RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

Similar Messages

Inqmy resource adapter for SAP with Bea Weblogic Server

          Hi everybody,
          Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
          It works well with INQMY server, but with BEA I'm getting a lot of problems creating
          the connections.
          Thanks in advance.
          Xavi.


All,
          Here are the steps we (used for internal testing) had to perform to get
          IN-Q-MY adapter for SAP to work with WebLogic:
          The wli.adapter.inqmy.sapr3.spi package contains extensions to the
          In-Q-My J2EE Connector Architecture classes to overcome some limitations
          in the base implementation classes. To get around these issues, we had
          to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
          R3ConnectionFactory classes.
          * The javax.resource.spi.ManagedConnectionFactory implementation
          does not over-ride the equals and hashCode methods correctly. This
          causes problems with WLS 6.1.
          * There is a bug in their javax.resource.spi.ConnectionManager
          implementation for non-managed uses of the adapter. Consequently, their
          adapter cannot be used in a non-managed scenario.
          * The javax.resource.cci.ConnectionFactory class does not support
          the getConnection() method that does not take any arguments (it throws a
          null pointer exception).
          I am attaching the classes discussed above.
          Cheers,
          Chris
          Torsten Friebe wrote:
          > Hi,
          >
          > does anybody know where to get a trail version - if one exists - of IN-Q-MY
          > application server or the resource adapter?
          >
          > Thanks, regards
          > Torsten
          >
          > "Xavi" <[email protected]> schrieb im Newsbeitrag
          > news:[email protected]...
          >
          >>Hi everybody,
          >>
          >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
          >>
          > server
          >
          >>?
          >>
          >>It works well with INQMY server, but with BEA I'm getting a lot of
          >>
          > problems creating
          >
          >>the connections.
          >>
          >>Thanks in advance.
          >>Xavi.
          >>
          >>
          >
          >
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.cci.Connection;
          import javax.resource.cci.ConnectionSpec;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          import com.inqmy.r3adapter.R3ConnectionSpec;
          import com.inqmy.r3adapter.R3ManagedConnectionFactory;
          * Extends the In-Q-My implementation to allow for getConnection() with no
          * connection spec, i.e. use the default configured connection parameters.
          public class R3ConnectionFactory
          extends com.inqmy.r3adapter.R3ConnectionFactory
          implements com.bea.connector.IProxyMarker {
          private R3ConnectionSpec m_cspec;
          public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
          throws ResourceException {
          super(cm, mcf);
          String strClientNumber = mcf.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
          String strLanguage = mcf.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
          String strUserName = mcf.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
          String strPassword = mcf.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
          m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
          public Connection getConnection(ConnectionSpec connectionSpec)
          throws ResourceException {
          if (connectionSpec == null) connectionSpec = m_cspec;
          return super.getConnection(connectionSpec);
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          * Extends the In-Q-My implementation to over-ride the
          * allocateConnection method to return a CCI connection vs. a ManagedConnection
          public class R3DefaultConnectionManager
          implements ConnectionManager, Serializable {
          public R3DefaultConnectionManager() {}
          public Object
          allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
          throws ResourceException {
          ManagedConnection mc = mcf.createManagedConnection(null, cri);
          return mc.getConnection(null, cri);
          package wli.adapter.inqmy.sapr3.spi;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.security.auth.Subject;
          * Extends the In-Q-My implementation to get around some problems encountered
          * while running on WebLogic:
          * <ul>
          * <li>Must over-ride default implementation of equals and hashCode method</li>
          * <li>Needed to provide my version of the CCI ConnectionFactory</li>
          * <li>Needed to provide my version of the default ConnectionManager for the
          * non-managed scenario use case</li>
          * </ul>
          public class R3ManagedConnectionFactory
          extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
          private int m_iHashCode;
          transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
          public R3ManagedConnectionFactory() {
          super();
          java.rmi.server.UID uid = new java.rmi.server.UID();
          m_iHashCode = uid.hashCode();
          public Object createConnectionFactory() {
          // need to install our own default connection manager because In-Q-My
          // version causes a ClassCastException in CCI ConnectionFactory
          // getConnection
          return createConnectionFactory(new R3DefaultConnectionManager());
          public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
          throws javax.resource.ResourceException {
          // need to check for null on the ConnectionRequestInfo object because the
          // In-Q-My R3ManagedConnection ctor does not check for null
          if (cri == null) cri = getDefaultConnectionRequestInfo();
          return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
          public Object createConnectionFactory(ConnectionManager connectionManager) {
          // need to supply a connection factory that can deal with getConnection
          // that does not take a ConnectionSpec
          try {
          return new R3ConnectionFactory(connectionManager, this);
          } catch (javax.resource.ResourceException re) {
          re.printStackTrace();
          throw new java.lang.IllegalStateException(re.getMessage());
          com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
          throws javax.resource.spi.IllegalStateException {
          if (t_cri == null) {
          String strClientNumber = this.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
          String strLanguage = this.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
          String strUserName = this.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
          String strPassword = this.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
          t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
          return t_cri;
          public boolean equals(Object obj) {
          if (obj == null) return false;
          if (obj == this) return true;
          if (!this.getClass().isInstance(obj)) return false;
          R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
          return compare(getClientNumber(), mcf.getClientNumber()) &&
          compare(getLanguage(), mcf.getLanguage()) &&
          compare(getUserName(), mcf.getUserName()) &&
          compare(getPassword(), mcf.getPassword()) &&
          compare(getServerName(), mcf.getServerName()) &&
          compare(getSystemNumber(), mcf.getSystemNumber());
          protected final boolean compare(final Object obj1, final Object obj2) {
          if (obj1 == obj2) return true;
          if (obj1 != null) {
          return obj1.equals(obj2);
          } else {
          if (obj2 == null) {
          return true;
          } else {
          return false;
          public int hashCode() { return m_iHashCode; }

Sample JAVA code using Resource Adapter for RFC Connections

Hi Java Knowledgeable Ones.
I have successfully deployed the SAP Netweaver J2ee Engine "Resource Adapter for RFC Connections to ABAP Systems" to my Web Application Server. Now I need to develop a JAVA application that would utilize this deployed resource adapter. The resource adapter specifies the SAPClient, UserName, and password. I am thinking that the JAVA code to invoke this connection would therefore not need to provide this information as it should be available in the resource adapter.
Do you have sample code that you could send to me showing how to do this?
Thanks,
Kevin

Hi Kevin,
this is actually no good style! You should not open the connection with the adaptor knowing the password. Usually it should work via a connection that uses only basic rights and the user has already authenticated and is using his security ticket.
For security handling see:
http://help.sap.com/saphelp_nw04/helpdata/en/61/f8bc3d52f39d33e10000000a11405a/frameset.htm
Regards,
Benny

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

Issues with CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA [developer edition]

Hi,
When I want to suscribe to the CAL Free Solution - SAP BPM and Operational Process Intelligence on SAP HANA, on the Terms and conditions page, even if I scroll down, the button "I accept" is not available.
Do you have any tips ?

I am trying to download the SAP BPM and Operational Process Intelligence on SAP HANA [trial edition] - AWS version and get a security error.
Any ideas where we can get a 90 demo version of SAP PO/PI that will work with AWS? I am trying to refresh myself on PI7.4?

Archiving: experience with Oracle's Archive Adapter for SAP

All,
Does anyone have experience to share about Oracle's "Content Database Archive Adapter for SAP Applications"?
Thanks
Guenther

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

Oracle Adapter for SAP that supports Integration with SAP 6.0??

Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi Bhushan

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

Volumes and Qtrees set up for SAP and Oracle

Hi Gurus
I Need your help Please
I need to get Volumes and Qtrees set up for SAP and Oracle.
I found a document from NetApp that helped a lot about the structure.
But what I donu2019t know and canu2019t find anywhere is sizing for the volumes and Qtrees.
I really need some guidelines on sizing these below:
FlexVol saplog
/usr/sap/SID
/usr/sap/trans
/sapmnt/SID
/home/SIDadm
/oracle/SID
/oracle/SID/origlogA
/oracle/SID/origlogB
/oracle/SID/oraarch
/oracle/SID/sapreorg
/oracle/SID/sapbackup
/oracle/SID/saparch
FlexVol sapdata
/oracle/SID/sapdata1
/oracle/SID/sapdata2
/oracle/SID/sapdataN
FlexVol mirrlogs
/oracle/SID/mirrlogA
/oracle/SID/mirrlogB
Thanks and appreciate your help

> I have gone through the Inst Guide and I was surprised to see only 50 MB for Oracle software directory ?
Where did you read that?
> The sizing given in Installation guide is for typical setup or do we need to size as per our requirement ?
The sizing give there is for the initial system setup. It does not contain customer specific requirements.
The usual process is:
- you contact your hardware vendor
- you use http://service.sap.com/quicksizer together with him and fill in the data
- the hardware vendor will offer you the storage and the machines for the setup
- the vendor configures with you the storage and the necessary filesystem layout based on that sizing
Each customers setup is different and requires the experience and knowledge from the respective hardware vendor how to set up the system so it performs well.
You can follow the suggestions given here, this will be enough for the initial setup but the system will grow. This is not taken into account in the installation guide because it's customer specific.
Markus

I am locked out of my iPad, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. PLEASE HELP ME!!!

I am locked out of my iPad 2, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. I can't loose all of my work. PLEASE HELP ME!!!

Hi ebby,
Here are the instructions for a disabled device - hopefully you have sync'd with your computer before now?
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!

I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

On my home PC, I operate with Windows XP and use Outlook Express for my email. Can my Outlook Express address book be imported by my IPhone4

On my home PC, I operate with Windows XP and use Outlet Express for my email. Can my Outlook Express address list be imported to my IPhone4

Not directly; OE is not supported by iTunes. You need full Outlook. Address Book in later versions of Windows is supported.

My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

My iPad from school is locked, I haven't yet synced it with my laptop and it is disabled for an hour and there is definately a number 7 in it....HELP!!!

Sorry, no one here can help you remember your passcode.

Does anyone know about theAdvantco and Kate REST adapters for SAP PI?

I'm looking for any info I can find on a comparison between theAdvantco and Kate REST adapters for SAP PI?
Has anyone used one or both before?
Thanks,

Hi Gabriel - I haven't worked on Ka Te's adapter but have a look at the below blog for the advantages of using Advantco's rest adapter...
Integrating REST Services on PI
I don't see any major differences but below something i noticed in the release notes of Advantco's adapter.
Endorses Open Data Protocol (OData), a Web protocol for querying and updating data using Web technologies such as HTTP, Atom Publishing Protocol (AtomPub) and JSON to provide access to information from a variety of applications
Reference : Advantco Unveils SAP® Certified REST Adapter for SAP NetWeaver® | Advantco SAP NetWeaver Solutions

Troubles with the creation of New Custom Adapter for NW 7.1

Hi guys !!!
I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
[Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
note : 1004000
I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed:           0
Deployed with warnings:           1
Failed deployments:                0
~~~~~~~~~~~~~~~~~~~
1. File:C:Users
maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
     Name:PI71_AF_myFirstCustomAdapter_ver_2.0
     Vendor:sap.com
     Location:SAP AG
     Version:7.1007.20090310105326.0000
     Deploy status:Warning
     Version:NEW
     Description:
          1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
     1.An AS Java service, which is providing a container, is stopped or not deployed.
     2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
     at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
     at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:Warning
I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
Antonello

Hi,
the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
     at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
     at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
     ... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
     at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
     at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
     ... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
     1.An AS Java service, which is providing a container, is stopped or not deployed.
     2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
     at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Similar Messages

Maybe you are looking for