RFC and JMS

Hi,
I am with a 2 part asyncronous scenario as shown below:
JMS -> XI  -> receiver RFC : Sender RFC  -> XI  -> JMS.
In the above case, I am calling the sender RFM within the Receiver RFM.
when i execute the scenario. The first part runs successfully .
Also, the Receiver RFM calls the sender RFM correctly.
but somehow the 2nd part is not executed.
how can i get it working?
Thanks
Raghu

Hi Aamir,
I am not getting anything..
I have debugged the FM.. I get a proper output there
but from sxmb_moni, message monit, i confirmed that the second part of the scenario is not executed at all..

Similar Messages

  • Rfc-xi-jms scenario

    I have a rfc-xi-jms scenario. A message is triggered from ECC. HOw can I check whether
    message is send from ECC ?? I mean ....I want to check in ECC system ?? Is there any Tcode
    to see the success message or payload in ECC ?? In SXMB_MONI I am not able to see the RFC messages.
    Regards
    kumar

    >we can see proxy messages in ECC system through sxmb_moni right ??
    You are Right,
      In Proxy  there is no protocol conversion  hence it might  reflect in the Sxmb_moni.
    > In ECC system why can't we see the messages in sxmb_moni ??  For  RFC..
    The protocol conversion happens and it is taken care by the adapters to XML Message.
    Regards
    Agasthuri Doss

  • What is the diffrence between BAPI and RFC and business object

    Hi Experts,
    Can anybody tel me what is the diffrence between RFC and BAPI , and also what is ther relation with business object?
    Thanx in advance.
    Nilesh Hiwale

    Hi,
    BAPI's are associated with Business Objects and also they are RFC enabled.
    But RFC's are the FM's which can be called from external systems, those FM's can be used in many places based on the applications..
    Check these Links
    whats the difference between BAPI and RFC??
    Diff. Between BAPI and RFC
    Regards
    Kiran

  • Using socket and JMS protocol in the same logic for OSB

    Hi frnds,
    In my organization...the only communication protocol used is "socket" protocol. However, I want to use JMS protocol to process incoming messages. Can somebody help me figuring out how to go about it.
    Using some nice OSB blogs, I am able to create the JMS connection factory and JMS queues in weblogic. And that works fine when I select the communication protocol as JMS while creating the BS and PS.
    What should be my message flow when the communication protocol used is "socket" for both BS and PS.
    salil

    Hi,
    Make the BS as JMS and the PS as socket, in the PS's flow do a route for the BS... Then if an external call is made to the PS via socket, it will send a messages to a JMS queue...
    Hope this helps...
    Cheers,
    Vlad

  • Problem with EJB and JMS - Failed to obtain/create connection

    hello ejb and jms programmers,
    My problem is my topic MDB keep on retrieving the same message when there is a database connection failure. Maybe somebody could help me how to prevent to retrieve the same data?
    Given:
    - I purposedly turn off the pointbase database because im testing my error handling.
    - Im using SJSAS 8 as my application server.
    - My message Driven Bean of topic type.
    - Im using CMP for my entity bean
    Here is the scenario of whats happening - step by step:
    1. A separate application publishes a message to JMS queue server
    2. My MDB retrieves this message and do some processing then inserts a record (transaction history) in my database
    3. But my db is turned off or down
    4. My MDB sends a successful processing reply to the JMS queue server
    5. Then i noticed that my server.log keeps on growing so when i opened it, the record was not inserted and printed the stacktrace below "RAR5117 : Failed to obtain/create connection. Reason : javax.transaction.SystemException" (complete stacktrace below)
    6. I understand the cause of the stacktrace is because the DB is turned off. But what i dont understand is that my MDB keeps on reading the same message. Since my MDB is of topic type, isnt a topic MDB supposedly reads a message only once???
    So my questions are:
    1. how do i handle insert database error?
    2. how can i stop my MDB from processing the same message?
    3. any better suggestions?
    Thank you in advance :)
    leigh
    *** more complete stack trace ***
    [#|2005-01-09T15:35:57.097+0800|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=17;|JTS5041: The resource manager is doing work outside a global transaction
    javax.transaction.xa.XAException
         at com.pointbase.xa.xaException.getXAException(Unknown Source)
         at com.pointbase.xa.xaConnectionResource.start(Unknown Source)
         at com.sun.gjc.spi.XAResourceImpl.start(XAResourceImpl.java:162)
    [#|2005-01-09T15:35:57.167+0800|SEVERE|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=17;|RAR5027:Unexpected exception in resource pooling
    javax.transaction.SystemException
         at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:185)
         at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:360)
         at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:303)
         at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:115)
    [#|2005-01-09T15:35:57.177+0800|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=17;|RAR5117 : Failed to obtain/create connection. Reason : javax.transaction.SystemException|#]
    [#|2005-01-09T15:35:57.227+0800|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=17;|RAR5114 : Error allocating connection : [Error in allocating a connection. Cause: javax.transaction.SystemException]|#]
    [#|2005-01-09T15:35:57.237+0800|SEVERE|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=17;|EJB5071: Some remote or transactional roll back exception occurred
    com.sun.jdo.api.persistence.support.JDODataStoreException: JDO77006: SQL exception: state = null, error code = 0.
    NestedException: java.sql.SQLException: Error in allocating a connection. Cause: javax.transaction.SystemException
    FailedObjectArray: [[email protected]5ac]
         at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.getConnectionInternal(TransactionImpl.java:1444)
         at com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.getConnection(TransactionImpl.java:1339)

    Hi annie,
    Wherever you are handling database transactions,
    you'd not be able to create a Connection if database
    is closed (I think you mentioned turning off the
    database) then at this condition, you should
    certainly throw a System level exception and stop all
    processing with some meaningful flow to indicate a
    failure (like display message on UI). Even
    network problems are handled by exceptions... so I
    don't see a reason why you didn't wrap it in the
    first place.
    Anyway, try handling specific exceptions rather than
    the general Exception... this will give you a better
    idea of what to do in case of an exception.Yes i know this. I am practicing this in my non-j2ee server applications. But the j2ee app im making, i just pass the db url in the descriptor and the app server automatically creates the connection for my app. So where would i put exception handling?
    2. how can i stop my MDB from processing the same
    message?Guaranteed delivery is not supposed to stop
    processing. It will continue to process the message
    after certain intervals till the message is
    delivered. You shouldn't deliver it at all, if you
    are able to detect that the database is off
    The problem here is that my MDB automatically retrieves the message from the JMS queue server. Im not the one retrieving the messages manually.
    My assumed behavior of topic MDB is once the a certain MDB retrieves a message it will not retrieve the same message anymore.
    thank you in advance.
    leigh

  • Monitoring of remote system's Transactional RFC and Queued RFC

    Hello,
    In our production system, in rz20- CCMS monitor templates- Communication-Transactional RFC and Queued RFc- outbound queues- Queues otherwise not monitored we can see blocked queues for each client.
    System is connected to solution manager and we wish the central auto reaction is implemented in solution manager
    However i am unable to find Transactional RFC and Queued RFC for the remote system, they exist only for solution manager itself
    Tell me how can i do the central monitoring

    Hello,
    First you need to check with your Landscape in solman in order to monitor any kind of activities to do so pls follow these steps.
    Go to SMSY in solman under Landscape components>Product systemsselect you satellite system example SAP ECC.
    On the main screen you will find client for which you have generated RFC connection. Please check though connection are working fine, Go to edit mode and try to click on generate button there will be a pop-up, which gives a clear picture of RFC connection which already exists, and you can also re-generate this RFC connection by clean it up when you re-generate pls select under Actions after generation assign RFC dest for system monitoring.
    But make sure there is no project impact on this RFC, like they are not using any logical components and already have some projects running on this RFC connection.
    I would advise you to first you the option of assign and check RFC button which is next to generate icon.
    Regards
    JUDE

  • Compare creation of Datasources and JMS Queues : SAP vs (Weblogic/Websphere

    I am used to creating JDBC Datasources and JMS Queues on Weblogic/Websphere thru their Admin applications.
    Can someone compare/contrast that process to that on SAP's netweaver ( either using NWA or Visual Administrator).
    Thanks

    Hi Parag,
    For the process of creating JDBC datasources and JMS resources @ SAP NetWeaver you can refer to the documents here on SDN and help.sap.com, and compare that process for yourself, thus not being influenced by others' biased or unbiased opinions.
    For NetWeaver 04 and 04s these would be:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm">JDBC Connector Service</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/cf4e71c46cdb4da31153be96c5389f/frameset.htm">JMS Connector Service</a>
    For the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/javaee5">Java EE 5 Edition</a>:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7bb9751d-0e01-0010-febd-c3adce2c408c">Working with Database Tables, DataSources and JMS Resources</a>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a> -> section "Application Resources Management" (pages 89-104)
    Hope that helps!
    Your feedback/findings are very welcome!
    -Vladimir

  • File to RFC, and through RFC response i am trying to trigger the Mail adapt

    Hi All,
    Right now i am doing File to RFC, its working fine but now the requirement is when xi connect to ftp and picks the  file need to send one success mail after the file pickup and data sent to BW system again i need to send one mail and also error alerts to inbox.
    Till now i am not using BPM, can we do this without BPM pls let me know
    now i am trying to achieve this in File to RFC, and through RFC response i am trying to trigger the Mail adapter.
    or else  i need use only BPM pls share  the steps which i need to be configure.
    Am i correct or pls suggest me some idea to achive this and also pls share some smaple ones in BPM .
    Thanks in advance
    Venkat

    With BPm, follow this:
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    Instead of receiving the response in file, use mail adapter
    Regards,
    Prateek

  • RFC and Logical System names

    Hello......is it necessary to have RFC and Logical system name for the connected system to be identical?Is there any explanation behind this if thats true....

    Hi Gaurav,
    It is recommended, but not mandatory, right, Muthuraman?
    The system uses some transactions to determine which RFC will be used for the communication between one system and another, for example, in transaction 'Define backend systems' in SPRO, you can define that the current SRM client has an ECC backend system named X and the RFC destination for this X system is Y (not necessarily the same name).
    Regards,

  • How to enable RFC and how to use it in Report..please tell its very urgent

    Dear Techie's,
    Please tell its very urgent..
    How to enable RFC and how to use it in Report. ??
    Virendra

    hi,
    pls chk any of these links.
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    Checkout !!
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    rgds
    Anver

  • What is the Difference between AQ adpater and JMS adapter??

    What is the Difference between AQ adpater and JMS adapter in BPEL11g??
    In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

    Go for AQ when using Oracle Advanced Queueing (the database stuff).
    Use JMS when using JMS (in memory of file queues)
    hth,
    Peter Paul

  • Exception handling in rfcs and bapis

    exception handling in rfcs and bapis

    Hi Jayakrishna,
    In General , there are non execptions in BAPIs, because of the reason, that the exception raised in a SAP envoronment may not mean anything for a non SAP initiator. All the exception situations would only fill the return table(TYpe BAPIRET2 or something like that). If you read that table after the call to the bapi, you can understand what has gone wrong.
    Regards,
    Ravi

  • EJB and JMS (newbie)

              I'm looking to deploy what is essentially a message-broking service. A bean that
              will invoke a helper class which will dequeue messages.
              Basically I want to set up our consumer to invoke a handler, which will invoke
              a bean that provides message-broking services as described above.
              The handler that invokes the bean is to be called from the WLSConsumer. The problem
              is that I'm now getting a java.io.NotSerializableException on the WLS consumer.
              This is probably a really obvious question, but how can I get around this?
              My structure is:
              Consumer >> Handler >> Bean >> Helper
              The consumer is to call the handler, which uses the bean's helper class to pull
              a message off the queue, and do some intermediate processing on it.
              We're using an older version of J2EE, on Weblogic 5.1.
              Which classes do I need to implement Serializable?
              Thanks in anticipation.
              

    Hi Seoh!
    Both stateles and JMS can participate in a single transaction, but because two
    resource managers are being used they must use the 2PC protocol, In oreder to
    use the 2PC u need to get the license from the bea and after that u need to enable
    the 2PC in WLS through admin conbsole. But remember that transactions in stateless
    beans cant span across multiple method incocations
    Thanx,
    Aravind

  • Content Conversion - JDBC and JMS

    Can we use File Content Conversion with JDBC and JMS ?

    Hi,
    How To Use the Content Conversion Module in JMS Adapter - https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&
    check this for JMS content conversion:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Check the how to guide provided by prabhu and also this link on the XMl To TeXtCoversion Module,
    http://help.sap.com/saphelp_nw04/helpdata/en/44/748d595dab6fb5e10000000a155369/content.htm
    Ref How To Use the Content Conversion Module in JMS Adapter -
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&
    See this weblogs which was shown with examples:
    How to use SAP's WebAS J2EE's JMS Queue in Exchange Infrastructure
    Sync/Async communication in JMS adapter without BPM (SP19)
    Async/Sync Communication using JMS adapter without BPM (SP 19)
    Exploring JMS and SAP-XI JMS Adaper
    Configuring the sender JMS adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
    Configuring the receiver JMS adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
    Check JMS Adapter section of this blog by Sravya:
    Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
    Also information related to Provider-specific settings are available
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
    Plz do refer the following threads:
    JMS Content Conversion - no CR/LF
    Message (Data) getting lost after JMS Content Conversion(Sender)
    Message (Data) getting lost after JMS Content Conversion(Sender)
    Message (Data) getting lost after JMS Content Conversion(Sender)
    Regards,
    Vinod.

  • Can we open a URL link from an RFC and access the data in the link.?

    Can we open a URL link from an RFC and access the data in the link.
    I have the following scenario.
    I have a URL link and it opens a KM folder in the Portal server and I need to put a PDF file in that KM folder
    Can we do that with the help of an RFC, can we deal with Links in RFC, is there any such FM??
    Regards

    >
    SAP LEARNER wrote:
    > Can we open a URL link from an RFC and access the data in the link.
    >
    > I have the following scenario.
    >
    > I have a URL link and it opens a KM folder in the Portal server and I need to put a PDF file in that KM folder
    >
    > Can we do that with the help of an RFC, can we deal with Links in RFC, is there any such FM??
    >
    > Regards
    I guess you are trying to connect from the R3/ECC to the Portal Server.
    Are these two systems in the same network? Do you have usernames (valid and fully authorized) in both systems? What is the OS on which these two systems are housed?
    Please provide these details to proceed further.
    Regards
    Sabu

Maybe you are looking for