Restoring data after Query in Oracle form

Hello All,
My requirement is to check some check boxes --> SAVE --> F11 --> Control F11. User want to see the checked box again. Means thec check box should be checked until the form is open.
Please reply thanks.
Thanks.
Edited by: Amit1cs on Apr 15, 2013 1:11 PM

Hello Indira,
I have done this so far ...
I have created a PL/SQL table type and I am storing the checked box row number in that table type on trigger KEY_COMMIT trigger. but now I want to call this Pl>SQL table which have data in trigger KEY-EXEQRY (to recheck the check box again)which I can not... please suggest how this can be achieved.
Please suggest.

Similar Messages

Frm-40505:ORACLE error: unable to perform query in oracle forms 10g

Hi,
I get error frm-40505:ORACLE error: unable to perform query on oracle form in 10g environment, but the same form works properly in 6i.
Please let me know what do i need to do to correct this problem.
Regards,
Priya

Hi everyone,
I have block created on view V_LE_USID_1L (which gives the error frm-40505) . We don't need any updation on this block, so the property 'updateallowed' is set to 'NO'.
To fix this error I modified 'Keymode' property, set it to 'updatable' from 'automatic'. This change solved the problem with frm-40505 but it leads one more problem.
The datablock v_le_usid_1l allows user to enter the text (i.e. updated the field), when the data is saved, no message is shown. When the data is refreshed on the screen, the change done previously on the block will not be seen (this is because the block updateallowed is set to NO), how do we stop the fields of the block being editable?
We don't want to go ahead with this solution as, we might find several similar screens nad its diff to modify each one of them individually. When they work properly in 6i, what it doesn't in 10g? does it require any registry setting?
Regards,
Priya

For Update Query from ORACLE Forms

Hi
We are using Oracle Forms 10g running with 10g database 10.2.0.1.0. We happend to see a query which is getting generated in AWR report like Select rowid, all_columns from TableName for Update of C1 Nowait. But no such query is really written in forms and we are aware that, Any query prefixed with rowid is definitely executing from Forms. But how the ForUpdate and Nowait clause is appended to the query.
We have checked the following properties in the database Block
*1) Locking Mode is set to Automatic*
*2) Update Changed Columns only is set to YES*
*3) Query all records is set to No (Though this particular property may not be relevant to the issue)*
What is the property or setting which might trigger such a query from ORACLE Forms with ForUpdate and Nowait clause.
Any ideas/suggestions on why such behaviour. Please have a healthy discussion on this. Thanks in advance.

you can't dynamically add a query to the data model in reports.
You should look into the XML based customization of Oracle Reports. This will enable you to define a report dynamically by creating a definition in XML.
Also another option is to have the report with a query in it and use lexical parameters in reports to pass the query definition or just the where part of it.
Look at the reports online help for both of these solutions.

Can i use case in query in oracle form 6i

sir can i use case in query in oracle form 6i
such as
select empno, case when deptno=10 then dptno end from emp;
please gice me

Hello,
Does this code compile ?
If not, I'm afraid that the PL/SQL engine of Forms6i does not recognize this syntax.
Francois

Data to be queried in oracle forms

select a.dept_id,a.drive_id,a.qc_type_id,a.qc_subtype_id,
a.equip_code,a.staff_id,a.out_of_service,a.comments
from qc_equipment_used a,qc_equipment b
where a.equip_code = b.equip_code
and a.dept_id = 5
and a.drive_id = 'DRV2007930'
and qc_type_id = 1008
and qc_subtype_id = 1000
and equip_type_id =1000
But when I am trying to query in the form I get only one line.
Header is database
in the detail ids are database but a.equip_code,a.staff_id,a.out_of_service,a.comments are non database columns. The data gets saved properly but when I query I get only one line.
Cursor C1 is select a.equip_type_id
from qc_dept_equipment a,qc_equipment_type b
where a.equip_type_id = b.equip_type_id
and a.qc_type_id = :qc_daily.qc_type_id
and a.qc_subtype_id = :qc_daily.qc_subtype_id
and alias_desc = v_description;
Cursor C6 is select a.equip_code,a.staff_id,a.out_of_service,a.comments
from qc_equipment_used a,qc_equipment b
where a.equip_code = b.equip_code
and a.dept_id = :qc_daily.dept_id
and a.drive_id = :qc_daily.drive_id
and qc_type_id = :qc_daily.qc_type_id
and qc_subtype_id = :qc_daily.qc_subtype_id
and equip_type_id = v_equip_type_id;
Begin
select count(*) into v_count from qc_daily a
where a.dept_id = :qc_daily.dept_id
and a.drive_id = :qc_daily.drive_id
and qc_type_id = :qc_daily.qc_type_id
and qc_subtype_id = :qc_daily.qc_subtype_id;
v_description := 'Genesis Sealer';
:parameter.equip_code := 'one';
Open c1;
Fetch c1 into v_equip_type_id;--:qc_dept_equipment.equip_type_id;
Close C1;
If v_count > 0 then
Open C6;
loop
Fetch C6 into :qc_equipment_used1.equip_code,:qc_equipment_used1.staff_id,
:qc_equipment_used1.out_of_service,:qc_equipment_used1.comments;
:parameter.P_EQUIP_CODE := v_equip_code;
:parameter.equip_type_id := v_equip_type_id;--:qc_dept_equipment.equip_type_id;
:parameter.EQUIP_TYPE_ID1 := :parameter.equip_type_id;
Exit when :system.last_record = 'TRUE';
next_record;
End loop;
Close C6;
End if;
End;
DEPT_ID     DRIVE_ID     QC_TYPE_ID     QC_SUBTYPE_ID     EQUIP_CODE     STAFF_ID
5     DRV2007930     1008     1000     SEALCEN001     0143
5     DRV2007930     1008     1000     SEALCEN038     0143

Sorry, but i don't understand your problem. What is that code you provided? In what trigger do you place it? What is it supposed to do?

How to restore data after reinstall oracle

My hard disk broke down yesterday before I awared to backup my oracle data. I could do nothing but reinstall the whole system(Windows & Oracle software).
When I finished install all softwares, I found I can't reload the old tablespace data files to new oracle environment.
Can anyone warn-heated tell me how to load the previous tablespace data files to new oracle environment? The old files for system, undo, temp (*.dbf) and user tablespaces as well as control files (*.ctl) and redo logs (redo*.log) are all intact in another hard disk.
Environment: Win2k3 Server + Oracle10g.
Appriciate any information and suggestion.

Should we assume that during the time your database existed you didn't take a single backup and were not in archive log mode?
Look into the "CREATE TABLESPACE" syntax with the REUSE keyword.
Do not be surprised if you fail. Perhaps having confronted this you will use RMAN to make daily backups. <g>

Developering ADF form in query mode (Oracle forms simulation)

Hi,
we have a requirement for developing the existing Oracle form using Oracle ADF. The existing Oracle form displays the form in query mode by default. We can enter the search criteria in any of the text fields and then execute query to get the results. If the user does not enter any search criteria, then the form loads specific record based on default criteria into the form. Could you please help developing similar form using ADF.
At present I created the view object with one bind variable and dragged the view as ADF form to the jspx page. Then I am launching the form in query mode (executing the find method on the view object using operation binding at the time of loading the page). After entering the query criteria in the form, If I click on a button I am executing a method in the managed bean. In the managed bean I am executing the "Execute" operation on the view and it is working fine.
But my problem is if the user does not enter the search criteria I have to pass default parameters to the view object and return the default record in the form.
Can you please help in resolving the issue.
Thanks and Regards,
S R Prasad

Hi Frank,
Thank you for providing information. I created the query panel with the table by dragging all the named criteria. But this is not the look we are expecting for this form. As we have to deveop ADF form with the same behavior as oracle forms, the user must be in a position to edit the data in the same field as that of query field.
As an example, we have to design a form for Dept table. We have to display all the columns of the dept view in the form at the time of launching the form in query mode. Once the user enters any search criteria in the form, we have to perform search and display the record(s) matching the query criteria in the same columns displayed in the form. User should not see any changes in the form layout.
If the user does not enter any data in the form, then we have to display the record(s) in the form with the specific department id(This department id can be calculated based on the data in another table).
Can you please help us in resolving the issue.
Thanks and Regards,
S R Prasad

Index Usage from SQL query in Oracle Forms

Would using LIKE/OR in where clause (of an indexed column) will force the the query to NOT use INDEX. We have these where clause in Oracle Forms Records Group.
Below are two examples...
1. If we have a where clause with LIKE would that NOT use the index?
Example: ColumnName like :block.Column||%
2. How about having an OR clause?
Example: and (ColumnName = :block.column or :block.column is null)
Thanks

Hi
Answer 1: Where with like clause WOULD use the index.
In this example index on ColumnName
Answer 2: Write better where:
Example: and (:block.column is null or ColumnName = :block.column)
When :block column is null then statement after 'or' is not used. Index will not be used with RBO, i think.
The best way to be sure is to look at explain plan on the original query.
Regards
Kuba

Want to Read BLOB data and display on Oracle form

Hi All,
I have a table with a BLOB field and there is blob data saved here against a account id.
I want to display the blob data on the oracle forms front end for the queried account id
Any one to help me out how to read and display blob data in Oracle and display the same
Tks

this is a commoon request please try to search the forum.

Using a Sum query in Oracle Forms

Greedings,
I have the following query which works fine in PL/SQL but i cant get it working in Oracle forms as i get an error in SUM(SELECT...) . Any quidance on how i should fix my query to work in Forms?
select
   Sum((SELECT kl.amount
            FROM S03_a_salfldg@oracle_to_sun kl
            WHERE Trim(kl.accnt_code)=Trim(a.acnt_code)
            AND kl.period between 2008001 AND 2008012 AND ROWNUM=1)) AS actual
   from so_budgets_cat a,a01_acnt@oracle_to_sun b,so_budgets_com c,so_budgets d
   where trim(a.acnt_code)=trim(b.acnt_code)
   AND a.cat=c.cat
   AND TRIM(d.acnt_code)=trim(a.acnt_code)
   AND d.business_object=10000103883
   AND d.business_object=c.bus_object
   AND d.business_object=a.business_object
   AND SubStr(d.period,1,4)=Trim(c.PERIOD_Y)
   AND C.period_Y BETWEEN substr(2008001,1,4) AND substr(2008001,1,4)
   GROUP BY a.cat,a.acnt_code,c.com,a.cat_desc,b.descr,d.acnt_code
   order by a.cat,a.acnt_code,c.com,a.cat_desc,b.descrThanks in advance

And what error would that be? Also where are you using this query? In a from clause query? Also you didn't specify any version infos; as forms has it's own PL/SQL engine there is a possibility that you run in a version problem if the code runs fine in SQL*Plus but fails to compile in forms (e.g. when running Forms 6i against a 10g database). Without those informations answers to your question are based on guessings, and most likely will result in a question-answer ping-pong.
cheers

How to show the result of query in oracle forms 10g to Excel Sheet File

Dear All,
I have query and i want the result to be show in excel sheet file in oracle forms
for example if i have a form with search criteria and when pressed the button of ( export to excel ) the result is
excel file contains the result of the query .

The only method to achieve this is with the help of Webutil. Please go through documentation for more help.
Regards,
Manoj Chakravarthy

App did not Restore Data after iOS 4 update on 3G

One App - Magic Pad , a note App failed to restore all my notes after my G3 updated to iOS 4? None of the notes restored. These are mostly important Business / Technical notes and I need them badly, any suggestions are appreciated.
Pete

I was able to fix the issue. I had to manually put the phone in restore mode by holding the power button and the home button until the power turned off while the phone was still plugged into the computer, then when the phone turned off continue holding the home button until you hear the computer recognize the device. Then navigate to the back up folder that is described earlier and cut out all of the back up folders and paste them on your desktop. Then iTunes said that a device was recognized in restore mode or something like that and you click yes to restore. After this happen the iPhone will go through the processes of restoring the phone. When it finishes it will start like a brand new device and it will be updated to the OS4.0. You will then need to go through the tabs at the top of the iPhone sync window and re check all of the items that you want synced to your phone. The only data that was totally lost was my pictures, but after the iPhone finishes reloading, you may be able to go back to the desktop and cut the backup folders and paste them back into the backup folder and restore your phone from a previous back up and you may still be able to recover those photos. This worked for me so I hope it works for all of you as well. Thanks!

I want to restore my iPod 3 generation via iTunes, but I don't have any backup. Will I lose data from iPod or I can restore data after?

My iPod 32 GB 3 generation is dammaged. I want to restore it using iTunes, but I don't have any backup. So will I be cpable to restore all data after restore or I will lose it forever?

If you can't make a backup
iOS: Back up and restore your iOS device with iCloud or iTunes
Then you can't restore restore from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
What is current status of the iPod?

Query on oracle forms

when i am trying to run my oracle form on google chrome i am getting a error message that oracle jinitiator version is very low
kindly give the answer

Google Chrome is not compatible with the Oracle Jinitiator. Actually, very few - if any - current browsers are compatible because the Oracle Jinitiator is based on Java 1.3.
As others have asked, we need to know your Forms, Windows, Java and browser versions in order to offer you some help.
Craig...

Sending data to EXCEL from Oracle Forms 6.0 URGENT!!!!!

Dear all,
I have a problem to which I hope to get a solution from anyone
out there...
The problem is as follows:
I have a form that contains some data. Now this data I need to
transfer to an excell sheet. I tried to do so through report
builder (6.0) but every time I try to convert my report I get a
general protection fault. So instead I'm sending the data to a
text file through text_io built in then reopening the text file
from excel. Isn't there a better way to do it? ie sending the
data stright from forms to excel?
Thanks in advance
null

TRY THIS OUT....OLE2.... IT WORKS GREAT...DIRECTLY TO EXCEL...
Oracle Corporate Support
Problem Repository
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
Problem ID : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: OLE AUTOMATION NO LONGER WORKS AFTER UPGRADE TO OFFICE97
+=+
Problem Description:
====================
You have upgraded to Microsoft Office97 and OLE calls in your
Developer/2000
applications no longer work.
Problem Explanation:
====================
Examples:
You are using Forms to send data to a Microsoft Word document
and print
letters, using ole automation. This worked fine with Word 6.0,
but when
they
upgraded to Word 8.0 (Office97), the letters do not get printed.
When you try to get an object handle to the Excel97 Workbooks
collection
using
the OLE2 Package, you get the following error:
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
The Same code works fine against Excel 7.0.
[ Search Words: Office 97 msoffice ms office object linking and
embedding
application get_obj_property workbook invoke_obj
appshow
upgrade upgrading bug483090 olex.rdf demo ]
+==+
Diagnostics and References:
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
Solution ID : 2077481.6
For Problem : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: MICROSOFT CHANGED OLE INTERFACE FOR OFFICE97
+=+
Solution Description:
=====================
WORD:
Microsoft made some changes in the upgraded version of Word
which cause it
to
come up as a hidden application. Customer had to add "AppShow"
to his code,
and ole automation works fine now.
EXCEL:
The issue here is that Microsoft changed the object "Workbooks",
which is
now
a property of object "Excel.Application". So, replace the call:
workbooks := ole2.invoke_obj(application, 'workbooks');
with
workbooks := ole2.get_obj_property(application, 'workbooks');
For example:
PACKAGE BODY olewrap IS
-- Declare the OLE objects
application OLE2.OBJ_TYPE;
workbooks OLE2.OBJ_TYPE;
workbook OLE2.OBJ_TYPE;
worksheets OLE2.OBJ_TYPE;
worksheet OLE2.OBJ_TYPE;
cell OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
procedure init is
begin
-- Start Excel and make it visible
application := OLE2.CREATE_OBJ('Excel.Application');
ole2.set_property(application,'Visible', 'True');
workbooks := OLE2.GET_OBJ_PROPERTY(application, 'Workbooks');
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'c:\test\ms\excel\test.xls');
workbook := OLE2.GET_OBJ_PROPERTY(workbooks, 'Open', args);
OLE2.DESTROY_ARGLIST(args);
worksheets := OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
worksheet := OLE2.GET_OBJ_PROPERTY(worksheets,'Add');
-- Return object handle to cell A1 on the new Worksheet
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 1);
OLE2.ADD_ARG(args, 1);
cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'Hello Excel!'
OLE2.SET_PROPERTY(cell, 'Value', 'Hello Excel!');
END;
procedure addstuff is
BEGIN
-- Return object handle to cell A1 on the new Worksheet
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 2);
OLE2.ADD_ARG(args, 2);
cell:=OLE2.INVOKE_OBJ(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'This is the added stuff'
OLE2.SET_PROPERTY(cell, 'Value', 'This is the added stuff');
END;
procedure stop is
begin
-- Release the OLE objects
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'C:\OLETEST2.XLS');
OLE2.INVOKE(worksheet, 'SaveAs', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(cell);
OLE2.RELEASE_OBJ(worksheet);
OLE2.RELEASE_OBJ(worksheets);
OLE2.RELEASE_OBJ(workbook);
OLE2.RELEASE_OBJ(workbooks);
OLE2.RELEASE_OBJ(application);
END;
Solution Explanation:
=====================
Microsoft changed some of the OLE calling interfaces for the
Office97
products. Thus, some of your existing OLE calls may need to be
changed to
comply with the Office97 interface.
Consult with Microsoft and your Office97 documentation or more
information
on
what the OLE interface is for the Office97 suite of products.
Additional Information:
=======================
Related Bugs:
483090 (Closed, Vendor OS Problem)
FORM GIVES FRM-40735: UNHANDLED EXCEPTION ORA-305500 AGAINST
EXCEL97.OFMPE0497
+==+
References:
ref: {8192.4} BUG-483090
Oracle Corporate Support
Problem Repository
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
Problem ID : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: OLE AUTOMATION NO LONGER WORKS AFTER UPGRADE TO OFFICE97
+=+
Problem Description:
====================
You have upgraded to Microsoft Office97 and OLE calls in your
Developer/2000
applications no longer work.
Problem Explanation:
====================
Examples:
You are using Forms to send data to a Microsoft Word document
and print
letters, using ole automation. This worked fine with Word 6.0,
but when
they
upgraded to Word 8.0 (Office97), the letters do not get printed.
When you try to get an object handle to the Excel97 Workbooks
collection
using
the OLE2 Package, you get the following error:
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
The Same code works fine against Excel 7.0.
[ Search Words: Office 97 msoffice ms office object linking and
embedding
application get_obj_property workbook invoke_obj
appshow
upgrade upgrading bug483090 olex.rdf demo ]
+==+
Diagnostics and References:
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
Solution ID : 2077481.6
For Problem : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: MICROSOFT CHANGED OLE INTERFACE FOR OFFICE97
+=+
Solution Description:
=====================
WORD:
Microsoft made some changes in the upgraded version of Word
which cause it
to
come up as a hidden application. Customer had to add "AppShow"
to his code,
and ole automation works fine now.
EXCEL:
The issue here is that Microsoft changed the object "Workbooks",
which is
now
a property of object "Excel.Application". So, replace the call:
workbooks := ole2.invoke_obj(application, 'workbooks');
with
workbooks := ole2.get_obj_property(application, 'workbooks');
For example:
PACKAGE BODY olewrap IS
-- Declare the OLE objects
application OLE2.OBJ_TYPE;
workbooks OLE2.OBJ_TYPE;
workbook OLE2.OBJ_TYPE;
worksheets OLE2.OBJ_TYPE;
worksheet OLE2.OBJ_TYPE;
cell OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
procedure init is
begin
-- Start Excel and make it visible
application := OLE2.CREATE_OBJ('Excel.Application');
ole2.set_property(application,'Visible', 'True');
workbooks := OLE2.GET_OBJ_PROPERTY(application, 'Workbooks');
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'c:\test\ms\excel\test.xls');
workbook := OLE2.GET_OBJ_PROPERTY(workbooks, 'Open', args);
OLE2.DESTROY_ARGLIST(args);
worksheets := OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
worksheet := OLE2.GET_OBJ_PROPERTY(worksheets,'Add');
-- Return object handle to cell A1 on the new Worksheet
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 1);
OLE2.ADD_ARG(args, 1);
cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'Hello Excel!'
OLE2.SET_PROPERTY(cell, 'Value', 'Hello Excel!');
END;
procedure addstuff is
BEGIN
-- Return object handle to cell A1 on the new Worksheet
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 2);
OLE2.ADD_ARG(args, 2);
cell:=OLE2.INVOKE_OBJ(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'This is the added stuff'
OLE2.SET_PROPERTY(cell, 'Value', 'This is the added stuff');
END;
procedure stop is
begin
-- Release the OLE objects
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'C:\OLETEST2.XLS');
OLE2.INVOKE(worksheet, 'SaveAs', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(cell);
OLE2.RELEASE_OBJ(worksheet);
OLE2.RELEASE_OBJ(worksheets);
OLE2.RELEASE_OBJ(workbook);
OLE2.RELEASE_OBJ(workbooks);
OLE2.RELEASE_OBJ(application);
END;
Solution Explanation:
=====================
Microsoft changed some of the OLE calling interfaces for the
Office97
products. Thus, some of your existing OLE calls may need to be
changed to
comply with the Office97 interface.
Consult with Microsoft and your Office97 documentation or more
information
on
what the OLE interface is for the Office97 suite of products.
Additional Information:
=======================
Related Bugs:
483090 (Closed, Vendor OS Problem)
FORM GIVES FRM-40735: UNHANDLED EXCEPTION ORA-305500 AGAINST
EXCEL97.OFMPE0497
+==+
References:
ref: {8192.4} BUG-483090
null

Restoring data after Query in Oracle form

Similar Messages

Maybe you are looking for