Retrieve Java Employee Selection for use in ABAP

Hi Experts
I have a case where I need to retrieve the PERNR from the Java Employee Selection iView for use within an ABAP WD iview.
I'm assuming that this can be handled from FPM...
Could someone help me in the right direction to get this done?
Thanks in advance
Anton Kruse

Hello Anton Kruse,
you need to use portal events for communicating between one iview to another. Refer the following documentation for portal events
http://help.sap.com/saphelp_nw70/helpdata/en/f6/7d6f4151dc5758e10000000a1550b0/frameset.htm
in your case,
the java component should raise a portal event whenever there is employee selection and the webdynpro component should register for this event and act accordingly whenever this event is raised.
BR, Saravanan

Similar Messages

Installing Java Add-In for an existing ABAP System -Error SQL compatibility

Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - Portugal

Hello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal

Installing the Java Add-In for an existing abap system

Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
Regards

I followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

Need access to Java SE 6 for use in CS4 in OS 10.8.5. (PS won't start without it)

Where can I reliably access Java SE 6 for use in CS4 in OS 10.8.5. Right now PS won't open without it ( I get a warning message saying to install Java SE 6 runtime. When I hit install, the result is no fle found.
Adobe has a dead download for related/similar archivel/vestigal plug-ins. Want a clean download to avoid malware.
Will it even work if I get a clean version. It should....I have CS4 running on another iMac with 10.8.5
If it won't work....what are the alternatives. I can't readily or meaningfully deinstall 10.8.5 and go back to 10.6.
All assistance appreciated.
Thanks.
Jerry

Have you tried from Apple? Java for OS X 2014-001
Benjamin

ECC user licenses issue for using Webdynpro ABAP in portal

Hi all,
If we want to use Webydnpro ABAP in our external facing portal which is being used by more than 20000 users, how do we manage the ECC licenses for all these users? It will be really expensive to have that many number of licenses in ECC (one for every portal user). Is there any other work around for this?
Any info on this will be beneficial.
Thanks,
Hari

I am not sure why you want to use WebDynpro for External Portal . As Webdynpro is resource intensive , I never saw client asking for this type of requirement. Are developing any prototype ?
In my experience ABAP webdynpro is more is used more for business packages and internal portals not for external portals. If you want to use this AWD for EEP Please see below link from SAP Help for pre-requisites
http://help.sap.com/saphelp_nw04s/helpdata/en/96/bdab419451db34e10000000a1550b0/content.htm
Last Step in above Link, this mentions that ABAP Webdynpro needs logon.
As other people mentioned there might be a good way of doing if you contact your SAP account executive to find out if there are any different types of licenses. But you end up in taking other extra licences which not acceptable solution for clients.
If you want to use WebDynpro for external Portal ( which is not at all suggested for external ) at any cost , better to go with Web Dynpro for Java which will not need any extra licences on R3.

ABAP Dictionary structure for use in ABAP Mapping

Hello, I'm creating an ABAP mapping class which requires me to use standard ABAP dictionary (table) structures (ex.MARA, KNA1 etc) for the mapping as the data coming into the mapping is in that format. I'm creating the ABAP class in the PI server and do not have table structures (MARA, KNA1 etc) in the dictionary in the PI server. What is the efficient way to create these structures (as Z elements) in the PI server's dictionary?
I have the XSD of these table structures. Can I import those XSDs into the ABAP dictionary in PI servers? If yes, how can it be done? Please help!

Yes you can import it as an external definition data and create the data type based on this XSD. Go through the link below for more information on the steps to import and how to use it.
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/frameset.htm

Best Practice for Use of ABAP in Customizing SRM and/or CRM

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Multiple selections for 'use my phone for calls' Jabber 9.2.4

Could someone look into this?
We have some users that are experiencing the following what shown in the screenshot.
Only the above option works and somehow the second selection (Mark Hattink) has no purpose.
I just can't figure out what's happening.
It's not happening to everyone who uses Jabber 9.2.4.
Note:
CUCM - 9.1.1.20000-5
Jabber for Windows 9.2.4
Only Cisco 8945 - dc-vel-8945-172 option works.. And the Cisco 8945 - Mark Hattink does not.
This is all on Windows 7.
Who knows this issue and can help me out.
Is this a configuring issue?
Before when we used CUCM 8.5.14900 there were no issues known from users.

Hi,
I'm experiencing the same issue on our CUCM 9.1.2.10000-28 & CUP&IM 9.1.1.30000-3: I have a Jabber for Windows client v9.7 that should only show 1 hardware phone, but it shows 2 entries. I checked the above and still we have 2 entries (also after clearing the Jabber cache). Also I tried another Jabber for Windows version (v9.6), but it always pulls 2 hardware phones in it's config.
Have you managed to get this solved? We use Cisco 8945 phones where end users log on via Extension Mobility. I noticed in Dependancy Records that we have an entrie in Extension Mobility Dyncamic, which shouldn't be the case because no end user is logged on, but it shows it in Dependancy Records... A bug?? And when the end user logs on an IP Phone, then we have twice Extension Mobility Dynamic entries... Not good since only 1 device is in use via Extension Mobility (multiple logins are disabled via parameter).
Greets,
David
Greets,
David

How to convert a .jsp to a .java/.class file for use in peoplesoft

Hi java/jsp experts,
I want to convert a .jsp to a .java/.class file. is there a tool available, please let me know if you have any pointers....
or can i do it manually:
these are a few lines that the .jsp contains, and i would like to translate this to be in .java/.class format:
<%@ page import="sun.misc.BASE64Encoder, javax.crypto., javax.crypto.spec."%>
<%@ page import="java.util.StringTokenizer" %>
<%@ page import="java.util.Map" %>
<%!
sb.append("<input type=\"hidden\" name=\"orderPage_serialNumber\" value=\"");
sb.append(serialNumber);
sb.append("\">\n");
return sb.toString();
%>
how can i translate the above import statements and html elements from jsp to java, please let me know.
Once i have the .java file created from the .jsp, I will compile .java to create the .class file and invoke the .class in peoplecode by using java apis available in peopletools.
Thanks in advance.

Is there a way convert a binary .exe file( compiled by
another compiler) into Java .class/.jar file ? Anyone
know of a free program that can do this?It's not possible. There are many decompilers and disassemblers for Java but nothing will take you from ANY binary to Java source. It would be the end of computing as we know it and the beginning of a new era -:)

Selecting for use with slide tool

Got FCE on Friday and decided to work through the manual (in the apparent absence of any video tutorials), got to the section about using the slide tool and am starting to scratch my head.
Can use the slide tool to grab and slide clips but am now trying to do so using numerical edits. The manual (page 486) says:
+If you need to slide a clip just two or three frames, using the mouse may be difficult. For precision edits, it is much less cumbersome to slide a clip numerically.To slide a clip in the Timeline using timecode:+
+1Select the Slide tool in the Tool palette (or press the S key twice).+
+2Select a clip in the Timeline, or hold down the Shift key to select multiple clips. You can also select noncontiguous clips using the Command key.+
I'm actually struggling to select a clip, if I click on a clip with the slide tool it's momentarily highlighted with a coloured outline but when I let go it doesn't stay selected, I can shift click on the clip and it will get selected but the timecode doesn't appear at the top of the time line window.
I feel a bit daft asking this, but after 20 minutes trying all sorts of things I'd rather look daft than waste anymore time. Anyone know what I'm doing wrong.

OK forget it, got it, sorry about that.

In options, the selection for "use my windows and tabs from yesterday" is Dimmed I want to know why?

I cannot set , in options, use my window and tabs from yesterday, because it is dimmed! I haven't been able to find why it would be dimmed.
I keep 5 tabs open all the time & it is becoming a pain to have to reset them all from bookmarks every time firefox is closed & reopened. just because I cannot set it to do that in options, because the selection is dimmed in options

Because you probably are using private navigation, go to Tool >>Privacy >>in the option Firefox will: change to Remember History, now you can change that option "When Firefox Start" to "Show my windows and tabs from last time"
*[https://support.mozilla.org/en-US/kb/startup-home-page-download-settings Startup Page]

Install Java Add-In for existing ABAP == 'First MSCS Node' step fails

I am in the process of installing the Java Add-In for an existing ABAP System.
I am doing the High-Availability Installation Services.
There are seven (7) steps:
1. Central Services Instance (CSC) Java Add-In
2. First MSCS Node
3. Database Instance Java Add-In
4. Additional MSCS Node
5. Enqueue Replication Server
6. Central Instance Java Add-In
7. Dialog Instance
Step #1 was completed successfully.
Step #2 (First MSCS Node) keeps failing with the following warnings/error:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:38:04.928
Execution of the command "cluster.exe RESOURCE "SAP BWP 00 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP BWP 00 Service':
Resource Group Node Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:40:29.085
Execution of the command "M:\usr\sap\BWP\ASCS00\exe\sapstartsrv.exe -u -q -s BWP -n 00" finished with return code 128. Output:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
ERROR 2011-11-02 07:40:29.210
FCO-00011 The step dCreateSecondNewSCSServiceWithVirtualHostName with step key |MSCS_A|windows|ind|ind|ind|0|0|SAPServices|windows|ind|ind|ind|9|0|dCreateSecondNewSCSServiceWithVirtualHostName was executed with status ERROR .

This seems to be an issue with the clustering solution. Please, refer to the following article link:
http://support.microsoft.com/default.aspx?scid=kb;en-us;281796
See if that helps
Edited by: David Fitzgibbon on Nov 2, 2011 2:18 PM

Cannot enable Java 1.6 (Java SE 6) for Applets

On my system (Leopard 10.5.7 - latest patches), Java for Mac OS X 10.5 Update 4 it seems to be impossible to enable Java 1.6 (aka Java SE 6) for use by applets in the browser. I moved the SE 6 to the top in the Java Preferences app.
In the Browser (both Safari 4 and Firefox 3), go to http://javatester.org/version.html or http://www.java.com/en/download/help/testvm.xml
to get the Java Version available to applets. It shows:
Java Version: 1.5.0_19 from Apple
On the command line we see that the right version is selected:
$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
This is a long standing problem and there is no fix yet. This basically prevents Mac Users from using Java Applets that require Java SE 6 / Java 1.6.

Richard is correct: Java 1.6 in Mac OS X 10.5 is only 64-bit and I know of no full 64-bit web browsers currently available. One person has complied a very rudimentary browser just for running 64-bit web applets, though:
http://www.ornl.gov/~t6p/Main/Utilities.html
Otherwise you can only run 64-bit Java apps as standalone, not as web applets.
Regards.

HT5651 are these updates for use with lion?

ARE THE JAVA UPDATES 2013 FOR USE ON LION?

mgmd22 wrote:
ARE THE JAVA UPDATES 2013 FOR USE ON LION?
If you also have Java SE 6 already installed, Software Update will provide you with Java for OS X 2013-001.

Retrieve Java Employee Selection for use in ABAP

Similar Messages

Maybe you are looking for