement that is the same one used in an interactive report, can I create a link or button to the REPORT QUERY and pass all the session and filter information from the interactive report to the report query?
This way I can have the interactive report screen where the user can do all sorts of modifications and such and then pass those to the REPORT QUERY so I can call that from a custom link or button.
You may ask "why does he need another print button?"
Answer: I am using a view that has some embedded HTML tags to format the output really nicely. The HTML download version created by the interactive reports works beautifully. The customer also wants a PDF version (meh) which does not render the HTML tags and actually echos them as part of the text. I found that I can create another view that uses the CHR function to create all the breaks and such I was doing with HTML and these do render properly in PDF. So, I figured just have 2 reports: 1 Interactive and 1 using a REPORT QUERY. I just want to call the REPORT QUERY version but use the Interactive Search form to set all the parameters.
Or, am I over thinking this and there is an easier method?
I made a previous post where I showed how I got the APEX printing to work and i hoped that helped someone out - fixing this issue would put the whole thing to rest.
Thanks

Is BI Publisher desktop (MS Word add-in) a possibility? This would allow you to use MS Word to create your output template (RTF) that would result in a properly formatted PDF. Of course, you'd have to right an updated version of the query without HTML embedded. Just thinking outside of the box.

Report 6i and Report 10g together in a system

Hi,
Is it create any problem if I installed both Report 6i and Report 10g in
a system having 10g database.
What are possible problem that will have to face?

Hi,
There won't be any issues. We are using both in our development machines. You must make sure the tnsnames.ora has correct entries.
Regards,
Manu.

Reporting tools and SAP BW

Dear Sirs,
We have Business Objects BI 4.0 and SAP BW 7.3.
Actually we are using Web Intelligence and BEx Query to reporting.
We have not Business Layer (Universe) between BW and BO because BO it's not supported to create universe (unx) on BW. So we create document in WEBI using BEx Query.
We want to use Xcelsius (Dashboard Design) 2011 and I was thinking that we can use query from universe to connect with BW (new functionality in version 2011). Can we? Or maybe we should to connect to BW using "Connecttion to SAP BW"?
We want to use Explorer (on iPad and iPhone), but Explorer requires universe (unx).
Is not possible to create universe (unx, because unv is not supported via Explorer) based on SAP BW, is it true?
We should we do, when we want to use Explorer with SAP BW?
Do I understand connection between reporting tools and SAP BW:
Crystal Reports - can I use cubes or BEx queries
Xcelsius - using "Connection to SAP BW"
WEBI - BExqueries or universe (but only UNV - old version).
Explorer - in my opinion is not possible
Analysis for OLAP - drirect to cube in SAP BW
Could you please comment.

Hi
With the current version of the BI 4.0 SP2 BI Platform, one cannot create a universe (.UNX format) against BW using the OLAP connection. However you can create a universe (.UNX format) using the Relational connection (see OSS note: 1656905 - How to create UNX universe based on Business Warehourse InfoCubes). One limitation is the use of hierarchies with the relational connection.
Then you can create the Information spaces based on the universe (.UNX format) that the Explorer can use.
BO Reporting tools:
1. Crystal Reports for Enterprise = you can use the OLAP connection (BICS) directly against the BW InfoCubes or Queries, if queries already exist in the BW system then you can leverage these directly (less time spent recreating the entire query in Crystal)
2. Xcelsius = you can use the BICS or Web Service or Universe to access the data
3. Web Intelligence = you can use the OLAP Connection (BICS)
4. Explorer = you can use a universe (.UNX format) via a Relational Connection
5. Analysis for OLAP = you can use the OLAP connection (BICS) to either a query or InfoCube.
It is hoped that in Feature Pack 3 which will be released later this year, that missing functionalities will be delivered for BI 4.0.
Regards
Derek

Advantage and disadvantage of xml publisher, report builder and discoverer

Hi,
anyone can explain advantage and disadvantage of xml publisher, report builder and discoverer?
thanks in advance!

The best way i found was to put a equals and then double quotes... this only works for excel however it will allow you to cut and paste (ie to use the value to search in Oracle) and also to do vlookups.
In a bit more detail:
- I used word to generate my default table
- this created a field INVOICE_NUM
- in the cell in the table i put = " before the INVOICE_NUM field and then put the closing " afterwards.
The theory is that excel will concatenate the values together... because it has quotes around it, it will treat it as a string rather than simply a value.
For any other formats this will not work.
I'm guessing most people have moved on and resolved this some other way, but just thought I'd share the wealth!

Reporting Trouble and shooting it?

Similar Messages

Maybe you are looking for