Restore mac mini snow leopard no administrative privilege

Would like to reset mac mini (Mid 2007 - Macmini 2,1) to factory settings.  However, don't have administrative privileges.  Tried to boot with os snow leopard and holding alt and c.  It didn't work.

Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer.  Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the  "C" key.  Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X.  You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
     5. If you are planning to sell or give your computer away, then do the following:
        After you reformat your hard drive and reinstall OS X, the computer restarts to a
        Welcome screen and asks you to choose a country or region. If you want to leave
        the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
        press Command-Q to shut down the Mac. When the new owner turns on the Mac,
        the Setup Assistant will guide them through the setup process.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks?  I kept getting an error for backwards compatibility.   Is this possible or do I need to purchase another copy of Snow Leopard Server?

    I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks?  I kept getting an error for backwards compatibility.   Is this possible or do I need topurchase another copy of Snow Leopard Server?

    The OS disks that are shipped with a particular product
    are set up so that tey will only install on that product.
    It will install on any Mini of that exact vintage, but that
    is all.
    This is to prevent people from doing exactly what you
    are trying to do.  The license for OSX shipped with any
    is only valid for that product.  Also, Snow Leopard,
    including Server, is only permitted to be run on one
    computer at a time.  Bottom line, unlike Lion, legally
    you cannot install the same copy on multiple
    computers unless some "family pack" or site license
    is purchased.
    Yes, you need to purchase another copy.
    The copy of Snow Leopard license is here:
    http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

  • I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Please could someone help me sort out this problem.

    I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Pleease could someone help me sort out this problem?

    The User Manual has this:
    Formatting Table Cell Borders
    You can change the line thickness and color of table cell borders. Or you can hide the border of any cell.
    To format table cell borders:
    1 Select the cell border segments you want to format.
    2 Use the controls in the format bar or in the Table inspector.
    Click to choose a stroke color.
    Click to choose a stroke style.
    Click to choose a line thickness.
    Stroke pop-up menu:  Lets you choose a stroke style. Choose None to hide borders.
    Line thickness:  Controls the thickness of the stroke.
    Color well:  Lets you choose a stroke color.
    When you click the color well in the format bar, a color matrix appears. Select a color by clicking it in the matrix, or click Show Colors to open the Colors window for additional color options.
    When you click the color well in the Table inspector, the Colors window opens.
    User Guide: http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf

  • Mac Mini Snow Leopard Installs ok, but reboot just hangs

    I've just attempted to install SL as an upgrade from OSX 10.5.8. The installation (though tedious) worked ok. However, when it attempted to auto reboot after Installation Successful, it got to the Apple logo, and just hung there.
    Needless to say, I was doing this last night, after Apple support had closed... So I tried to resolve it myself...
    It sounded as if it was still occasionally trying to read the cd, so initially I thought there was some issue with the installation cd. Naturally I could not eject that. I tried multiple ways of reboot to eject the disk, all to no avail (space bar, mouse button, and pretty much every combination of keys to get into open firmware, even resetting ram), and eventually I forced it to boot up off the instal disk, which worked ok, then restored the system from a Time Machine backup. That all went ok. So, I'm now back with my original working system...
    So, anyone got any idea why the install worked, but the auto-reboot failed? I don't have much non-Apple stuff installed - only 1Password in fact - and otherwise the OS and environment is as bought from the retailer.
    Any suggestions appreciated Cheers, Pete.
    It's a Mac Mini, here's the tech stuff...
    Model Name: Mac mini
    Model Identifier: Macmini3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 2 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MM31.0081.B06
    SMC Version (system): 1.35f0

    HI Pete,
    Not sure why this happened....
    Go here and read the post by, "a brody" ... Topic : When updating to 10.6 or 10.6.1 please remember the following
    http://discussions.apple.com/thread.jspa?messageID=10180165#10180165
    And check out this post by, "Kappy" ..... Suggestions for Safely Installing Snow Leopard
    http://discussions.apple.com/thread.jspa?threadID=2137339&tstart=0
    *The installation wasn’t successful*
    If you were unable to install Mac OS X, try the following:
    Disconnect any external devices you don’t need during installation.
    Try installing Mac OS X again.
    If you were unable to install Mac OS X again, choose Utilities > Disk Utility. Select the disk on which you want to install, click First Aid, and then click Repair Disk. After repairing any problems, quit Disk Utility and then click Continue to try installing again.
    Make sure there is sufficient disk space.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
    Carolyn

  • Can i install bootcamp on mac mini snow leopard server 2010

    hello,there are 2 harddisks on a mac mini server 2010 (snow leopard server.)i want to use the other hdd for installing Windows home server 2011 x64 .
    but there is no bootcamp on the server.(do i have to download it?)
    how can i do this,or do i have to use parallels desktop.
    i have also a mac mini and a macbook pro and an alienware and a clevo laptop so i want the 2 servers seperate(and the mac-server on all the time)

    You would need to install SL (non sever) on you Mac Mini Server.
    You may be able to install the nonsever version on your 2nd HDD
         -Partition you 2nd HDD to the max BootCamp Partition
         -Install Windows Home Server on the BootCamp Partition (don't know of Windows Server is supported)
    So you would have:
    hdd1 - SnowLeopard Server
    hdd2 - SnowLeopard (non-server) + Bootcamp Partition
    Scenario 2:
    If you don't have a need for SL Server SW, then wipe out the system and put only the regular SL (non sever) on disk 1. Partition Disk2 for Bootcamp only.
    hdd1- SL (non-sever)
    hdd2 - Bootcamp
    I really don't know if you can copy the Bootcamp app onto SL Server OS to create a Bootcamp partition.

  • Mac Mini, Snow Leopard and 64bit ... problems.

    Hi,
    Hope you can help.
    My Mac Mini = 2Ghz Intel Core 2 Duo, 4GB RAM. I assumed that Snow Leopard would run fully 64bit when I upgraded ... I guess I assumed wrong?
    I checked my Mac Mini using a 3rd party app and got these results:
    64 bit processor
    64 bit EFI
    64 bit kernel boot mode
    32 bit kernel
    ... why is it using the 32 bit kernel?
    I also checked the System Profiler and '64-bit kernel and extensions' is set to 'No'.
    I finally checked the 'extensions' in System Profiler and all except the following 8 extensions are 64-bit ready:
    System6.0
    Mach6.0
    Libkern6.0
    IOKit6.0
    CHUDUtils
    CHUDProf
    CHUDKernlib
    BSDKernel6.0
    Since upgrading I can honestly say I have not noticed any difference what-so-ever, this could be because I previously upgraded the RAM from 1GB to 4GB and got a nice speed boost from that.
    So to sum up, should I be able ro run 64-bit? And if not, and I'm stuck with 'virtual' 64-bit with no noticeable difference, why did I bother buying the upgrade?
    It was definately not made clear anywhere that I would have a reduced version with no noticeable difference in computing power nor added/upgraded apps, everything works precisely how it did before.
    :S

    Yes I've tried that seceral times in several different ways to try and force the 64-bit kernel to load ... no joy.
    I've also used a 3rd party app to try and force 64-bit after a reboot ... no joy.
    Have you got Snow Leopard installed and using it in 64-bit mode? And secondly have you seen any real benefit of upgrading? Honestly?
    I don't mean to be funny about it but all I seem to have got out of the update is a lighter wallet :/

  • Mac Mini Snow Leopard Server vs Airport Extreme

    My Macbook is starting to reach it's memory maximum and running slow (120Gb). Most of the memory space is taken up by videos, photos, movies, and music. I have contemplated purchasing an Airport Extremem and connecting multiple hard drives using a powered USB hub. But I am wondering about the speed of this set-up when opening iPhoto, iDVD, and iTunes. Would my system be faster with the Mac Mini with Snow Leopoard Server?

    Unless you have a reason to want your files on the network instead of on your machine, I'd highly recommend replacing the drive in your MacBook, and at the same time getting a bit larger external drive to use for backups. If you think you're going to have a lot of data, there are now 500 GB or even 750 GB drives you can install. Then for the external, you can get a 1 TB (1000GB) drive for pretty cheap and back everything up.
    If you just get an Airport and hook up hard drives to it, you're going to have slower access to your data. You also won't be able to get to your data when you have your MacBook out of the house.

  • Mac Mini Snow Leopard Server - can't login with admin account

    SO....i was having problems setting up network accounts from my mac Mini Server. I took it to the Apple Genius bar one night after work to get some help on why the login screen appears for Other..but could not login into any of the accounts I created.
    They made an appt for me for the next morning since they had a "guy" that could help the next morning.
    When I got there for my second appt..they said they don't support server issues. Only consumer products..I though the server WAS and i WAS a consumer of their products..so..they gave me a number of a consultant..of course..for pay...
    So later that day I was trying some other configurations....the power came out while I was checking a monitor cable..and when I restarted I couldn't login to the master admin account.
    Since mac mini server doesn't have a DVD drive..you have to boot up with their Server DVD from another computer and the Server installs it through airport.
    So I did the boot up via airport from the server install DVD.
    Did the Utility disk repair AND password changed. Got some error about not being to able to login if I don't change the keychains to the account.
    Rebooted the server.
    It didn't work.
    So now stuck with a login window..and NO ACCESS to change anything.
    HELP!!!!

    You can access to system with root account.
    If you didn't enable before, boot from SLS DVD and activate from menu (after choose language).
    After that, reset all the passwords (there is a menu to do that).
    After that exit from installer and reboot.
    At login screen you can try to login with your user and new/blank password.
    If it fails, you have to login with user root and the password you choose before.
    With root user, you can access to all system, be very carefull.
    Now you can create a new user and import all the files (you have to do a little work with permissions)
    I hope i help you!

  • TS3195 My mac mini (Snow Leopard, v10.6.8) does not acknowledge my iphone 4, iphone 4s or ipad2 in iPhoto, Image Capture, iSync or Preview but it does in iTunes.  I am at a loss for importing photos, short of emailing them.  Glitch with OS X 10.6.8 ?

    My Mac Mini (v10.6.8) does not acknowledge my iphone as a device in iPhoto, Image Capture, iSync or Preview although, iTunes does.  I am at a loss for importing photos other than emailing them to myself. Same problem with my iphone 4, iphone 4s, ipad2 and New iPad. Is this a problem with OS X 10.6.8 as I read some posts claim? Please help.

    I was able to import photos in iPhoto and Image capture when I was running SL 10.6.8 on my older MacBook.
    Did you try quitting everything, restart the Mac and then try again?
    Are there any updates at all for the Mac? I was helping one user not all that long ago and there were updates for her Mac software that had nothing to do with the OS and when she downloaded the updates - the iPad was then recognized in iTunes.

  • Should the bluetooth in an ipad 1 recognise bluetooth from a mac mini (snow leopard) or iphone4?

    Hello, i have an ipad1 64gb 3g which obviously has bluetooth.  When searching devices it has never recognised another device, particularly the mac mini and iphone.  Bluetooth is switched on.  I would like to eventually be able to wirelessly sync calenders, contacts, photos etc without hard wire connecting.  Should this be possible between apple devices???

    Not possible with Bluetooth as they don't have the FTP profile (File Transfer Protocol).
    WiFi syncing between your computer, or iCloud and your iPad will be available in iOS 5
    Message was edited by: deggie

  • What is the migration path to Lion Server from Mac Mini Snow Leopard Server

    I've currently got a mac mini server happily serving wikis/blogs... what is the update path to Lion Server?

    excellent resource! thanks!
    my mac mini server got stuck after lion install but before running server set up...
    I had to reset the PRAM (http://support.apple.com/kb/ht1379) before I could get control of the server back.

  • Mac mini snow leopard multiples issues

    Suddenly my mac mini stopped detecting my PS2 keyboard connected with a USB to PS2 converter. Ethernet also shows cable unplugged though it is infact plugged it and working fine with Windows and Linux.  I bought this mac mini in a garage sale to learn mac env. So I a complete novice user. I have been searching for the solution and found ones either for 10.6.5 or 10.7 but nothing for 10.6.8. Not sure if Airport works. I dont want to invest in a wifi router in any time soon.. so please help !!!
    My mac mini config details are as below :
    OS X version : 10.6.8
    Processor : 1.83 GHz intel core 2 Duo
    RAM: 4 GB 667 MHz DDR2 SDRAM
    Ethernet card :
    Marvell Yukon Gigabit adapter 88E8053 Singleport copper SA.
    vendor ID : 0x11ab
    Device ID: 0x4362
    Subsystem ID: 0X 5321
    Revision ID: 0X0022
    Link Width : x1
    BSD name: en0
    Kext name: AppleYukon2.kext
    Location: /system/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/AppleYukon2 .kext.
    Version : 3.2.1b1

    This is what I see:
      Type:    Ethernet
      Hardware:    Ethernet
      BSD Device Name:    en0
      IPv4:
           Configuration Method: DHCP
    IPv6:
           Configuration Method: Automatic
    Ethernet :
           MAC Address: 00:xx:xx:xx:xx:xx
           Media options:   
           Media Subtype: Auto select
      Proxies:
      Exceptionss List : *.local.169.254/16
      FTP Passive Mode:    Yes
    Service Order: 1

  • Mac Mini Snow Leopard "headless" on my home network suddenly responds very slowly.

    I run a Mac Mini "headless" (no screen or keyboard) on my home network.  It has run perfectly until now.  Last week I experimentally tried the newer version of Chicken of the VNC (usual access with Screen Sharing.  Since then, responses have become so slow that it is almost unusable although everything else seems to be running fine.
    Any ideas?
    John Selma

    Hi John,
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

Maybe you are looking for

  • Help! Mac OS 9.2.1 wont install!

    So I have been trying for about 3 almost 4 weeks now to install Mac OS 9.2.1 on my Power Macintosh 5200/75LC. So when I boot up and hold C down it gives me a message that says "Sorry, a system error occurred. error type 1010". So now I have another p

  • Do I need a convertor?

    I live in the US and I am getting the Ipad 2. Next month I am going to the UK for vacation. I know I need a plug adaptor for the outlet. But, do I need a convertor to charge it? Or will the plug convert the power automatically? Thanks!

  • Installing itunes on windows 8

    I'm having trouble installing itunes on windows 8.  It was running fine untill I tried to connect a new ipod touch. I've tried unistalling itunes and quicktime.  itunes will now not install.  any suggestions?

  • I've connected my zen v before setting up the software...

    i've got a big big problem: i've connected the player to the computer before setting up the software and now i just can't make it work with my pc... i've tried uninstalling everything but nothing seems work... please help me!

  • Service account for Windows Update sync

    Hi all, I would like to know if it's possible to change service account used by WSUS 2008R2 SP1 to sync with Windows Update servers, and if so how. Thanks. Have a good day. FXE