Resolve IDoc Errors

Could anyone define the ways in which IDoc errors are resolved?
Based on my understanding, any IDoc processing error (inbound or outbound) creates a pre-defined or custom workflow that eventually leads to the modification (if necessary) and re-processing of the IDoc.

Hi Kevin,
   You can resolve the Errors in IDOC processing in different ways.
In Outbound:
Status     
29           Error in ALE Service (Problem can be in the Partner profile settings)
30           Idoc ready for dispatch (Execute the Report RSEOUT00 )
26           Syntax error in IDOC (When IDOC Data records are created properly)
We can use the Tcode BD87 to monitor the idocs and Reprocess the Failed idocs
In Inbound Processing
Status
51         Application doc not posted (When IDOC contains data that cannot be updated in the receiving system. Such as integrity errors, Missing mandatory fields etc.
Display the Application log to find the errors.
We can use IDOC test tool WE19 and execute the inbound processing using the inbound Function module in Debugging mode.
56   or 65  : Check the Partner profile settings.
62 : Application doc has to be posted using the report RBDAPP01
Hope this info  would help you.
Regards,
Varma

Similar Messages

  • IDOC Error Number:29 : Error in ALE service

    Hi Experts,
    Already checked & read couple of threads on this but no help.
    I have a scenario to send Vendors information out from my ECC system to MDM via XI.
    I am using IDOC Extension ZCREMAS to do so.
    Steps already done:
    Sender System: ECC Dev System
    Receiver Syste: XI Dev system
    Port Config: SAPXI ( RFC Destination as XI system )
    Partner Profile: XI Dev system->Outbound Parameters -> CREMAS & SYNCH ( CREMAS -> Configured the Z extension & Message Function )
    Business Distribution Model : Defined Sender, Receiver & Message Type as Above.
    When I try to Generate the partner profile it gives message 'No messages have been defined for the selection conditions in the model' with Status ICON as Green.
    Now if I go to BD14 and try to execute the program for message type CREMAS it says :
    63 master IDocs set up for message type CREMAS.
    0 communication IDoc(s) generated for message typeCREMAS
    If I try to debug I find the problem in FM ALE_MODEL_DETERMINE_IF_TO_SEND  While calling ALE Distribution model where it failes to determine the Sending system as : DEV.
    However, I am not sure how to resolve this error or am I missing any other setting in ECC?
    If I try to generate test IDOC via WE19 it works fine.
    Thanks,
    Abhinav.

    Your sender destination is wrong, check with SCC4, i.e. make sure that you have given correct logical sytem name in sender and receiver in the model view.
    Also... be sure that the LS identifier you're using is actually assigned to the client you expect (SCC4 transaction let's you look at the clients and their assigned LS identifiers)

  • IDOC error while receiving

    Hi Friends,
    In my scenario, I have to receive P.O. message from partner in to my R/3 system.
    I am using PI 7.1
    When partner is sending me message I am getting error , "Only asynchronous processing supported for IDoc adapter outbound processg" in SXMB_MONI
    I tried to find solution on sdn, and I got 2 related foroum,
    Idoc Error
    Re: No receiver could be determined. (File to Idoc)
    But from this also I am not sure hw can i solve this error.
    Please Suggest.
    Thanks & Regards,
    Brijesh Soni

    Hi
    For Error Only asynchronous processing supported for IDoc adapter outbound
    IDOC adapter support asynchronous only,
    Check Quality of Service in your sender adapter. Should be EO or EOIO, not BE.
    This thread had same problem and resolved :
    Re: No receiver could be determined. (File to Idoc)
    In Your case QOS is BE. Plz check in your CC if and BE is by default..
    If you use BE, HTTP expects a Response back and as IDOC does not support BE, you go the earlier error.
    http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
    Regards
    Abhishek
    Edited by: Abhishek Agrahari on Jan 21, 2009 3:14 PM

  • IDOCS Error - Not getting processed automatically

    Hi All,
    We are loading hierarchy for a Product from R/3 system using the standard datasource.
    When we execute the info package, IDOCs are not getting processed automatically.
    We are facing the below error message.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    No status record was passed to ALE by the applicat
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
    Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
    Thanks in Advance
    Regards,
    Sachin

    Hi,
    This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
    Hope it helps a lot.
    Thanks and Regards,
    Kamesham

  • Idoc Error : Status 63

    Hi,
    Please let me know how to resolve error status 63 in idocs.
    Regards ,
      Shankar GJ
    Edited by: Shankar GJ on Mar 11, 2008 5:45 AM

    Hi,
    IDoc status 63: Missing or incorrect partner profile
    To receive an IDoc in the SAP system from the external system, you must define the outbound partner profile for the message type and all relevant partners.
    For more information, see Interfaces ® External Systems ® Configure Warehouse Management ® Communication Ext. System -> R/3 ® Maintain Partner Profile in the Implementation Guide for Warehouse Management.
    If the system cannot find the partner (that is, the connected partner system) for receiving the IDocs, proceed as follows:
    Define the missing partner profile.
    Trigger receipt of all existing IDocs, which the system has not yet been able to process, again.
    For this error, the system triggers a workflow work item for the standard task Input: Error processing with IDoc and sends a message to the inbox of the corresponding user.
    From the inbox, you trigger the subsequent transmission of the IDocs which contained errors.
    Errors in partner profiles normally only occur in the test run.
    Taken from below link!!
    Processing Technical IDoc Errors
    Reward if helpful..
    Thanks,
    Sathish Raj

  • Hi Ragarding....Idocs Errors, ODS Functionality

    Hi Gurus
    Pls Urgent
    Can U explain the --> Idoc Errors....and how to solve
                              ---> Ods( Whether functionality...Addition / Subtraction)
                              ---> Ticket Procedure and how do maitain this
                              ---> how many views can  be created in generic Extraction         
    pls do the needful
    regds
    Pandu

    HI,
    ODS : has overrite functioanlity where info cube has additive fucntioanlity.
    So, every time we shud recommend ODS in between datasource and Infocube.
    Another imp point is , if the datasource is not supporting delta fucntionality, how do we handle the situation? right.
    So use ODS, from the datasource load the data till ODS and as ODS contains changelog with 0recordmode with before and after images, we can perform the delta functinality to the Cube.
    Ticket procedure:
    See, we have third party ticketing tools like Gremedy, clarify, lotus notes etc.
    Ticket means- defect or issue in the data or application or technical object.
    So user raises the ticket and it wil assigned to concerned technical resource by the helpdesk and based on the priority of the issue, technical peopel should resolve the issue or ticket with in the SLA(Service level aggrerment).
    Views : View is nothing but a image of the tables.
    So we can call up multiple tables in a view for generic extraction.
    Hope this info helps.
    Thanks,Ramoji.

  • How to resolve attribute errors

    Hi,
    When I am trying to click on an lov item I am getting the following error
    Attribute TransactionTypeId in CreateArInvoiceAM.CljReceivableSlipsEOVO1 is required
    I would get the TransactionTypeId only when I select an item from the lov but before selecting the lov itself I am getting this error.Can anyone tell me how to resolve this error.
    Thanks for your help in advance.

    Do you have any open method invocation in the processFromRequest? Just start the debugger and see how is the code progressing. Seems some method is getting invoked unintentionally.

  • I tried downloading the 30-day free trial and I kept getting "failed" message 49. How do I resolve this error?

    I tried downloading the 30-day free trial and I kept getting "failed" message 49. How do I resolve this error?

    Hi Charmaine,
    Please follow the article: Error downloading, installing, or updating Creative Cloud applications which might help to solve the above error message.
    Thanks,
    Ratandeep Arora

  • How do I resolve this error message? The iPhoto library is on a locked volume.  Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

    How do I resolve this error message? The iPhoto library is on a locked volume.  Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

    Hi j,
    I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

  • IDoc error In case of ERS procedure, please enter terms of payment

    Hi,
    I tried to use BAPI_PO_CREATE1 to post purchase order. However, I encountered this error.
    IDoc error In case of ERS procedure, please enter terms of payment
    I passed the payment term in IDOC PORDCH. Segment E1BPMEPOHEADER-PMTTRMS has value filled out. This value is passed into the BAPI correctly but for some reasons, it got cleared out in the BAPI. Any ideas or suggestions would be greatly appreciated.
    Thanks

    Check
    BAPI_PO_CREATE1 -  E 06 436 In case of account assignment

  • What class should be imported to resolve the error

    Dear all,
    would you please tell me that what class should i import to resolve the error for PreparedStatement.
    plz mention the import statement
    Error(437,13): class PreparedStatement not found in class oracle.apps.ak.cacheoffice.server.CacheOfficeAMImpl

    import java.sql.PreparedStatement;

  • IDoc Errors in ECC

    Hi Experts,
    what kind of IDoc Errors can occur in ECC for the scenario :
    ECC sending <b>PO</b> to Ariba(E-commerce hub, using third party adapter) and in receiving back <b>Order confirmation</b> from it.
    Thank you,
    <b>MK</b>

    Hi,
    This depends on the design and landscape and also Disaster Recovery or High Availability Plan.
    some hints:
    1. Connection Problem: Because of timeout , unavailability of the Receiver system.
    2. Data Problem may cause you the error in IDoC posting [ probably functional/Business Team should look into this]
    3. User ID and Password Maintenance - it may hit sometimes
    4. If any pre-requisite process is required to process this IDoC, then problem in the pre-requisite process will lead the problem
    these all kind of problems you may face..
    Rgds , Moorthy

  • How to resolve the error in trigger

    Hi,
    I've written the trigger and the logic is correct but unable to resolve the error.. Could you please suggest me to resolve the error...
    Solved
    Thank you
    Edited by: Smile on Feb 19, 2013 2:34 AM                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Yes you can very well do that
    See the example below. I have three tables.
    SQL> create table t1(no integer)
      2  /
    Table created.
    SQL> create table t2(no integer)
      2  /
    Table created.
    SQL> create table t(no integer)
      2  /
    Table created.I have inserted sample data into t
    SQL> insert into t
      2  select level
      3    from dual
      4  connect by level <= 10
      5  /
    10 rows created.
    SQL> commit
      2  /Now i want to insert even numbers into table t1 and odd numbers into table t2
    SQL> begin
      2     insert all
      3             when (mod(no,2) = 0) then
      4                     into t1 (no) values(no)
      5             else
      6                     into t2 (no) values(no)
      7     select no
      8       from t;
      9  end;
    10  /
    PL/SQL procedure successfully completed.The output is below...
    SQL> select * from t1
      2  /
            NO
             2
             4
             6
             8
            10
    SQL> select * from t2
      2  /
            NO
             1
             3
             5
             7
             9Thanks,
    Karthick.

  • Help required to resolve -200022 error

    Hi all,
    I have a VI that is throwing the -200022 error (after the DAQ mx). This has got 5 data acquisition channels out of which 2 of them (THERMOCOUPLE Channel1 & Pressure sensors - Channel 1 commented on the left inside the program) are throwing this error and not reading anything sensible and the program stops. However the other channels are reading proper values. When I checked them individually it works perfectly alright but when I put them together in the same program it is throwing the above error.
    I looked into some of the solutions suggested but nothing has helped. Can anyone help me resolve this error. I have attached the VI as well.
    Many thanks,
    Ramji
    Solved!
    Go to Solution.
    Attachments:
    NI help - LabVIEW program1 - Slow measurement during transients.vi ‏3796 KB

    Got it..!!
    You're using 'On-Board Clock' for all of three Tasks (thermocouple measurement) and its causing conflict..!!
    If you see here, the main reason (as I already specified) is "Resource requested by this task has already been reserved by a different task."..
    I would suggest you to club all three task into one...!!
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.
    Attachments:
    Merge Tasks (Version 2009).vi ‏726 KB

  • IDoc Error 51 - Make Entry in All Required Fields

    hi,
    I am using a scenario where an idoc is being posted into an R/3 system from a legacy application. For some reason I keep getting Idoc error 51 (Document not posted).
    Once I drill down further, the specific error states "Make entry in all required fields". Have checked to make sure all mandatory fields have been mapped and proper constant values have been specified.
    But cannot seem to get rid of the problem. Could anybody help out in determining how else to troubleshoot this and identify the possible cause?
    thx,
    Manpreet

    Manpreet,
    What IDoc Type you are trying to post ? One way is debugging the inbound function module using WE19. The second option is talking to a functional consultantor who worked, what fields are needed for that particular IDoc.
    I wouldn't care much about whether the IDoc is posted or not because, it is the ABAP ALE/EDI consultant's job to do that. The only way XI Developer is concerned is when it is not posting, ABAPer would tell what's missing.
    Hope this info helps.
    regards
    SKM

Maybe you are looking for