Reverse images in Pseudo delta

Hi All,
I have a generic extractor which fetches data from ECC based on pseudo delta.
I am using type 0 in the date field to bring the delta records to BI.
Problem.
when I load a record to bw for example  a PO today and today the PO is deleted in ecc  and when I load the data tommorow to the bw, the record needs to get deleted from DSO and CUBE.
To identify this I have a field 'deletion indicator' which i mapped to 0strno info object in the DSO.
Reverse images are identified by the indicator 'R' but deletion indicator is marked as 'L'.
How will the system identify the reverse image in this case?
Please le me know the solution for this.
Points assured.
Regards
Joga

Ian, after looking at what SAP suggested 'Get Delta Only Once,' this should work for your scenario:
Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
-Alex

Similar Messages

  • What is diff B/W dalta image and reverse image

    What is diff B/W dalta image and reverse image
    Edited by: Philip Eller on Jun 3, 2008 8:44 AM
    Edited by: Philip Eller on Jun 17, 2008 9:18 AM*

    Please post your question to the BW forum.

  • How do I do a reverse image search on my ipad 4

    Hey anyone out there who can help,,,I'm trying to find a way to do a reverse image search on my ipad , but there seems to be no camera icon like I have seen suggested in previous searches...is there a option to turn this icon on ...or an extra app I need to get ,like google+,...thank you for your time answering this for me

    Confusedinpa wrote:
    I can't make the Google reverse image search work on my ipad. But you can download a free app called UNRAVL. Good luck.
    Thanks but I don't know what a "reverse image search" is let alone have any interest in doing one. And, I would hope that, after a year the OP has resolved their issue.

  • TS3274 Somehow I triggered a reverse image and I can't find how to reset it.

    Somehow I triggered a reverse image and I can't find how to reset it.

    If everything appears to be in negative then try triple-clicking the home button - if that works then you can change what a triple-click does via Settings > General > Accessibility > Triple-Click Home. If it doesn't then go into Settings > General > Accessiblity and turn White On Black 'off'

  • Pseudo delta with ABAP or OLAP variables

    Hey gurus!
    Since I have to post my first question at SDN one day, it may better be now! I'm rather new to SAP BI, therefore your help is requested:
    I'm currently implementing a pseudo delta, a full data load from ODS to ODS and subsequently ODS to Cube. The data requested should consist of yesterdays records, which was relatively easy in SAP BW 3.5.
    Since it is not possible anymore to, and I quote, choose one of the following selections in the Type (Variable Changing of Selections with Background Processing) entry column from the Data Selection tab page (numbers 0-7, 0 is required), I can now only solve it with creating another OLAP variable or ABAP coding.
    Is there anyone that can give me some advice or provide me with some basic ABAP coding which selects data from 'yesterday?'
    Your help is appreciated!
    Regards,
    Joost

    Thanks for your reply Pom!
    I'm not sure where to insert the '0' as type in my case. I've created a data transfer process instead of an infopackage now, but when setting up my filter there is nowhere to select the type. Or do I have to create an 'old fashioned' infopackage?!
    Your help is appreciated, please provide some directions.
    Regards,
    Joost

  • How to make a reverse image of a photo

    How can I make a reverse image of a photo using iPhoto?

    There's a 3rd party image editor that can losslessly flip or rotate photos for you: Xee 2.2.
    OT

  • Reverse image search on Google Image possible from iPad/iPhone?

    With iOS 6, we can now upload photos from iPhone/iPad to tineye.com, to do a reverse image search. I can't get it to work, though, for a reverse image search on Google Image (which I think is more comprehensive than tineye). Is it possible?

    Confusedinpa wrote:
    I can't make the Google reverse image search work on my ipad. But you can download a free app called UNRAVL. Good luck.
    Thanks but I don't know what a "reverse image search" is let alone have any interest in doing one. And, I would hope that, after a year the OP has resolved their issue.

  • Partiotning, pseudo delta, LUW

    Hi gurus,
    could you please tell me
    how PSA partiotining done. need steps to do it. How is cube partioitning done .need steps.
    what is pseudo delta and where is it done , please tell me the steps to do it
    What is LUW abbriviation, and whai is its functionality in BW and R/3
    thanks in advance
    regards

    Hi Chaudary,
    PSA Partition will be done automatically also in the transaction RSCUSTV6 you could set Packet size and Partition size.
    And you can partition InfoCubes using two characteristics –calendar month (0CALMONTH) and fiscal year/period (0FISCPER). The special feature of the fiscal year/period characteristic (0FISCPER) being compounded with the fiscal year variant (0FISCVARNT) means that you have to use a special procedure when you partition an InfoCube using 0FISCPER.
    You use partitioning to split the total dataset for an InfoCube into several, smaller, physically independent and redundancy-free units.
    http://help.sap.com/saphelp_erp2005/helpdata/en/0a/cd6e3a30aac013e10000000a114084/frameset.htm
    Partitioning infocube :
    http://www.crmexpertonline.com/archive/Volume_01_(2005)/Issue_01_(October)/v1i1a1.cfm?session=
    PPT:http://www.cs.utk.edu/~huangj/CS594S02/infovis.ppt
    Hope The above two links (article and ppt) helps you to understand ..
    Pseudo delta is used with generic extractors, to make a a generic extactor delta enabled ...In RSO2 after creating the datasource at the top of the screen you have "Generic delta" icon, click on this & in the following screen you need to select the field on which the delta is to be performed along with the type of delta i.e Numeric or time stamp or on 0calday.
    Save the datasource & relicate it in the BW system.
    A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
    LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
    An LUW begins
    o each time you start a transaction
    o when the database changes of the previous LUW have been confirmed (database commit) or
    o when the database changes of the previous LUW have been cancelled (database rollback)
    An LUW ends
    o when the database changes have been confirmed (database commit) or
    o when the database changes have been canceled (database rollback)
    Points = thanks,
    Regards
    Message was edited by:
            samara reddy

  • Pseudo delta load problem

    Hi all
    I have schedule a pseudo delta for HR Training, input for the package is as 01.08.2008 to 30.08.2008 but if my package does not have any record for that month then it will not delete my request for the month so I have 30 request in the cube. If I get a single record then it delete all request of that month
    So pl. guide me how I can overcome this situation , so even if there is no record for entire month it should delete my previous request.
    Thanks in advance
    Charudatta

    Hi Kotha123:
       Take a look at SAP Notes below.
    745445 - "CRM-BW: Incorrect partners extracted in the delta".
    1178613 - "CRMBW Sales: Created date differs in delta from init upload".
    987142 - "CRM BW:Incorrect data from data source 0CRM_QUOTATION_I".
    793986 - "Extractor:Status fields not filled in parallel processing".
    Regards,
    Francisco Milán.

  • Reversed image on monitor. How can I set it right?

    My monitor went to reversed image. My two-year old son "worked" at it while I was away. Can not repair it. I didn't find the answer in manuals. Can you me give a piece of advice? Thanks in advance.

    I am sorry, I found the answer myself. Thanks to CaptKevMan
    May be it will be useful for someone else: [command]-[opt]-[ctrl]-[8] is the hot key combo to switch between black on white and white on black.
    Thank you once more

  • Hwo can I print in reverse image?

    I have a HP Photosmart 7510 series printer and want to reverse print an image. I need this for printing the image on to transfer paper that will then be used to iron on to material. How can I do this? I dont' see a reverse image option.

    Hi,
    As mentioned above, we can FLIP before sending image to printer. I couldn't find this option on my printers (one of them is an HP 7510) therefore I use this first (only 5 secs)
    You can download this free software from:
          http://www.irfanview.com/main_download_engl.htm
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP L7780 Prints Reversed Images

    I have a one year old Sony Vaio computer with Windows Vista.  Recently, Windows updated my operating system with Service Pack 3.  Since then, my printer (HP L7780 All-in-One) sometimes prints reversed images.  I do not know if this is caused by Service Pack 3 or not.  My printer operates wirelessly.  Does anyone have any suggestions as to how I might fixthis?  Thanks.

    I am having the same problem that you're describing with an HP L7590.  I am using a Dell XPS 1330 with Windows 7 -- and it just cropped up last week.  The L7590 still works fine with my Dell Latitude 430 using XP.  Ideas, anyone?

  • Pseudo Delta Document

    Hi,
    We are planning to implement Pseudo Deltas for FI-SL transactional data. I don't know how to set Pseudo Deltas for FI-SL in R/3. Could any one send me the Pseudo Delta document.
    Any one help is really appreciated.
    Thanks,
    Kiran

    Hi,
    Psuedo deltas are usually set up by putting in selection criteria in the infopackage selection of the full infopacakge.
    Or you can write routines to filter out specific data and then load that.
    Cheers,
    Kedar

  • External iSight - Reversed Image

    My external iSight produces a reversed image when switched on. Is there a solution or do I have to send my iSight in for service?
    I have tested the iSight with different firewire cables on my new Mac Mini and my old iBook G4 and I get the same result - reversed image. I know I can flip any photos taken when using something like PhotoBooth or iPhoto, but it is the video that is important when I am using Skype.
    Any help would be appreciated.
    Peter Schofield

    Hello
    Thanks for the answer, but there still is a problem of mirror images.
    When I take a photo using the iSight and PhotoBooth without autoflip turned off, then the photo taken is reversed. When autoflip is on there is no problem.
    If I use the video record function in PhotoBooth then the movie recorded is reversed even no matter whether the setting of autoflip is on or off.
    Regards
    Peter Schofield

  • What is the diff between additive,update ,delete,reverse images

    what is the diff between additive,update ,delete,reverse images with an examples.

    Hi,
    You can read about it here:
    http://help.sap.com/saphelp_nw04/helpdata/en/84/81eb588fc211d4b2c90050da4c74dc/content.htm
    Hope this helps...

Maybe you are looking for

  • Ipod not recognized by windows or itunes

    OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Wi

  • ?Is it possible to create a javafx class without extending Application class ? If yes, how

    Is it possible to create a javafx class without extending Application class ? If yes, how ?

  • How to update ordered list having a constraint

    hi friends, I have to update a column for all the records in the table with a unique contraint ex-- select rec_no from tablename; 9 8 7 6 5 now i have to update this like select rec_no from tablename; 8 7 6 5 4 but when i am doing update tablename se

  • How to add new group entry in Cisco Vpn using powershell

    I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test' $username = 'TestUser' $userPassword = ConvertTo-Sec

  • Out-of-gamut colors

    I am working on something that will only be seen on a computer screen, and I want to use out-of-gamut colors, but I can't find a color profile that will allow it. Is there any setting I can use that will allow me to use out-of-gamut colors? Thanks!!