RFC user locked for guixt
Hi,
The communication user for guixt keeps getting locked. The RFC username & encrypted password are in the guixtrfc.ini which is distributed to each user PC. I'm thinking that somebody tried to edit the guixtrfc.ini & changed the encrypted password.
I need a method to either find out which front end PC has the bad guixt.ini or prevent the communication user from being locked (not all user accounts).
Thanks.
Stephen S.
Hi,
Thiugh am not exposed much to guixt the following document may help you to resolve your prob. Pl have a look.
http://www.synactive.com/download/sap%20gui%20scripting/sap%20gui%20scripting%20security%20settings.pdf
regards
Similar Messages
-
RFC users locked after system copy in production system
Hi,
BW_User,MDBTC(RFC users) system users were locked in our BI Production system at the same time system copy activity was running in the Quality system(production to quality) so as per our colleagues concern after system copy they started Quality system with out changing background work-process 0 so some jobs were triggered which were copied from production system.
Is there any cause to lock RFC users in production system for system copy? If there is any other reason where we can check logs
Thanks
Jalandhar ReddyHi,
Well maybe i am wrong to analyze your problem .
Anyway I faced this issue to in our system before and we found that one background job was running in a system that has basically prompting an RFC connection to another system. In the t.code SM59 and there was wrong password was put in.We just reset the password and it was worked fine.
You can try for this..
Regards
Bhuban
RKFL -
Situation:
Partner can log into VTX, but got a RFC error when doing certain transactions.
Solution:
An locked user account was used in the definition of a RFC destination. Corrected via transaction "SM59".Hi,
Thiugh am not exposed much to guixt the following document may help you to resolve your prob. Pl have a look.
http://www.synactive.com/download/sap%20gui%20scripting/sap%20gui%20scripting%20security%20settings.pdf
regards -
Authorization Required for RFC user in R/3-APO system.
Could you please help regarding one authorization issue. I want to know the authorization required for one RFC user. Now this RFC user used for RFC connection of SAP R/3 - SAP APO system. user type is given dialog type and SAP_ALL profile has been given to this user id. Now I have to remove SAP_ALL from this user id in R/3 and APO system and provide the required the authorization in R/3 and APO system.
Regard
AuroshikhaThe RFC authorisation depends completely on what the user is doing (ALEREMOTE?). We can't tell you what RFC auths your connection requires.
There is a guide to doing this here: https://wiki.sdn.sap.com/wiki/display/Security/BestPractice-HowtoanalyzeandsecureRFC+connections -
PM Order is getting blocked by RFC user
Hi all, i'm facing the following problem. We've an FM that is invoked externally using an RFC user, that is used to change the status of an specific order. This FM first makes the ENQUEUE of the given object, with the following data:
CALL FUNCTION 'ENQUEUE_ESORDER'
EXPORTING
mode_aufk = 'S'
aufnr = number
_wait = 'X'
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3 .
Then calls the standard FM STATUS_CHANGE_FOR_ACTIVITY and after that executes the
CALL FUNCTION 'DEQUEUE_ESORDER'
EXPORTING
aufnr = number.
After that we have a COMMIT WORK.
Somehow and with no explicit reason, the given order remains locked by RFC user, sometimes for several hours.
This happen in Production System. We'd never get this kind of situation on pre-production.
Does anyone have any clue about this ???
Thanks for your kind attention.
Regards,Hi Rahul,
Thanks for your answer. But it seems to me that the problem is not a question of authorization, because this same user is used in the same system for another processes.
For example, today we have an Order that is blocked in SM12 since 12:47:12 and the processes for closing it still remains active and waiting, but in another way for Orders of the same type during today, this situation doesn't occur and the respective processes were finished sucessfully.
Thanks anyway.
Regards, -
RFC User for satellite systems
Hello Gurus,
I just wanted to ask about one issue. We are a SAP partner and using Solution Manager in VARs scenario. There are many systems of our customers connected to our Solution Manager..
Now I want to ask about RFC user(s). As I see, in our Solution Manager there are many users(communications type C) with Synthax SOLMAN<system id> or something like that. It means basically, that we have for every particular customerS system one SOLMAN user for RFC(cust_scout) in our Solution Manager. My question is if we can replace all of these users with only one RFC user for all the systems and customers?
Many thanks in advance for your help
Miloslav Pudil
IDS Scheer
Prague
Czech Republic>
Miloslav Pudil wrote:
> I just wanted to ask about one issue. We are a SAP partner and using Solution Manager in VARs scenario. There are many systems of our customers connected to our Solution Manager..
> Now I want to ask about RFC user(s). As I see, in our Solution Manager there are many users(communications type C) with Synthax SOLMAN<system id> or something like that. It means basically, that we have for every particular customerS system one SOLMAN user for RFC(cust_scout) in our Solution Manager. My question is if we can replace all of these users with only one RFC user for all the systems and customers?
Hi Miloslav,
Technically, it will work that you define one common RFC user in your SolMan for communication (RFC BACK destination) from all connected managed systems.
BUT, I would never recommend it.
Once a managed system cause issues in your SolMan, you are not able (or at least it's much more difficult) to identify the managed system. Same happens, if a invalid password in the BACK destination leads to a locked user.
My recommendation: Spend the extra effort in creating a user per managed system. Operation will be much easier later.
See also this guide:
[Activating EarlyWatch Alert [EWA] in End Customeru2019s System |http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000567342009E]
Best regards,
Ruediger -
Hi experts,
We are using rfc_cua user for RFC communication between R/3 prd server and E-Rec prd server. Here issue is frequesntly rfc_cua user get's locked automatically. if we unlock the id it will work fine for one or two day and again it will get locked, There is no same amount of time gap between locking of this ID every time time. Kindly help me how to trace this issue.
Regards,
Sampath.Are you using CUA or rfc user has been named just like that & what is E-Rec prd server .. is it SAP or something else ?
Dont u find something in change log of this user ??
thanks
ashish -
Trusted RFC not working for different user , working for same user
Dear All,
I have two SAP system - One Solman (7.0) and another ECC 6.0 (SR3) on HPUX box with Oracle DB (Unicode).
I want to establish Trust relationship between these system.
I have configured the same, as per the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm
and note 128447.
My requirement is one user X in solman client 001,
will execute some test plan (Tcode stwb_2) which will take the control to ECC 6.0 client 200, execute the tcode as user Y and come back in Solman again.
The user X (SAP_ALL) exists in Solman - client 001 and user Y (SAP_ALL) exists in ECC 6.0 - client 200.
In ECC 6.0 client 200, I have created a role ZRFCACL with the following and assigned to the user Y (as per the above help / note):
Role : ZRFCACL
Auth. Obj: S_RFCACL
Value assigned to fields are:
RFC_SYSID : SOL
RFC_CLIENT: 001
RFC_USER : X
RFC_EQUSER: N
RFC_TCODE : *
RFC_INFO : *
ACTVT : 16
Whenever the user X is trying to execute the test from solman, he is getting the error : "No authorization to log on as trusted system (RC = 0)"
Each time the user is trying the above, in ECC 6.0, the following dump is occuring:
CALL_FUNCTION_SINGLE_LOGIN_REJ under username SAPSYS
I have assigned the role ZRFCACL to user X in Solman also.
Next, I have performed the following check:
created one user M in both system
created the role ZRFCACL2 in ECC 6.0 client 200 as follows and assigned the role to user M:
Role : ZRFCACL2
Auth. Obj: S_RFCACL
Value assigned to fields are:
RFC_SYSID : SOL
RFC_CLIENT: 001
RFC_USER : ''
RFC_EQUSER: Y
RFC_TCODE : *
RFC_INFO : *
ACTVT : 16
Assigned SAP_ALL to user M in both system (So the user M in Solman does not have ZRFCACL2).
This time, the trust relationship worked and no dump got generated.
I have also checked the thread Trusted RFC do not work
but unable to resolve the issue.
Any suggestion where the things are going wrong in this / what else I need to check or this is not possible at all?
Thanks in advance for your help.
SudipHi Valdecir,
Thanks for the reply. I am providing the detail of the generated dump below:
Please check in case any clue is there.
Runtime Errors CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time 12.08.2008 18:59:32
Short text
No authorization to logon as trusted system (Trusted RC=0).
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An RFC call (Remote Function Call) was sent with the invalid user ID "98819 "
. Or the calling system is not registered as trusted system in the
target system.
How to correct the error
The error code of the trusted system was 0.
Meaning:
0 Correct logon as trusted system mode
1 No trusted system entry for the calling system "SOL " or the
security key entry for the system "SOL " is invalid
2 User "98819 " does not have RFC authorization (authorization object
(S_RFCACL) for user "98819 " witl client 001.
3 The timestamp of the logon data is invalid
The error code of the SAP logon procedure was 1.
Meaning:
0 Login was correct
1 Wrong password or invalid user ID
2 Locked user
3 Too many attempted logons
5 Error in the authorization buffer (internal error)
6 No external user check
7 Invalid user type
System environment
SAP-Release 700
Application server... "gcbeccd"
Network address...... "10.10.4.158"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "gcbeccd"
Database type..... "ORACLE"
Database name..... "RD3"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 5 2008 00:55:24"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1194640
MM Free. 2992576
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "489F2BD6C36D0F12E10000000A0A049E"
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "SOL"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. 001
User................ 98819
Transaction......... "SMSY"
Call Program........."SAPLSRTT"
Function Module..... "SCCR_GET_RELEASE_NR"
Call Destination.... "SM_RD3CLNT200_TRUSTED"
Source Server....... "gcbsolm_SOL_00"
Source IP Address... "10.10.4.206"
Additional information on RFC logon:
Trusted Relationship "X"
Logon Return Code... 1
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "SAPMSSY1".
Source Code Extract
Line
SourceCde
37
endmodule.
38
39
module %_rfcdia_call output.
40
"Do not display screen !
41
call 'DY_INVISIBLE_SCREEN'.
42
perform remote_function_diacall.
43
endmodule.
44
45
module %_cpic_start.
46
if sy-xprog(4) = '%RFC'.
47
perform remote_function_call using rfctype_external_cpic.
48
else.
49
call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50
perform cpic_call using convid.
51
endif.
52
endmodule.
53
54
55
form cpic_call using convid type c.
56
communication send id convid buffer header.
57
if sy-subrc eq 0.
58
perform (sy-xform) in program (sy-xprog).
59
else.
60
message a800.
61
endif.
62
endform.
63
64
form remote_function_call using value(type).
65
data rc type i value 0.
66
do.
>>>>>
call 'RfcImport' id 'Type' field type.
68
if sy-xprog = 'JAVA'.
69
system-call plugin
70
id 'JAVA' value 'FORW_JAVA'
71
id 'RC' value rc.
72
if there is no rollout on the JAVA side which
73
rolls both, JAVA and ABAP, we return to the
74
C-Stack and reach this point
75
76
in case there was an rollout, the ABAP-C stack is lost
77
and we jump direkt to this point
78
79
here we trigger the rollout on this Abap side with
80
the following statement
81
system-call plugin
82
id 'JAVA' value 'ROLL_OUT'
83
id 'RC' value rc.
84
else.
85
perform (sy-xform) in program (sy-xprog).
86
rsyn >scont sysc 00011111 0.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080812
SY-UZEIT
185932
SY-XPROG
SAPRFCSL
SY-XFORM
READ_SINGLE_LOGIN_DATA
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM SAPMSSY1 SAPMSSY1 67
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
0000
0000
2222
0000
SY-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
0003
SY-XPROG
SAPRFCSL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455445422222222222222222222222222222222
3102633C00000000000000000000000000000000
%_ARCHIVE
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
READ_SINGLE_LOGIN_DATA
000000000000000000000000000000
000000000000000000000000000000
544455444445444445445422222222
2514F39E7C5FCF79EF414100000000
%_SPACE
0
0
2
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination was triggered in function "ab_xsignon"
of the SAP kernel, in line 2491 of the module
"//bas/700_REL/src/krn/rfc/absignon.c#9".
The internal operation just processed is "CALY".
Internal mode was started at 20080812185932.
Calling system.....: "SOL "
Caller.............: "98819 "
Calling client.....: 001
RFC user ID........: "98819 "
RFC client.........: 200
Trusted return code: 0
Logon return code..: 1
Transaction code...: "SMSY "
Active state.......: "-782823270"
Note: At releases < 4.0, the information for the caller is not
available.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(0) 0x4000000003b2b450 CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
(1) 0x4000000004d2c470 Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
(2) 0x4000000004d32160 ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
(3) 0x4000000002b43cb0 SignOnDumpInfo + 0x280 at absignon.c:2491 [dw.sapRD3_DVEBMGS00]
(4) 0x4000000002b3f2f0 ab_xsignon + 0xb30 at absignon.c:876 [dw.sapRD3_DVEBMGS00]
(5) 0x4000000002aa4cb0 ab_rfcimport + 0x1ad0 at abrfcfun.c:3599 [dw.sapRD3_DVEBMGS00]
(6) 0x40000000040f4a80 Z8abjcalyv + 0x500 [dw.sapRD3_DVEBMGS00]
(7) 0x400000000402f190 Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
(8) 0x4000000003f538b0 Z9abxeventPKt + 0xb0 at abrunt1.c:281 [dw.sapRD3_DVEBMGS00]
(9) 0x4000000003f360a0 ab_dstep + 0x280 [dw.sapRD3_DVEBMGS00]
(10) 0x4000000001cb4600 dynpmcal + 0x900 at dymainstp.c:2399 [dw.sapRD3_DVEBMGS00]
(11) 0x4000000001cab0e0 dynppbo0 + 0x280 at dymainstp.c:540 [dw.sapRD3_DVEBMGS00]
(12) 0x4000000001cb1ec0 dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
(13) 0x4000000001c9dff0 dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
(14) 0x4000000001fea460 Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
(15) 0x4000000001fb4de0 TskhLoop + 0x4e20 at thxxhead.c:4518 [dw.sapRD3_DVEBMGS00]
(16) 0x4000000001faae40 ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
(17) 0x4000000001569ec0 DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
(18) 0x4000000002c10630 nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
(19) 0x4000000002c105c0 main + 0x60 [dw.sapRD3_DVEBMGS00]
(20) 0xc00000000002be30 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
11.04.2005
09:27:15
22528
E
1
Prg
SAPLSCCA
1
05.07.2005
13:10:18
52224
E
2
Prg
SAPRFCSL
0
13.02.2005
17:31:45
17408
E
3
Typ
RFCSYSACL
0
13.02.2005
17:31:45
7168
4
Typ
SYST
0
09.09.2004
14:18:12
31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0\0
Program SAPRFCSL
RFCSYSACL . . : : 00001760
SOL RD3
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
116
CLEA
00
0035
SAPMSSY1
60
117
CLEA
00
0036
SAPMSSY1
60
118
CLEA
00
0037
SAPMSSY1
60
119
MESS
00
001C
SAPMSSY1
60
120
ENDF
00
0000
SAPMSSY1
62
121
00
0000
SAPMSSY1
62
122
PERP
00
0001
SAPMSSY1
64
123
PERP
02
0000
SAPMSSY1
64
124
WHIL
00
0002
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
128
WHIL
00
0003
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
132
BRAN
05
001E
SAPMSSY1
66
133
CALY
00
0003
0038
002A
0005
002B
0000
0000
SAPMSSY1
67
>>>>>
CALY
02
0000
0039
8000
0000
0000
0000
0000
SAPMSSY1
67
141
COMP
00
0002
0010
003A
SAPMSSY1
68
143
BRAF
02
000E
SAPMSSY1
68
144
SRFC
01
0000
003A
003B
SAPMSSY1
69
146
SRFC
01
0000
003C
C000
SAPMSSY1
69
148
SRFC
02
0000
0000
0000
SAPMSSY1
69
150
SRFC
01
0000
003A
003D
SAPMSSY1
81
152
SRFC
01
0000
003C
C000
SAPMSSY1
81
Thanks & Regards
Sudip -
EREC : Lock SAP user ID for future date
Hi ,
Can anyone suggest a way to Lock an SAP user id for a Future Date .
Thanks in advance,
TkHi,
Instead of locking you can better delimit so that you can have a history for audit reasons.
i dont find business requirement for locking user.
thanks
rafi -
User lock persists for killed process
Hi,
We have an app that acquires a user lock (using dbms_lock, release_on_commit FALSE).
We needed to kill a session but it remained in v$session (KILLED), even after killing the OS process. Fine, I know it will clear up eventually.
But the user lock (UL) persists. Does anyone know how it can be force-released?
Calling dbms_lock.release (using handle in v$lock) fails, even as user SYS, the error being that the user does not own the lock. But the owning session is killed so who can release it?
Eventually the session (and lock) disappers from v$session/v$lock but can the lock be removed before then, to avoid a DB bounce in an urgent case?
ThanksIf the process was truely KILLED and not MARKED FOR KILL then I do not know what could of happened. I cannot remember Oracle ever failing to release a user lock when the acquiring session was terminated. We use a fair number of UL; however, few of our processes have concurrent sessions that attempt to use the same UL. Mostly we just ensure that batch processes do not get submitted twice and that some on demand processes run single threaded or do not run if another customer has submitted the task.
HTH -- Mark D Powell -- -
Hi experts,
We need to set the password for RFC User in small letters.But we are not able to do it ,because of our 'login/*' parameter values.
Is there is any other method to create the password for User ID with small letters(Ex:welcome,hello)?
Thanks in Advance,
Karthika> > Login rules are not specific to user types. It is same for all type of users.
> Sorry, this is not correct. The password validity rules are a good example which don't apply to SYSTEM and SERVICE type users. Other examples are the idle time rules and compliance to policy rules and the logon ticket rules and remote login via debugging rules and...
>
I tried to talk about is as per the ongoing discussion topic i.e. Case sensitiveness of Passwords and not other attributes. So from this point of view there is no such separate rule applies during admin imposed password or during a change (the cases where system prompts for changing password).
> > From NAS 7 there is a change in the password rules.
> There were major changes in 46B, and 6.10 and 6.40 as well, and Karthika still has not told us which release she is on.
>
Agreed totally.
> > [Note 750390 - USR02: various problems with password attributes|https://service.sap.com/sap/support/notes/750390]
> > [Note 624635 - Error messages with password change using RFC function|https://service.sap.com/sap/support/notes/624635]
> I cannot see how these notes are related to this silly requirement of setting a lower-case only password.
>
I didn't went through in details fully but seen it contains a considerable error details.... may be of any help to OP.
> I think either Karthika is playing a joke on us, or the person interviewing Karthika is playing a joke on her... These would be the only logical explanations left which I can see for for such a requirement.
>
May be.. but of course need more information and purpose of such strictness for setting such password. Also the FM PASSWORD_FORMAL_CHECK can be used with required customizations but you are the best person to tell this properly.
regards,
Dipanjan -
RFC User for Connectivity with ABAP Server Proxy Required?
Hi people,
I am just wondering how I set-up my connectivity between XI and my business system B.
Our basis already set-up the connection to the runtime workbench from B->XI
For that sake they've added the xirwbuser to B (Xi has it as well, of course).
Now I am configuring the whole thing in the Directory. There I need an receiver agreement and a channel. For that I take the adapter type "XI". Anyway, I need to give here an RFC destination as well. I've added one of type "H".
And now the issue: Do I really need a separate user for that rfc connection? I thought with proxies the systems are somewhat like "hard-wired" and do not need special users.
Anyway, if I need a dedicated RFC user: Is a certain role enough or do I need special roles depending on the stuff I am doing in the business system?
Thanks in advance!
HelgeYou can of course use an existing service user.
But for monitoring purpose it is receommended to use a seperate user. (Think about system log entries).
The user needs the role SAP_XI_APPL_SERV_USER.
Regards
Stefan -
Not able to use password with characters for RFC User.
hi All,
I have installed SAP SCM 5.0 with MaxDB 7.6and liveCache 7.6.
I created RFC user and RFC destination to administer liveCache globally as per SAP notes 305634 and 452745. I changed the initial passwords and tested Remote login for RFC User.
But when I try to start liveCache with startrfc following the link below
http://help.sap.com/erp2005_ehp_04/helpdata/EN/95/379f3cad1e3251e10000000a114084/frameset.htm
I got the following error
RFC Call/Exception: SYSTEM_FAILURE
Group Error group 104
Key RFC_ERROR_SYSTEM_FAILURE
Message Name or password is incorrect (repeat logon)
Then I logged into the CI with RFC user and try to start the liveCache with RSLVCSTART T-Code SE38..I got the following error.
Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LCS on server saplcslc
Message no. LVC007
I tried by changing the password for RFC user to numeric [0-9] and special characters [$,:] which worked fine.
Does anyone faced this issue earlier? I searched notes, sdn and finally google ... but no luck to resolve the issue.
Your help is much appreciated.
Thanks,
VenkatYes I used LCA as liveCache connection. I resolved the issue with RSLVCSTART. Thanks for your suggestion to run connection test. I used wrong password for control user in the LCA connection. Now LCA connection shows everything is fine.
But I am still not able to use alphanumeric password RFC user to start the liveCache from command line. I get the following when run startrfc command...
bash-3.00$ /usr/sap/CAT/rfcsdk/bin/startrfc -3 -d LCSCLNT001 -h sapcatci -s 51 -c 001 -u LCSRFC -p Mach1cspsap\$ -l EN -F START_LIVECACHE_LVC -E IV_CON_NAME=LCA
RFC Call/Exception: SYSTEM_FAILURE
Group Error group 104
Key RFC_ERROR_SYSTEM_FAILURE
Message Name or password is incorrect (repeat logon)
bash-3.00$ echo $?
1
But I can start the liveCache from command line with numeric password successfully.
bash-3.00$ /usr/sap/CAT/rfcsdk/bin/startrfc -3 -d LCSCLNT001 -h sapcatci -s 51 -c 001 -u LCSRFC -p 19811983\$ -l EN -F STOP_LIVECACHE_LVC -E IV_CON_NAME=LCA
bash-3.00$ echo $?
0
Note the difference between the passwords used. Do i need to change any settings to accept alphanumeric passwords for RFC user.
Note that I am able to start liveCache server in both cases(alphanumeric password and numeric password) by logging into SAP GUI and RSLVCSTART program. The problem is only when i try to start the liveCache from the commandline.
Any help will be much appreciated.
Thanks,
Venkat -
Hello,
when i tried to unlock user both globally and locally (in cua) it failed..saying 'still the user is locked''..why ?
(refering rfc user here)
Thanks
RajeshHi Rajesh,
Check this link:
When unlocking user ALEREMOTE, the user is still locked
Rajeev -
Authorizations needed for MAM 2.5 for RFC user and business users
Hello all,
We are using MAM 2.5 application but we are facing authorizations issues.
It seems we have not enough authorizations on RFC user used between middleware system and back-end system located on the RFC destination MAM on the middleware.
And we don't find any SAP document related to this customizing.
Moreover is there any other or same document deals with authorizations needed on the back-end for each user using MAM on its mobile device ?
Thank in advance,
Eric GOURDOUHello,
Can you send me the errors you have?
If you have a trusted connection, then each users need the authorization S_RFCACL .
Other than that, I never had to set any authorization for the plant maintenance scenarios of MAM.
Thank you,
Julien.
msc mobile Canada
http://www.msc-mobile.com
Maybe you are looking for
-
To find out the last row that is updated in a View Object
Hi OAF Gurus, I have requirement like, I have to find out the last row that is updated on a particular View Object and I have send a mail to the users about the change. JegSAMassMobVOImpl vo = getJegSAMassMobVO1(); JegSAMassMobVO is the View Object N
-
Calculation and posting of discount on Payment and on net amount
Hello, My client would like to configure posting of discount on payment. The discount should be calculated on the net amount and should also adjust the VAT input tax amount. Example: PO: 100 EUR, VAT 10 EUR, Gross amt = 110 EUR, Invoice re
-
After I up dated my phone my volume wouldn't work when I went into my settings to choose an alert. When I got a text message it would work some times and sometimes it would cut off half way and sometimes it would just vibrate. Also my up and down but
-
How to clear the fields of the screen ?
Hi, I'm having two fields for selection..when i press enter after entering some values,based on that my table control will get filled up..and when i double -click on that row in table control i get all the values of that row in the respective fields
-
Which iOS device should I purchase to use for development and testing?
I have the original iPhone, and so far I have been using that for testing the iOS apps that I have been developing. I am in a dilemma as whether to purchase the iPod touch 4th Generation, or wait till I save enough to get the iPhone 4S. I don't reall