Resorting of components and display on WWI report

Hi,
we would like to display the ingredients of a compostion on a WWI report. We have implemented a user exit GEN_POSRG to change the sorting order of the ingredient before the output. The ingredients need to be displayed as a flow text separated by comma. Unfortunately the combination of both cases does not seem to be that easy. I tried to use two POS repeating groups (S:POS;1) and comma (S:POS;2-) to show the first ingredient and then in a loop all other ingredients with a preceeding comma. When attaching the user exit to both POS groups the first POS group wil lonly get the first ingredient instead of all. So the sorting does no work.
Any idea on how to solve this?
Regards, Michael

Hello Michael,
it might be possible to use a stack. Say you want to sort the ingredients based on their content, the component with the highest content in the mixture should come first. Try:
Initialize stack:
<11BRG001(M,SAP_EHS_1012_004;)><11BRG002(S:POS;)>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_NEW)[D:Value]>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_PUSH)[D:Value]>
Sort stack in descending order:
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_SORT_DESC)[D:Value]>
<11ERG002><11ERG001>
If stack is not empty:
<13BNG005(*:01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP))>
Print highest value:
<11BRG006(M,SAP_EHS_1012_004;*)>
<11BRG007(S:POS;1)>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP)>
<11ERG007>
Print all other values:
<11BRG008(S:POS;2-*)>
, <01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP)>
<11ERG008><11ERG006><13ENG005>
I haven't tested this code but it should work. Please note that the stack may in your system not be in name space C14N but rather in /TDAG/CS104 or ZISI104. You need to check this.
Good Luck,
Ralph
Edited by: Ralph Paczkowski on Mar 2, 2012 1:12 PM

Similar Messages

Server and Presentation Variables and Displaying in Dashboard Report

Hello I am running into dead ends trying to get what seems a simple request implemented. The user would like to be prompted for a Date range and have the dates they select displayed in the Title of the report, they also would like the default data set returned be the prior month (so not all data is returned when they initially run the Dashboard)
I have a Dashboard prompt where the user is prompted for a Date Range (Date column). My first issue was being able to display the Date range in the title. I used the below post from Venkash
http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/
I set the Case statements in the Dashboard prompt to equal then passed them to a Presentation variable. I then used these to be displayed in the Title of my Answers report.
The issue now is automating prior month, I was informed I would have to set up a Repository Variables to initialize two columns - one bringing in Prior Month First Day and one bringing in Prior Month Last Day. I then set these as the defaults in the Dashboard Prompt.
This works, however, my problem now is when the values are displayed in the report initially, they have the value of TimeStamp '01-01-2008 00:00:00'. When I put in values in the Dashboard Prompt and hit go the values are replaced correctly with whatever I put in - 1/1/2008.
I assume the TimeStamp shows because of the initialization I am doing in the repository, I don't see any way of changing this so it reflects just the date, I am using the sysdate in the formula on the repository - I tried converting to_char first setting the format then converting back to Date. But still no luck.
Has anyone else encountered this? Or am I even going about it the wrong way? Sorry for the long post, I look forward to any input, thanks!!!

No it errors out when I try to Cast the server variable as a Date in the Dashboard Prompt interface.
The variable I created in the repository (Server/Dynamic) has the formula:
SELECT Add_Months(TO_DATE((to_char(sysdate,'mm')) || '/' || '01/' || to_char(sysdate,'YYYY'),'MM/DD/YYYY'),-5) from dual
This is set up with an Initialization block that when I first run the report it displays in the title
TIMESTAMP '2007-10-01 00:00:00'
This will display no matter what I change the Initialization block to (01, ab, etc) so I guess it is something from the formula.
Now when a user does enter a value into the prompt box and hits GO the title changes to reflect a date and looks great (10/1/2007), but I guess this is because it is now passing the database column value to this presentation variable.
I assume this all revolves around the formula I am creating in the repository to return a default of 10/1/2007 so it can be displayed in the report header like that and not with the TimeStamp format above.
I appreciate all your input, thanks again!

Different display on client report builder and web reports

Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
My HPUX is 11x,and display the Chinese report .
Any body know why ?give me some advice ,thank u very much.

Hi
If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
Thanks
Rohit

Extract Archival data and display in report

Hi All,
I prepared a report to display the details of GL accounts with vendor details.
i need to extract archived documents also and display in my report.
Kindly let me know how to extract the archived FI documents.
Regards,
Saravana

Hi..this is really habit of doing R and D.
Generally, we do archive the fi documents using the archiving object FI_DOCUMNT in the transaction SARE which archives all the tables related to FI application area.
Also, we do generally view the archived fi documents in the transaction SARE ..just you need to pass the object name as FI_DOCUMNT and the info structures if active.
We do also have the read program to extract the all the archive fi documents...please check this program: RFBELJ00
you can develop your own program as per the above standard one. But do you think, it is neccessary???
Please let me know if you need any inputs from me..!
Please rewards points if sounds helpful/useful.
Regards,
Shamim

Can i pass plsql table as parameter in a report and display the values

Hi.I have a form with five text items.
Also inside the form I have a button and when I push the button the trigger fires(WHEN BUTTON PRESSED) and the values of the form passed and display in the report.Is it possible to have in the form a detail for example with three rows and three columns and with some way(mayby as plsql table) pass all the parameters from the form to report and then display in the report?I asume the report is a tabular report.
Thanks in advance Panagiotis.

Hi Nigel,
By default, SharePoint will display folder icon for document sets in the search results.
If you need to change this icon in search results, then you can modify the display template for document sets.
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/04/understand-how-search-results-are-displayed-in-sharepoint-server-2013.aspx
How did you set query in the Result Source?
I tested the query below in the result source in my environment, and it worked fine.
{searchTerms}ContentTypeID:0x0120D520*
I recommend to check if the document sets have been crawled in crawl log.
If not, please run a full crawl in Search Service Application and then check the results.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Dynamically fetch data from database and display it in the report

Hi,
We have a requirement in developing a report which needs us to dynamically fetch data from the database and display it in the report.
We have a column called WORKER in the report.
For each worker there is a measure(PSA) associated with it.
In the report we have to display both the WORKER and the PSA column.
What we want is, when we display the list of the workers, the corresponding workerid_id of the worker will be passed and the value of his PSA will be fetched from the database and displayed in the report.
Or anything similar to this.
We also have drill applied on this WORKER column. So after any drill up or drill down also the value for PSA should change.
Is there any way of doing this?
Please help if possible.
Thanks,

hi,
data : count type i value 0.
data : Begin of itab occurs 0 ,
plan_version like hrhap-plan_version,
APPRAISAL_ID like hrhap-APPRAISAL_ID,
AP_START_DATE like hrhap-AP_START_DATE,
AP_END_DATE like hrhap-AP_END_DATE,
AP_STATUS like hrhap-AP_STATUS,
AP_STATUS_SUB like hrhap-AP_STATUS_SUB,
OBJ_DATE_SET like hrhap-OBJ_DATE_SET,
REVIEW_DATE_SET like hrhap-REVIEW_DATE_SET,
AP_DATE_SET like hrhap-AP_DATE_SET,
AP_DATE_EARLIEST like hrhap-AP_DATE_EARLIEST,
AP_DATE_LATEST like hrhap-AP_DATE_LATEST,
CHANGE_DATE like hrhap-CHANGE_DATE,
CHANGE_TIME like hrhap-CHANGE_TIME,
CHANGE_USER like hrhap-CHANGE_USER,
end of itab.
select * from hrhap into corresponding fields of table itab.
loop at itab.
write :/ itab-plan_version under 'plan_version',
itab-appraisal_id under 'Appraisal Id',
itab-AP_START_DATE under 'Start Date',
itab-AP_END_DATE under 'End date',
itab-AP_STATUS under 'Status',
itab-AP_STATUS_SUB under 'Substatus',
itab-OBJ_DATE_SET under 'Objective setting date',
itab-REVIEW_DATE_SET under 'Review date set',
itab-AP_DATE_SET under 'appraisal date',
itab-AP_DATE_EARLIEST under 'Earliest appraisal date',
itab-AP_DATE_LATEST under 'Latest Appraisal date',
itab-CHANGE_DATE under 'Change Date',
itab-CHANGE_TIME under 'change time',
itab-CHANGE_user under 'change user'.
count = count + 1.
endloop.
write : 'No of records' ,count.
rgds
anver
if hlped mark points.

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

ALV - need to sum values of internal table and display in ALV

I have data in internal table as:
Material date sum1 sum2
Mat_A 19990101 4 4
Mat_A 20080501 3 0
Mat_A 20080601 2 0
Mat_B 19990101 2 0
Mat_B 20080601 5 5
Required output is :
Material qty1 qty2 19990101 20080501 20080601
Mat_A 432 4 4 3 2
Mat_B 2+5 5 2 5
Thinking of using ALV to pass the internal table and display as classical report (and also to save as excel spreadsheet).
Counting your help on the following questions:
1) How to accomplish the sum in ALV report? Can ALV FM do that or one has to use ABAP to compute the sum from the given internal table?
2) Mat_A can have more date values. Here it got 3 distinct date values 19990101, 20080601, 20080501. If it has say 5 date values, how to create the ALV date columns (from 3 to 5 date columns) dynamically?
Thanks for the help.

for the sum inalv we use generally..
it_fieldcat-do_sum = 1.
check this examples...
http://www.****************/Tutorials/ALV/Subtotals/text.htm
*& Report ZTEST_ALV_PERC_13317
REPORT ztest_alv_perc_13317.
TYPE-POOLS: slis.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
 wa_fieldcat TYPE slis_fieldcat_alv,
 it_events TYPE slis_t_event,
 wa_events TYPE slis_alv_event,
 it_sort TYPE slis_t_sortinfo_alv,
 wa_sort TYPE slis_sortinfo_alv,
 l_layout TYPE slis_layout_alv.
TYPES: BEGIN OF ty_itab,
 field1(10),
 qty1 TYPE i,
 qty2 TYPE i,
 qty3 TYPE i,
 dummy TYPE c,
 END OF ty_itab.
DATA: itab TYPE STANDARD TABLE OF ty_itab WITH HEADER LINE,
itab1 TYPE ty_itab.
START-OF-SELECTION.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
itab-field1 = 'FIRST'.
itab-qty1 = 2.
itab-qty2 = 1.
itab-qty3 = 5.
itab-dummy = 10.
APPEND itab.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-tabname = 'ITAB'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 2.
wa_fieldcat-fieldname = 'QTY1'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 3.
wa_fieldcat-fieldname = 'QTY2'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 4.
wa_fieldcat-fieldname = 'QTY3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-col_pos = 5.
wa_fieldcat-fieldname = 'DUMMY'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-do_sum = 'X'.
wa_fieldcat-no_out = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
 CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = it_events
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 it_fieldcat = it_fieldcat
 TABLES
 t_outtab = itab
EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
ENDIF.

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

What is the difference between list display and grid display in alv report

Hai genious
i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me what is the main difference between list display and grid display in alv report
thanks&regards
chinnu

Hi ,
1. For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
I hope it helps.
Regards,
Mamta
Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

Image not displaying in pdf report using XSL-FO and using Oracle 11g databa

Good Afternoon,
I have created over 15 reports using XSL-fo, with the following syntax to display an image on the pdf:
fo:block margin-left="0.24cm" margin-right="0.27cm" margin-top="0.0cm" ><fo:external-graphic content-width="scale-to-fit" content-height="scale-to-fit" width="1.73cm" height="1.57cm" >
<xsl:attribute name="src">'url("http://readiness:7780/i/marforcom_symbol_rpts.gif")'</xsl:attribute></fo:external-graphic>
</fo:block>
This syntax works fine when using Oracle 10g, now my database has been upgraded to 11g and my image no longer displays in the reports. I have already upload the image into the database as a workspace image.
I have tried to point the image @ the image by using url(#WORKSPACE_IMAGE#marforcom_symbol_rpts.gif)
or <img src ="#IMAGE_PREFIX#marforcom_symbol_rpts.gif")
and it still doesn't work.
I have searched this forum trying to come up with a solution that will fix my problem and am unable to.
Current config: Oracle 11g, using pl/sql gateway.
I need to know how to point the xsl-fo file to the database, where the image now resides.
Thanks,
Mary
Edited by: MaryM on Jul 25, 2012 3:15 PM
Edited by: MaryM on Jul 25, 2012 3:51 PM

Hi,
I think you need load images to database XDB virtual directory /i/ and then use #IMAGE_PREFIX# substitution.
This might help to access /i/
http://www.apex-blog.com/oracle-apex/accessing-i-using-ftp-170.html
Or use this to load images
http://oracleinsights.blogspot.fi/2012/05/loading-images-into-oracle-xdb.html
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Capturing and displaying user input in Crystal Reports

Hi all,
Iu2019m creating a crystal report with SAP as data-source and want to capture user input and display it on the report. I have defined parameters to capture the input and added them to the report header. I have then created formula fields to capture user input using the JOIN statement to accommodate multiple values. Everything works well when users enter values for all the parameters, but when they leave some blank I get an error message u201CParameter value is nullu201D.
Has anyone encountered this type of problem; Anyone knows how to resolve this?

Hi
In parameter window make the Optional prompt to True. And change make change in your record selection formula like this :
(not HasValue({?PrjMgr@SELECT Firstname,lastname FROM OHEM}) OR
ISNULL({?PrjMgr@SELECT Firstname,lastname FROM OHEM}) OR
({?PrjMgr@SELECT Firstname,lastname FROM OHEM} = '') OR
{OHEM.firstName} = {?PrjMgr@SELECT Firstname,lastname FROM OHEM})
Regards

How to upload images in to custom table and display them in normal ABAP report?

Hi Experts,
Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
Thanks in Advance,
Rgds,
Anusha

Hi Experts,
Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
Thanks in Advance,
Rgds,
Anusha

Insert and display images in a report

Hi ABAPers, I need to insert and display an image (bitmap format) in a standard ABAP report. With the consideration that the image (an employee photograph) could vary depending on the employee numer the user enter as an input parameter for the report. Any ideas of how can I do it? Help will be appreciated. Thanks in advance.
Regards.
Sebastian.

No you cant do it as Vashmi already said so , you can upload the pictures in ALV, but in your requirement I must say you should see the OSS note # 353949
FYI
Symptom
In the following note you will find some of the most frequently asked questions and their answers. Most answers are release independent, but some are valid for release 4.6 only.
Other terms
Questions, picture in header, profile, FAQ
Solution
[1] Question: Is it possible to configure the profile e.g. for a person?
[2] Question: How can I bring a picture of the person into the profile header?
[1] Question: Is it possible to configure the profile e.g. for a person?
Answer: It is possible to add or delete sub-profiles. You can do this in the customizing (transaction OOPF). There you can deactivate sub-profiles for an object type. Or add a new existing sub-profile.
[2] Question: How can I bring a picture of the person into the profile header?
Answer:
You should have an employees picture with format JPG or BMP...
Start transaction OAAD to add the picture to SAP ArchiveLink. Press the Create-Button there. You have to type in PREL for the Business object and HRICOLFOTO for the Document type. Then press create. On the popup you must maintain the wished Personnel number for that the picture should be valid. Then press 'Continue'. Choose the picture and continue.
For the screen header 00 (if it isn't changed) you should see the picture in the profile.
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!"

Resorting of components and display on WWI report

Similar Messages

Maybe you are looking for