Required JAR's for developing custom adapter modules for PI 7.31 SP 09

Hello experts,
I have a new development wherein i have to consume .xlsx files in PI 7.31
i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning to go for custom module development for conversion of .xlsx file into xml
so need your help for finding the JAR's for PI 7.31 and also some custom JAVA source code for conversion of excel spreadsheet into XML.
Regards,
Sushant.Shinde

Hi sushant,
The module key seems correct ffor you. But the blog you shared is cozy. I developed 4 adapter modules using a document. Please refer that.
And NWDS EHP1 is available you can use that to be perfectly sure on compatibility.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true
use the above document to verify the steps you followed-
Please provide following screenshots
NWA->configuration->infrastructure->Application Modules-> and search for *xlmodule*
if you find your module then click on it and at the bottom there will be a window with JNDI Name. Share that JNDI name and use that JNDI name in your Module. (localejbs/JNDIName).
Also go to NWA->TroubleShooting-> JNDI Browser and see where is your Adapter module situated. I mean under which directory. Either directly inside root/localejbs/ or root/localejbs/sap.com.
Please verify your steps according to that and redeploy and share result.
and Go to NWA- Site Map-> find Start & Stop
In that go to Java Applicaitons Tab and search for your module. It must be started. If it is stopped try starting it.
Regards,
Vikas

Similar Messages

Any Best Practices for developing custom ABAP reports for Portal?

Hello,
The developers on our project are debating the best way to develop custom reports and make them available on the portal. Of these options that we can think of, can you give any pros & cons, or experiences, or other options?
- Web-enabled Abap report programs
- WebDynpro for Abap
- WebDynpro for Abap using ALV
- Adobe forms
Does a "Best Practices" document or blog exist on this topic?
Thanks,
Colleen

Re: Using p_trace=YES

Adapter Module for File Adapter

I have a scenario where I have 2 related files (text file and a pdf file) for the message. I need to enhance the payload (content conversion from text file) with the size of the pdf file. I have developed a adapter module for this and it is working fine if there is 1 set of text and pdf file. But if there are more than 1 set of files, it is processing the first set and giving the below error for other files.
"Error: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback."
Regards
Yogesh

check this thread :
BaseTransactionRolledbackLocalException in custom adapter module
Exceptions in Recievr Communication Channel with Adapter Module

Developing Custom Adapter guide needed

Can any one provide me the guide for developing custom adapter. Also provide the API for OIM 9.0.3.

API Documentation is shipped along with the download. You should be able to access the same from the <DIR>documentation\ProductDocumentation\b25942\toc.htm (9011 Connector Pack). Check with Support if you haven't got it along with the product.
Again, not sure if I understand the Q correctly, since I dont think there is a generic methodology for custom adapters. They range from usage in tasks of resources to custom scheduled task. Is is something specific you are looking for?
Rgds, Ajay

Developing adapter modules for PI 7.0 using NWDS 7.3

Hello all,
Did someone have already developed adapter modules for PI 7.0 using NWDS 7.3? I can´t find the EJB libraries for Java 1.4.
I'm able to develop mapping programs, but I'm not sure if it is possible to create EJB projects.
Thanks,
Marcos

Hi Marcos,
I haven't tried developing adapter modules in NWDS 7.3 for PI 7.0 myself, but according to the documentation from SAP it is possible to develop J2EE 1.4 compliant applications i.e. EJB 2.1 components, which is used by SAP PI 7.0.
[http://help.sap.com/saphelp_nw73/helpdata/en/48/fc1e73a0ad2637e10000000a42189d/frameset.htm]
Because of this backwards-compatibility I would expect that the EJB libraries for J2EE 1.4 should be available directly in NWDS 7.3 somewhere.
Best regards,
Jacob

From Where can i download Jar Files for creation of adapter Module.

From Where can i download these Jar Files.
aii_af_mp.jar à the interface Module
aii_af_ms_api.jar à Dealing with payload and attachment
aii_af_trace.jar à Writing Trace
aii_af_svc.jar à Adapter Services
aii_af_cpa.jar à Reading Channel Entries
aii_af_ms_spi.jar
aii_af_cci.jar
for creation of adapter Module.

As k you basisn team,they will provided it.
usually these jars files available in server, in usr.repositoy folder,if you have server level access then you can copy it else contact your basis team.
or you can download it from service market place.
Regards,
Raj

Regarding Adapter Module for Duplicate file handling at Sender side

Hi All
my requirement is to develop a adapter module . Source is FTP target is R/3 .source Commuincation cahnnel is File sender .
want to handle duplicate files
can any one provide me what are all the steps being used for the same .
any step-via -step doc will be helpful for me ......and adapetr module will be written in NetWeaver Developer studio or which s/W ????
also where to put the ejb or import the ejb s...
Pls help
Regards
Priya

Hi Priya,
YES YOU NEED SAP NetWeaver Developer studio to develop Adapter Modules,or you can use any othe IDEs like Eclipse ....many documents available in sdn ,how to develop AM,refer below link it explaines clearly
let me know which version of XI u working on,if it PI7.1 jar files different.
http://wiki.sdn.sap.com/wiki/display/stage/AdapterModuleToReadExcelFilewithMultipleRowsandMultiple+Columns
Regards,
Raj

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

Unable to deploy custom adapter module in PI 7.31

Hi pros,
I created a custom adapter module to split some complex input files to multiple messages. We use a SAP PO 7.31 java-only installation. I followed this document to create my adapter module:
How to Create Modules for the JEE Adapter Engine
I know it is for PI 7.1 but a colleague of mine said that he was able to create a running adapter module for PI 7.3 following the guide. I created the following projects:
EAR project references the EJB project:
Project facet of the EJBproject:
ejb-jar.xml config:
application-j2ee-engine.xml (in EAR project):
When I try to deploy my module, I get the following error:
Java version:
NWDS version:
Any hint is appreciated! What can be wrong? What can I check again?
THANKS!
Message was edited by: Stefan Münchow

I am not sure if the version is the problem. We have PI 7.31, support package 14, patch level 0 and NWDS 7.31 support package 12, patch level 4. The version of NWDS is lower than the version of the PI. According to Note 1599298 the error occurs when the NWDS is higher than the one of PI. Besides, we are able to deploy BPMN processes with the same NWDS to the same server.
This is the exact exception trace shown in NWDS:
com.sap.ide.eclipse.sdm.deploy.DeploymentException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:110)
------------- Nested exception -------------------
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:862)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.ide.eclipse.deployer.dc.deploy.DeployProcessor70.deploy(DeployProcessor70.java:105)
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:80)
Caused by: com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:246)
at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100)
at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:167)
at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:138)
at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57)
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213)
... 8 more
Caused by: com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [deploy] of [/usr/sap/DP2/J64/j2ee/cluster/server0/temp/tc~bl~deploy_controller/archives/213/SplitArticleFileModule_EAR.ear] failed
at com.sap.engine.services.deploy.server.DeployServiceImpl.catchDeploymentExceptionWithDSRem(DeployServiceImpl.java:3370)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:315)
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:139)
... 11 more
Caused by: com.sap.engine.services.deploy.container.rtgen.GenerationException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:100)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.generate(WebServicesGenerator.java:54)
at com.sap.engine.services.deploy.container.rtgen.AnnotationsSupportingGenerator.generate(AnnotationsSupportingGenerator.java:27)
at com.sap.engine.services.deploy.ear.jar.moduledetect.GeneratorWrapper.generate(GeneratorWrapper.java:43)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generate(ModuleGeneratorTool.java:110)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateOverExistingModules(ModuleGeneratorTool.java:97)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateModules(ModuleGeneratorTool.java:80)
at com.sap.engine.services.deploy.ear.jar.EARReader.read(EARReader.java:240)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.prepareNewDeploymentInfo(DeployUtilTransaction.java:217)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:199)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1836)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:360)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:313)
... 12 more
Caused by: java.util.zip.ZipException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:154)
at java.util.jar.JarFile.<init>(JarFile.java:141)
at java.util.jar.JarFile.<init>(JarFile.java:105)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesSupportHandlerImpl.generateWebSupport(WebServicesSupportHandlerImpl.java:79)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:69)
... 26 more
Maybe the used jar files could be the problem?

Adapter Module for receiver IDOC adapter?

Hi,
I have a scenario where i need to do some custom logging in the receiver adapters. For all receiver file adapters, i have written an adapter module which fulfills this custom requirement but how will i do this in the receiver IDOC adapter as its on the ABAP stack? I cannot write a java adapter module for this.
Is there anyway by which i can write a ABAP adapter mosule and deploy it in the IDOC adapter? Or any other way to achive it. the scenario is such that i need to do the logging before the idoc is posted into R/3 system by the idoc adapter.
Please advice.
Regards,
Yash

Hi Chirag,
Yes i have seen that the module tab is disabled for idoc adapter. I have a fin interface where i need to split a incoming file into an idoc and a file. For this purpose i need to log how many records are received by each adapter and the sum of the line items for audit perspose.
any othr way to do it apart from doing it in message mapping. The req is to do in the adapter engine.

Adapter Module for SSL Configuration

Hi,
We have JMS -> PI -> SAP ECC scenarios (both way).
We have to develop an Adapter Module which will be able to provide SSL communication with the end-system (JMS). We have a JAVA developer who will help in writing the module code; however he is not sure about SSL (encryption and decryption).
Can anyone please provide me a reference which implements SSL using JAVA code; something which a core JAVA-developer can understand.
Thank you,
Pankaj.

Hi,
From the JMS adapter FAQ note : 856346,
Security
Question: How do I use the security mechanisms of my JMS provider (such as encryption and client authentication)?
Answer: For the most part, you cannot use them at present. JMS does not specify an API for controlling and calling security functions, and therefore JMS cannot control them. In theory, it is possible for the JMS administered objects to be preconfigured with security attributes and created in an LDAP directory that the JMS adapter accesses using JNDI. For the most part, however, this solution is incomplete. It requires additional data (such as the client or server certificate) to be transferred frequently when the QueueConnectionFactory or the queue is created, using methods that are specific to the provider (because they are not specified by JMS, see above). In general, a normal JMS adapter does not recognize these methods.
http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
JMS Adapter Question
Drivers for different Queuing series in JMS Adapter , Secutity Level..
Regards
Pothana

Custom Login Module for EP7

Hello Experts,
i have a requirement to develop a custom Login Module for EP7. I am fine with the programming part and on this side everything should be fine. I am puzzling about the configuration. My LoginModule is configured according to this link: [SAP HELP|http://help.sap.com/saphelp_nw2004s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/content.htm]. But when i configure sap.com/irj*irj in SecurityProvider in Visual Admin, the changes do not take affect. I restarted the portal as well as the Server. I am on NW2004s SP 14.
What am I missing.
Thanks for any help,
best Regards,
Rene

Hello Laura,
thank you for your reply. I have read you link and I doubt that this is the solution. In authschemes.xml you define the user interface for authentication and priority. In Visual admin, you can define the loginModule for your Scheme. But this must be possible without defining an authscheme. Am I right? In my understanding you only have to declare the loginmodule for the application in Visual Admin. And thats it.
So what i have to do to change the login module for the Portal (irj).
Any help will be appreciated,
best regards,
Rene

SAP PI crashes because of Custom Adapter module

Hi,
We are facing a strange problem. We have deployed a custom adapter module developed in java which accesses a Hardware Security Module(HSM) and uses the keys in HSM to digitally sign our data. Now, when I use particular methods in this code and deploy it on PI server, the server crashes while testing this out. As soon as I run the channel having this adapter module, PI server becomes unavailable. It restarts on its own after a few minutes.
One of the reasons I identified to be causing this issue is the signing mechanism used in code. When I used a mechanism that was not supported or not correct, it crashed the server. If i corrected it, it worked fine. I found no other thing in my code causing this behaviour apart from this mechanism. But I am still not able to understand how a single method in a code can cause the whole server to crash. Has anybody here faced such a problem? Any pointers would be appreciated.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi Desai

Hi Ravi
1. To check if it is a memory issue. Once you start the channel, check the memory usage in nwa. Check if the memory is increasing once the channel is started.
2. Add debug statements to print logs in default traces at as many places as possible. Since your code is not reaching the Catch block, using the debug statement you can reach the line in the code which is causing this issue.
Regards
Osman Jabri

How to develope custom function modules in SAP R/3 system to maintain c...

How to develope custom function modules in SAP R/3 system to maintain cross
referencing tables for sales order number.

Hi Raja,
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Hope this information is useful to you..
Reward points if it is usefulll....
Thanks ,
Satya Kumar..

Adapter Module for Sender File Adapter to access a Flat file

Hi,
We have a scenario where the source is a flat file.I want to develop an Adapter Module to make a small change to every line in the Flat file.
Now how do we read a flat file in the Adapter Module?Coz the flat file will be converted to XML file by the Standard Adapter Module of the File adapter.
Please help me out with this.
Thank you,
Anu.

Hi Anu,
If you are not using Content Conversion option Standard Adapter Module does not convert the Flat file to XML .
You can directly access the payload as it is in flat file in the Adapter Module and make changes.
Use the Standard classes ModuleData & moduleContext to fetch the Payload.
chk this :
Customized Sender Adapter Module
XI: Read data from PDF file in Sender Adapter
regards
Ganga

Required JAR's for developing custom adapter modules for PI 7.31 SP 09

Similar Messages

Maybe you are looking for