Restoring computer w/ Time Machine backup

I believe my hard drive went out today because I can not get a response from the computer. When I start it up it shows a white screen with a blinking folder in the middle w/ a question mark. I am prepared to take it into the Apple Store tomorrow & loose all my info.
Question: I recently did a backup of time machine before this happened. When (or if) I get a new hard drive, can I restore everything the way I had it just from the time machine backup?
Thank you for any help!

Absolutely. You'll boot off the leopard DVD and then use the restore function from the utilities menu in the installer to select the most recent backup, and then restore and reboot. You should be back up and running right where you left off.

Similar Messages

HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before. It allows you to use older PowerPC applications on your Mac. On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

Restoring from a Time Machine Backup on a new Hard drive

Hi,
I have a late 2009 iMac and I had the HD replaced (it was included in the recent HD recall).
Before I had it replaced, I made a backup using my time capsule and it was on the latest version of Mountain Lion.
My question is, since I have to install the OS using the original install discs which was Snow Leopard, if I use the restore from Time Machine using Mac OSX Utilities, will my Mac restore my Mountain Lion backup (and have everything like it used to before I had the HD replaced)? Or do I have to reinstall Lion then Mountain Lion then restore from there?
It would be a pain to re download everything.
Hope someone can help me out.
Thanks in advance

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for your Time Machine backup drive.
5. Click on the arrow button below the icon.
Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

Restored iMac from Time Machine Backup - OS Updates out of whack

Hi all.
I just had to get a new hard drive, as part of the Apple Seagate Replacement program.
I have installed Snow Leopard on my new drive, rebooted and restored from my Time Machine backup.
Once I rebooted from that, my "About This Mac" stated I was using OS version 10.6.2 and I had to re-install updates to bring me back up to 10.6.8.
How can this be, as I thought a full restore from Time Machine would also restore all updates? Seems weird to me.
Thanks,
B.

Belly Buckle wrote:
1) Does this screw up my files??? I'm already experiencing issues having to re-install Flash Player, re-importing Mail, etc. Would you think that my system files could be corrupt?
It shouldn't screw up your files. If you are experiencing problems, maybe you should erase the disk and restore your Time Machine backup again, but now restoring the whole backup instead of restoring it after installing Mac OS X. Note that Migration Assistant sometimes doesn't work properly and it can create problems on Mac OS X.
Belly Buckle wrote:
2) Is there a way of restoring from my Time Machine backup without actually using my original install disks first?
If so, how would I do this, as the pane which says "Do you already Own A Mac" only comes up after installing the software from the DVD.
As you have problems after restoring the backup, I recommend you to start from the Mac OS X DVD that came with your Mac and restore the backup:
1. Insert the Mac OS X DVD that came with your computer, and press C key while your Mac is starting.
2. Go to Utilities menu > Disk Utility, select Macintosh HD in the sidebar, go to Erase tab and erase the disk.
3. Close Disk Utility, go to Utilities menu, select the option to restore the Time Machine backup and follow the steps.
This will save you time searching a solution and it's safer than using Migration Assistant. After restoring the backup by this way, your computer will be as it was before replacing the hard drive

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

Error 150:30 after restoring CS4 from Time Machine backup

I just got myself a new Imac with OS X Maverick and set it up using a time-machine-backup. My Adobe CS4 now has a Problem with the license and shows me error: 150:30?
Do I need to uninstall CS4 and reinstall? Is there any easier solution to this problem?
Thank you anyone for some help.
chris

Thanks a lot for your help......everything back to normal after reeinstallation.
chris
Am 29.09.2014 um 23:28 schrieb John Waller <[email protected]>:
Error 150:30 after restoring CS4 from Time Machine backup
created by John Waller in Adobe Creative Cloud - View the full discussion
Do I need to uninstall CS4 and reinstall?
Unfortunately yes.
Also run the Cleaner Tool prior to reinstalling
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Restoring from Time Machine backups invariably breaks the activation mechanism (Error 150:30) and there's no easy way to fix a 150:30 error other than via re-installing.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6775090#6775090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot

Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?

Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT

HT201250 (1) Where is the "Time Machine menu" and the choice to "Enter Time Machine" (mentioned in the "Restoring data from Time Machine backups" section)?

1) Where do I find the "Time Machine menu" and the choice to "Enter Time Machine" (as mentioned in the "Restoring data from Time Machine backups" section in the Mac Support article "Mac Basics: Time Machine")?
2) How would I restore e.g. a particular photo from a backup I made with Time Machine? I can see how this is done with Word documents, but can't see how to do it with photos?

Welcome to Apple Support Communities
1. The Time Machine icon is on the menu bar.
2. If you want to do that with individual photos, it's the same way as for documents. If you want to do it with iPhoto, you have to restore the whole iPhoto library, not only one photo

Are all programs / configuration settings restored from a Time Machine backup?

The hardrive in my late 2006 Macbook 2.0ghz laptop has finally kicked the bucket. I confirmed this with an Apple Genius at my local Apple store after she plugged in an external drive and running disk utility to run a diagnostic. However, I forgot to ask her about some details concerning my time machine backup which resides on an external drive that connects via firewire. I do know that my files and folders should be restored without issues. Although, I'm not sure about the following:
1. Will all my non-apple applications / programs be restored?
2. Will my configuration settings for mail be restored?
3. Will my itunes settings be restored (I have an iphone and ipad that connects to itunes)?
4. Will my contacts in address book be restored?
I still have the original drive of this laptop which still works just fine and boots up okay (never erased the OS) where the upgraded drive that I installed a few years ago is the one that failed. Therefore, I will be reverting back to the original drive that is smaller and slower.
The Genius recommended to run disk utility from the Snow Leopard Upgrade DVD (I originally had Leopard installed) to format the drive/install the OS and then do a full restore from my time machine backup. Although, I'm not sure if all my programs and settings for certain apps will be restored. I appreciate any help or other optioins I can possibly do to get back my saved files, programs, and settings.

Restoring from my time machine backup

My macbook pro OS crashed...the local apple store reinstalled OSx 10.6.8, told me to restore from my time machine backup drive. How do I get the backup to go? I've plugged the drive in, the machine finds it, but I see no place to click and start the restore...

To restore your backup:
1. Insert the Mac OS X disc and hold the C key while your Mac is starting.
2. Choose your language, go to Utilities menu (on the menu bar), choose the option to restore a backup and follow the steps.
Another way is to use Migration Assistant > http://pondini.org/OSX/Migrate.html It will create a new user with the transferred files

How do I restore files from time machine backups made before reformatting macbook air?

How do I restore files from time machine backups made before reformatting macbook air?

The section titled "Restoring data from Time Machine backups" in the following may help: http://support.apple.com/kb/HT1427

Restoring Address Book on new computer from time machine backup of old comp

Hi,
Just bought a new computer and figured that e-thing I need is in the time machine backup. I am having trouble though finding my Address Book data. If someone knows how to do this, I would appreciate it very much,
Thanks,
Crazy

Hey mate... well I never use migration assistant cos i always like to have a totally new system on the new computers without the quirks of the last one.
Can you use migration assistant once you JUST to get hold of the Address Book or do you also need to import a whole bunch of other stuff... I just don't know cos I have never used it.
Thanks heaps,
Crazy

Restoring movies from Time Machine backup

Last night I tried restoring my photos from a Time Machine backup. It appears that all my movies (.avi files) have been restored as .jpg files. When I open the pictures folder, it automatically opens iPhoto and starts importing my pictures. Is there something I can do to make sure that my .avi files are imported as .avi files and not .jpg files? Thanks!

From Apple Help:
To restore files:
Open a window for the item you want to restore.
For example, if you accidentally deleted a file from your Documents folder, open the Documents
folder. If you want to recover an email message, open your inbox in Mail.
If you’re missing an item from the desktop, you don’t need to open a window.
Click the Time Machine icon in the Dock.
If Time Machine isn’t in the Dock, look for it in the Applications folder.
Use the arrows or the timeline along the right side of your screen to browse through all the
backups Time Machine has created.
If you need more information about an item, double-click to preview it.
The windows behave just like Finder windows, so you can open folders, click items in the sidebar,
and use the search field in the upper-right corner of the window.
When you find the item you want to restore, select it and then click Restore.
You can restore individual items, multiple items, folders, or your entire hard disk.
If an item you restore has the same name as another item on your computer, you’re asked if you
want to keep the current item, the restored item, or both.
The restored item is returned to its original location. For example, if it is found in the Documents
folder, it is returned to the Documents folder. Time Machine may ask if you want to re-create one
or more folders in order to return a restored item to its original location.
Kj

Restoring System from Time Machine backup - only option is older backup

I have two drives in a Mac Pro - a system drive and a data drive. Yesterday morning the system drive died. The computer hung and when I manually restarted it, I got the circle with a line icon, and then on a subsequent restart, after resetting the PRAM, I got the ? folder icon.
I restarted with the install disk in, and booted into Disk Utility. I attempted to repair the system drive, but it was reported to be corrupted and not repairable.
I installed a new drive, booted back into Disk Utility, formatted the new drive, and initiated a "restore from Time Machine".
My problem is, once the list of "complete" Time Machine backups came up, the most recent one listed was for October of this year, almost 3 months ago. In that time, Time Machine has been on and running without issue. I know there were Time Machine updates made for this computer the morning of my crash, and the day before, etc. But in terms for restoring my system, my most recent restore point is late October.
I went ahead and restored to that most recent Time Machine "complete" backup, and several hours later my system is back up and running, but as it was three months ago, not yesterday morning.
Why, if Time Machine has been performing hourly backups without fail, was I unable to restore to something more recent? If I connect to Time Machine (on a Time Capsule) from the computer in question (after the restore) and browse the backups on it, the most recent folder I see is 2011-01-14-190729 - still not as recent as I would hope (maybe the drive going bad was causing errors with very recent backups) but much more recent than October.
I would really like to be able to get my system back to a much more recent snapshot than it's at now. (I have disabled Time Machine backups on it in the meantime so as not to overwrite the backups I currently have)
Any suggestions?

Will Henderson wrote:
I would really like to be able to get my system back to a much more recent snapshot than it's at now
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
On the list of backups (point g there), click the "pop-up" menu; there may be two entries there. If so select the other one -- it may have the backups you want.

Can i restore from a time machine backup that is not the latest one?

I am trying to restore from a May 7th time machine backup. At that time my username was michaelhood. I had a system crash and when my computer was returned to me I inadvertently set it up under a different username, thinking I would do the restore later. Between May 13 and today, Time machine did backups under the name mhoo4494. Changing the name didn't let me access my May 7 backup, nor did creating a different user account. I have erased the hard drive and am reinstalling from the Install CD. I have set up a third user name. I now want to restore my data from the Time Machine May 7 backup. How do I do that? Migration assistant saw two users -- mhoo and mhoo4494 (michaelhood was not an option). I selected them both, but got no data for either -- no docs, no music, no pictures. This procedure should not be this hard~!!

Hi uclamikey90,
It is possible, using Migration Assistant, to restore the contents of your hard drive selectively. See this article -
Mac OS X v10.6: How to use Migration Assistant to transfer files from a Time Machine backup - Apple Support
In particular -
To migrate data from a Time Machine backup
In Finder, press Command-Shift-U.
Double-click Migration Assistant.
Click "Continue" and enter an administrator name and password when prompted.
Select the "From a Time Machine backup or other disk" option, then click "Continue".
Select your Time Machine backup disk or Time Capsule (enter the user name and or password if prompted), then click "Continue".
Select the Time Machine backup you would like to restore (such the most current one you just made), then click "Continue".
Select Items to Migrate, then click "Continue". Note: The "Continue" button will be dimmed until the "Calculating…" stage is complete.
A user account sheet may appear if you have a user name on your Mac that is the same user name in your Time Machine backup. You will have to give the username in your Time Machine backup a new username to avoid conflicts. Note: This will create a new user account on your Mac to hold the data from the Time Machine backup. After migration, you can use the /Users/Shared folder to transfer data files the accounts.
Migration Assistant will begin the process of transferring the items you selected to migrate. When it is finished, click "Quit" to exit.
When you reach step 7, deselect items that you do not wish to migrate. Videos, photos and music are likely candidates for this as they take up a lot of disk space. You can later put items on an external hard drive.
Thanks for using Apple Support Communities.
Best,
Brett L

Restoring computer w/ Time Machine backup

Similar Messages

Maybe you are looking for