Repricing the SAP contract generated from follow up doc in copy control

Hi,
I am facing issue with the conditions copy at item categories level at the time of follow up document in copy control.
The challenge is like this:
There is an option for the conditions copy for line item level upon which the corresponding pricing is generated.
D -- Copy all Conditions
C -- Copy manual conditions
The issue here is at config level they will maintain only Copy manual conditions depending upon whether it is a follow-up / Copy it should change the behavior as Copy all Conditions.
I tried to do this with crmv_event(After with reference::50) though but the problem is its triggering after the pricing got generated.
Welcome you ideas to resolve the issue.
Thanks & Regards,
Madhu J

Hello Ravikanth
With status management it's not possible to prevent the creation of follow-up documents in CRM.
You have to use the badi CRM_COPY_BADI. Here the exception DO_NOT_COPY must be raised. But it's not possible to gray out the path of the follow-up transactions e.g. for 'varian quote'.
I hope this could be helpful.
Best regards,
Maggie

Similar Messages

Problem in using the Web Service generated from BAPI_FLIGHT_GETLIST

Hi all,
I am trying to use the Web Service generated from BAPI_FLIGHT_GETLIST. I have got the wsdl file, and trying to invoke it. But, while I can test the BAPI using the Airline ID AA, I can't test from the Web Service using the same data. It shows the error message - "Airline AA not found". Anyone having solution, please help. This is urgent.
Thanks,
Anirban
Message was edited by:
Anirban Das

Yes, I am connecting to the same system where we have data..
Anirban

How to use the column names generated from Dynamic SQL

Hi,
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
Please find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
OPEN insert_csr FOR CASE
WHEN v_where IS NOT NULL
THEN 'SELECT '
|| v_select
|| ' FROM '
|| v_table
|| v_where
|| ';'
ELSE 'SELECT ' || v_select || ' FROM ' || v_table || ';'
END;
LOOP
v_ins_query :=
'INSERT INTO '
|| v_ins_tab
|| '('
|| v_insert
|| ') VALUES ('
|| How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
Please help me out with the above problem.
Edited by: kumar0828 on Feb 7, 2013 10:40 PM
Edited by: kumar0828 on Feb 7, 2013 10:42 PM

>
I Built the statement as required but i need the column list because the first column value of each row should be inserted into one more table.
So i was asking how to fetch the column list in a ref cursor so that value can be inserted in one more table.
>
Then add a RETURNING INTO clause to the query to have Oracle return the first column values into a collection.
See the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/returninginto_clause.htm#sthref2307

Call a smartform in the SAP R/3 from portal

Hi Friends
My requirement is to call a smartform in SAP R/3 from a portal application. Please guide on how to connect to SAP R/3 and print the smartform from portal.
Regards,
Saran

Hi,
You can create a SAP-Tocde iview in portal for the T-Code SAMARTFORMS....
Read this blog on how to Connect to R3 thru Portal...
Configuring EP for connecting to SAP R/3
Regards,
Srinivas

How to modify the SQL being generated from BC, to fix the issue

Hi,
We have seen a strange issue in our implementation.The issue is also reproducible in Vanilla environment.
In Contact List Applet, if we Query in First Name or Last Name fields in UI, the Query being generated is,showing that, Siebel is Querying for first name in S_POSTN_CON.CON_FST_NAME. This is a normalized column for S_CONTACT.FST_NAME.
This is causing the performance issue.
When I check the configuration in Tools for Contact BC's First Name field, it is configured as follows.
Join = S_CONTACT
Column = FST_NAME.
I do not understand, Why it is still querying in S_POSTN_CON.
Any suggestions on how to fix this issue to make the Query to be performed on S_CONTACT.FST_NAME?
Regards
Vamshi

Hi Vamshi,
As Robert mentioned, there just happens to be a number of things that need to be analyzed prior to changing the shape of the buscomp that triggers that sql.
If this siebel performance issue occurs on a production environment, you should certainly look at the performance trend/characteristics of that sql over time and assess its the impact on your business community (...), then carefully identify its -true- root-cause, implement a fix and validate it against a production-like environment in order to verify there is no regression associated with it; once the fix is deployed on your production system, you want to monitor its benefit overtime and on a 24x7 basis…all this may sound very generic yet good practices.
If you are looking at -effectively- solving this siebel peformance issue (and others...) in a timely manner, best is to have your Siebel Teams 1)use a Siebel-specific performance monitoring software technology built by Siebel Architects (like GMT v1.8.5, more info @ www.germainsoftware.com) that is able to collect 24x7 all the data needed for root-cause analysis(and more..), and 2)have senior siebel architects (like Robert's team) that have successfully solved tones and severe performance and scalability issues for many years, provide technical guidance to your team throughout the resolution process.
Siebel CRM is a great CRM software solution that is very complex. Every "switch you turn on/off", every customization you built into it may generate performance issues if it is not carefully implemented, optimized, tested...and monitored 24x7 once it is deployed onto your production system.
Good luck w/ this..
Regards,
Yannick Germain
CEO & Founder
GERMAIN SOFTWARE llc
Complete Siebel Performance Monitoring Tool
21 Columbus Avenue, Suite 221
San Francisco, CA 94111, USA
Cell: +1-415-606-3420
Fax: +1-415-651-9683
[email protected]
http://www.germainsoftware.com

Elements don't open the TIFF which generated from Aperture

Hello
I use Mac OS X 10.6.8 with Aperture 3.2.2 and Elemets 10 on a MBP 17" 2,8 GHz Intel Core 2 Duo.
When I use in Aperture a RAW to edit it in Elements there is no pictute in Elements.
The TIFF in Aperture is generated from the RAW and Elements start but there is no picture in Elements.
When I use an other external Application, for example Preview this works.
When I use Drag&Drop from Aperture to icon of Elements in dock this works.
Normal way - with Photoshop CS 3 - on an other Mac with same application works well.
What can be the reason that Aperture and Elements don't work on my MBP ?
Regards
Jochen

So a year later and now you have me.
Using PS Elements 10 with Aperture and photos do not Reflect back.
I open Aperture and ask to edit with PS elements 10 (set up as described here)
make my edits. when ready to save, i hit "Save"
The default “save” is IMAGENUMBER .tif BUT at the bottom “Format” it says .tiff ?????
I hit save and it does not reflect back in Aperture. However if i change the IMAGENUMBER.tif to IMAGENUMBER.tiff it does reflect back.
Again I point out if I save it as the default it does not work. (meaning I don’t know where the saved version goes? It does not reflect back in Aperture, It ONLY works if I change it to .tiff or jpeg.
Thank you, Orly

How to know the spool requests generated from my program?

hi
I want to get the spool request(s) that are generated from my report that's run either in foreground or background? how to know this? i know that we can go to sm37 and see, but is there any table or fm which stores this data? if i give my program name that's run on a particular date, i should get the spool request numbers. tsp01 only has the spool no. and not the program name..pl suggest...thanks all
Sathish. R

Hi ,
The system field sy-spono contains the spool numbers .
If you have such requirement, you can create one custom table with fields :
spool no, program , date , time
whenever you run ur program update this table ,
with system fields . spono , sy-repid , sy-datum and sy-uzeit .
Thaks .

In PC I have changed the default app location from default to other and copied the previous content to new location and changed the Default location in preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick

How can get the SAP MDM downloaded from SAP Marketplace?

Hi Experts,
I have tried to download the MDM from the below link -
http://service.sap.com/swdc
> SAP Software Distribution Center
> Download
> Installations and Upgrades
> Entry by Application Group
> SAP NetWeaver > SAP MDM > SAP NetWeaver MDM 7.1
But it is not showing there, can anyone please help me to find out so that I can start working on it.
another thing , I am basically from SAP PI technology, if you can tell me if it is possible for me to work with MDM and also please provide me some basic starter documents.
Thanks to all of you
Sugata Bagchi

Hi Sugata,
Please find the below links for your informationa and downloading of SAP-MDM 7.1
https://websmp109.sap-ag.de/~sapidb/011000358700001827872008E
Then if you want to know about the MDM7.1,find below link for quick review on MDM
http://help.sap.com/saphelp_nwmdm71/helpdata/en/index.htm
Hope it is useful!
Thanks
Yugandhar

Unable to deploy the war file generated from jdeveloper to tomcat

Hi
I was able to deploy the war file after modification in the web.xml but unable to run the servlet application
Please Help
Dolphy

After going thru all the steps specified in online help to deploy the web application in Tomcat server.
I am getting the following error
first the webapps could not be deployed because of url pattern
<servlet-mapping>
<servlet-name>mypackage1.BIController1</servlet-name>
<url-pattern>mypackage1.BIController1</url-pattern>
</servlet-mapping>
which when i change to
<servlet-mapping>
<servlet-name>mypackage1.BIController1</servlet-name>
<url-pattern>\mypackage1\BIController1</url-pattern>
</servlet-mapping>
deploys the application
but i get the following errors in the tomcat log file
2004-05-03 10:34:12 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2004-05-03 10:34:12 StandardContext[jsp-examples]ContextListener: contextInitialized()
2004-05-03 10:34:12 StandardContext[jsp-examples]SessionListener: contextInitialized()
2004-05-03 10:34:13 StandardContext[servlets-examples]ContextListener: contextInitialized()
2004-05-03 10:34:13 StandardContext[servlets-examples]SessionListener: contextInitialized()
2004-05-03 10:34:13 StandardContext[webapp1]Marking servlet uix as unavailable
2004-05-03 10:34:13 StandardContext[webapp1]Error loading WebappClassLoader
delegate: false
repositories:
/WEB-INF/classes/
----------> Parent Classloader:
StandardClassLoader
delegate: true
repositories:
file:C:\tomcat\shared\classes\
----------> Parent Classloader:
StandardClassLoader
delegate: true
repositories:
file:C:\tomcat\common\classes\
file:C:\tomcat\common\endorsed\xercesImpl.jar
file:C:\tomcat\common\endorsed\xmlParserAPIs.jar
file:C:\tomcat\common\lib\ant.jar
file:C:\tomcat\common\lib\commons-collections.jar
file:C:\tomcat\common\lib\commons-dbcp-1.1.jar
file:C:\tomcat\common\lib\commons-el.jar
file:C:\tomcat\common\lib\commons-pool-1.1.jar
file:C:\tomcat\common\lib\jasper-compiler.jar
file:C:\tomcat\common\lib\jasper-runtime.jar
file:C:\tomcat\common\lib\jmx.jar
file:C:\tomcat\common\lib\jsp-api.jar
file:C:\tomcat\common\lib\naming-common.jar
file:C:\tomcat\common\lib\naming-factory.jar
file:C:\tomcat\common\lib\naming-java.jar
file:C:\tomcat\common\lib\naming-resources.jar
file:C:\tomcat\common\lib\servlet-api.jar
----------> Parent Classloader:
sun.misc.Launcher$AppClassLoader@4afa9e
oracle.cabo.servlet.UIXServlet
java.lang.ClassNotFoundException: oracle.cabo.servlet.UIXServlet
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1383)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1230)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:979)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:887)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3959)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4284)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:866)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:850)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:638)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:320)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:875)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:727)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:477)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1008)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:394)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1134)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:832)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1126)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:521)
     at org.apache.catalina.core.StandardService.start(StandardService.java:519)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2345)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:594)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:297)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:398)
2004-05-03 10:34:13 StandardContext[webapp1]Servlet /webapp1 threw load() exception
javax.servlet.ServletException: Wrapper cannot find servlet class oracle.cabo.servlet.UIXServlet or a class it depends on
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:989)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:887)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3959)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4284)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:866)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:850)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:638)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:320)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:875)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:727)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:477)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1008)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:394)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1134)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:832)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1126)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:521)
     at org.apache.catalina.core.StandardService.start(StandardService.java:519)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2345)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:594)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:297)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:398)
----- Root Cause -----
java.lang.ClassNotFoundException: oracle.cabo.servlet.UIXServlet
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1383)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1230)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:979)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:887)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3959)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4284)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:866)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:850)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:638)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:320)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:875)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:727)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:477)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1008)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:394)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1134)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:832)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1126)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:521)
     at org.apache.catalina.core.StandardService.start(StandardService.java:519)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2345)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:594)
     at java.lang.reflect.Method.invoke(Native Method)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:297)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:398)
Thanks
Dolphy

Bind the output data (Xml) from BPEL process to ADF SelectOneChoice Control

Hello,
My requirement is to invoke a BPEL process from ADF page and display returned results in a select one choice (drop down box).
I have created a Data Control for the BPEL process through Web service data control and tried to invoke the BPEL process. I could see from the BPEL console that BPEL process is getting invoked. But the ADF doesn't bind any of the output to Select one choice.
It doesn't even show any error.
Can you plz help me how to bind the output of the BPEL process to ADF SelectOneChoice control.
The Xml Which I recieve from BPEL process is
<outputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload"><DBConnectDemoProcessResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/DBConnectDemo">
<StatusTrans xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/DBSelect">
<transId>1</transId>
<fromStatus>Open</fromStatus>
<toStatus>Assigned</toStatus>
</StatusTrans>
<StatusTrans xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/DBSelect">
<transId>2</transId>
<fromStatus>Open</fromStatus>
<toStatus>Pending</toStatus>
</StatusTrans>
<StatusTrans xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/DBSelect">
<transId>3</transId>
<fromStatus>Open</fromStatus>
<toStatus>Closed</toStatus>
</StatusTrans>
<StatusTrans xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/DBSelect">
<transId>4</transId>
<fromStatus>Open</fromStatus>
<toStatus>Cancelled</toStatus>
</StatusTrans>
</DBConnectDemoProcessResponse>
</part></outputVariable>
And the toStatus node values viz, Assigned, Pending, Closed, Cancelled should get binded to the SelectOneChoice control
Waiting for your valuable inputs,
Regards,
babloo.

I have been still trying for the solution. I have modified the XSD created by the jdeveloper to,
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/StateTransitions"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="StateTransitionsProcessRequest">
          <complexType>
               <sequence>
               <element name="input" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="StateTransitionsProcessResponse">
          <complexType>
               <sequence maxOccurs="unbounded">
<element name="stateChanges">
<complexType>
<sequence>
<element name="fromState" type="string" />
<element name="toState" type = "string" />
</sequence>
</complexType>
</element>
</sequence>
          </complexType>
     </element>
</schema>
And I have given this XSD url while creating the Web Service Data Control by deploying it into the Oracle App server.
So, I can see the tree structure of "Return" as "StateTransitionsProcessResponse->StateChanges->toState,fromState"
I have binded the toState field of the Data Control to the SelectOneChoice ADF control in a jspx page by using List binding editor.
I have selected,
Base data source as "Variables" (Currently I don't need to update any table),
List Data source as "process: getStateTransitions.process.StateTransitionsProcessResponse.stateChanges" (Web Service Data Control)
Base Data source attribute as "process_input"
List Data Source Attribute as "toState"
I can initiate the web service (BPEL process) by providing the necessary input value like 'Open' or 'Pending' or 'Assigned' but the SelectOneChoice control doesn't populate with any values.
Waiting for valuable inputs!
Thanks and Regards,
babloo.

Let me know link to JDI ESS Cookbook from the SAP-Note: 872892

Hi,
Can anyone plz let me know to download the JDI ESS Cookbook from the SAP-Note: 872892 from market place. Its urgent.
Thanks in advance.
Raj.

Hi Lohitha,
Can u give plz provide me any step by step document or assistance is customizing Web Dynpro ESS in DTR perspective. Previoulsy I haven't worked on customizing the ESS package.
Right now, I am working on EP7 sandbox.
Appreciate, if u can explain or provide any doc on working in DTR perspective.

Where does the html source when using paramform=html generated from?

I have changed my server name and I have found that when I have paramform=yes or html in the url for the report, the html source of the paramform that is displayed uses the old server name.
Does anyone know where the paramform is generated from, or is it just a template?
If the report does not require any parameters and I have paramform=no in the url, then it works correctly.

Go to TextEdit preferences and set everything to Plain Text instead of Rich Text and make sure you check the box for "ignore rich text commands in html files".

FI documents generated from RE-FX are not being summarized

The Fi documents generated from periodic posting in RE-FX are not being summarize, even thou the have the same customer, the same flow type and account determination.
I checked the corresponding customizing Item related and the seem to be right. The system seems to be skiping this.
I have 2 conditions in the RE contract that goes to the same flow type and account determination but the document is generated with the two separated line item.
Tanks in advance
Noel.

Hi Noel,
I guess you have already checked your customizing.
If you are technically interested you may have a look into the
coding to see which fields are checked and must be equal for
summarization.
class: CL_RERA_DOC_ITEM_CNDS
method: CONDENSE_APAR_ITEMS
If you set a breakpoint there and follow the program you may see why the items are not condensed.
Regards, Franz

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

Repricing the SAP contract generated from follow up doc in copy control

Similar Messages

Maybe you are looking for