RF transactions, can I use tabl econtrol

Hi! All,
I am developing custom RF transactions for character based SAP Console.
Can I use table control or should I stick to step loop and write the code for scrolling. I beleive step loops are obsolete but I dont know if I can use table controls in character based screens.
Thank You,
-Priyanka

I think you need to use STEP LOOPs only.
Regards,
Naimesh Patel

Similar Messages

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

How can I use table headers only without using rows.

how can I use table headers only, without using rows and without leaving the space.
If anyone could say me how to paste the pic in this questions, I would have shown it.
The flow of view is in this way
{Table header(table on top of table)
column header1___|| column header2__ || column header3__ ||}
<b>Here is the blank space I am getting, How to avoid this space?this space is of one table row height</b>
{Contents column1 || Contents column2 || Contents column3 || (This is of other table below the uper table)}
I am using scroll for the content part of table only.
So I am using two tables.
I am using NW04.

I did the possibles you explained, but couldn't get rid off the space.
Any other solutions?
I am keeping the header static and the content columns scrollable.
I have used two tables one to display header above and the other to display only the contents.
I have put the contents table in scroll container.
And the header table in transperent container.
Thanks and Regards,
Hanif Kukkalli

Can I use table function inside Dynamic query ?

Dear Gurus,
I have following code
DECLARE
TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
QUERY_STRING VARCHAR2(4000);
BEGIN
OtherNoList := CRITERIA_LIST_TABLE();
SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
FROM DUAL
CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
'SELECT C1,'||
'C2 '||
'FROM TAB1 ,'||
'TABLE( '||
'CAST (OtherNoList AS CRITERIA_LIST_TABLE) '||
') OTHRNOS '||
'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
EXECUTE IMMEDIATE QUERY_STRING;
END;
Can I use Table function inside dynamic query.
Thanking in advance
Sanjeev

Try:
DECLARE
TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
QUERY_STRING VARCHAR2(4000);
BEGIN
OtherNoList := CRITERIA_LIST_TABLE();
SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
FROM DUAL
CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
'SELECT C1,'||
'C2 '||
'FROM TAB1 ,'||
'TABLE( '||
'CAST (:OtherNoList AS CRITERIA_LIST_TABLE) '||
') OTHRNOS '||
'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
EXECUTE IMMEDIATE QUERY_STRING using OtherNoList;
END;p.s. not tested
Amiel Davis

What transactions can be used to receive a pallet of documents for retention purposes that is not an inventory item?

What transactions can be used to receive a pallet of documents for retention purposes that is not an inventory item?

Petr,
Thank you for the question, I think it is easier to explain my current process which I hope you can translate into SAP EWM processes.
I currently have a SKU description of THIRD PARTY STORAGE, this SKU is always a quantity of 1 for stock check purposes. This SKU can be many things but not inventory (in the sense of not a component or finished good). The pallet can be documents for retention, samples for QC, trial parts etc. This pallet can be received onto the WMS without a Purchase Order number, the SKU is set up to be able to be received 999999 times before a re-set is necessary. The SKU has a putaway algorythm for the high bay warehouse and is sub-zoned into an aisle.
I hope this clarifies what I'm asking for in SAP.
Regards
Chris

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

In Smartforms can i use table type which has table inside table

Hi ,
I would like to know whether in Form Interface can we declare table type which has a table and one of its field is again a table( Nested tables)..
Can we declare like that ?? Need your suggestions please...
Rgds.,
subash

Yes, we can.
Check Smartform LB_BIL_INVOICE
Importing parameter IS_BIL_INVOICE TYPE LBBIL_INVOICE
Regards,
Naimesh Patel

File Transactions - Can I use JTA or JCA

Hi,
I am a novice to JTA or JCA.
My requiremnents are such. I have to read some information in an object and based on which I appnd this information into a particular file. There are about 50 files that I have to deal with.
Now, suppose an error occurs in either one of the files, I have to rollback all the file manupilations that I had done. How do I do this?
Is this kind of functionality possible with JTA? If not what else can I use?
Cheers,
--- Chandan !!!!!!!!

Hi,
For this to work with JTA, you need to get an XAResource implementation for each file. This instance is either programmed by you, or by a JCA vendor for file systems (not sure if there are any).
The idea would be to make the editing of the file actually work on a COPY of the file, created at opening time. If you do commit on the XAResource handle, then the copy replaces the original file. On rollback, you just delete the copy. However, you also need to have locks in order to handle concurrent edits.
Guy

--urgent Can I use table data to create a dynamic drop down menu?

Hi,
I am asked to investigate the possibility of using APEX to create a table driven dynamic drop down menu? The deadline is tomorrow but I have spent quite a bit of time but still have not any clue. Can any one have such experience to point me a way to focus on?
Many thanks.
Jennifer

Thanks you very much for the help Kevin.
Currently my company is using htp.p style to create web app and using the dynamic menu in a similar way as you explained. Now they want to move to Apex and still keep dynamic menu functionality. After reading your response and research I have done I think I can embed it into Apex application by creating the similar table and PL/SQL package and let Apex to call the PL/SQL package when the application is first called. However may I ask you a question about how to call such pl/sql procedure in Apex? .
The current application has the following URL, from which the procedure pkg_main.print_menu is called and html home page with dynamic menu is displayed.
Http://app server:1234/pls/applicationname/pkg_main.print_menu?p_new_window=N
BUT what about the Apex? The Apex URL format is like the following, where 11563 and 1 is application id and page number. Assume that 1 is home page, but HOW the procedure is called, from WHERE?
http://apex.oracle.com/pls/apex/f?p=11563:1:3397731373043366363
Jennifer

How can I use PowerPivot tables like Excel tables -- printing, etc.?

I can't seem to find any information on this anywhere, and even more surprisingly, no one else seems to have even asked this question...
How can I use tables I create in the Excel PowerPivot window in the same ways I use tables that are in ordinary Excel worksheets, to accomplish tasks such as printing? I am able to use the powerful capabilities of PowerPivot to produce tables with precisely
the information I need for reports -- connecting data from multiple tables/sources, filtering, etc. -- but then there doesn't seem to be any way to actually print what I'm seeing, nor can I seem to access cells in these PowerPivot tables from Excel worksheets.
If a PowerPivot table is conceptually an Excel table with additional power in terms of pulling in data and relating it, it would seem appropriate that all the power of Excel could be brought to bear on these PowerPivot tables, but on the contrary, the available
operations are limited. if, instead, a PowerPivot table is more correctly viewed as a data source that Excel worksheets can connect to, that would be fine, and indeed, one
can use a PowerPivot table as a data source -- except it can't be brought into an Excel worksheet as an ordinary Excel table, unlike most other data sources.
I hope I'm missing something really obvious, and that someone can point out what it is. Thanks.

Kirchh,
When PowerPivot was first designed, the decision was to integrate closely to Sharepoint to allow for team sharing. We are constantly evaluating customer feedback to add more features, and this has been one of the feedbacks we have received. We will consider
supporting this in the future but with no gurantee.
Chu
-- This posting is provided "AS IS" with no warranties, and confers no rights
I'm not questioning why PowerPivot is closely integrated with SharePoint. I'm asking why connecting to the PowerPivot model from within Excel was intentionally blocked by Microsoft, when all the functionality to do so appears to be present.
Is creating an OLE DB connection in Excel to PowerPivot as $Embedded$ supported?
No support. It was originally designed for SharePoint. This changed with Power Pivot for Excel 2013 (it's packaged with it). Originally the scope (in 2010 through 2012) was that it was for SharePoint users. So it became more obvious through that to market it
toward all Excel users. Thus the recent changes.
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Can i use java only for database transaction with vb as a front end

Hello All.
I am sorry,i don't know whether this location is the correct location to post my question or not
I have developed one application using complete vb only. That is completly desktop appliation and not suitable for centralized database. Is there any facility to keep my front end as same (vb application) and for the database transaction can i use jdbc? Is there any possibility to do that like View is vb based application and the database connectivity is only jdbc
If my thought is wrongplease execuse me.
thanks in advance
sowjanya

Sounds like a really bad choice even if it was possible.

Need to display Internal table records on screen without using table contro

Hi Experts,
I have a requirement to display internal table on screen which is having three columns (Material no, Serial No and quantity).
But I can't use table control as it is not supported by hand held devices.
They are going to use this transaction on hand held devices.
Thanks In advance.
Gaurav

You should be able to use the good old STEP LOOP processing for this... create your three fields in the row then convert them to a STEP-LOOP.
You can look up in the help how to work with STEP-LOOPs if you are not familiar with it. It was the way to manage table-like information before the age of table controls

How can i log transaction codes, programes and tables used by a user?

Hi everyone,
i need to log transaction codes, programes and tables a user has used in a certain time. how can i trace that and is it possible with timestamps?
i tried something with the badi workload_statistic but thats not what i need. is there a simple function which can do that or is this really much more complicated?

In SE13 there is an option to log table changes for a table.
If you search for "SCU3" you will find plenty of information on this. Also search for "RECCLIENT" (without the "/") and you will find some more specialized threads.
Cheers,
Julius

Can oracle temporary tables be used with distributed transactions?

Hello,
Does anybody know if temporary tables are supported with distributed transactions?
We use a temporary table to store query results and see no problems when the JDBC driver (Type 2 or Type 4) is used with local transactions. The temporary tables are set for transaction-level data persistence (delete rows on commit).
When we switch to JDBC/XA driver we occasionally get ORA-14450 error (java.sql.SQLException: ORA-14450: attempt to access a transactional temp table already in use).
Many thanks...

I have been able to use temporary tables on remote databases, so I don't think that it is forbidden. Of course, I'm not using JDBC so that might be a problem.
The other thing that occurs to me is that you are doing something other than DML with the table e.g. trying to drop it. If that is the case you should re-read the documentation and remind yourself of the purpose of temporary tables.
Cheers, APC

Can we use single DB Adapter for multiple tables

Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharma

Hi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads,

RF transactions, can I use tabl econtrol

Similar Messages

Maybe you are looking for