Resource Gantt Chart - Error : Resourse with same ID "%1" already exists
Hi,
I have a requirement to have multiple periods per resource.
I have implemented the example in http://apex.oracle.com/pls/apex/f?p=36648:60. It seems only to cater for a single period.
The COLUMN_NAME ID in my query is not unique.
The following error in the chart is displayed:
Category: 1000
Error code: 1002
Message: Resourse with same ID "%1" already exists
Somewhere I'm missing something, and might be the late nights - Can you please advise?
Kind Regards
Mynhardt
Hello Roel -
Thank you for the suggestion. After setting parent_id to null, it still doesn't load. By using debug I'm getting a invald character to number conversion. Paring down the query to just basics, it still won't pass query validation:
select null link, null
a.WS_ENGINEER, number
a.ws_engineer name, number
null parent_id, null
a.ws_start_date start_date, timestamp with timezone
a.ws_end_date end_date timestamp with timezone
from WORK_SCHEDULE a
I have to think it's the timestamps with timezone that are causing the problems since all other data is only numeric. I'll keep after it.
Similar Messages
-
Steps to create Resource gantt chart with hourly ranges
Does anyone have an example of how to customize the default built APEX/Anychart resource gantt charts to handle a 12 hour range showing resources? I have tried going through a sample provided by anychart tech support, but the xml file seems to have different set of entries.
What I have is a set of rows for resources in a shop over a 12 hr shift that I need to show. I have a standard resource gannt working, but I need to customize some of the xml settings to see the date/time ranges..
Any help would be a blessing!!
Thank you,
Tony Miller
Webster, TXI could post it up on Oracle's hosted site, but I am NOT seeing much help where ever it is located.. I also believe in helping up here because I can and It helps me....
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned.. -
Setting Custom XML = Yes in resource gantt chart removes start & end dates
I'm having a strange issue with a Resource Gantt chart in Apex 4.0.2.
I built the chart using the Wizard and changed nothing from the defaults. Everything looks/acts fine on the chart when Use Custom XML = No. But I wanted to change a couple things like cell alignment and width, so I set this to Yes and modified the column attributes in the XML code. After doing so, when running the report, the values for Start Date and End Date are not showing. This is happening in both the datagrid and the tooltips, but the timeline is still showing the right information (ie a bar from start to end), so I know it still knows what the correct start and end dates are.
Thinking I accidentally messed something up, I deleted the chart and recreated it (again, from the wizard). This time, I went back and only set Use Custom XML = Yes but did not change anything within the XML code itself. To my surprise, the dates were still missing. If I set it back to No then they reappear.
Has anyone seen this before and/or know a way to fix it?
Thanks,
~ JohnHej John,
APEX itself is using a field substitution "&DATE_FORMAT." to insert the date format into the XML file. This field substituion is used in may location in the default XML. APEX standard action is to substitute it with the value specified in the Gantt Setting "Date Format". This substitution takes place many places in the default XML file.
Enabling custum XLM also means disabling APEX XML handling, the substitution does not take place, the "&DATE_FORMAT." contains in this case a null value.
The default XML file, which can be viewed in apex developer mode, looks like:
Start Date: {%ActualStart}{dateTimeFormat:&DATE_FORMAT.}
The runtime XML, which can be viewed in debug mode, contains something like:
Start Date: {2011.07.21 00:00:00}{dateTimeFormat:}
...a null value is not a valid AnaGantt date format.
Two solutions:
a) insert a correct AnyGannt date formatter in the custom XML like
Start Date: {%ActualStart}{dateTimeFormat%YYYY.%MM.%dd %HH:%mm:%SS}
or
b) create a field DATE_FORMAT on page containg the chart and intialize it with the AnyGantt date formatter like %YYYY.%MM.%dd %HH:%mm:%SS".
When running the page the substitution will take place usually.
Regards,
Benny -
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestionsThis is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
ditto [-v] [-V] [-X] [<options>] src ... dst_directory
ditto [-v] [-V] [<options>] src_file dst_file
ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
ditto -h | --help -
Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
HelenHi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat -
I have upgraded to PSE13 and want to unistall PSE9. When I try to do this all I get is an error message, "Error 1316. The specified account already exists". Then the uninstaller rolls back and I am left with a partially uninstalled version that is unusable. I tried to reinstall the software from the original PSE9 disk but all it tries to do is uninstall the version already on my computer, and this then does the same thing as noted above. How do I completely uninstall PSE9?
See here:
How do I remove older versions of Photoshop? -
Subversion - a repository connection with the supplied URL already exists
Hi all!
OS: SuSe 9.3
jdeveloper:jdevstudiobase10131
I need to create three repository connection to the same URL, with different user but jdeveloper doesn't give me any chance to do it. Returning the following error:
Could Not Create Connection
A repository connection with the supplied URL already exists.
Any idea here?
Thanks
Gilberto
Message was edited by:
gilbertocaYou might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit -
SPD 2010 - How to know if a file with a given name already exists in a document library
Hi,
I've created a workflow using SPD. One of the steps in there is changing the name of the document to a clean name. This workflow fails if a document with this same name already exists in my document library. Is there a way to check in a SPD workflow if
a document with a given name already exists in my document library ?
Marc NemegeerHi,
According to your post, my understanding is that you wanted to know if a file with a given name already exists in a document library.
You can use a SharePoint Designer workflow to achive it.
To test to see if a document exists, you need to use condition:
If Current List:Name equals [%Current Item:Title%].docx
Here is a similar thread for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/cc227020-ce81-4c08-aee0-a66789d8ad05/test-to-see-if-document-exists?forum=sharepointcustomizationprev
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li -
WDA Error : An instance of popup view already exists in the application
Dear Experts,
I have used a popup in my WDA application which gets opened on the click of the button. Whenever the application is launched for the first time and when I click on the button to display the pop up I get the error "An instance of popup view already exists in the application"; when I close the application, relaunch it once again and click on the button to open the popup, it works fine. What would be the reason for this behaviour?
My piece of code is as follows,
try.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
CATCH CX_WDR_RT_EXCEPTION.
ENDTRY.
Kindly please help to resolve the issue.
Warm Regards,
KanthimathiHi Viji,
I now changed my piece of code as follows,
if lo_window is initial.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
MODAL = ABAP_FALSE
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
CLOSE_BUTTON =
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
endif.
but still facing the same problem. By the way what does the message type argument mean here?
Regards,
Kanthimathi -
The operation could not be completed because an item with the name xyz already exists
I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities -
File Error: A file of this name already exists
im using Final Cut Pro 5.1.4 and whenever I tried to export a sequence using compressor, I get that error message "File Error: A file of this name already exists". I tried reinstalling the program, nothing. What can I do to fix that?
Sounds like you already have a file by that name located in the place you want to export to. Try changing the name of your new file.
b -
Error create license adminstration menu: Menu - Already exists [66000-88]
Hi Experts,
Customer has a minor problem - when loading SAP, the error message...
Error create license adminstration menu: Menu - Already exists [66000-88]
.. appears at the bottom of the screen. What is causing this message?
Thanks
GreigHi Greig ,
You might need to upgrade your patch level . Here is the reason why you might have that issue
MenuItem: Menu - Already exists / Not found
Symptom
When adding many menu items you may randomly come across the following error messages:
"Menu - Already exists [66000-68]"
"Menu - Not found [66000-27]"
This may happen even if the UniqueID being used has previously been removed using RemoveEx(). This issue may occur in SAP Business One 2007 A PL30 through to PL44.
Other terms
error, menu - already exists, menu - not found, menu, already exists, not found, sub-menu, menuitem, remove, removeex, add, sap business one, ui, ui api, sdk
Solution
This issue does not occur as of SAP Business One 2007 A PL45. -
Resource Gantt Chart with Multiple Series (Apex 4.1.1)
Hi,
I am building a resource gantt and I want to show different types of entry in different colours.
My series query is:
select null,
time_record_id,
username,
null,
to_timestamp(to_char(event_date + (start_time/24),'YYYY-MM-DD HH24:MI'),'YYYY-MM-DD HH24:MI') start_date,
to_timestamp(to_char(event_date + (end_time /24),'YYYY-MM-DD HH24:MI'),'YYYY-MM-DD HH24:MI') end_date
from
oly_time_record
where
work_code = 'OFFICE'
order by 5, 3;which works well to show me the times when a user is going to be in the OFFICE.
I now want to add additional bars to the chart that shows me the times that a user is going to be 'WORKFROMHOME'.
The 'OFFICE' time should show Green bars and the 'WORKFROMHOME' should show Red Bars.
This is quite easy on normal charts, where you can add extra series but the Resource Gantt does not seem to allow more than one series.
Does anyone have any ideas about how I can get what I need?
Thanks,
MartinHi Martin,
there are a lot of examples of gantt charts in this forum.
Take a look here:
http://apex.oracle.com/pls/apex/f?p=36648:60
Markus
Maybe you are looking for
-
Graphics card memory NVIDIA GeForce 8600M GT with 512MB vs. 256MB
how much difference will i see between the NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory, and the NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory?? i will be doing HD editing on FCP. any input is appreciated!! e
-
Azure API and tokens issued by azure AD
anyone know of a sample that showcases the azure API management/delivery feature consuming (access) tokens issued by Azure AD? is there a reasons why its not even a sensible thing to conceive? (it seems obvious...but perhaps I have a disconnect somew
-
ADOBE PHOTOSHOP CC 14.1
Hi, I have Adobe photoshop cc 14.1 and how I can do installion repair ?
-
Open a document, image size and script alert window pop up
Everytime I open a document in Photoshop CS5, these 2 dialog boxes (Image Size, Script Alert) would pop up. I would need to cancel 2 times to start editing. Is there a setting I can disable this? Thanks,
-
How can I fix my disabled iPhone 4?
How can I fix my disabled iPhone 4?