RePost: can't save the changes made on console
Hi,
I am in wls7.0sp1, whenever I change the values and click "Apply" button, the
changes are reflected on the console, that means the values of that field changed,
and also I can see the "<Configuration changes for domain saved to the repository.>"
in the admin log file, but the changes not made to config.xml, the timestamp of
config.xml also stays same as the time when I started admin server. I restarted
one managed server, the new value still stays. How can I figure out what's going
on here? How admin server communicate with managed server with multiple NIC? Thanks
I tested servral dofferent values, I cahnged the "Low Memory GCThreshold" to 8
but is not in config.xml, and I specified the InterfaceAddress, but is't not in
there either.
Thanks
"Charles Paclat" <[email protected]> wrote:
>
Hi Joe,
Can you provide a little more information as to what it is that you are
actually
trying to modify in the console.
Charles
"Joe" <[email protected]> wrote:
Hi,
I am in wls7.0sp1, whenever I change the values and click "Apply" button,
the
changes are reflected on the console, that means the values of thatfield
changed,
and also I can see the "<Configuration changes for domain saved to the
repository.>"
in the admin log file, but the changes not made to config.xml, the timestamp
of
config.xml also stays same as the time when I started admin server.I
restarted
one managed server, the new value still stays. How can I figure outwhat's
going
on here? How admin server communicate with managed server with multiple
NIC? Thanks
Similar Messages
-
I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.
If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again. -
I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents -
Through which T code can I find the changes made to outbound delivery
Through which T code can I find the changes made to outbound delivery
RegardsGo to VL03N > Environment > Changes .Here write down the Item Number and you have the option to see the Detail View & Overview.
Best Regards,
Ankur
Edited by: Ankur Agrawal on Sep 30, 2009 12:36 PM -
I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them
I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "+ " sign in front of them
-
Error while updating the Human task in JDeveloper. Can not save the changes
When I try to update my Human task the following error is occuring in JDeveloper and I can't save my changes, any help will be appreciable. thank you.
Uncaught exception
java.lang.NullPointerException
o.bpel.services.workflow.verification.impl.TaskContentAccess.getAccess(TaskContentAccess.java:127)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getDefaultActionAccessData(AccessRulesUtil.java:265)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getChangedActionAccessData(AccessRulesUtil.java:174)
o.tip.tools.ide.workflow.editor.tab.TaskActionAccessConfigurationPanel.getData(TaskActionAccessConfigurationPanel.java:272)
o.tip.tools.ide.workflow.editor.tab.TaskAccessConfigurationPanel.getActionData(TaskAccessConfigurationPanel.java:103)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsPanel.getData(AdvancedOptionsPanel.java:215)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsEditor$LocalPropertyChangeListener.propertyChange(AdvancedOptionsEditor.java:141)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.tab.AssigneesEditor.propertyChange(AssigneesEditor.java:186)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.StageEditor.firePropertyChange(StageEditor.java:1488)
o.tip.tools.ide.workflow.editor.v2.StageEditor.propertyChange(StageEditor.java:1081)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor.editParticipant(ParticipantEditor.java:1304)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor$LocalMouseAdapter.mouseClicked(ParticipantEditor.java:1004)
j.a.Component.processMouseEvent(Component.java:6266)
jx.s.JComponent.processMouseEvent(JComponent.java:3267)
j.a.Component.processEvent(Component.java:6028)
j.a.Container.processEvent(Container.java:2041)
j.a.Component.dispatchEventImpl(Component.java:4630)
j.a.Container.dispatchEventImpl(Container.java:2099)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4247)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4168)
j.a.Container.dispatchEventImpl(Container.java:2085)
j.a.Window.dispatchEventImpl(Window.java:2478)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.EventQueue.dispatchEvent(EventQueue.java:599)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)Resolved ..
It was an issue with permissions .
Thanks -
Can't save any changes made in EDIt mode?
HI all
I am new to apple products ... but I am now playing with iPhoto 11. I am able to import my photos from my camera with no problems. And then, in EDIT mode, under "adjust" I am able to make a lot of nice changes - De-noise, sharpness, etc.. - but I don't have a button to allow me to save? I have looked at the user guides on line and they talk of a DONE button - but I don't have one? And when I go back to the photo library and look at the photos there, the changes I have made are not shown. But if I click on each photo individualy and click on EDIT again - the changes I made are saved? But I can only see my changes whilst in the EDIT mode per photo?
How do I save my edits back to the photo library? I want to uploaded the photos with the changes I made - but everytime I try an upload -- even a single photo - I get the original photo before my edits
Any help would be appreciated please
Thanks
ChrisYour database is a bit mucked up (<- Technical term, that)
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Form is asking for do you want to save the changes made in the query mode
hi all,
according to my previous thread {thread:updating the nondatabase column}
i have set the lockrecord to yes for the non_db_field but when i query the form with help of f8 and try to close it with out any changes then too its asking for the commit.
how can i solve this issue.
Thanks..
Edited by: user13329002 on Dec 30, 2010 12:41 AMHello
Yes, i do agree with Ahmed
pls check the POST-QUERY TRIGGER < ---- This is the KEY-Problem
Trace which item causes the problem almost it's a db item was formaly returned from LOV and it is re-assigned in the POST-QUERY Trigger .
SO , changes in the db occured changes the status of the form.
most propaply it's a retrieved fk in ur post Query,also avoid using reserved words in ur display items as
TYPE ,NAME ,etc.
ITEM_ID ,ITEM_NAME -- reserved word for java and related staff ...pls check list of oracle reserved words
hope this helps solving ur problem...
Regards,
Abdetu... -
Tracking the changes made to the custom table field value
Hi all,
can we track the changes made to the custom table field values. if yes..plz specify how it can be done.
Example: if i changed the value of field 'NAME' of table 'YYHCUSTOMER'. i would like to know the old value and the new value of the field. For this, I set the flag 'LOG DATA CHANGES' in the technical settings of the table 'YYHCUSTOMER'.-> try TA: SCU3
regards Andreas -
How to see the changes made in tx code MN05
Hi all,
Do you know how can I see the changes made in tx code MN05?
I need to know when was The output condition updated? Do you have a change record on this change?
Thanks and regardsHi,
There is a Transaction code SCU3 to display the change logs
Goto the Transaction code and enter the Table for MN05 and execute, it will display all the logs for MN05.
If you didnt find any change logs here, then you have to activate the Change logs for this table.
To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
Check whether it was activated or not, if not activate it.
Thanks,
santosh -
My iPhoto's don't save the changes to them when i down load to the pro
I have taken photo's on the iphone 5s and thn adjusted them on the phone. When i down load into iphoto's they revert back to the oringinal. What am i doing wrong.
I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "+ " sign in front of them
-
Suppress the message do you want to save the changes you have made
hi all
i have written a rollback
it clears my record
but gives me the message
do you want to save the changes you have made
i have written
:system.message_level :=25;
rollback;
:system.message_level=0;
but still it is giveing me the message
can you please tell me how to suppress this message
please help me
thanks
mandartry in reverse
-
I have gone into my Tools and then Options and have made changes there (like for Downloads I clicked "Close when all downloads are finished"), but the changes will not save for when I close and reopen the browser; my changes to the settings are not being saved at all. How can I get the changes to stay? Also, I keep getting this popup from Firefox asking, "Will you help improve Mozilla Firefox by sending information about performance, hardware, usage, and customizations to Mozilla?" and I keep pressing the "No" button but it appears every time I open the browser. Even when I press "Yes," it reappears. Is there a way to permanently say "NO"? I would appreciate any help!
hello vnsonwu, this sounds like there might be a problem with the file in your profile folder that stores the settings (maybe it is set to read-only or corrupted in another form) - please go through the troubleshooting steps described here: [[How to fix preferences that won't save]]
-
How to avoid the message "Do you want to save the changes you have made?"
i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A -
Forms6i question - Do you want to save the changes you have made !!
Hi,
I'm developing a custom master-detail form for 11i e-Business Suite. The requirement is to programmatically default values for some of the base table items when entering the master record.. Both the master and the detail blocks are base table blocks and defined the relation between these 2 as well..
So i have coded my defaulting logic in the "when-new-record-instance " trigger only when the "(:system.record_status IN ('NEW','INSERT' ) AND :system.mode <> 'ENTER-QUERY')"..
This is working but the problem is even when i do not change any values in the master block and i try to exit out of the form, getting a message "Do you want to save the changes you have made ".. I want to get that message only when some thing else is changed/entered in the master block or when any new detail records has been entered for that master block.
Thanks in advance
ShreeShree,
It sounds like you have a Post-Query (PQ) trigger that is populating items in your Form. This is the typical reason why you would see this message when you close your form and no User changes have been made. The best solution would be to move your non-base table items from your data blocks to a control block so the PQ trigger won't mark the block or record as "Changed".
Hope this helps.
Craig...
Maybe you are looking for
-
Repeatedly: mpd/ncmpcpp pauses for about a second or two, then plays
Hello, I'm having trouble with mpd. About every thirty seconds it will pauses for a second them resume playing from where it paused. It's annoying and makes music unenjoyable. Does anyone have any idea what could be wrong? I appreciate any help. P
-
Automatic Purchase Requisition Creation in MRP run
Hi, 1. I create a Sales Order for quantity 20 of main material MAT which has two sub-components - COMP1 and COMP2. The plant in which this sales order is being created does not have any stock quantitiy of the material or its sub-components. For quant
-
Best practice tunning parameters for tunning ADF apps?
Hi all, I am tuning our 11g ADF app for around 3 billions (can be up to 10 billions records) and the concurrent connections up to 100. The app is running on a 16 core Intel chip and 8GB of RAM. The Weblogic used Rockit JDK. Any one have this experien
-
I keep receiving an error message when I try to send an adobe document through Outlook email.
I keep receiving an error message when I try to send an adobe document through Outlook email. The message is : Either there is not default mail client or the current mail client cannot fulfill the message request. Please run Microsoft Outlook and set
-
Updating to IOS 5.0.1 deleted all my contacts and calender - twice! - help
So Sunday evening my iphone was connected to my home wi-fi and a message popped up asking if i wanted to update to iOS 5.0.1 So i clicked and it installed and everything was fine. I woke up on monday morning and every single one of my 70+ contacts ha