Resolve #multivalue

Hi All,
vertical table i have applied the report level report .if i select any single measure it's working fine else i select the category measure(all values)
it showing the #multivalue error. how to fix this.

Hi Stefan Jay,
Use =Sum([Measure]) formula in the report.
If this will not resolve your issue then share the screenshot of the issue.
Regards,
Anish

Similar Messages

How to resolve #Multivalue Error

HI All,
I have a data like below, in this for inpatient data is NULL and as per business requirement if data is null then "0". so i create a variable and drag into inpatient's total column
statement for inpatient is
=If IsNull([total]) Then 0 Else [total] Where ([items]="Inpatient")
items total
Office
4
Utilization
70
Inpatient
it is working and showing as "0"
but when inpatient has value it is showing #multivalue"
Office Visits
4
Non-Emergency ED Utilization
70
Inpatient Stays
40
how to resolve is issue
Please reply i am using SAP BO 3.1 INFOVIEW
Thanks in advance
Ranjeet

Hi Ranjeet,
First thing is you are getting this error because of the where clause used in the variable.
Because in the 2nd case when it has value for Inpatient, it is actually taking the same value for all the 3 cases.
How to remove null value with 0:
1. Remove where clause from the variable and use that variable in place of Total in the table report.
2. Use format number option to place 0 in place of undefined values.
Hope it helps. Please ask if you have any queries.
Regards,
Subrat

#MULTIVALUE When it Occurs and How Do I resolve it

I have a query and report built from two different data providers. One of the data providers is a reference universe that I have a query called Material Item which provides descriptive informaiton about an item of a shipment that I want to include in my shipments report.    I've merged the dimensions of the two queries on "Material Item Identifier" I then added the joined dimension Material Item Identifier, and also a detail object (Material Item Name) I created since it wouldn't let me drag and drop this dimension on the report saying "incompatible object".
The problem I am having now is the detail object column in the report called "Material Item Name" some of the fields display the item name as it should, and then other fields give me the #MULTIVALUE.   How do I need to change the report to get rid of the #multivalue and so the item name displays in the column right after Material item identifier in my shipments report?

I was unable to use the sum function because the data types I am working with for Material Item Identifier and Material Item Name are text string data types. I did change the option to avoid duplicate row aggregation and my query which is still running as I am typing this has been running for about 10 minutes now. I'm wondering if I should try setting a record or time limit on the query now without affecting the results I need for the report. Below is a sample of my report data. I unchecked the avoid duplicate row aggregation and it only took a few minutes for my report to run. Here is a sample of the data that is returning to me in the report. The full thing is about 4 pages worth.
Order Number     Materiel-Item Identifier     Item Name     Status     Status Date/Time     Pcs
M9854113361ADQXXX     1005015860114     FORKLIFT     ARRIVE         12/14/2011     1
MWX7D$Y4AB6F430XX     2320015430651     TRUCK,WRECKER,LVSR     ARRIVE         12/14/2011     2
M9531213447002XXX     6115015484221     #MULTIVALUE     ARRIVE         12/14/2011
M283211255E791XBX     6625015358961     #MULTIVALUE     ARRIVE         12/14/2011     2
M283211255E791XZX     6625015358961     #MULTIVALUE     ARRIVE         12/14/2011     2
M283211341A001XAX     6635015823197     #MULTIVALUE     ARRIVE         12/14/2011     2
M9854112642001XXX     2355015393618     #MULTIVALUE     ARRIVE         12/14/2011     9
M140301061E002XXX     1440014118942     #MULTIVALUE     COMPLETE      12/14/2011     4
MWX7D$H00046C30XX     2355015759632     #MULTIVALUE     CURPOS         12/14/2011     11
MWX7D$S2007C970XX     2320015305684     TRUCK,DUMP     CURPOS         12/14/2011     12
MWX7RAED2DACA10XX     2320015305684     TRUCK,DUMP     CURPOS         12/14/2011     5
MWX7RAJD6A85CE0XX     2320015520250     TRUCK,ARMORED,DUMP,WIHTOUT WINCH,REDUCIBLE     CURPOS         12/14/2011     6
MWZ51B000008AC0XX     2320015402007     #MULTIVALUE     CURPOS         12/14/2011
MWX7RAFZ0009770XX     2320015187330     #MULTIVALUE     CURPOS         12/14/2011     28
MWX7RAFZ0009770XX     2320015402038     #MULTIVALUE     CURPOS         12/14/2011     28
MWX7RAFZ0016180XX     2320015187330     #MULTIVALUE     CURPOS         12/14/2011     30
MWX7RAFZ0016180XX     2320015402038     #MULTIVALUE     CURPOS         12/14/2011     30
MWX7RAFZ007CC10XX     2320011231602     LIGHT VEHICLE     CURPOS         12/14/2011     29
MWX7RAFZ007CC10XX     2355015393639     #MULTIVALUE     CURPOS         12/14/2011     29
MWX7RAGQ0002FC0XX     2320007826848     #MULTIVALUE     CURPOS         12/14/2011     25
MWX7RAGQ0002FC0XX     2320015402017     #MULTIVALUE     CURPOS         12/14/2011     25
MWX7RAGQ00547A0XX     2320015402038     #MULTIVALUE     CURPOS         12/14/2011     26

#MULTIVALUE error

Hi,
I searched the forum for #MULTIVALUE error but didn't get the proper answer.
I'm getting the #MULTIVALUE error in a webI report on top of a BEX Query universe.
Ex: Vendor has multiple Vendor Keys ans it's sales details
Vendor Key Vendor Sales outstanding
#MULTIVALUE V1 1000 2000
How to resolve this issue? tried unchecking 'Avoid Duplicate Row Aggregation' but it doesn't serve the purpose.
Thanks in advance.
---Veera

Hi Veera,
Please check the below links
Re: WebI on top of BW
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/80fe4156-743f-2b10-15a9-e96f47dbab16?quicklink=index&overridelayout=true
Thanks

SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field

Hi,
I am using Access 2013 and I have the following VBA code,
strSQL = "INSERT INTO Master SELECT * from Master WHERE ID = 1"
DoCmd.RunSQL (strSQL)
when the SQL statement is run, I got this error.
SELECT * cannot be used in an INSERT INTO query when the source or destination table contains a multivalued field
Any suggestion on how to get around this?
Please advice and your help would be greatly appreciated!

Rather than modelling the many-to-many relationship type by means of a multi-valued field, do so by the conventional means of modelling the relationship type by a table which resolves it into two one-to-many relationship types. You give no indication
of what is being modelled here, so let's assume a generic model where there is a many-to-many relationship type between Masters and Slaves, for which you'd have the following tables:
Masters
....MasterID (PK)
....Master
Slaves
....SlaveID (PK)
....Slave
and to model the relationship type:
SlaveMastership
....SlaveID (FK)
....MasterID (FK)
The primary key of the last is a composite one of the two foreign keys SlaveID and MasterID.
You appear to be trying to insert duplicates of a subset of rows from the same table. With the above structure, to do this you would firstly have to insert rows into the referenced table Masters for all columns bar the key, which, presuming this to be
an autonumber column, would be assigned new values automatically. To map these new rows to the same rows in Slaves as the original subset you would then need to insert rows into SlaveMastership with the same SlaveID values as those in Slaves referenced
by those rows in Slavemastership which referenced the keys of the original subset of rows from Masters, and the MasterID values of the rows inserted in the first insert operation. This would require joins to be made between the original and the new subsets
of rows in two instances of Masters on other columns which constitute a candidate key of Masters, so that the rows from SlaveMastership can be identified.
You'll find examples of these sort of insert operations in DecomposerDemo.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
In this little demo file non-normalized data from Excel is decomposed into a set of normalized tables. Unlike your situation this does not involve duplication of rows into the same table, but the methodology for the insertion of rows into a table which
models a many-to-many relationship type is broadly the same.
The fact that you have this requirement to duplicate a subset of rows into the same table, however, does make me wonder about the validity of the underlying logical model. I think it would help us if you could describe in detail just what in real world
terms is being modelled by this table, and the purpose of the insert operation which you are attempting.
Ken Sheridan, Stafford, England

#MULTIVALUE error in SAP BI 4.1 SP3 WebI report after upgrade

Facing issues after upgrading from BO 3.1 SP3 to SAP BI 4.1 SP3.Below are the details:
1.The WebI report is created with 2 data providers. The report tab has a vertical table with 2 dimensions and 3 measures.
2.In the report layout the objects displayed is coming from base dimension and not merged dimension.
3.The data in some of the rows displays as #MULTIVALUE and some of them display the value.
4.The report also have Sub totals and no breaks.
Based on point no 3, not able to verify whether the subtotals are been calculated correctly. Please share your inputs,suggestions or solutions to resolve this issue.
Thanks in advance.

Hi,
Do you have the Associated object on layout?. Drag and drop in a column and if you dont want to display hide it.
Also , did you check the Extended Merged dimension option in properties?.
Thanks,
Jothi

What is multivalue error

Post Author: chnagaraju
CA Forum: Deployment
while creating a report now and then i am getting multivalue error.what is that? and how can i resolve that one.

Post Author: indrasol
CA Forum: Deployment
#MULTIVALUE error occures when you try to place a formula or Column that returns more than one value in a cell that outputs only one value.
I hope this will answer your question

#MULTIVALUE error in WEBI crosstab

Hello Experts,
I am using cross tab in a webi report and I get multivalue error in WEBI
When I select the table property "Avoid Duplicate row aggregation", I get the below result
As you can see, that in the first image, the Actual cost is calculated correctly, but the Quantity, is anot able to add up and gives multivalue error.
Please help resolve.
Thanks
Shilpa

Hi Shilpa,
You can use any context In or Foreach.
Ex. =Sum(<Revenue>) In <Year>
=Sum(<Revenue> In (<Region>,<City>,<Year>) In <Year>)
Use contexts with Aggregation functions like Sum, Count, Min, Max etc.
For better understanding of Calculation Context you can go through following document :
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_ffc_en.pdf
- Smart measures are the ones which have projection aggregate set as "Database Delegated" which in turn results measure to be calculated by the database itself.
To create a Smart measures you can use calculated key figure or restricted key figure.
In IDT we can achive it by applying projection for measure object.
Hope this will help....!!!
Regards,
Veer S.

#MULTIVALUE error in some cells only

I am getting #MULTIVALUE error in few cells in a cross-tab report whereas the rest of the cells show correct results. What can be the reason for this.
My cross tab report consists of : Physician(Dimension) as a Section, Metrics(dimension) in the rows and Month(dimension) as columns.
The body contains measures- Rate and Scale. Each Metric has got a defined scale of 0-4 based upon a range of the Rate.
Scale ia a variable created by me as =[Rating Scale] In ([Provider] Where([Rate] Between([Lower Target Pct];[Upper Target Pct]))
The report looks like:
                    Jan                   Feb                          Mar
              Rate Scale
Metric1
Metric2
When i try to include the Rate of YTD, the data in the Rate shows correct results wheares the Scale certain cells are appropriate but rest of them throughs #MULTIVALUE error.
I am not able to comprehend whats going wrong in here.
Can anyone pls resolve this issue.

Actually , there is no formula for Scale. Its in-built dimension but to get the correct result in the cross-tab( No irregularities are found for teh results in the horizontal and the vertical report format), I created the variable for scale as follows:
=Scale ForEach(Provider) Where(Rate Between Lower Target AND Upper Target). After using this variable, I got correct results for the monthly/quarterly data wheareas for the YTD it gives #MULTIVLAUE for few cells, where the scale is different for the every months./quarters. It gives correct result where the rate falls in teh same scale zone for all the months/quarters for a certain Metric.
For .Ex.
Metric                   Q1                           Q2                  Q3                      YTD
                     Rate     Scale
Tetanus        94         3                     92     3                91 3                 93       3
BRC              71        2                      91      3               98    4               83       #MULTIVALUE
I am not able to fathom that why its not taking the YTD into consideration even though I created a different variable for the scale of YTD in which I used the YTD(rate) instead of the actual(Rate).

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

Multivalued fields in Access 2010

I thought that it would be a good idea to use the multivalued field in an application for users to use since they just click the little boxes and the item is placed in the field. For the most part it works straight forward, except for one problem.
There is huge difference between the stored values and displayed ones. I am trying to perform this task now: If the list is established for a group of people, I would love to be able to copy all of a multivalued field into a blank field programatically,
saving the user the time to rebuild the list for every single person. So far, I have found almost every inconceivable means of not being able to do it. At this point I could use some advice. Thank you for experience and your help.
RKS

Unless you have a real need to use a multi-valued field, i.e. your database is interfacing with SharePoint in the very limited context in which such a field is necessary, don't do so. Instead model the many-to-many relationship type in the conventional
way by a third table which resolves it into two one-to-many relationship types.
You'll find an example of this sort of basic many-to-many relationship type as StudentCourses.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
This little demo file illustrates various ways of interfacing with e data, but I'd strongly recommend the use of a conventional form/subform. In this add a new student named June Magenta say, but don't select any courses for her in the subform.
Now move back to Joanna Black's record and with the form still open execute the following query:
INSERT INTO StudentCourses(StudentID, CourseID)
SELECT S2.StudentID, StudentCourses.CourseID
FROM Students AS S1 INNER JOIN StudentCourses
ON S1.StudentID = StudentCourses.StudentID, Students As S2
WHERE S1.FirstName = Forms!frmStudents_3!FirstName
AND S1.LastName = Forms!frmStudents_3!LastName
AND S2.FirstName = "June" AND S2.Lastname = "Magenta";
After executing the query move back to June Magenta's record and you'll fund that Joanna Black's courses have also been assigned to June Magenta. In this example it assigns the courses to only one student, but you could easily do so for multiple students
by amending the final line of the query so that the restriction was on the basis which returned multiple students from the S2 instance of the Students table.
Ken Sheridan, Stafford, England

Reading multivalued attribute

Hi,
I have a multivalued attribute defined in LDAP and was synchronized to plumtree. After synchroinzation, the attribute with multiple values came in to plumtree and I am able to see the values of the attribute by clicking on user profile. But when I try to read the attribute using the following query only the last value is coming up.
Here is the query I am using.
IPortletContext portletContext = PortletContextFactory.createPortletContext(request, response);IPortletRequest portletRequest = portletContext.getRequest(); out.write("locationString = " + portletRequest.getSettingValue(SettingType.UserInfo,"ttcmytlocation"));
In the profile of the user ttcmytlocation attribute has multiple values, but reading returns only the last value. Is there any other way to query the values? Please help!!
Thanks.

Use LDAP is ticked but no server specified
Tried Selecting the server but no effect
Every where I look in POA, Domain setting its set to the SERVER's IP address
not DNS name!!
Copied NAMED.NLM (just the NLM) from SP5 server - error gone but still get
the LDAP error 81 when a
user tries to login to GW.
I also POA > Security - I tried setting security to LOW (which unticks LDAP)
but still can't login
"Anders Gustafsson" <[email protected]> wrote in message
news:[email protected]..
> Eric,
>> "Starting eDirectory integrated Novell DNS Server...
>> error:NWDSRead Failed while reading a multivalued attribute: -603
>> Loading the configuration and zone data completed .
>> DNS Server running "
>>
> OK. I assume that you have configured your POA to use the same server for
> LDAP. If so, did you use the DNS name or IP address? If DNS name, I
> suggest you try IP address as this takes DNS out of the picture.
>
> The error you are seeing indicates that you are not current on servicer
> packs:
> http://www.novell.com/support/search...200%2043955231
>
> I suggest you apply SP6 plus the post SP6 fixes after resolving your POA
> issue and reading this:
> http://wiki.novell.com/index.php/Nw65sp6
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2600
>

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

Welcome to the Apple community.
Does anyone have suggestions?
Trash the spyware (Chrome) and use Safari.

SSRS with DAX - parameters multivalue vs total element

Hi all,
I'm using SSRS on top of a SSAS tabular model to create intuitive dashboards for management department.
One thing I'm struggling with is the lack of a "total" on parameters. What I'm doing is, based on the fact table, I create the datasets that will feed each parameter, so it only has the dimension members available on the fact table. That is fine
performance wise, you only have 1 element and it renders very quickly.
For a management perspective at a higher level it is important to view the totals to have the big picture of the information. In my project we are in a University, so I have the parameters Year, school (there are several schools in the university campus)
and the course (computer sciences, math, statistics, etc).
At first glance, if I'm a course coordinador I want to pick my course and have a global view, and I'm achiveing that, but imagine now, that I am the school coordinator, or the university coordenator.
I want to see the aggregate values by all courses or by all schools.
In my view I have 2 ways to do this and I come from a tradition cubes background:
1 - I would use the all element the cubes hierarchy have on each attribute
2 - I would use multivalue parameters with StrToSet (worse performance)
Using DAX what is your approach?
Best regards

Hi AsifMehmood,
Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query, right?
For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
to get all the values from the fields which will add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
Step by Steps information in below thread for your reference to create the parameters and the custom code:
"How to get distinct values of sharepoint column using SSRS"
Other similar thread for your reference:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
If your problem still exists, please feel free to ask and also try to provide us more details information.
Regards
Vicky Liu

Resolve #multivalue

Similar Messages

Maybe you are looking for