Rfc to soap (webservice)

Hi,
I have a RFC in R3 sending out employee# in TABLES parameter to XI. XI needs to call an external webservice, for each of these employees and get their name.
RFC will collect the names in the TABLES parameter(second column) and send response back to R3. (This way i can keep R3 -XI- R3 traffic to single message).
Appreciate help to develop this scenario. Would BPM be useful in this scenario....i would like to use it too.
Thanks,
Ram

Hi,
If you alredy BAPI with you then you no need to go for Proxy,you can build customized BAPI to pull the data from tables,then use RFC adapter to retrive the data from tables and send it to web service using SOAP adapter use synchronous mode,Webserice send the response and update the same in R/3.(i never use RFC sender as sync)
else use ABAP proxy in sender side,it will work for you.
no need to go for BPM.
Regards,
raj

Similar Messages

RFC-to-SOAP webservice using HTTPS

Hi experts,
I have a RFC-to-SOAP (sync) and the URL of the webservice is using HTTPS. I'm not the owner of the webservice.
Encountered these errors
- for sender comm :
com.sap.aii.af.ra.ms.api.DeliveryException: Peer sent alert: Alert Fatal: illegal parameter
- receiver comm :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Peer sent alert: Alert Fatal: illegal parameter: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
We are not using certificate authentication so I don't think that's the cause.
Have checked that the https is running ok for ABAP but I don't think that got anything to do with the errors. Is there something wrong with SSL setting for J2EE? If yes, how may I check?
Are there some parameters to be set up? In the RFC sender comm & SOAP receiver comm, I do not find any special settings for https.
I have read this link : http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm. Is it necessary to set the Exchange Profile Parameters? My BASIS colleague is now checking it.
Thanks for reading and will appreciate any advice!

Thanks Prateek for the quick reply!
Re HTTPS certificate, do you mean the cert for my XI server or the cert from the web service?
I have tested calling the web service using SOAPUI and it works fine without using the cert given by the web service (which is expired anyway)...

Testing between XI - SOAP(WebService)

Hi,
I am doing scenario R3 (Rfc) - > XI - >SOAP(Webservice). Now R3 system is not available, i want to test the data flow between the XI and SOAP(WebService).
I have tested <b>Webservice</b> with XML Spy , witch is working fine.
Now i want to test Between XI and SOAP(Webservice). Can any one help me is there any way to test between these two systems for time being.
thanks,
dhanush.

Hi,
I hope you might have already executed this Scenerio when R3 is Up..Right ..If so... Use that Pay load and paste in in Component monotoring..use test tab and send the message after pointing the right interface and it's namespace.
Regards
Agasthuri Doss

R3 (RFC Asynch) -- XI --- SOAP (webservice Synch)

Hi Experts,
           My scenario is :R3 (RFC Asynch) > XI <-> SOAP(webservice is synch)
Step1:-   R3 sends the data webservie(SOAP) via XI.
Step2:-   Webservice returns the response to XI, But R3(RFC) does not need the resoponse.
how to handle the webservice response in XI.
do i need to use BPM as this scenario is R3(RFC synch) > XI <--> Webservice(soap, synch). Can anybody help me out how to design this scenario.
Thanks,
Siva

So then all u need is to create a async inbound MI. Also the WS should be configured in a way that it sends a HTTP 200 with a SOAP envelope with an empty content for successful delivery.
Refer the below from the SOAP adapter FAQ;
Receiver Asynchronous Calls
Q: What are the correct receiver options for asynchronous calls?
           A: The processing mode of the receiver is determined by the message that reaches the receiver. If you are sending a message with some quality of service, to provide this service of quality to the server, your must make sure two things. First, your receiver channel must be configured to pass the XI message ID to the server. Second, your web service must check duplicates using this message ID.
Q: What should my web service return to the adapter for asynchronous calls?
           A: Currently, the receiver adapter expects an HTTP 200 with a SOAP envelope with an empty content for successful delivery. Any other response will result in a XI system error and triggers retries of the message. When you want to check duplicates, you should configure your receiver channel to pass the XI message header information to the server.
           Prior to SP11, a SOAP fault resulted in the application or system error, depending on whether the SOAP fault contained a detail child element or not. This behavior contradicted the communication model. Therefore, it has been changed so that the adapter generates the system error for any SOAP fault in asynchronous calls.
           When you want to check duplicates in your web service, you should configure your receiver channel to pass the XI message header information to the server. When your web service indeed find a duplicate, assuming that the previous message was simply lost, your web service should return an HTTP 200 with an empty SOAP envelope.

R3 (rfc-sender) - XI - Webservice ( soap-receiver)

Hi,
I am getting below error whenever webservice(target system) is unavailable.
HTTP 404 Not Found
Then RFC got failed in R3, due to this error in XI
R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice.
I am getting this error to my mail box as i have configured ALERTS. i do not want to change existing RFC.
is there any chance to send response to R3 even webservice is down, please can any one suggest.
Thanks,
SIva
Edited by: Siva Grandhi on Jun 18, 2008 1:12 PM

Hi siva,
check this blog on HTTP errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
May be the URL you have given in SOAP at receiver adapter is wrong.Check that once.
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Thanks,
Vijaya.

R3 (rfc-sender) - XI - Webservice ( soap-recever) Synch : error handlng

R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice down.
Pleae help me out on this.
Thanks,
Dhanush.

Hi,
Normally, the Web service should provide a fault message back to XI and the RFC should also have an exception defined that will trigger a fault message mapping and that way the application error is sent back to R3.
But if the web service does not provide u with a fault message then XI will trigger the System Error back to R3.
The functionality of checking the DB status and propagating meaningful errors to XI as fault messages should lie with the web service.
Thanks
Vikranth

RFC - XI - SOAP ERROR.

I get a difficult error now, following is the error.
my scerio is rfc -> xi -> soap.
http://90.3.9.11:7001/axis/DocumentService.jws?wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:intf="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:message name="exportFileBySapIDRequest">
<wsdl:part name="userID" type="xsd:string" />
<wsdl:part name="mySingleID" type="xsd:string" />
<wsdl:part name="sapID" type="xsd:string" />
</wsdl:message>
- <wsdl:message name="exportFileBySapIDResponse">
<wsdl:part name="exportFileBySapIDReturn" type="xsd:string" />
</wsdl:message>
- <wsdl:portType name="DocumentService">
- <wsdl:operation name="exportFileBySapID" parameterOrder="userID mySingleID sapID">
<wsdl:input message="impl:exportFileBySapIDRequest" name="exportFileBySapIDRequest" />
<wsdl:output message="impl:exportFileBySapIDResponse" name="exportFileBySapIDResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="DocumentServiceSoapBinding" type="impl:DocumentService">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="exportFileBySapID">
<wsdlsoap:operation soapAction="" />
- <wsdl:input name="exportFileBySapIDRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://DefaultNamespace" use="encoded" />
</wsdl:input>
+ <wsdl:output name="exportFileBySapIDResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://90.3.9.11:7001/axis/DocumentService.jws" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="DocumentServiceService">
- <wsdl:port binding="impl:DocumentServiceSoapBinding" name="DocumentService">
<wsdlsoap:address location="http://90.3.9.11:7001/axis/DocumentService.jws" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Design **************************************
DT_exportFileBySapIDRequest
--> exportFileBySapIDRequest
     -> userId
     -> mysingleId
     -> sapId
DT_exportFileBySapIDResponse
--> exportFileBySapIDResponse
     -> exportFileBySapIDReturn
exportFileBySapIDRequest(Message Types)
exportFileBySapIDResponse(Message Types)
MI_RFC_TO_Webservice (Synchronous Inbound)
exportFileBySapIDRequest
exportFileBySapIDResponse
MM_RFC_TO_Webservice_Req
Z_XI_FI_MAILTEST <----> exportFileBySapIDRequest
MM_RFC_TO_Webservice_Resp
exportFileBySapIDResponse <-----> Z_XI_FI_MAILTEST.response
IM_RFC_TO_Webservice
Z_XI_FI_MAILTEST     MI_RFC_TO_Webservice
Configuration ************************************
Communication Channel
sender : SAP_Sender_RFC_SEP
receiver : RFC_TO_Webservice
              target url : http://90.3.9.11:7001/axis/DocumentService.jws
sxmb_moni Trace ************************************
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sscxidev:8001</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 90.3.9.13</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - MYS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) MYS MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping BA9D2B14DB953699A6F72BB0C992416E</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping CAB00A010BF111DBCC73F1B85A1E0C79</Trace>
<Trace level="1" type="T">Interface Mapping http://xi.mySingle.draft.send IM_MYS</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_MYS_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_MYS_ completed. (executeStep() of com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">http://xi.mySingle.draft.send.MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Channel found: - MYS - FS_MysEmpty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://sscxidev:50100/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Async processing: skip mapping of response</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks.

Have you cheked this blogs?
If you havenot,
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

RFC to SOAP Interface - Problem in Request Message Mapping

Dear All,
We are working on RFC to SOAP Scenario i.e. pulling out data from an WebService from SAP via PI.
In Request Message Mapping, when the wsdl file is uploaded as Target Message, the wsdl request shows the nested elements like below.
<Request>
   <Request_New>
      <PAR1>xyz</PAR1>
      <PAR2>123</PAR2>
   </Request_New>
</Request>
But the desired Request should go like below.
<Request>
   <PAR1>xyz</PAR1>
   <PAR2>123</PAR2>
</Request>
Hence it gives an error saying that the tag Request_New does not exist.

Dear All,
Our target webservice cotains multiple methods.
The every method contains its corresponding request, response and SQL ecxeption as messages.
In case of request structures, every method (except crmPaymentReceived) contains more than 1 root element.
So while calling those methods having more than 1 root element, the additional header tag will always appear(not avoidable) in the request coming from SAP PI.
For Example,
Request Structure for method u2018isLoginIdExistu2019 (having more than 1 root element)
<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing">      -
>>>>> u201CThis Header tag will always appear u201D
<isLoginIdExistin0>asp</isLoginIdExistin0>
<isLoginIdExistin1>1</isLoginIdExistin1>
</ns1:isLoginIdExistRequest>
</soap:Body>
</soap:Envelope>
For this method, we get the error(saying that ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing" does not exists).
Request Structure for method u2018crmPaymentReceivedu2019 (having only 1 root element)
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd=http://www.w3.org/2001/XMLSchema-instance xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<ns1:crmPaymentReceivedin0 xmlns:ns1="http://netpricing">false</ns1:crmPaymentReceivedin0>
</soap:Body>
</soap:Envelope>
For this method, we get the success response.
I tested their wsdl URL in XMLspy and wizdal(a wsdl testing tool), it shows request in the format having only root elements and not the header tags.
But header tags will always appear when header tag contains more than 1 root element.
Can anybody suggest me how do I tackle this?
Thanks in Advance.

Error in Interface Sync RFC-XI-SOAP

Hi,
I have an interface RFC - XI - SOAP Sync.
The error appears only in PRD environment and is intermittent error.
Follow the message error in sxmb_moni:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Security.SecurityException: The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions. ---> System.Security.SecurityException: Requested registry access is not allowed. at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName, Boolean useMutex) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName) at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() --- End of inner exception stack trace --- at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception) at mServices.WebServices.mServices.CancelServiceOrderList(OrderTypeCancelTO[] orders) --- End of inner exception stack trace ---</SAP:AdditionalText>
Could you help me?
Thank a lot.
Maicon.

> {quote:title=Rosa Maicon wrote:}
> Hi,
> I have an interface RFC - XI - SOAP Sync.
> The error appears only in PRD environment and is intermittent error.
> The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions.
This looks like a permission error for the user role provided in production. try sending soap request from web client tool and see whether you get the same error.
Check whether you have all the permissions required and also check whether there is WS security in the production environment.
Regards,
Pavan

RFC to SOAP

Hi all,
What is Web Services and explain RFC to SOAP scenario step by step.
Thanks

Hi Anil,
> What is Web Services
Check this links
http://www.w3schools.com/webservices/ws_intro.asp
http://searchsoa.techtarget.com/sDefinition/0,,sid26_gci750567,00.html
>RFC to SOAP scenario step by step.
Check this below links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Regards
Ramesh

RFC to SOAP Scenario -- Delivery Exception

Hi All,
I am working on RFC to SOAP scenario.
On executing a program in the SAP system, the system is throwing a dump stating "com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML".
I feel that the error is because of the response not being sent back by the webservice. On executing the webservice independently, it is working fine i.e. sending back the response.
Can anyone suggest the possible reasons for this error and what needs to be done to rectify this?
Thanks,
Ravi Kiran

the return from the Web service must have been an HTML(may be an error page or something)...What kind of authorization does this WS look for ?
Pls check these threads...
SOAP Receiver Adapter Proxy Settings
Receiver SOAP Adapter Error: invalid content type for SOAP: TEXT/HTML

RFC TO SOAP ASYNCHRONOUS

Hi all,
My scenario is rfc to soap asynchronous. when i am sending data from rfc it is showing success in sxmb_moni and in RWB.
but it is reaching to third party webservice but it is not taking the data. then it is showing following error in SXMB_MONI response what was the issue
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="HTTP">ADAPTER.HTTP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP 415 Unsupported Media Type</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and the version are PI 7.1, and third party webservice is Oracle 11g and weblogic server 10.3.2.0
and my next question is in same scenario
I checked using TCP Gateway PI to third party webservice .it is showing following error
This is posted data
POST /AdvancedMeteringInfrastructure-UtilitiesDeviceERPSmartMeterBulkCreateRequest-context-root/UtilitiesDeviceERPSmartMeterBulkCreateRequest_OutPort?wsdl HTTP/1.0
*Accept: /*
Host: 172.16.5.211:7002
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
content-id: payload-a3368e536e4311dfa3dc00237d5e14c0(at)sap.com
content-type: application/xml
Content-Length: 1662
SOAPACTION: "http://sap.com/xi/IS-U/Global2/UtilitiesDeviceERPSmartMeterBulkCreateRequest_Out"
<?xml version="1.0" encoding="UTF-8"?>
<ns1:UtilitiesDeviceERPSmartMeterBulkCreateRequest xmlns:ns1="http://sap.com/xi/SAPGlobal20/Global"><MessageHeader><ID schemeID="Device" schemeAgencyID="www.infotech.com">4446364534314343</ID><UUID schemeID="Device" schemeAgencyID="www.infotech.com">DF6E41CC-79E7-81F1-B9A3-0013725B3FAB</UUID><CreationDateTime>2010/06/02 T18:07:42</CreationDateTime><TestDataIndicator>true</TestDataIndicator><ReconciliationIndicator>true</ReconciliationIndicator><SenderBusinessSystemID>SLD_B001</SenderBusinessSystemID><RecipientBusinessSystemID>SLD_B002</RecipientBusinessSystemID></MessageHeader><UtilitiesDeviceERPSmartMeterCreateRequestMessage><MessageHeader><ID schemeID="Device" schemeAgencyID="www.infotech.com" schemeAgencySchemeAgencyID="001">4446364534314343</ID><UUID schemeID="Device" schemeAgencyID="www.infotech.com">DF6E41CC-79E7-82F1-B9A3-0013725B3FAB</UUID><CreationDateTime>2010/06/02 T18:07:42</CreationDateTime><TestDataIndicator>true</TestDataIndicator><ReconciliationIndicator>true</ReconciliationIndicator><SenderBusinessSystemID>SLD_B001</SenderBusinessSystemID><RecipientBusinessSystemID>SLD_B001</RecipientBusinessSystemID></MessageHeader><UtilitiesDevice><ID schemeID="DEID" schemeAgencyID="115">1200000120001564</ID><StartDate>2010.06.02</StartDate><EndDate>9999.12.31</EndDate><SerialID>1200000120001564</SerialID><MaterialID schemeID="MaterialID" schemeAgencyID="MPL_002">85</MaterialID><ProductUniqueItemID schemeID="Smart Meter" schemeAgencyID="MPL_002">SM1165HS</ProductUniqueItemID></UtilitiesDevice></UtilitiesDeviceERPSmartMeterCreateRequestMessage></ns1:UtilitiesDeviceERPSmartMeterBulkCreateRequest>
ERROR
HTTP/1.1 415 Unsupported Media Type
Connection: close
Date: Wed, 02 Jun 2010 12:26:33 GMT
Content-Length: 0
X-ORACLE-DMS-ECID: 0000IZsc9VaF^6WFLzyGOA1Bpe3k00007J
X-Powered-By: Servlet/2.5 JSP/2.1
Please give me the solution.
Thanks
Anil

Hi,
looks like there can be a problem with the webservice provider to which you are passing the data via SOAP adapter...
check that webservice using some other tools like XMLSPY or SOAPUI...
if everything is fine with that then test the entrie scenario by passing the same data...then you will get to know the exact problem...
HTH
Rajesh

RFC To SOAP With & Without ICO

Hi,
First Scenario RFC To SOAP (External Webservice) with ICO object is resulting with following error:
This error could be seen in Sender Communication Channel for Response message.
Error in processing caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: got unexpected document type:DOC_TYPE_UNKNOWN
I searched help for the same error in SDN forums there are only two links on the same topic:
1. DOC_TYPE_UNKNOWN
2. DOC_TYPE_UNKNOWN RFC -> XI ->Webservice
Didn't help me much to solve the issue:
Second scenario RFC To SOAP (External Webservice) without ICO object is executing fine.

Any solution...
Have any one tried this scenario. Please let me know ur inputs to solve this issue.
Edited by: Praveen Kurni on Jan 6, 2010 11:16 AM

RFC to SOAP - Internet

Hi
I am working on RFC to SOAP scenorio.
In the PI, if the internet access is closed.
The interface is not working, even though i am able to open the target URL from PI internet browser.
In the PI, if the internet access is provided.
The interface is working.
The target URL is residing on the same network, on different JBOSS server which uses AXIS2 application.
Is it possible to invoke a webservice, with out internet connection
Pls let me know your thoughts
Regards
Madhan D

I observed one more thing, in the PI trouble shooting guide, for the HTTP 403 error
It is mentioned to "Activate the service engine in transaction SICF"
I found that Service is active.
But when we right click on the service and test it.
We are getting the following response "URL_PIPELINE_NOT_FOUND"
Check the response of Bhavesh in this thread:
Re: Proxy --> R/3 http error 403
Regards,
Abhishek.

RFC -- XI --- SOAP adapter -- XI -- RFC

Hi all,
I need develop this scenario.
Currently I have this one works:
RFC <> XI <> RFC
But we need change it connecting to a new XI system with SOAP adapter, and I don't have experience with SOAP.
Could somebody give me documentation or help?
Can I do this without changing nothing in the mapping except the communication channel in the old XI system?
What it is necesary in the 2nd XI system? mapping?
How I can configure both SOAP channels?
Thanks a lot.
Raú

Hi
please refer
An Overview of SOAP
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
Could somebody give me documentation or help?
--> refer above links
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
soap-rfc-file:how to start
Help SOAP to RFC Scenario using BPM (Synchronous communication)
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Can I do this without changing nothing in the mapping except the communication channel in the old XI system?
--->Then you need to release the receiver RFC as Webservice
/people/kumar.prashant4/blog/2006/07/14/using-rfc-as-webservice-in-webdynpro
RFC WSDL file
What it is necesary in the 2nd XI system? mapping?
-->the mapping will be same provided the structure of RFCs are same, or you could import the wsdl and use as external defination.
How I can configure both SOAP channels?
-->
http://help.sap.com/saphelp_nw04s/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/content.htm
Sender
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Receiver
http://help.sap.com/saphelp_nw04s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/3418a0eabe072fe10000000a155369/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/02/6d5c034c182e4fbe7bfd25c2b56f9b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/27fd3b651f6a1ce10000000a11402f/frameset.htm
Thanks
Swarup

Rfc to soap (webservice)

Similar Messages

Maybe you are looking for