Results Page Not Showing Results

Hi
I am a new dreamweaver user. I am attempting to create a
search feature on my website using a database powered by
coldfusion.
I followed the tutorital labeled "Adobe Macromedia Wildlife
Project" to set up my search page (index.cfm) and results page
(results.cfm).
On my results page, I added a recordset assosiated with the
desired database. After I completed the recordset, I clicked on the
test button to test the database. The recordset tested correctly. I
then dragged fields to the appropriate spots on my results page
where I wanted database results to appear. (Example.. the following
text:... {newwildlife.CONTACT} appeared where I wanted the contact
results to appear).
Unfortunately, when I go to my losal host URL and type in a
search term that should bring up results, the results page appears
but is blank wherever the recordset fields are where the database
information should appear. I have been working on this for a long
time. Does anyone know why this is not working correctly. Please
help
Thank you
Rusty9073
Note:
I've attached the code to this message
Attach Code

Hi BKBK
I changed that sections as you mentioned. Thank you for
explaining the steps. Unfortunately, the page still has the same
problem
I've simplified the code to narrow the problem.
I have the following text on my results page:
The Wildlife Project
CONTACT
STREET
CITY, STATE ZIP_CODE
PHONE
I replaced the "CONTACT" text with a <cfoutputag> tag
for the "rf_wildlife" recordset. When I test the recordset with the
text "AZ", I get the contact name "Richard Camus"... so on my
search page when I type the text "AZ", I should get the following
result on my search page"
The Wildlife Project
Richard Camus
STREET
CITY, STATE ZIP_CODE
PHONE
However, when I type the text "AZ" on my search page and hit
enter, I get the following results on my search page:
The Wildlife Project
STREET
CITY, STATE ZIP_CODE
PHONE
Instead of having the name "Richard Camus" in the contact
section, it just shows up blank
I retried this whole process on a separate computer with the
same results. I've attached the simplied code. Can you see what I'm
doing wrong? I've also attached the search page code. Is there
maybe something wrong with the search page code? Thank you for your
help.
Rusty9073

Similar Messages

IWeb Main Page Not Showing

I've researched to death and tried everything but can't fix this.
Recently did a clean install on my iMac and since then iWeb won't work.
I have :
- Reinstalled from original disc then updated to latest version 3.0.4
- Deleted the com.apple.iWeb.plist file and com.apple.iWeb Cache Folder, restarted, and tried opening again
- I have removed my domain.sites2 file to try and open iWeb and initiate making a new site
iWeb is fully loaded and operational - in Activity Monitor it does not have a red flag - shows as being operational. I can access iWeb's Preferences, open and close various Inspectors, but the main window is simply not visible.
I am on Lion 10.7.2
I had updated my website using iWeb while on Lion 10.7.1
I have a small business and my website is outdated and will be losing me new customers at this point who will think I don't have the latest stock and information.
Any help appreciated - naturally no need to reply if 'fixes' are as per other posts and noted as having been tried above.

Where is the main page not showing? In iWeb or online?
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain or from Toad's Cellar.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Page not showing correctly and missing sitemap

I have two problems involving Dreamweaver 8.02.
First is the index page not loading correctly. But when you
preview the page from Dreamweaver's browser everything shows fine.
But opening up a new broswer it is all messed up. I am using
Dreamweaver 8.02 and one of the existing templates in CSS style.
Second issue is the missing sitemap whenever I FTP files to
the server. I used to be able to view the remote site and the local
files side by side. Now. the white box indicating that perspective
is gone. Did I click on something accidentally? If so, how do I
reset everything?
Here's the URL:
http://www.clarkandclarkpublishing.com/
I have also attached the code.

I'm not sure but could the problem possibly be with the router itself. I checked many other topics of people reporting the same problems as me and the person above me. They all seem to be the same WRT54G wireless routers and all seem to have been reported at least within the last couple weeks. It seemed like the help given too never really helped the problem. I'm sure it's not the browser because I have had the same result on all that I've tried or the firewall because I have had that off while trying just like everyone else who seemed to have the problem.

Why are photos that are placed on the page not showing up in links panel?

seems really random, I have 2 files that have several photos on them, but one photo on each is not showing in the links panel

not sure, just checking on errors from other co-workers, but I tried copying and
pasting from Quark and got the same result, so that is probably what they did.
thanks

HELP, please! iWeb Album Pages not showing up at all

My ftp uploaded pages are not showing up on either safari or firefox! I tried to fix the javascript via Wyodor's previous posts, but it's still not showing anything.
http://www.lakewilde.com
Thank you!

Yay, that was it! Thanks Roddy, I appreciate it. Have a great day

Problems with page not showing up in Internet Explorer

I uploaded my page. All was fine. Looked good in all
browsers.
home.gci.net/~larry-and-jackie/index.htm
Now all of a sudden my index.htm page (also have default.htm
page) shows up as a black screen only no pictures. No words.
All of the sub pages show up fine if you add that to the
address. Just the Index. is not showing up in Internet Explorer.
Looks good in Firefox, Netscape and Safari.
example home.gci.net/~larry-and-jackie/index3.htm
Anybody have any suggestions?
J Whedbee

I'm seeing the entry page at:
http://home.gci.net/~larry-and-jackie/
with no problems.
I'm also seeing
http://home.gci.net/~larry-and-jackie/index.htm
with no
problems... pics, black background.
http://home.gci.net/~larry-and-jackie/default.htm
is just the same as
index.htm
http://home.gci.net/~larry-and-jackie/Index.htm
(note the capital "I" )
can't be seen .... no such file.
Not sure why you would have an index.htm and a default.htm
both really
aren't needed.
Have you tried clearing your browser cache?
Nadia
Adobe® Community Expert : Dreamweaver
Tutorials |SEO |Templates
http://www.DreamweaverResources.com
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"J L Whedbee" <[email protected]> wrote in
message
news:enccnu$n4t$[email protected]..
>I uploaded my page. All was fine. Looked good in all
browsers.
>
> home.gci.net/~larry-and-jackie/index.htm
>
> Now all of a sudden my index.htm page (also have
default.htm page) shows
> up as
> a black screen only no pictures. No words.
>
> All of the sub pages show up fine if you add that to the
address. Just the
> Index. is not showing up in Internet Explorer.
> Looks good in Firefox, Netscape and Safari.
>
> example home.gci.net/~larry-and-jackie/index3.htm
>
> Anybody have any suggestions?
>
> J Whedbee
>
>
>

Pages not showing up in web search

I am a newbie to DW 8 (I am a photographer).
Like everyone, I would love to find my pages in a web search
with google or yahoo, but they are not showing up.
Here is an example of the info (from the web page) for one of
my pages (classes I teach):
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Digital photography classes with Richard
Sjolund</title>
<link href="file:///Scanner-1/Dream Program and
sites/ws2.css" rel="stylesheet" type="text/css">
<style type="text/css">
<!--
.style1 {color: #FF0000}
.style2 {color: #0000FF}
.style3 {
color: #000066;
font-weight: bold;
the title is correct- anad what I want. But, if I search on
that title information - I find nothing.
Is the information better off in something other than the
page title?
Here is the web site:
http://www.naturephotostudio.com
many thanks.
Dick

How long has the site been up? If you search for this
Photography Shows
Richard Sjolund it comes up first in google.
Search for this Richard Sjolund was born in the Upper
Peninsula of Michigan
and it comes up as duplicate content an other website
http://www.artsiowacity.com/artist/RSjolund/rsjolund.htm
so could be a
problem from the search engines point of view. Hard to say
looks like a lot
of competition in this field.
Dave
"DickSj" <[email protected]> wrote in
message
news:e79puk$c7m$[email protected]..
> I am a newbie to DW 8 (I am a photographer).
>
> Like everyone, I would love to find my pages in a web
search with google
or
> yahoo, but they are not showing up.
>
> Here is an example of the info (from the web page) for
one of my pages
> (classes I teach):
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
> "
http://www.w3.org/TR/html4/loose.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>Digital photography classes with Richard
Sjolund</title>
> <link href="file:///Scanner-1/Dream Program and
sites/ws2.css"
> rel="stylesheet" type="text/css">
> <style type="text/css">
> <!--
> .style1 {color: #FF0000}
> .style2 {color: #0000FF}
> .style3 {
> color: #000066;
> font-weight: bold;
>
> the title is correct- anad what I want. But, if I search
on that title
> information - I find nothing.
>
> Is the information better off in something other than
the page title?
>
> Here is the web site:
>
>
http://www.naturephotostudio.com
>
> many thanks.
>
> Dick
>

Some Photo Pages not showing no matter the browser

I'm using iWeb '08 and have 2 separate sites. I noticed last night that, only on one of the sites, the photo pages are not showing the photos. Yet, on the other site, the photo pages are fine. It's really weird.
Anybody have any thoughts?
BTW, I tried to view them in both Safari and FF.
Thanks!

Are those 3 pages constructed like the other with photos placed on the page rather than a photos page with a slideshow? Those three pages don't show the photos being uploaded. They are not listed as missing, just not included on the page (go to Window->Activity menu option). In the sites that do display correctly the photos are listed as shapeimage_3.png or something like that.
You might try republishing the entire site to see if that will jump start those three pages.

Iweb web page not showing full page on the web

I have a web site that I build using iweb. I have installed intense debate for a commenting system. I have two problems. My comments are not showing up even after i approve them even though i chose to not monitor comments and when you view the page most of the comment box is missing. I have changed the height and width of the page, changed the height and width of the age layout in iweb, nothing seems to help. I have contacted there support team but they just keep saying the same things. Apparently i need to do this to get the commenting system working "looks like you don't have any JavaScript variables set. You'll need to set some postid's and URLs." That is copied directly from the email they sent me. I don't know what any of that means...And please don't say read the tutorial they offer because i cant fallow that either. This is the address of the website please look at it and tell me what you see. http://www.siobhanbyron.com/SiobhanByron/The_Outlying/TheOutlying.html

I did. I clicked the link you left and it brought me to another discussion similar to this one and then i clicked on the link that was within that conversation (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) and it brought me to here (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) here, your blog. Which is an excellent example of what i a trying to do. I will instead try to add the code that you had already placed in the prior conversation. I wasn't sure if the code you were speaking of was in your blog or in the actual conversation...ill try that

OHS 11gR1 web-page not showing up after creation, registration of webgate

Hello there,
The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
Thanks!!

Hi,
You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
mark, if this helps.
Regards,
Kishore

Web pages not showing up correctly

I performed a typical daily update to my website last night, and when I reviewed it online, the typical links do NOT shot up. They are often words that are linked to news sites. These 'hot' words do not show up now…only bluish rectangular boxes with blue question marks in them. When the page loads, it seems to NOT load most of the links. Some links still do show up and it seems that all of them work if clicked on. Any ideas?
For reference: www.njnaturenotes.com
This might help if others see what I am seeing.

Rich:
Just visited your site and everything looks as it should. There are not blue boxes and the counter is displaying all 5 digits. Clear your browser's cache and reload the page. See if that will help.
OT

"Pages" not showing in list of purchased apps on iPad

My wife bought "Pages" for her laptop - i want to download it on her iPad, too, but it's not showing on the list of her "purchased" apps. Where do i find her purchase of "Pages" on the iPad?

Pages for iOS and Pages for OS X are two different programs, two separate purchases.
Pages for the iPad is sold in the iTunes App Store.
Jerry

APS metrics page not showing all CPU's

I have installed BO 4.0 SP02 patch 11. I have seperated the CR
Scheduling service as a seperate job server form AJS.
My CR jobs are running fine however, I have 8 CPU on that machine but
in matrics page of Job server, it is showing
only 4 CPU. Why it is not showing all the 8 CPU?
does it mean that its limited to work for 4 CPU only.

Hi Atul,
Would it be possible that you have in fact 4 CPUs which are all dual cores?
So it's like you have 8 CPUs but in reality it's only 4 CPUs?
Regards,
Philippe

Re:DW8 flash on template page not shows flash

Hi Murray,
When I changed it to relative nothing changed, the .dwt works
fine but not
my other pages based on the template. Maybe there is
something wrong with
the editable regions?
Thanks for your help
Sam
Make the link to your Flash file be a root relative one.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
Hi all,
I have a template based page with one flash animation.
When I preview my template page the flash is working fine,
but in my pages
bases on the template I don't see my flash animation.
Do I miss something?
You can find my pages (text) on the following links:
http://www.waterloocity.be/doc/go2waterloo_FR-dwt-asp.txt
http://www.waterloocity.be/doc/index-asp.txt
I searched in the archives but fund nothing that helps me
I appreciate all help
Thanks in advanced, Sam

Then there is something wrong with the SWF file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SamDesign.be" <[email protected]> wrote in
message
news:[email protected]...
> Now, I see noting. In dreamweaver I see the swe but when
I do the "play"
> it's white
>
> "Murray *ACE*" <[email protected]> a
écrit dans le message
> de news: [email protected]...
>> Do you see the Flash element locally?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "SamDesign.be" <[email protected]>
wrote in message
>> news:[email protected]...
>>> Yes, I work localy for the moment.
>>>
>>> "Murray *ACE*"
<[email protected]> a écrit dans le
message
>>> de news: [email protected]...
>>>> Did you upload the Scripts folder?
>>>>
>>>> <script
src="../Scripts/AC_RunActiveContent.js"
>>>> type="text/javascript"></script>
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "SamDesign.be"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Hello Murray,
>>>>>
>>>>>
>>>>>
>>>>> I tray it again but still don't working.
I made a new page, without
>>>>> linking to a template, and there my
flash is also not showing up.
>>>>>
>>>>> Here is my code from a test page.
>>>>>
>>>>> Thanks for your time!
>>>>>
>>>>>
>>>>>
>>>>> <%@LANGUAGE="VBSCRIPT"
CODEPAGE="1252"%>
>>>>>
>>>>> <!DOCTYPE html PUBLIC "-//W3C//DTD
XHTML 1.0 Transitional//EN"
>>>>> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
>>>>>
>>>>> <html xmlns="
http://www.w3.org/1999/xhtml">
>>>>>
>>>>> <head>
>>>>>
>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>> charset=iso-8859-1" />
>>>>>
>>>>> <title>Untitled
Document</title>
>>>>>
>>>>> <script
src="../Scripts/AC_RunActiveContent.js"
>>>>>
type="text/javascript"></script>
>>>>>
>>>>> </head>
>>>>>
>>>>> <body>
>>>>>
>>>>> <script type="text/javascript">
>>>>>
>>>>> AC_FL_RunContent(
>>>>> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','wid th','100','height','60','title','test','src','/flash/newpub','quality','high','pluginspage ','http://www.macromedia.com/go/getflashplayer','movie','/flash/newpub'
>>>>> ); //end AC code
>>>>>
>>>>>
</script><noscript><object
>>>>>
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
>>>>> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
>>>>> width="100" height="60" title="test">
>>>>>
>>>>> <param name="movie"
value="/flash/newpub.swf" />
>>>>>
>>>>> <param name="quality" value="high"
/>
>>>>>
>>>>> <embed src="/flash/newpub.swf"
quality="high"
>>>>> pluginspage="
http://www.macromedia.com/go/getflashplayer"
>>>>> type="application/x-shockwave-flash"
width="100" height="60"></embed>
>>>>>
>>>>> </object></noscript>
>>>>>
>>>>> </body>
>>>>>
>>>>> </html>
>>>>>
>>>>>
>>>>>
>>>>> "Murray *ACE*"
<[email protected]> a écrit dans le
>>>>> message de news:
[email protected]...
>>>>>> If you changed it to ROOT relative,
e.g.,
>>>>>>
>>>>>> /Flash/whatever.swf
>>>>>>
>>>>>> Then it would work. Please show us
your code....
>>>>>>
>>>>>> --
>>>>>> Murray --- ICQ 71997575
>>>>>> Adobe Community Expert
>>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>>> ==================
>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>>> ==================
>>>>>>
>>>>>>
>>>>>> "SamDesign.be"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>> Hi Murray,
>>>>>>>
>>>>>>> When I changed it to relative
nothing changed, the .dwt works fine
>>>>>>> but not my other pages based on
the template. Maybe there is
>>>>>>> something wrong with the
editable regions?
>>>>>>>
>>>>>>> Thanks for your help
>>>>>>>
>>>>>>> Sam
>>>>>>>
>>>>>>>
>>>>>>> Make the link to your Flash file
be a root relative one.
>>>>>>> --
>>>>>>> Murray --- ICQ 71997575
>>>>>>> Adobe Community Expert
>>>>>>> (If you *MUST* email me, don't
LAUGH when you do so!)
>>>>>>> ==================
>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>> Technotes
>>>>>>> ==================
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I have a template based page
with one flash animation.
>>>>>>>
>>>>>>> When I preview my template page
the flash is working fine, but in my
>>>>>>> pages
>>>>>>> bases on the template I don't
see my flash animation.
>>>>>>>
>>>>>>> Do I miss something?
>>>>>>>
>>>>>>> You can find my pages (text) on
the following links:
>>>>>>>
>>>>>>>
http://www.waterloocity.be/doc/go2waterloo_FR-dwt-asp.txt
>>>>>>>
>>>>>>>
http://www.waterloocity.be/doc/index-asp.txt
>>>>>>>
>>>>>>> I searched in the archives but
fund nothing that helps me
>>>>>>>
>>>>>>> I appreciate all help
>>>>>>>
>>>>>>> Thanks in advanced, Sam
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Podcast home page not showing all podcasts

Hello fellow podcasters!
I've successfully created a podcast, but am now in a bit of a jam. See, the home page of my podcast is now not showing all my podcasts.
Click here for my podcast:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=277495620
Now, I'm not sure if the home page only shows the most recent ones (If so, how do they define, "most recent"?) and moreover, if it only shows the most recent ones, how do I change it so it shows ALL of the podcasts created?
Appreciate any help you can provide me.
Sincerely,
Dennis Chin

iTunes Store shows the number of podcasts that are listed in the XML file. Some podcast-making programs and online services which create the XML file for you limit the number of episodes in the XML file - usually there is a setting somewhere to adjust this.

Why do .asp pages not show in Design view

I have been asked to take over a website
built with .asp. Originally the pages all showed perfectly and I was able to amend. However, recently some pages will only open
displaying code - not html but computer code. This is a small excerpt from one of the pages. I would so appreciate some help. I use Dreamweaver 8.
佄呃偙⁅瑨汭倠䉕䥌⁃ⴢ⼯㍗⽃䐯䑔堠呈䱍ㄠ〮吠慲獮瑩潩慮⽬䔯≎∠瑨灴⼺眯睷眮⸳牯⽧剔砯瑨汭⼱呄⽄桸浴ㅬ琭慲獮瑩潩慮⹬瑤≤ാ㰊瑨汭氠湡㵧攢≮砠汭獮∽瑨灴⼺眯睷眮⸳牯⽧㤱㤹砯瑨汭•浸㩬慬杮∽湥㸢਍†格慥㹤਍††琼瑩敬吾敨倠楲牯⁹桃牵档漠⁦湅汧湡牐浩牡⁹捓潨汯›ഭ㰊ⴡ⌭湩汣摵⁥楦敬∽湩⽣慰敧瑟瑩敬椮据ⴢ㸭⼼楴汴㹥ℼⴭ⼠⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯⼯
Thank you if you can throw any light on this problem

Hi,
I qoute from Adobe Help page:
If you plan to develop dynamic pages, Dreamweaver needs the services of a testing server to generate and display dynamic content while you work. ...here is the link:
http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-79e0a .html
Hans-G.

Results Page Not Showing Results

Similar Messages

Maybe you are looking for