Retrieve Data from the Webservice through Data connection in Adobe Form

hi
i done Student ejb application
i.e, Create,Update,Retrieve,Delete operation. I create the WebServices to these operations. Present i connect the webservice through data connection . create operation is done successfully, but i dont know how to retrieve the the student details through data connection. how i can bind the retrieve values to the table in adobe form .how to bind from webservices to adobe form without context node.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

Similar Messages

How to extract the data from the chart. Data were not saved

Hi everyone. Beginners question, but could not find an answer to it
How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers
Thanks
Message Edited by olka on 07-18-2007 09:41 AM

You can still do it, the process just changes a bit...
Copy the control to a new VI as before, and change it into a control.
Create the diagram shown in the attached screen shot.
Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
Mike...
Message Edited by mikeporter on 07-18-2007 12:21 PM
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
extracting xy data.JPG ‏5 KB

How to populate the webservice XML data in to Table ODI- Webserice invoke

Hi,
I have multiple work orders in my oracle db table, That means multiple WorkOrder_Item_ID's are there in my source table. When I start transfer the data from source to Target using ODI , I need to get the information of multiple Work order Item_IDs from the Webservice response data ( XML data) of another system by calling ODI Webservice Invoke in ODI and insert the same Webservice XML response data in my source table in the corresponding Item_ID's.
My First question : How can I take the data from Webservice XML and put in to correspoding Item relevent data in to Source Table
Second question: How can I send the multiple work order item ID at the same time to the Webservice and insert the relevant item data in to Source table using ODI.
Finally this combined soure table data should be moved to Target table in ODI.. That I know.. How to do it.
Can any one please give answers for the above said two questions.
Thanks,
Rajesh
Edited by: user11226287 on Oct 30, 2009 4:40 AM
Edited by: user11226287 on Nov 1, 2009 10:44 PM
Edited by: user11226287 on Nov 1, 2009 10:59 PM

I find some words in the implementation guide, it says:"To collect data from your non-Oracle ERP systems or your trading partners' systems,you model each non-Oracle ERP system or trading partner as an Oracle Applications organization and store their setup and transaction data there".
But I can't find where to model the application organization for the legacy system.
anyone can give some clues? Thanks in advance.

HT201210 the iPhone 4 will not connect through iTunes and has extracted all data from the device

It seems like this could be an issue with the device. IT will not connect long enough to extract the data.

From the Community Ettiquette page found here.
1) Post only technical support questions and answers, unless otherwise noted.
2) Be polite, constructive and stay on topic.
3) Search for questions similar to your own before submitting a new question to the community.
I'm certain if you try option 3 you'll find relevant information on how to proceed.

Failed to retrieve data from the database.DB Vendor Code 156

Hi,
We recently migrated our scheduled Crystal Reports from BO XI R2 platform to BO XI 3.1, and are having issues with select reports that pull from the same SQL database. The tables and fields exist in the database - and I ran the SQL in a different tool and the syntax is correct. When I try to run an on-demand or schedule one of these reports in 3.1 Infoview I receive the following error:
Failed to retrieve data from the database. Details: [Database Vendor Code: 156 ]
Running:
CR 2008 SP2
BO XI 3.1 SP2 (FP 2.7)
Please advise! Thanks!

Hi LuAnn,
Not really clear what he said but I believe this is correct. The BOE servers are typically running under the local System Account. So when it passed the report job from the BOE Server it is the Local System account that the database is getting. We only do single hop for security. Which means if you are logged into InfoView under your local domain account and try to run a report BOE will not, unless specified in the custom database connection options in the CMC, pass your credentials to the DB but will pass the local system account credentials which is likely why these reports are failing.
As A TEST only Ask your Administrator to set up a user account in MS SQL Server that has rights to run all reports. Or when you create the report check on the option to use Trusted Authentication. Then when the reports are published to BOE your log on credentials should get passed to the DB server through BOE.
You'll have to more testing to find a Use account that you can run BOE Servers under and still maintain DB security and report level security that works for you. I also suggest you post your security questions to the BOE Administrator forum to get help configuring all of this and what others are doing.
Thank you
Don

Failed to retrieve data from the database when adding jdbc datasource

I'm having problems adding some tables to the selected tables list using the database expert.
I get the error messages "Failed to retrieve data from the database" followed by "Unknown Database Connection Error".
I thought it may be a permissions issue as it only affects some tables, but I can access the same tables fine using the same user through Oracle SQL Developer.
The database is Oracle 10g Express Editions
Crystal version is 12.0.0.683
Running on Windows XP
Any suggestions would be much appreciated.

Hi Stuart
Please refer SAP note 1218714 for this issue. The link to this article ia as follows:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733313334%7D.do
You can search for this note on the SDN site.
Hope this helps.
Thanks!

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My Laptop with Synced Firefox crashed and i had to do a fresh install, how can i retrieve all the synced data from the Mozilla Servers

I had set up Firefox sync on my Windows 7 Laptop which crashed and I had to reinstall windows. I used to be able to share content with my Firefox synced Android too. Is there a way i can retrieve the synced data from the Mozilla servers? I tried to set up sync on my new installation on a Mac 10.6 but when i click on Set-up Sync it asks me:
# Set-up new sync account (i already have one)
# I already have a sync account
When i select the second option it tells me to Add a device. I went in the "Sync Options" and tried the replace all data on this computer with my sync data, but nothing happened. When i try to connect from my Android it also asks me to add a device with the 3 boxes with letters in them.
So in both the cases it is asking me to "Add a device" but i cannot connect to my sync account in either case to sync data from there

Please search the forums. This has been covered here extensively.

Crystal Reports - Failed to retrieve data from the database

Hi There,
I'm hoping that somebody can help me.
I've developed a crystal report from a stored procedure which I wrote. I can execute the stored procedure within SQL Server and within the Crystal Reports designer without any errors. Furthermore, I have imported the report into sap and can run it within SAP from the server without any errors. SAP version 8.81 PL5
The issue is that when it's run from a client machine, I get the following error: "Failed to retrieve data from the database. Details: Database Vendor Code: 156. Error in the File RCR10010 {tempfile location}
Here's a list of things which I have tried, all to no avail:
- Checked user permissions to ensure that they have proper authorizations
- Re-set the datasource connection and re-imported the report to SAP.
- Exported the report and reviewed the datasource connection and re-imported to SAP.
- Tried to run the report on multiple machines to ensure that it's not machine specific
- Tried to run the report using different users to ensure it's not user specific.
- Tested other reports built from stored procedures on client machines to ensure that they work.
Any assistance in this would be GREATLY appreciated.
Thank you

After further testing, we found that the report could be run within SAP on any work station which had the CR designer installed on it.
As it turns out, the procedure which I wrote has temp tables in it. The runtimes built into the SAP client install do not support creating temp tables when executing the report from within SAP. Which is why the report could not retreive data.
To work around this, I installed external runtimes which were the same version of the Crystal Report and now the report can be run within SAP from any workstation which has the external runtimes (and not just the runtimes within the SAP client).
I hope this makes sense.

Failed to retrieve data from the database crystal reports 2008 in SAP B1

Hello friends,
I am using Crystal report 2008 with SAP B1 PL 8.8. When I run any report, it runs correctly from Crystal Report. But whenever I try to open the same report through SAP ( Tools -> Preview External Crystal Report ), it prompts the parameters for that report and then open up the crystal report window and throws an Error message ("failed to retrieve data from the database. Details [Database Vendor Code: 156]").
Please any one suggest me the corrective solution.
Thanks in Advance,
Keyur Raval.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

Failed to retrieve data from the database Error

I had some reports setup in Crystal XI based on a Sql server but recently we had an upgrade, the database has been moved to IBM Informix.
There is a certain table that seems to be causing the problem.
The error:
"Failed to retrieve data from the database
Details: 42000:[informix][informix ODBC Driver][informix]A syntax error has occured .[Database Vendor Code:-201]".
I run the same query in MS Access and it seems to run fine.
I even tried to do a simple dump of the table onto Crystal but no luck.
Any help is appreciated.
Thanks!
Achett13

Hi,
It seems your ODBC Driver is not compatible, try to download a driver which supports Informix through CR XI. I think you may have to download Data Direct Drivers 5.1 version to access Informix data tables through CR XI.
You can google it for Data Direct Drivers 5.1
Thanks,
Sastry

Failed to retrieve data from the database using Crystal Reports XI R2

I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?

Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry

Crystal Add on Failed to retrieve data from the DB Vendor Code: 2812

Hi everyone
Im using Sap Business One Version 2007A SP00 PL49, SQL 2005 and Crystal Reports Basic for Sap Business One (Add on 2.0.0.7). Whenever i try to generate a report from SBO the system displays the following message "Failed to retrieve data from the database DETAILS: Database Vendor Code: 2812"
The scenario is that, according to the Colombia's product local expert, Is not possible to create Stored Procedures, Views, Functions or anything in the customer productive database, in order to improve the performance of the query i created other DB where i created an stored procedure, after that, i called it from Crystal where it's working ok. But when i try to generate it from SBO it show the message promted.
Someone knows what could be happening
I'll be thankful

Hi everyone
My Stored Procedure contains the following code "annar.dbo.OIBT c", where Annar is the database name.
When i execute the report in Crystal directly is working without Issues, There everything is ok, the Stored Procedure parameters, sorts, cross tab. When i try to executed it from SBO it shows the prompt error.
The connection was OLE DB (ADO). I created an ODBC connection with the following settings
- SQL autentication based on Id and password created by user, in this case sa
- "Use Identifiers between "" ANSI " and "Use Null, filled and ANSI warning " are ticked.
- Execute character data conversion.
Microsoft SQL Native Client Versión 09.00.1399
Nombre del origen de datos: Bisynf
Descripción del origen de datos: BisynfDW
Servidor: BISYNFGER
Usar seguridad integrada: No
Base de datos: (Default)
Idioma: (Default)
Cifrado de datos: No
Certificado de servidor de confianza: No
Multiple Active Result Sets (MARS): No
Realizar conversión de los datos de caracteres: Yes
Registrar consultas de larga ejecución: No
Estadísticas del controlador de registro: No
Usar configuración regional: No
Usar identificadores entrecomillados ANSI: Yes
Usar nulos, rellenos y advertencias ANSI: Yes
Right now with Those setting is running ok again in Crystal Reports but when i try to execute from SBO the error has changed the error now is "connection could not be opened", Report Name in this case "Informe Stock Total" { 1D2DBDC5-41DE-43C0-A23C-391E7AEF2A37}.rpt
Tks a lot

Dynamic parameter - Failed to retrieve data from the database

I'm running a report with dynamic parameters and this report ran successfully for 2 days . For no apparent reason they stopped and the error message was received. There was no interference from head office soI'm at a loss to explain why the viewer / reports suddenly stopped working.
Now I get the following message:
Prompting failed with the following error message:
'List of values failure: fail to get values. Cause of error: Failed to retrieve data from the database. Error in file UNKNOWN.RPT: Failed to retrieve data from the database.'
Error source: prompt.dll Error code: 0x8004380D
The report is running on a Oracle database using CR-Viewer XI Product version 12.01.1.r228_v20071114
I know there is a problem with dynamic parameters and citrix, but this is not run on citrix.
Please help anypne
Edited by: tstegen on Sep 30, 2009 2:48 PM

Is this report based or Enterprise based LOV?
If you have report published to BOEnterprise, then it automatically creates a chain of objects for any dynamic parameter:
Data Connection,
Data Foundation,
Business View,
Business Element
and LOV.
Each of this objects have configurations like users rights, permissions and some have logon configuration. Failing any of those elements may cause LOV to fail.
One of the tests you may try is to test relevant Business View by connecting Crystal reports to it.
Are you familiar with Business View Manager?

Retrieve Data from the Webservice through Data connection in Adobe Form

Similar Messages

Maybe you are looking for