Return to List Processing From Business Object Method CTREQUEST.Display

I have a simple program which displays selected TRKORR (Transport/Correction) numbers in a list on the screen. I want to be able to double click on the number and inspect the contents of these items. 
The program is not pretty - its for my use only.
Anyway, the code below is tucked at the end of my program, and it works fine - double clicking will display the request. .
FORM SHOWCTS  USING  P_REQ.
  DATA : ThisReq      TYPE SWC_OBJECT.
  DATA : ReqObjectKey Like SWOTOBJID-OBJKEY .
  SWC_CONTAINER        REQCONTAINER.
  SWC_CREATE_CONTAINER REQCONTAINER.
  move p_req to ReqObjectKey .
  SWC_CREATE_OBJECT ThisReq 'CTREQUEST' ReqObjectKey .
  SWC_CALL_METHOD   ThisReq 'Display'   ReqContainer .
ENDFORM.
AT LINE-SELECTION .
  data l_req type TRKORR .
  move sy-lisel+29(20) to l_req . CONDENSE l_req NO-GAPS .
  perform showcts using l_req .
The problem is, when I exit from the CT Request, the program EXITs  . The desired behavior would be to return to my list processing.
How can I return to my list upon exiting the Request display?
Thanks...
...Mike

Hi,
Try command LEAVE TO SCREEN 0 instead of EXIT.
Thanks.
Ravi

Similar Messages

  • Want to know how to debug the Business Object Method called from CRM

    Hi all,
    I have to debug a Method of a custom Business Object. This is being called when a certain action is performed
    on the CRM  ( CIC0 screen). I can not see an option to set an external break point in the Program of the Business Object
    Method.
    This Business Object calls a standard SAP FM. I tried setting an external break point in that FM and tried executing that.
    But it  is not stopping there.
    Can any one please let me know how I can debug this when triggered from CRM?
    Thanks  in advance.
    Thanks & regards,
    Y Gautham

    Hi,
    I have tried checking the option 'IP MATCHING' option. I have given my user id and also the 'WEBUSER' as well.
    But still I am unable to debug the application.
    Can you please let me know if I am missing anything further.
    Thanks & regards,
    Y Gautham

  • Where can I find information on migrating from Business Objects 5 to XI R2?

    We want to migrate several Business Objects implementations - some of which are Business Objects 5 and some Business Objects 6 to consolidate them into a XI R2 environment.
    I have the document that describes migration from 6.x to XI R2 but what is the process for migrating from Business Objects 5. Do I need to migrate from 5 to 6 and then follow the 6.x to XI R2 migration?
    Any pointers to additional hints and tips on migration or how to estimate how much effort is involved would also be welcome.
    Thanks in advance for your help.

    Hi,
    Following are the detailed steps for migration via Import Wizard:
    1] Go to Start > Programs > Business Objects XI Release 2 > BusinessObjects Enterprise > Import Wizard.
    2] The Welcome dialog box appears. Click Next.
    Setting source and destination environments:
    3] In the Specify source environment dialog box, set the following:
    u2022 Source: Business Objects Enterprise BO 6.5.x.
    u2022User Name:
    u2022 Password: visor
    BOMain key
    Note: Do not check the Import Application Foundation contents option since you are not performing Performance Management migration at this time.
    Click Next.
    4] The Warning page appears. Click Next.
    Note: The source repository can store any file, not just supported agnostic documents. Since the BusinessObjects XI Release 2 architecture requires a plug-in for each file extension, it does not import unsupported files (for example, .zip files and as .svg documents used in corporate dashboards).
    5] The Specify destination environment page appears. Set the:
    u2022 Destination: Business Objects Enterprise BOXI R2
    u2022 User Name:
    u2022 Password:
    u2022 Domain key file to: Default drive: \Business Objects\BusinessObjects Enterprise XI R2
    Click Next.
    6] Select the types of objects you want to import in this stage of the importing process. At a later stage, you select the objects themselves.
    u2022 Select the option u2018Import universes u2018.
    Click Next.
    7] Import options for universes and connections dialog box appears.
    Select the third option: Import all the universes and connections that the selected Web Intelligence and Desktop Intelligence documents use directly.
    8] The Please choose a merge scenario dialog box appears. Select I want to merge the source system to destination system and check the automatically rename top-level folders that match top-level folder on the destination system option.
    Click Next.
    9] The Incremental Import dialog box appears.
    You may need to import some objects more than once from the source repository to the destination repository.
    In this situation, you have the following update options:
    u2022 Overwrite object contents
    You select the types of objects for which the content overwrite applies:
    u2022 Documents (including dashboards and analytics)
    u2022 Universes
    u2022 Connections
    When you re-import an object, it will completely overwrite and replace the matching object (and its associated files) that you imported earlier.
    u2022 Overwrite object rights
    When you re-import an object, its associated security rights will overwrite the rights of the matching object you imported earlier.
    If you decided not to import security in the Security Migration Options dialog box, then the Overwrite object rights option is not relevant, and is therefore not available.
    If you don't select any overwrite options, the matching object in the destination repository will not change when you try to import it again.
    Note: This dialog box appears only if you select update as the import scenario.
    Click Next.
    10] Select the specific universe
    Click Next
    11] Information Collection complete dialog box appears.
    Click Finish
    12] Import Progress dialog box appears.
    Click Done
    Hope this helps !!
    Please revert in case of any queries.
    Regards,
    Deepti bajpai

  • How to find the WhereUsed List for a Business Object Event?

    How to find the WhereUsed List for a Business Object Event?

    Can anybody let me know how to get which
    Whereused  function will get the data from
    different Werks in multi-level?
    Any sample program please!!!

  • Calling BSP Application from Business Object?

    Hi,
    Can any one tried to call BSP Application from Business Object for showing in the Portal.
    I have the following Scenario:
    1. BSP Page: User will input the Date and Submit to store in the Database. and in this page the Workflow will be truggered and a Work item will be sent to the Next Level User.
    2. When he executes the Work Item it has to trigger the BSP Application and has to show in the Enterprise Portal.
    All this has to happen in the Enterprise Portal.
    If any one knows how to triggere from business object, please let me know.
    Thanks & Regards
    Sumanth

    Hi Vijay,
    Thanks for the information. Its long back i was working on this, but not successful,
    Now the similar requirement i need to develope in R/3.
    I checked the mentioned class in R/3 4.7, This class is not available. I hope this is only in CRM because of PC-UI.
    Any Suggesions how can i achieve this execution of BSP.
    In one of the document i saw the Business Object BUS1006 as an example but i could not locate the way to reutilize the similar way.
    Thanks & Regards
    Sumanth

  • How to migrating from Business Objects to OBIEE

    Hi,
    I have one query is it possible migrating from Business objects to OBIEE ? if, yes could you tell me any one regarding this requirement.
    Advance Thanks.

    Hi,
    I don't have any documentation link , we need to design rpd based on BO Universe and BO reports functionality.
    first observe what are the physical tables used in universe those physical tables improted into physical layer of obiee rpd give physical joins. In BMM layer design hierarchies, calculations and outerjoins all these things done in BMM layer thats it.
    Regards,
    Naresh

  • Access 9i OLAP from Business objects

    can anybody help me to access 9i OLAP from Business objects, by any document or demo or step by step instructions , as i'm new in this field
    thank you

    For testing and POC purposes you can access the bridge software here:
    ftp://ftp.businessobjects.com/pub/incoming/UBSetup_For_Ora_10104.zip (please type the entire path including the file name, you cannot navigate through this location)
    For users who are using the BO 6.5.1 in particular, they need to install the following patch, otherwise the created universe won't work:
    ftp://ftp.businessobjects.com/pub/incoming/patch_bobj_651_HF_497.zip (necessary for BO 6.5.1 ONLY, do not install this patch for other BO versions )

  • Error while accessing Method from Business Object

    Hello Experts,
    I have created a business object ZBUS7051 by using BUS7051 as a Supertype. I have crated a method GET_DATA in ZBUS7051. If I use BUS7051, Method GET_DATA in a standard task, getting a message that Method GET_DATA not defined for object type BUS7051.
    Why I am getting this error? Is there way I can use BUS7051-GET_DATA instead of ZBUS7051-GET_DATA.
    The workflow triggering event is BUS7051 u2013 CREATED. In the workflow binding, system is showing a warning that u2018Conversion from BO.BUS7051 to BO.ZBUS7051 can cause data-related errorsu2019. How to fix this? Please let me know.
    - Krishna.

    Thanks to everyone.
    I have delegated the custom business object to super type BO 7051. I triggered the workflow using T.Code: SWUE, BO: BUS7051. Event: CREATED. But the workflow is resulted an error as given below.
    Problems occurred when generating a mail
    Error '9' when calling service 'SO_OBJECT_SEND'
    Work item 000000503335: Object BUS7051 method WAIT_1_MINUTE cannot be executed
    Object does not exist
    Object does not exist
    Object does not exist
    Variables of the work item text cannot be generated
    Syntax error in expression &NOTIFICATION.NUMBER&
    (This is a Wait Step, Created in ZBUS7051, Method: WAIT_1_MINUTE)
    Since the delegation has done, I can say BUS7051 - WAIT_1_MINUTE, instead of ZBUS7051- WAIT_1_MINUTE. Is it correct?
    Could some one please let me know, How to fix the above issue?

  • Calling Business objects Methods from ABAP program

    Hi All,
    Can anyone please tell me the procedure to call methods of business object(Ex: BKPF) from an ABAP program. My requirement is to check the existence of a object key by using the method EXISTENCE CHECK from BKPF. Please help

    Here is an example from the SAP documentation.
    [http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c5/e4ad71453d11d189430000e829fbbd/content.htm]
    Cheers
    Graham Robbo

  • Calling Methods from Business Object BUS2032

    Hi all,
              Is it possible to call methods from the Business Object BUS2032.
       If so, how can it be done?? 
    Regards,

    Hi Marv,
    you sure can. Here is an extract from the SAP Help. I found it at http://help.sap.com/saphelp_46c/helpdata/en/c5/e4ad71453d11d189430000e829fbbd/frameset.htm
    <b>Programmed Method Call</b>
    Call (fictitious) method Print of object type VBAK (sales document). The method receives the parameters Paperformat and Printertype as input.
    * Call method Print of object type VBAK
    * Data declarations
    DATA: VBAK_REF TYPE SWC_OBJECT.
    SWC_CONTAINER CONTAINER.
    * Create object reference to sales document
    SWC_CREATE_OBJECT VBAK_REF 'VBAK' <KeySalesDoc>
    * Fill input parameters
    SWC_CREATE_CONTAINER CONTAINER.
    SWC_SET_ELEMENT CONTAINER 'Paperformat' 'A4'.
    SWC_SET_ELEMENT CONTAINER 'Printertype' 'Lineprinter'.
    * Call Print method
    SWC_CALL_METHOD VBAK_REF 'Print' CONTAINER.
    * Error handling
    IF SY-SUBRC NE 0.
    ENDIF.
    Cheers
    Graham

  • Business Object Method is not Visible

    Hi Experts,
    I have created a custom business object and created a method for it in t-code SWO1.
    I am trying to use this object's method in one of workflow tasks. I entered the business object and I do not find the method in the method's list.
    I released the business object, still I do not find the method in pull up menu. Am I missing anything?
    Thanks!
    Babu.

    Hi Babu,
    Is this question being answered. If YES then please marked this question as answered.
    I do have some other solution. Hope this will work.
    Well, if you are trying to directly use the method of the Custom BOR in any of the custom task, then check whether the method have been marked as Instance independent?
    Double click in the method.
    Check the box and tick it for the Method to be instance independent.
    Generate it once again and check...
    Reward points if found useful.
    Regards.
    Abhijit.
    [email protected]

  • WF Question: Call Transaction From Business Object Not works

    Hi Frinds
    I need some help
    in Business Object ZBUS2012  I have a method that run a report (ALV)
    in the PO nubmer I have a drill down to me23n with parameter BES (EBELN)
    when I click the PO me23n Opened Empty without the PO Number.
    If i try to run the report not from the BO its woks fine.
    it's opened me23n with the right PO Number.
    What can Be The Problem ?
    Thanks in Advance

    Hi Kobi
    Are you passing the parameter from the business object to the method of you ALV report, if in doubt, please post your method code?  Most likely this is what is wrong.  The correct way to reference the PO number within the method is
    object-key-purchaseorder
    Then test using SWO1 to ensure you method is correct before calling through workflow.
    Regards
    Gareth

  • SAP WF Business Object methods call our of SAP world

    Hi Guys,
    I want to know if the Methods of SAP workflow business object are always only be used in tasks in the workflows or they can also be called from out of sap world??? If yes then how???
    Seconly does BAPI property of the method (method property where we can provide BAPI function module) has to do with remote call for this method?? What exactly is the use of BAPI property of any method in SAP workflow business object??
    Regards,
    NK

    Hi Naeem,
    Generally we are using SAP BOBI as  best BI adhoc, canned  Webi report  and customizing Dashboard , Crystal report preparation in  Complex Billing report by using Web intelligence , Crystal report  and Digital dashboard  is best for KPI analysis , predictive analysis for Project , Management also .
    Their  flows are very simple by using specific SAP recommended Specific tool for any MIS , BSCS billing BI reports preparation that we are following in specific domain based Project.
    BAPI reporting is part of ABAP reporting , that you can  flow in Mr Rob statement .
    Regards
    Asish

  • How to invoke Application Module method from entity object methods

    Hi,
    We have an existing Application Module which provides some validation logic. We are using OperatingBinding or getting the Application Module instance from the bindings and then invoking the app module methods in the view controller project.
    But in our current scenario, We need to invoke the application module method from the setAttribute method in the entity object when ever an entity attribute value is changed . I believe we can call createRootApplicationModule method to create application module instance. But this may lead to performance overhead.
    Can you please suggest, if there is any alternative to invoke the application module method inside the business components.
    What is the best way to create

    We have a pricing service, which was developed as a separate application. We need to invoke the pricing service with the change in certain attributes of the entity object and update some of the attributes of the current entity object. At present we are handling these calls to the pricing service in the ui layer in the valueChangeListener.
    But we would like to move this service call into setAttribute method as we are unable to prevent the call to the service if the model validations fail. I am looking for the best possible approach for invoking the service calls from the entity objects.
    Thanks and Regards,
    S R Prasad

  • Returning an array type from a local method in Web Dynpro Java application

    Hi,
    In my project, we have a requirement to display 18 rolling months along with the year, starting from current month.
    How I am going to approach is that I will get the system date and get the current month and send the month and year value to a local method which will return 18 rolling months along with the year.
    But, when I tried to create a new method there is no option to return an array type. It was greyed out.
    So, we can not return an array type from a method from Web Dynpro for Java application?
    If so, what is the alternative and how am I going to achieve it?
    I will appreciate your help!
    Regards
    Ram

    HI
    You can create new methods in
      //@@begin others
      private ArrayList MyMethod(){
           // ** Put your code here
           return new ArrayList();
      //@@end
    Other option are create a context node with cardinality 0...n with one or more attributes, and in your method create the needed registers into this node. To read this values, you only need to read your context node.
    Best regards
    Edited by: Xavier Aranda on Dec 2, 2010 9:41 AM

Maybe you are looking for