Restore/aggregate all databases
Hi everyone,
I'm in the middle of restoring a Planning application and I've loaded the data for all Plan Types using Essbase Administration Console. How do I aggregate all the databases now? I still have some .rul and .csc files from the application backup and I'm not sure how I should use them.
I mean, is there anything else I should do in EAS before moving on to importing Calculation Manager Rules?
Thank you!
How do I aggregate all the databases now? I still have some .rul and .csc files from the application backup and I'm not sure how I should use them.^^^ I take it that you didn't write these yourself. Have you looked at the code in the calc scripts? (That's the .csc files). Do you (and I'm not trying to be condescending) understand the BSO calc script language? If not, tread carefully. At least if it all blows up you can revert to your backup. Maybe Calc Manager has a Calc All? I'll bet that there's something to that effect in your calc scripts.
Lastly, I'm also guessing you don't have any documentation to go with this. Hopefully you're not one of my old clients... Someone fell down on the job on that one.
You can likely use the Default Calc on all of the databases, but there may be more optimized calculations available in the calc scripts or in Calc Manager itself. I would at least take a look there first.
Regards,
Cameron Lackpour
Similar Messages
-
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
RMAN restore from active database, ASM
I'm attempting to refresh a stage database from a prod database using RMAN restore from active database. Both are on ASM. After working through various hurdles, I've got one issue I'm a bit stuck on. I've got a handful of data files that do NOT have OMF names (ie MSTRDATA/mstrmdpd/datafile/gsa_indx instead of MSTRDATA/mstrmdpd/datafile/gsa_indx.351.714779777) and these are failing when I do the restore. The syntax I'm using in RMAN is as follows:
duplicate target database to dwstage
from active database
spfile parameter_value_convert 'dwprod','dwstage'
SET DB_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE'
SET LOG_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE';
The error message I'm getting is this:
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/21/2011 13:26:24
ORA-17628: Oracle error 19505 returned by remote Oracle server
continuing other job steps, job failed will not be re-run
Normally from what I've seen/read this error can be traced back to needing to pre-create the directories for the controlfiles etc, but since 90% of the datafiles copied correctly...
Any suggestions as to a way around this, or am I going to be forced to restore from a backupset?This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again -
RESTORE ARCHIVELOG ALL VALIDATE; - returns log file names
Environment:
Oracle 11.2.0.3 EE on Solaris 10.5
RMAN using control file as repository.
My archive logs are going to /arch/<SID>. During a time of unforeseen high activity the directory was filling up and some of the files had to be move to a different mount point. I have since done several Level 0 incremental backups including (plus) archivelogs.
My RMAN archivelog deletion setting is: CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 1 TIMES TO DISK;
I have since begun to run more frequent archive log backups to keep the mount point cleaner.
Since I have several successful Level 0 backups including archivelogs, I manually deleted the archived logs on the secondary mount point.
I registered the logs in the secondary mount point using REGISTER ARCHIVELOG START IN '/xxxx';
I then ran a CROSSCHECK ARCHIVELOG ALL; to update the control file repository.
When I query the V$ARCHIVED_LOG view I see many entries for my deleted log files with a STATUS = 'X' (Expired) and a BACKUP_COUNT = 0.
I ran DELETE EXPIRED ARCHIVELOG ALL;
Now when I query the V$ARCHIVED_LOG view I see many entries with blank name column for the SEQUENCE# in my list and with a STATUS = 'D' (Deleted) and a BACKUP_COUNT = 0.
When I run a RESTORE ARCHIVELOG ALL VALIDATE; it returns a long list of my deleted files with:
RMAN-06025: no backup of archived log ... to restore
OK, enough background. My question is how do I get RMAN to not look for my deleted files since I have several good backups?
I realize my deletion policy says the files have to be backed up once to disk, which according to the V$ARCHIVED_LOG view they are not, but I was hoping since I ran the CROSSCHECK RMAN would not even be concerned with them.
Many thanks for any advice!!
-garyThanks for the help! Square brackets! Doh!
I changed the SQL just a bit. I have only one (1) thread and the primary database was running for several months before the standby was implemented so there are over 3500 sequence#'s in the V$ARCHIVED_LOG view for the Primary (DEST=1) that are not in the Standby (DEST=2).
Here's the SQL I ran, using the SQUARE brackets! :-)
SELECT SEQUENCE#
FROM V$ARCHIVED_LOG
WHERE DEST_ID=1
MINUS
SELECT SEQUENCE#
FROM V$ARCHIVED_LOG
WHERE DEST_ID=2It appears to me the Standby is accepting and applying the archived logs from the Primary based on looking at the most recent archived log sequence#'s.
I'm just trying to get rid of the entries in the RESTORE ARCHIVELOG VALIDATE; command output.
I don't have an RMAN Repository but am using the control files at the moment.
Any other suggestions are very welcomed!!
Thanks again!
-gary -
Restore Exchange 2010 Database into Restore Database in stages
I have a full backup and a number of incremental backed up using TSM.
I am trying to restore a database into a recovery DB so that I can mount an old version of a users mailbox.
To restore the full backup and all the subsequent incremental backups up to the point where the restore is required would take over 400GB, but we only have a 200GB drive to restore to.
It seems that it must be possible to:
Restore full backup + some incrementals
perform recovery to replay logs
Delete replayed logs
restore more logs
perform recovery to replay logs
Delete replayed logs
... repeat from step 4 until the database is at the right time
When I get to step 5 and try to replay the next set of logs, I seem to get various errors.
Is what I am trying to do actually possible? Apply logs in stages to a database file?
Kind Regards,
ShaneHello Shane,
I don't think it is possible to replay the transaction logs manually once it is in Clean Shutdown state from a previous incremental backup recovery and replay. Log Required field of the database will be set to 0-0 once replay/recovery is completed and database
is set to clean shutdown state (you can verify with eseutil /mh dbpath) and then you won't be able replay the transaction logs anymore...
Probably you could just restore logs to a temp location on network attached drive and perform full restore (full + all incremental)...
For some reason you have to invoke the hard recovery manually you can use eseutil /cc "temp path of logs"
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Clear Partial Data in an Essbase Aggregate storage database
Can anyone let me know how to clear partial data from an Aggregate storage database in Essbase v 11.1.13? We are trying to clear some data in our dbase and don’t want to clear out all the data. I am aware that in Version 11 Essbase it will allow for a partial clear if we write using mdx commands.
Can you please help me on the same by giving us some examples n the same?
Thanks!John, I clearly get the difference between two. What I am asking is in the EAS tool itself for v 11.1.1.3 we have option - right clicking on the DB and getting option "Clear" and in turn sub options like "All Data", "All aggregations" and "Partial Data".
I want to know more on this option part. How will this option know which partial data to be removed or will this option ask us to write some MAXL query for the same"? -
How to attach/restore the sql database/file extension (*.File)
I took backup the database long back ago. Now I
am unable to attach/restore the sql database/file extension (*.File). I
have the file type called (*.File) which i need to attach/restore. Can anyone tell me what's are the steps
taken to do this?
Thank in advance.Database
name-->Right Click-->Tasks-->Restore-->Database-->Select "Device" radio button-->Click device Path button-->Click "ADD" button --> I tried with "All Files(*)"--> then i selected my database-->ok-->ok-->ok -->
then i am getting below error.
I am unable to post image.
"Restore of database 'Databasename' failed. (microsoft.sqlserver.management.relationalenginetasks)"
Additional Information:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.0194. That version is incompatible with this server, which is running version 11.00.2100. Either
restore the database on a server that supports the backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended).
Can
you please help me to solve this error.
Thanks,
Laxmi. -
How to aggregate all events which lead to occurence of a complex event?
Hi there,
Is it possible to aggregate all the events which lead to occurence of a complex event in this complex event?
Let's say we have six simple events
id amount groupId
1 1 1
2 0 2
3 1 1
4 1 2
5 2 2
6 1 1The definition of the complex event is
select sum(amount), groupId from myStream[range 20 seconds slide 20 seconds] group by groupId having sum(amount) = 3Consider I have the following class for my complex event:
public class ComplexEvent {
private int groupId;
private int amount;
private List<SimpleEvent> events;
// getters and setters
}Is it possible to have two complex events:
ComplexEvent1 = {groupId=1, amount=3, events=[{id=1, amount=1, groupId=1}, {id=3, amount=1, groupId=1}, {id=6, amount=1, groupId=1}]}
ComplexEvent2 = {groupId=2, amount=3, events=[{id=2, amount=0, groupId=2}, {id=4, amount=1, groupId=2}, {id=5, amount=2, groupId=2}]}How can we achieve it?Hi,
I have blogged an example solution to this type of use case since it is a common scenario in CEP applications:
http://blogs.oracle.com/CEP/2010/08/enriching_complex_events_with.html
There is not currently out-of-the-box support for paging events to disk storage. If you truly have more events than can fit into the Java heap, you could try persisting the events to the database or to a data grid, such as coherence, and then joining with the database or cache to create the complex event containing the causal events.
Another approach is to horizontally partitioned the stream of incoming events across multiple servers.
Regards,
Seth -
Time Machine Restore - Empty Postgres Databases
Hello,
i just had to restore Lion Server and have a problem with it now. All files are back, but my the databases are completely empty.
I have a dumpall.psql file, but i dont see how to get it back into the postgres database. I know how to deal with mysql, but this seems completely different to it.
I also have PgAdmin installed and can connect to the database.
Can someone point me the right way please?
Another Problem i have is, that the server seems to forget my password. Everytime i try to login with my main user, the password field shakes. I am a 100 % sure it is the right password. I can only login with a second admin account. When i do a restore from an Open Directory Backup in Server Admin it seems to work again for a while, but not for long.
Please help me, i really need the server back to work.Ok, i'm at least some steps closer:
I have my data back in postgre and all users have their data back on their devices. At least their data up to the last backup.
Here is what i did:
I restored another time machine backup.
Apple claims, that serverbackup (and therefore Time Machine) does backups of the postgre data, which is true.
Apple claims, that the postgre data will be restored in case of a Time Machine restore. In my case it didnt.
You find a dumpall.psql in your time machine backups --> Library/Server/PostgreSQL/Backup (In my case there was a gzip file as well, but it didnt seem to be updated)
I connected with postgre using pgadmin 3 following this tutorial: http://www.mactasia.co.uk/revisited-using-postgresql-in-lion-server
I dropped all databases but the postgres-database.
Open Terminal and write "sudo psql -f infile postgres" with infile being the path to your dumpall.psql (More commands at http://www.postgresql.org/docs/8.1/interactive/backup.html)
This will write all data from the backup to your database.
Voilá, you will have your data back.
Give the clients time to get the content back from the server.
Never start the wiki again, because it was the one which destroyed everything in the first place.
Still i have a huge problem:
I cant login with my main admin user. I can login with another admin. Then i reset the main user password and i can login with it again. But only once. Any advice on this? -
hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me
If Other (the yellow bar) is too big something is corrupted. The only solution (that I know of) is to restore from your most recent backup using iTunes (see http://support.apple.com/kb/ht1766).
-
I just got the iPhone 5 and took it on a trip and took a bunch of photos on it. I just came home and hooked it up to my Mac for the first time and hit restore. All of my trip pictures disappeared. Is there any way I can retrieve them?
Did you by chance have photo stream turned on? If so then they might be there. When you restored your phone it deleted everything and they will be unretreivable from your computer.
-
Is there a way to restore the All Contacts app on my gen 1 ipad? I seem to have lost the data and can't turn a page or add new contacts. I did try to reload the contacts (and I guess everything else) from my itunes computer backup but nothing happens to the All Contacts app. everything else seems to work fine on the ipad so I'm not sure what happened to the data or why. not sure i want to try and reset the whole ipad just for this one little app or feature...thanks in advance to any replies.
Sorry, had to sep out. I see the contacts "page" but I can't use the letters on the left margin or a finger touch to change location. Nor does anything happen when I touch the plus sign to allow me to add a new contact. So maybe he actual old contact data is still there I just can't get to it. Rick
-
my iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?
If you weren't able to sync the purchases to a computer previously and now your iPod needs to be restored so you can't sync it now, then you may be out of luck and will need to purchase your content again. Officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. The official statement of their policy can be found here, among other places.
You can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Good luck. -
i synced my phone to another computer to get the update and when i went to restore it, all my music was earased, but everything else was normal. how do i get my music back?
I enabled the backup, but when i went to use the backup, the phone recovered everything except the music.Of course your music was lost - unless you uncheck sync music, you're syncing with another music library. You'll have to sync your phone with the other/original computer to the music back.
-
I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.
<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
Maybe you are looking for
-
Product support for Portege M800
Hi all, Recently my girlfriend gave me her TOSHIBA M800 laptop. Enlighten me pls as to why I cannot find the model M800 in Toshiba's product support tab? The models I see there are all 805-XXXXXX. Is 800 supposed to mean 800 series and that in fact t
-
Cannot activate ipad because myy fiance' who passed away had it connected to find my iphone and cloud I have his ipad ID but not his mail password. I cannot get past security questions such as what was your first car, etc. No help from the Genius Ba
-
Just started with importing from Rebel XTi into LR, RAW previews are blank and JGP upside down. Show Preview is selected. Images actually import okay in LR. Using Card Reader works fine. I reformatted the cards, upgraded my Rebel firmware to v1.1.1,
-
I just recently upgraded my Intel iMac to Mavericks and can no longer use my Canon CanonScan 8600F scanner. What can I do to enable this device with my iMac? Or, should I consider purchasing another compatible scanner?
-
Heelo, i'm building my portfolio and like build a blog too. However a want show the last 12 post (excerpt) of the blog on index, how can i do this?