RMAN Script file

Dear
I have written a Batch file to backup my database with RMAN
The code is as follows:
SET ORACLE_SID=NHORACLE;
RMAN TARGET SYS/ORACLE;
CONNECT CATALOG RMAN_OWNER/RMAN_OWNER@CATDB;
BACKUP;
I saved this file as backup.bat, fine, if I run this file, it is successfully executing first two lines and Entering into RMAN prompt and stopped. It is not executing the next two lines.
Mean while, I can execute the whole from RMAN prompt.
Please suggest me
thanks with warm regards
Aijaz

Try to do it so:
SET ORACLE_SID=NHORACLE;
RMAN TARGET SYS/ORACLE;
@<path>run.sql;
Create this file:
run.sql file
CONNECT CATALOG RMAN_OWNER/RMAN_OWNER@CATDB
BACKUP;
Joel Pérez
http://otn.oracle.com/experts

Similar Messages

  • RMAN script for Unix

    We have decided to abandon user managed hot backups and go with RMAN. Could you critizize the following approach and see if we are missing anything? I am making whole database backup and controlfile and archivelogs. I am using RMAN catalog.
    In a Unix script setting all of the environment variables and then
    connect target ********
    connect catalog *********
    configure snapshot controlfile to '${ORACLE_HOME}/snapshot_${ORACLE_SID}_${TIMESTAMP}_ctl';
    run {
    allocate channel c1 type disk;
    allocate channel c2 type disk;
    allocate channel c3 type disk;
    backup database plus archivelogs;
    release channel c1;
    release channel c2;
    p.s. control file autobackup is on
    Also, I have these questions:
    1. How do I direct the output of this backup to a file?
    2. Is there a way to check for errors within this file to see if the backup went ok?
    3. Would anyone have a unix shell script example of the above?
    4. How do I make sure that catalog is synched with control file and what is on the file system?
    5. Is it customary to delete archive logs via RMAN script if, say, my policy is to keep it on the file system for 7 days?
    thank you for any input!

    Hi,
    You didnot mention the db version, assumed it's 10g.
    If you planned to schedule this job at os level, you might use crontab (unix). The snapshot controlfile config can set with catalog once, so it's not needed to include in your backup script. Like wise your retention can set as "recovery window of 7 days".
    1. How do I direct the output of this backup to a file?
    ==> inside rman script you might use the following command,
    set log to '/home/oracle/rmanbkp.log';
    2. Is there a way to check for errors within this file to see if the backup went ok?
    ==> you might check in the logfile for ORA- and RMAN- errors.
    3. Would anyone have a unix shell script example of the above?
    I use to schedule this job either by OEM or crontab using rman script file.
    4. How do I make sure that catalog is synched with control file and what is on the file system?
    RMAN will do auto sync with controlfile.
    5. Is it customary to delete archive logs via RMAN script if, say, my policy is to keep it on the file system for 7 days?
    Upon successful backup you may delete the archivelogs or you might decide to keep it for 7 days and then delete by applying "delete obsolete" command.
    Thanks,
    Nirmal

  • Can I call an external program from my rman script

    Hi
    Is it possible to do an external call to a bat-file in a rman script?
    My script looks like this (it's pretty much generated from EM):
    $rman_script="backup device type disk tag '%TAG' database;
    sql 'alter system archive log current';
    backup device type disk tag '%TAG' archivelog all not backed up delete all input;
    allocate channel for maintenance type disk;
    delete noprompt obsolete device type disk;
    release channel;
    Can i somehow make an external call before at the end?
    Regards
    Klaus Mogensen

    You can use the HOST command.

  • RMAN backup files are still exist since long time, how to delete?

    Dear sir;
    I'm using the below script to do daily backup, however there are many rman backup files are still exist and consumes HD size, how could I delete these files in daily bases? some files dated in FEB, MAR, APR,
    ============Daily RMAN script=========
    rman target /<<!
    backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
    backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
    backup current controlfile format '/u15/rman/control_%U.rman';
    delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
    delete noprompt obsolete;
    ================================END
    Thanks and best regards
    Ali

    Hi;
    Our backup policy should have 7 days; however we have here some files from JAN, FEB,MAR, APR /2012 WHICH ARE BEYOND THE RETENTION DATE and these files should be deleted by executing " delete noprompt obsolete; ".
    All files are exist in /u15/rman/
    -rw-r----- 1 oracle oinstall 1151763968 Jan 21 01:36 arc_backup_7kn19h4a_1_1.rman
    -rw-r----- 1 oracle oinstall 1136882176 Jan 21 01:36 arc_backup_7ln19h4q_1_1.rman
    -rw-r----- 1 oracle oinstall 1135984640 Jan 21 01:36 arc_backup_7mn19h5a_1_1.rman
    -rw-r----- 1 oracle oinstall 1126627328 Jan 21 01:37 arc_backup_7nn19h5q_1_1.rman
    -rw-r----- 1 oracle oinstall 880606720 Mar 12 02:53 arc_backup_7nn5ldhp_1_1.rman
    -rw-r----- 1 oracle oinstall 1093043712 Jan 21 01:37 arc_backup_7on19h6a_1_1.rman
    -rw-r----- 1 oracle oinstall 9797632 Dec 15 01:04 control_04mu7tcp_1_1.rman
    -rw-r----- 1 oracle oinstall 36896768 Mar 3 02:55 control_4cn4tm9k_1_1.rman
    -rw-r----- 1 oracle oinstall 36896768 Mar 4 02:53 control_4on50ahm_1_1.rman
    -rw-r----- 1 oracle oinstall 36896768 Mar 5 02:55 control_56n52v1j_1_1.rman
    -rw-r----- 1 oracle oinstall 16252928 Jan 23 01:40 control_8tn1eq3t_1_1.rman
    -rw-r----- 1 oracle oinstall 16252928 Jan 24 01:40 control_9cn1heg0_1_1.rman
    -rw-r----- 1 oracle oinstall 202940416 Dec 15 01:04 full_backup_01mu7t50_1_1.rman
    -rw-r----- 1 oracle oinstall 1097728 Dec 15 01:04 full_backup_02mu7tcc_1_1.rman
    -rw-r----- 1 oracle oinstall 201285632 Dec 14 01:04 full_backup_0nmu58ou_1_1.rman
    -rw-r----- 1 oracle oinstall 5957304320 Feb 29 02:46 full_backup_2ln4g9l1_1_1.rman
    -rw-r----- 1 oracle oinstall 4128768 Feb 29 02:47 full_backup_2mn4gft8_1_1.rman
    -rw-r----- 1 oracle oinstall 6027075584 Mar 1 02:49 full_backup_32n4o6ov_1_1.rman
    -rw-r----- 1 oracle oinstall 4128768 Mar 1 02:49 full_backup_33n4od66_1_1.rman
    -rw-r----- 1 oracle oinstall 6187171840 Mar 2 02:51 full_backup_3gn4qr50_1_1.rman
    -rw-r----- 1 oracle oinstall 4145152 Mar 2 02:51 full_backup_3hn4r1kn_1_1.rman
    -rw-r----- 1 oracle oinstall 6115786752 Mar 3 02:51 full_backup_40n4tfgu_1_1.rman
    above is a short list of contents.
    to do our daily backup we perform the following script (in daily)
    ==================
    backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
    backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
    backup current controlfile format '/u15/rman/control_%U.rman';
    delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
    delete noprompt obsolete;
    ==================
    Thanks and best regards
    Ali

  • Schedule rman script in Windows 2003

    Oracle 10.2. I wrote a rman script and tried to schedule auto run in Windows 2003 server. I got this errors:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database:
    ORA-12560: TNS:protocol adapter error
    The batch file name: rman_backup.bat
    content: rman target / cmdfile rman_backup.rcv log rman_backup.log
    Here is how I set it up:
    go to Control Panel>Scheduled Tasks>Add Scheduled Task, find rman_backup.bat, choose the run time and finish it. When asking for user name and password, I supply the user which is in oracle dba group.
    But when it run, it just produced the above error and won't run.
    Please advise
    S.
    in SQLnet.log
    fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=D:\oracle\product\10.2.0\db_1\bin\rman.exe)(HOST=W3TY5Z203)(USER=WELC))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.4.0 - Production
    Time: 30-MAR-2010 11:27:00
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0

    here is example of script we are using to backup database from windows scheduler:
    set oracle_home=d:\oracle\ora920
    set path=d:\perl\bin;d:\oracle\ora920\bin;c:\winnt;c:\WINDOWS\system32;
    set PERL5LIB=''
    set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
    set TNS_ADMIN=d:\oracle\ora920\network\admin
    d:
    cd \scripts
    set oracle_sid=car
    rman target sys/car_$z3br4 catalog rman/oemrp_pwd@oemrp @rman_level0_car.rman > rman_level0_car.log
    perl email_log.pl "RMAN Level 0 Log" d:\scripts\rman_level0_car.log CARthis script backing up 9i database. 10g and 11g database we backing up via EM grid control.
    You can change this script to backup 10g or 11g databses as well.

  • What's wrong with this RMAN script?

    Hi,
    I have a rman script to back up the 8i database like the following:
    #!/bin/ksh
    if [ $# != 1 ]; then
    echo "Usage: $0 ORACLE_SID"
    exit
    fi
    ORACLE_SID=$1; export ORACLE_SID
    RMAN_LOC=/u1/rman_backup
    export ORACLE_HOME=/u2/oracle/8.1.7
    export PATH=$ORACLE_HOME/bin:$PATH
    echo "connect target /" > rman_backup.rcv
    echo "" >> rman_backup.rcv
    echo "configure controlfile autobackup on;" >> rman_backup.rcv
    echo "" >> rman_backup.rcv
    echo "configure controlfile autobackup format for device type disk to '${RMAN_LOC}/%F';" >
    rman_backup.rcvecho "" >> rman_backup.rcv
    echo "run {" >> rman_backup.rcv
    echo "allocate channel t1 type disk;" >> rman_backup.rcv
    echo "backup database format '${RMAN_LOC}/db_${ORACLE_SID}_%u';" >> rman_backup.rcv
    echo "}" >> rman_backup.rcv
    rman cmdfile rman_backup.rcv
    When I run it, I got the following error:
    RMAN> connect target /
    2>
    3> configure controlfile
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01005: syntax error: found "controlfile": expecting one of: "compatible"
    RMAN-01007: at line 3 column 11 file: rman_backup.rcv
    BTW, the same script is working fine with 9i db.
    Could someone help me?
    Thanks in advance,
    Helen

    Hello,
    there is no controlfile autobackup in 8i RMAN. You must copy controlfile on your own, e.g. SQL 'ALTER DATABASE BACKUP CONTROLFILE TO file_name' or use eqiv. rman command - please check documentation.
    Kind Regards, Piotr
    DBA OCP.

  • RMAN Script & RMAN Configuration

    Dear All,
    This is the first time i am using RMAN. i just wanted to execute the following RMAN script for a testing purpose, for this what are the RMAN configuration i must have to do before executing this script below:
    RMAN> run {
    shutdown immediate;
    startup mount;
    backup database;
    alter database open;
    }This is my current setup of RMAN
    RMAN> show all;
    RMAN configuration parameters for database with db_unique_name DP are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'E:\RMAN\';
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'E:\APP\10004\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFDP.ORA'; # defaultKindly advice me and give me a very clear study for this above parameters
    Regards
    HAMEED
    Once i execute that script i got this following error :
    +RMAN> run {+
    +2> shutdown immediate;+
    +3> startup mount;+
    +4> backup database;+
    +5> alter database open;+
    +6> };+
    database closed
    database dismounted
    Oracle instance shut down
    connected to target database (not started)
    Oracle instance started
    database mounted
    Total System Global Area     770019328 bytes
    Fixed Size                     1374780 bytes
    Variable Size                301991364 bytes
    Database Buffers             461373440 bytes
    Redo Buffers                   5279744 bytes
    Starting backup at 18-MAY-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=134 device type=DISK
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    input datafile file number=00006 name=E:\APP\10004\ORADATA\DP\HAMEED01.DBF
    input datafile file number=00007 name=E:\APP\10004\ORADATA\DP\ABDUL01.DBF
    input datafile file number=00008 name=E:\APP\10004\ORADATA\DP\TEST01.DBF
    input datafile file number=00001 name=E:\APP\10004\ORADATA\DP\SYSTEM01.DBF
    input datafile file number=00002 name=E:\APP\10004\ORADATA\DP\SYSAUX01.DBF
    input datafile file number=00005 name=E:\APP\10004\ORADATA\DP\EXAMPLE01.DBF
    input datafile file number=00003 name=E:\APP\10004\ORADATA\DP\UNDOTBS01.DBF
    input datafile file number=00004 name=E:\APP\10004\ORADATA\DP\USERS01.DBF
    channel ORA_DISK_1: starting piece 1 at 18-MAY-11
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/18/2011 17:22:30
    ORA-19504: failed to create file "E:\RMAN\"
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    Edited by: Hameed on May 18, 2011 4:59 AM

    Dear Chinar, can you please varify this below ,, is it correct,, after given your setup i ran this script,,,
    Kindly advice me
    Regards
    HAMEED
    RMAN> run
    2> {
    3> backup current controlfile;
    4> }
    Starting backup at 18-MAY-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=143 device type=DISK
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    including current control file in backup set
    channel ORA_DISK_1: starting piece 1 at 18-MAY-11
    channel ORA_DISK_1: finished piece 1 at 18-MAY-11
    piece handle=E:\RMAN\FULL_06MCLH66_1_1.BK tag=TAG20110518T180910 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
    Finished backup at 18-MAY-11
    Starting Control File Autobackup at 18-MAY-11
    piece handle=E:\RMAN\CFC-796596855-20110518-00 comment=NONE
    Finished Control File Autobackup at 18-MAY-11Edited by: Hameed on May 18, 2011 5:55 AM

  • RMAN script doesnt exit shell after backup

    Hi,
    I've the following script on AIX 6.1, Oracle 11.2.0.1.0:
    export ORACLE_HOME=/oracle/medprod/product/11.2.0/dbhome_1
    export ORACLE_SID=MEDPROD
    export PATH=$ORACLE_HOME/bin:$PATH
    export LOG_DIR=/home/medinous/backup/logs
    export LOG_FILE=$LOG_DIR/medprod_daily_backup_`date +%d%m%Y%X`.log
    rman target / catalog rman/rman@rman log=$LOG_FILE <<EOF
    execute script medinous_daily;
    exit;
    EXIT;
    EOF
    and:
    printing stored script: medinous_daily
    +{+
    allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
    allocate channel t2 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
    allocate channel t3 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
    backup format 'medinous_dailybackup_%d_%s_%t'  database;
    backup  format 'medinous_dailyarchbackup_%d_%s_%t' archivelog all not backed up 1 times;
    crosscheck backup;
    delete noprompt obsolete;
    delete noprompt expired backup;
    delete noprompt expired archivelog all;
    release channel t1;
    release channel t2;
    release channel t3;
    +}+
    For some reason, the rman script, scheduled via crontab doesn't exit after successful backup, the process just remain alive, even though there's an explicit exit command at the end.
    Any idea?
    dula

    No, the script actully executes successfully. The problem is that after executing, the process does'nt die, it doesnt exit rman:
    channel t1: finished piece 1 at 28-DEC-10
    piece handle=prodarchbackup_PROD_666_738921153 tag=TAG20101228T075233 comment=API Version 2.0,MMS Version 5.5.2.0
    channel t1: backup set complete, elapsed time: 00:00:03
    channel t2: finished piece 1 at 28-DEC-10
    piece handle=prodarchbackup_PROD_667_738921153 tag=TAG20101228T075233 comment=API Version 2.0,MMS Version 5.5.2.0
    channel t2: backup set complete, elapsed time: 00:00:03
    channel t3: finished piece 1 at 28-DEC-10
    piece handle=prodarchbackup_PROD_668_738921153 tag=TAG20101228T075233 comment=API Version 2.0,MMS Version 5.5.2.0
    channel t3: backup set complete, elapsed time: 00:00:03
    Finished backup at 28-DEC-10
    Starting Control File and SPFILE Autobackup at 28-DEC-10
    piece handle=c-148294895-20101228-00 comment=API Version 2.0,MMS Version 5.5.2.0
    Finished Control File and SPFILE Autobackup at 28-DEC-10
    released channel: t1
    released channel: t2
    released channel: t3
    *<< I expect the rman shell script to exit at this point and 'die' >>>>*

  • RMAN Script is not allocating channels

    I have a customer who is running a Solaris Server with Oracle 9i and is trying to backup using an RMAN script to define the channels to back up to through Networker.
    The script is as follows:
    run {
    allocate channel t1 type "sbt_tape";
    allocate channel t2 type "sbt_tape";
    send 'NSR_ENV=(NSR_SERVER=XXXX,NSR_DATA_VOLUME_POOL=Default)';
    sql 'alter system archive log current';
    change archivelog all crosscheck;
    set command id to 'bkrs';
    backup
    filesperset 20
    archivelog all
    delete input;
    release channel t1;
    release channel t2;
    Normally there are 3 channel allocations, but for some reason this does not work. He can only get 1 channel to work at a time which is impacting Backup Performance.
    There are no errors logged in the log files which is also odd. The device parallelism is 4 under Networker
    The version of Networker is 7.1
    Anyone else had any similar issues - I have been scratching my head on this for a while, or if anyone has any ideas on how to troubleshoot this I would appreciate any help
    Thanks

    I have now found some error information. Please see below.
    RMAN-00571: ======================================
    RMAN-00569: ===== ERROR MESSAGE STACK FOLLOWS =====
    RMAN-00571: =======================================
    RMAN-03009: failure of allocate command on t1 channel at 04/08/2004 10:37:02
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27211: Failed to load Media Management Library
    Any help much appreciated !!!!!

  • RMAN script failed while creating Data Guard 11g

    Hi Friends,
    I am creating Physical Standby (11g) using RMAN (ACTIVE) on windows using the doc : Step by Step Guide on Creating Physical Standby Using RMAN DUPLICATE...FROM ACTIVE DATABASE [ID 1075908.1]
    The folder structure on Primary DB and on Physical Standby is totally different.
    while executing RMAN script i got errors for lot of locations and i specified the proper location in RMAN script itself (ex set diagnostic_dest = 'c:\app\' , set db_recovery_file_dest='C:\app\flash_recovery_area')
    Location of control files on Primary DB:
    D:\oradata\MESSTG\CONTROL01.CTL
    D:\oradata\flash_recovery\messtg\MESSTG\CONTROL02.CTL
    Location of control files (planned) on Physical Standby DB:
    C:\app\oradata\MESSTDBY\CONTROL01.CTL
    C:\app\flash_recovery_area\MESSTDBY\CONTROL02.CTL
    How to specify control file location of Physical standby in set control_files?
    Also i have 2 control files on Primary DB so do i need to specify both the control files , if so how?
    I tried different combination in RMAN script but all are failed:
    set control_files='D:\oradata\MESSTG\CONTROL01.CTL','C:\app\oradata\MESSTDBY\CONTROL01.CTL'
    RMAN Error is :
    while using set control_files=: C:\app\oradata\MESSTDBY\CONTROL01.CTL
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format 'D:\ORADATA\MESSTG\CONTROL01.CTL';
    restore clone controlfile to 'C:\APP\ORADATA\MESSTDBY\CONTROL01.CTL' from
    'D:\ORADATA\MESSTG\CONTROL01.CTL';
    executing Memory Script
    Starting backup at 16-APR-13
    channel prmy1: starting datafile copy
    copying standby control file
    released channel: prmy1
    released channel: prmy2
    released channel: prmy3
    released channel: prmy4
    released channel: stby
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 04/16/2013 14:18:41
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on prmy1 channel at 04/16/2013 14:18:41
    ORA-17628: Oracle error 19505 returned by remote Oracle server
    RMAN>
    Error 2)
    while using set control_files='D:\oradata\MESSTG\CONTROL01.CTL','C:\app\oradata\MESSTDBY\CONTROL01.CTL'
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format 'D:\ORADATA\MESSTG\CONTROL01.CTL';
    executing Memory Script
    Starting backup at 16-APR-13
    channel prmy1: starting datafile copy
    copying standby control file
    released channel: prmy1
    released channel: prmy2
    released channel: prmy3
    released channel: prmy4
    released channel: stby
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 04/16/2013 13:22:33
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on prmy1 channel at 04/16/2013 13:22:33
    ORA-17628: Oracle error 19505 returned by remote Oracle server
    RMAN>
    Regards,
    DB

    Hi,
    Can you paste here you rman script ?
    I think following script can help you.
    duplicate target database for standby
    from  active database
    spfile
      set "control_files"="d:\oradata\<standbydbuniquename>\CONTROL01.CTL"
      set "db_name"="<DBNAME>"
      set "db_unique_name"="<STANBYD DBA UNIQUENAME>"
      set "db_file_name_convert"="C:\app\oracle\oradata\<dbname>","d:\oradata\<standbydbuniquename>"
      set "log_file_name_convert"="C:\app\oracle\oradata\<dbname>","d:\oradata\<standbydbuniquename>"
      set "db_recovery_file_dest"="D:\fast_recovery_area"
    nofilenamecheck;C:\app\oracle\oradata\<dbname> - it is primary database dafiles location
    D:\oradata\<standbydbuniquename> - it is standby database datafile location.
    Don't forget creation of diagnostinc dests.
    Regards
    Mahir M. Quluzade

  • RMAN Script in Solaris

    Hi,
    I am running Following rman script through shell in Solaris 10.2 to validate the database:
    oracle@mtcetl # cat rman_validate.sh
    #!/bin/bash
    ORACLE_HOME=/u01/app/oracle/product/10g
    PATH=$ORACLE_HOME/bin:$PATH
    ORACLE_SID=mtcedwp
    export ORACLE_HOME ORACLE_SID PATH
    rman target / <<EOF
    CONFIGURE DEVICE TYPE DISK PARALLELISM 8;
    ALLOCATE CHANNEL d1 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d2 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d3 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d4 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d5 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d6 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d7 DEVICE TYPE DISK;
    ALLOCATE CHANNEL d8 DEVICE TYPE DISK;
    BACKUP VALIDATE DATABASE;
    RELEASE CHANNEL d1;
    RELEASE CHANNEL d2;
    RELEASE CHANNEL d3;
    RELEASE CHANNEL d4;
    RELEASE CHANNEL d5;
    RELEASE CHANNEL d6;
    RELEASE CHANNEL d7;
    RELEASE CHANNEL d8;
    EOF
    I am executing this script as follows:
    oracle@mtcetl # nohup ./rman_validate.sh &
    Then I receive following errors in the nohup.out file:
    input datafile fno=00125 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.385.702198275
    input datafile fno=00081 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.340.695129943
    input datafile fno=00090 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.349.695475749
    input datafile fno=00120 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads.380.700249057
    input datafile fno=00142 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.402.707084055
    input datafile fno=00131 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads.391.704194625
    input datafile fno=00093 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods1.352.696598449
    input datafile fno=00099 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods1.358.696598613
    input datafile fno=00124 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods1.384.700933397
    input datafile fno=00070 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_rds.329.676059403
    input datafile fno=00111 name=+MTCDATA_GRP/mtcedwp/datafile/atbitdscdrpart.370.697290733
    input datafile fno=00002 name=+MTCDATA_GRP/mtcedwp/datafile/undotbs1.261.654101459
    input datafile fno=00071 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods_sbscrbr_hist_jan07.330.680708683
    input datafile fno=00072 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods_sbscrbr_hist_jan07.331.680708755
    input datafile fno=00008 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_rpstry.268.654113363
    input datafile fno=00051 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_dds.310.662492431
    input datafile fno=00067 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_rds_tapin.326.667722723
    channel ORA_DISK_8: starting compressed full datafile backupset
    channel ORA_DISK_8: specifying datafile(s) in backupset
    input datafile fno=00004 name=+MTCDATA_GRP/mtcedwp/datafile/users.264.654101503
    input datafile fno=00146 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.406.707084307
    input datafile fno=00084 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.343.695237005
    input datafile fno=00075 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.334.695040959
    input datafile fno=00080 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.339.695129765
    input datafile fno=00153 name=+MTCDATA_GRP/mtcedwp/datafile/users.413.708271033
    input datafile fno=00014 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads.274.654113499
    input datafile fno=00130 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads.390.704194583
    input datafile fno=00145 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.405.707084139
    input datafile fno=00096 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ods1.355.696598533
    input datafile fno=00149 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_tds.409.707569511
    input datafile fno=00106 name=+MTCDATA_GRP/mtcedwp/datafile/undotbs1.366.696693453
    input datafile fno=00117 name=+MTCDATA_GRP/mtcedwp/datafile/atbitdscdrpart.377.697290949
    input datafile fno=00016 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_olap.276.654113543
    input datafile fno=00013 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_dds.273.654113489
    input datafile fno=00035 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads_indexes.295.654113845
    input datafile fno=00064 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads_tapout.323.667722723
    input datafile fno=00126 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads_tapout.386.701419275
    input datafile fno=00134 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_ads_tapout.394.704728861
    input datafile fno=00055 name=+MTCDATA_GRP/mtcedwp/datafile/atbi_dds.314.662492689
    channel ORA_DISK_1: backup set complete, elapsed time: 00:54:31
    channel ORA_DISK_3: backup set complete, elapsed time: 01:10:07
    channel ORA_DISK_2: backup set complete, elapsed time: 01:11:23
    channel ORA_DISK_4: backup set complete, elapsed time: 01:12:08
    channel ORA_DISK_6: backup set complete, elapsed time: 01:12:52
    channel ORA_DISK_7: backup set complete, elapsed time: 01:12:52
    channel ORA_DISK_8: backup set complete, elapsed time: 01:14:27
    channel ORA_DISK_5: backup set complete, elapsed time: 01:30:23
    Finished backup at 09-APR-10
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d1
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d2
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d3
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d4
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d5
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d6
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d7
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: ";"
    RMAN-01008: the bad identifier was: d8
    RMAN-01007: at line 1 column 17 file: standard input
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, c
    onfigure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, ren
    ormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
    RMAN-01007: at line 1 column 19 file: standard input
    RMAN>
    Recovery Manager complete.
    regards

    Thanks for the help.
    The command has finished now and I didn't get a chance to check the ps -ef command.
    As you see in my original post, I am using nohup to run the script in the background and its sending its output to nohup.out file. But in the content of nohup.out file, there is no mention of report generated by RMAN regarding how many blocks it found. Output is as follows:
    oracle@TEST # more nohup.out
    Recovery Manager: Release 10.2.0.3.0 - Production on Sat Apr 10 10:45:28 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: TEST (DBID=978723866)
    RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21>
    using target database control file instead of recovery catalog
    old RMAN configuration parameters:
    CONFIGURE DEVICE TYPE DISK PARALLELISM 8 BACKUP TYPE TO COMPRESSED BACKUPSET;
    new RMAN configuration parameters:
    CONFIGURE DEVICE TYPE DISK PARALLELISM 8 BACKUP TYPE TO COMPRESSED BACKUPSET;
    new RMAN configuration parameters are successfully stored
    allocated channel: d1
    channel d1: sid=208 devtype=DISK
    allocated channel: d2
    channel d2: sid=427 devtype=DISK
    allocated channel: d3
    channel d3: sid=198 devtype=DISK
    allocated channel: d4
    channel d4: sid=448 devtype=DISK
    allocated channel: d5
    channel d5: sid=127 devtype=DISK
    allocated channel: d6
    channel d6: sid=434 devtype=DISK
    allocated channel: d7
    channel d7: sid=143 devtype=DISK
    allocated channel: d8
    channel d8: sid=430 devtype=DISK
    Starting backup at 10-APR-10
    channel d1: starting compressed full datafile backupset
    channel d1: specifying datafile(s) in backupset
    input datafile fno=00108 name=+TEST_GRP/TEST/datafile/undotbs1.368.696699605
    input datafile fno=00040 name=+TEST_GRP/TEST/datafile/TEST_tds.300.656367299
    input datafile fno=00085 name=+TEST_GRP/TEST/datafile/TEST_tds.344.695237023
    input datafile fno=00076 name=+TEST_GRP/TEST/datafile/TEST_tds.335.695041023
    input datafile fno=00046 name=+TEST_GRP/TEST/datafile/TEST_tds.305.662491879
    input datafile fno=00039 name=+TEST_GRP/TEST/datafile/TEST_ads.299.654710687
    input datafile fno=00048 name=+TEST_GRP/TEST/datafile/TEST_ads.307.662492133
    input datafile fno=00049 name=+TEST_GRP/TEST/datafile/TEST_ads.308.662492197
    input datafile fno=00107 name=+TEST_GRP/TEST/datafile/undotbs1.367.696699507
    input datafile fno=00098 name=+TEST_GRP/TEST/datafile/TEST_ods1.357.696598585
    input datafile fno=00150 name=+TEST_GRP/TEST/datafile/TEST_tds.410.707569569
    input datafile fno=00155 name=+TEST_GRP/TEST/datafile/TEST_ads.415.709551523
    input datafile fno=00113 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.373.697290733
    input datafile fno=00003 name=+TEST_GRP/TEST/datafile/sysaux.262.654101493
    input datafile fno=00001 name=+TEST_GRP/TEST/datafile/system.260.654101443
    input datafile fno=00010 name=+TEST_GRP/TEST/datafile/TEST_lds.270.654113411
    channel d2: starting compressed full datafile backupset
    channel d2: specifying datafile(s) in backupset
    input datafile fno=00086 name=+TEST_GRP/TEST/datafile/TEST_tds.345.695237043
    input datafile fno=00136 name=+TEST_GRP/TEST/datafile/TEST_tds.396.705247353
    input datafile fno=00128 name=+TEST_GRP/TEST/datafile/TEST_tds.388.702478685
    input datafile fno=00087 name=+TEST_GRP/TEST/datafile/TEST_tds.346.695237103
    input datafile fno=00078 name=+TEST_GRP/TEST/datafile/TEST_tds.337.695129727
    input datafile fno=00045 name=+TEST_GRP/TEST/datafile/TEST_tds.304.662491639
    input datafile fno=00119 name=+TEST_GRP/TEST/datafile/TEST_ads.379.700249037
    input datafile fno=00050 name=+TEST_GRP/TEST/datafile/TEST_ads.309.662492253
    input datafile fno=00132 name=+TEST_GRP/TEST/datafile/TEST_ads.392.704194655
    input datafile fno=00101 name=+TEST_GRP/TEST/datafile/TEST_ods1.360.696598703
    input datafile fno=00097 name=+TEST_GRP/TEST/datafile/TEST_ods1.356.696598559
    input datafile fno=00127 name=+TEST_GRP/TEST/datafile/TEST_ods1.387.701852257
    input datafile fno=00077 name=+TEST_GRP/TEST/datafile/users.336.695041119
    input datafile fno=00116 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.376.697290909
    input datafile fno=00006 name=+TEST_GRP/TEST/datafile/owbindex.266.654113339
    input datafile fno=00066 name=+TEST_GRP/TEST/datafile/TEST_rds_post_paid_cdr.325.667722723
    input datafile fno=00068 name=+TEST_GRP/TEST/datafile/TEST_rds_tapout.327.667722823
    input datafile fno=00109 name=+TEST_GRP/TEST/datafile/TEST_tds_user.372.696949827
    input datafile fno=00110 name=+TEST_GRP/TEST/datafile/uat_users.371.697117641
    input datafile fno=00033 name=+TEST_GRP/TEST/datafile/TEST_tds_indexes.293.654113827
    channel d3: starting compressed full datafile backupset
    channel d3: specifying datafile(s) in backupset
    input datafile fno=00057 name=+TEST_GRP/TEST/datafile/undotbs1.365.696688443
    input datafile fno=00140 name=+TEST_GRP/TEST/datafile/TEST_tds.400.707083997
    input datafile fno=00083 name=+TEST_GRP/TEST/datafile/TEST_tds.342.695130467
    input datafile fno=00074 name=+TEST_GRP/TEST/datafile/TEST_tds.333.695040881
    input datafile fno=00079 name=+TEST_GRP/TEST/datafile/TEST_tds.338.695129749
    input datafile fno=00152 name=+TEST_GRP/TEST/datafile/users.412.707602603
    input datafile fno=00047 name=+TEST_GRP/TEST/datafile/TEST_ads.306.662492079
    input datafile fno=00133 name=+TEST_GRP/TEST/datafile/TEST_ads.393.704194691
    input datafile fno=00091 name=+TEST_GRP/TEST/datafile/TEST_ods1.350.696598015
    input datafile fno=00100 name=+TEST_GRP/TEST/datafile/TEST_ods1.359.696598683
    input datafile fno=00105 name=+TEST_GRP/TEST/datafile/TEST_ods1.364.696598825
    input datafile fno=00012 name=+TEST_GRP/TEST/datafile/TEST_sds.272.654113455
    input datafile fno=00069 name=+TEST_GRP/TEST/datafile/TEST_rds.328.676059355
    input datafile fno=00115 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.375.697290875
    input datafile fno=00118 name=+TEST_GRP/TEST/datafile/TEST_sds.378.698406119
    input datafile fno=00059 name=+TEST_GRP/TEST/datafile/TEST_tds_post_paid_cdr.318.667722719
    input datafile fno=00060 name=+TEST_GRP/TEST/datafile/TEST_ods_post_paid_cdr.319.667722719
    input datafile fno=00061 name=+TEST_GRP/TEST/datafile/TEST_ods_tapout.320.667722721
    input datafile fno=00062 name=+TEST_GRP/TEST/datafile/TEST_ods_tapin.321.667722721
    input datafile fno=00063 name=+TEST_GRP/TEST/datafile/TEST_ads_post_paid_cdr.322.667722721
    channel d4: starting compressed full datafile backupset
    channel d4: specifying datafile(s) in backupset
    input datafile fno=00154 name=+TEST_GRP/TEST/datafile/users.414.708271719
    input datafile fno=00135 name=+TEST_GRP/TEST/datafile/TEST_tds.395.705247313
    input datafile fno=00042 name=+TEST_GRP/TEST/datafile/TEST_tds.302.656520125
    input datafile fno=00073 name=+TEST_GRP/TEST/datafile/TEST_tds.332.695040819
    input datafile fno=00082 name=+TEST_GRP/TEST/datafile/TEST_tds.341.695130447
    input datafile fno=00147 name=+TEST_GRP/TEST/datafile/TEST_tds.407.707084333
    input datafile fno=00122 name=+TEST_GRP/TEST/datafile/TEST_ads.382.700249099
    input datafile fno=00144 name=+TEST_GRP/TEST/datafile/TEST_tds.404.707084111
    input datafile fno=00038 name=+TEST_GRP/TEST/datafile/TEST_ads.298.654710453
    input datafile fno=00102 name=+TEST_GRP/TEST/datafile/TEST_ods1.361.696598723
    input datafile fno=00094 name=+TEST_GRP/TEST/datafile/TEST_ods1.353.696598467
    input datafile fno=00044 name=+TEST_GRP/TEST/datafile/undotbs1.271.696679255
    input datafile fno=00015 name=+TEST_GRP/TEST/datafile/TEST_rds.275.654113509
    input datafile fno=00065 name=+TEST_GRP/TEST/datafile/TEST_ads_tapin.324.667722723
    input datafile fno=00031 name=+TEST_GRP/TEST/datafile/TEST_rds_dly_act_smry_jan07.291.654113807
    input datafile fno=00032 name=+TEST_GRP/TEST/datafile/TEST_rds_dly_act_smry_maxval.292.654113817
    input datafile fno=00036 name=+TEST_GRP/TEST/datafile/TEST_rds_indexes.296.654113879
    input datafile fno=00037 name=+TEST_GRP/TEST/datafile/dbatemp.297.654113889
    input datafile fno=00043 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist.303.656530541
    input datafile fno=00058 name=+TEST_GRP/TEST/datafile/TEST_tds_post_paid_src.317.667722667
    channel d5: starting compressed full datafile backupset
    channel d5: specifying datafile(s) in backupset
    input datafile fno=00011 name=+TEST_GRP/TEST/datafile/dba_activity.316.696605947
    input datafile fno=00104 name=+TEST_GRP/TEST/datafile/TEST_ods1.363.696598773
    input datafile fno=00151 name=+TEST_GRP/TEST/datafile/TEST_ads.411.707569675
    input datafile fno=00123 name=+TEST_GRP/TEST/datafile/TEST_ods1.383.700933365
    input datafile fno=00056 name=+TEST_GRP/TEST/datafile/TEST_rds.315.662492837
    input datafile fno=00112 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.369.697290733
    input datafile fno=00007 name=+TEST_GRP/TEST/datafile/owbuser.267.654113349
    input datafile fno=00017 name=+TEST_GRP/TEST/datafile/TEST_olap_audit.277.654113553
    input datafile fno=00018 name=+TEST_GRP/TEST/datafile/TEST_ods_cdr.278.654113587
    input datafile fno=00019 name=+TEST_GRP/TEST/datafile/TEST_ods_edr.279.654113597
    input datafile fno=00020 name=+TEST_GRP/TEST/datafile/TEST_ods_sms.280.654113631
    input datafile fno=00021 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist.281.654113639
    input datafile fno=00023 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist_maxval.283.654113657
    input datafile fno=00024 name=+TEST_GRP/TEST/datafile/TEST_ads_actvty_cube.284.654113691
    input datafile fno=00025 name=+TEST_GRP/TEST/datafile/TEST_ads_actvty_cube_jan07.285.654113701
    input datafile fno=00026 name=+TEST_GRP/TEST/datafile/TEST_ads_actvty_cube_maxval.286.654113711
    input datafile fno=00027 name=+TEST_GRP/TEST/datafile/TEST_ads_subss_status_fact.287.654113719
    input datafile fno=00028 name=+TEST_GRP/TEST/datafile/TEST_ads_subs_stts_fct_jan07.288.654113729
    input datafile fno=00029 name=+TEST_GRP/TEST/datafile/TEST_ads_subs_stts_fct_maxval.289.654113763
    input datafile fno=00030 name=+TEST_GRP/TEST/datafile/TEST_rds_dly_actvty_smry.290.654113773
    channel d6: starting compressed full datafile backupset
    channel d6: specifying datafile(s) in backupset
    input datafile fno=00089 name=+TEST_GRP/TEST/datafile/TEST_tds.348.695475571
    input datafile fno=00138 name=+TEST_GRP/TEST/datafile/TEST_tds.398.706176093
    input datafile fno=00041 name=+TEST_GRP/TEST/datafile/TEST_tds.301.656463415
    input datafile fno=00009 name=+TEST_GRP/TEST/datafile/TEST_tds.269.654113401
    input datafile fno=00088 name=+TEST_GRP/TEST/datafile/TEST_tds.347.695475473
    input datafile fno=00141 name=+TEST_GRP/TEST/datafile/TEST_tds.401.707084029
    input datafile fno=00121 name=+TEST_GRP/TEST/datafile/TEST_ads.381.700249081
    input datafile fno=00143 name=+TEST_GRP/TEST/datafile/TEST_tds.403.707084083
    input datafile fno=00092 name=+TEST_GRP/TEST/datafile/TEST_ods1.351.696598425
    input datafile fno=00095 name=+TEST_GRP/TEST/datafile/TEST_ods1.354.696598497
    input datafile fno=00103 name=+TEST_GRP/TEST/datafile/TEST_ods1.362.696598755
    input datafile fno=00148 name=+TEST_GRP/TEST/datafile/TEST_tds.408.707569461
    input datafile fno=00156 name=+TEST_GRP/TEST/datafile/TEST_rds.257.714381137
    input datafile fno=00114 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.374.697290735
    input datafile fno=00034 name=+TEST_GRP/TEST/datafile/TEST_ods_indexes.294.654113835
    input datafile fno=00022 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist_jan07.282.654113649
    input datafile fno=00053 name=+TEST_GRP/TEST/datafile/TEST_dds.312.662492551
    input datafile fno=00052 name=+TEST_GRP/TEST/datafile/TEST_dds.311.662492489
    input datafile fno=00054 name=+TEST_GRP/TEST/datafile/TEST_dds.313.662492619
    input datafile fno=00005 name=+TEST_GRP/TEST/datafile/owbdata.265.654113297
    channel d7: starting compressed full datafile backupset
    channel d7: specifying datafile(s) in backupset
    input datafile fno=00137 name=+TEST_GRP/TEST/datafile/TEST_tds.397.706176033
    input datafile fno=00139 name=+TEST_GRP/TEST/datafile/TEST_tds.399.706176127
    input datafile fno=00129 name=+TEST_GRP/TEST/datafile/TEST_tds.389.702542715
    input datafile fno=00125 name=+TEST_GRP/TEST/datafile/TEST_tds.385.702198275
    input datafile fno=00081 name=+TEST_GRP/TEST/datafile/TEST_tds.340.695129943
    input datafile fno=00090 name=+TEST_GRP/TEST/datafile/TEST_tds.349.695475749
    input datafile fno=00120 name=+TEST_GRP/TEST/datafile/TEST_ads.380.700249057
    input datafile fno=00142 name=+TEST_GRP/TEST/datafile/TEST_tds.402.707084055
    input datafile fno=00131 name=+TEST_GRP/TEST/datafile/TEST_ads.391.704194625
    input datafile fno=00093 name=+TEST_GRP/TEST/datafile/TEST_ods1.352.696598449
    input datafile fno=00099 name=+TEST_GRP/TEST/datafile/TEST_ods1.358.696598613
    input datafile fno=00124 name=+TEST_GRP/TEST/datafile/TEST_ods1.384.700933397
    input datafile fno=00070 name=+TEST_GRP/TEST/datafile/TEST_rds.329.676059403
    input datafile fno=00111 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.370.697290733
    input datafile fno=00002 name=+TEST_GRP/TEST/datafile/undotbs1.261.654101459
    input datafile fno=00071 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist_jan07.330.680708683
    input datafile fno=00072 name=+TEST_GRP/TEST/datafile/TEST_ods_sbscrbr_hist_jan07.331.680708755
    input datafile fno=00008 name=+TEST_GRP/TEST/datafile/TEST_rpstry.268.654113363
    input datafile fno=00051 name=+TEST_GRP/TEST/datafile/TEST_dds.310.662492431
    input datafile fno=00067 name=+TEST_GRP/TEST/datafile/TEST_rds_tapin.326.667722723
    channel d8: starting compressed full datafile backupset
    channel d8: specifying datafile(s) in backupset
    input datafile fno=00004 name=+TEST_GRP/TEST/datafile/users.264.654101503
    input datafile fno=00146 name=+TEST_GRP/TEST/datafile/TEST_tds.406.707084307
    input datafile fno=00084 name=+TEST_GRP/TEST/datafile/TEST_tds.343.695237005
    input datafile fno=00075 name=+TEST_GRP/TEST/datafile/TEST_tds.334.695040959
    input datafile fno=00080 name=+TEST_GRP/TEST/datafile/TEST_tds.339.695129765
    input datafile fno=00153 name=+TEST_GRP/TEST/datafile/users.413.708271033
    input datafile fno=00014 name=+TEST_GRP/TEST/datafile/TEST_ads.274.654113499
    input datafile fno=00130 name=+TEST_GRP/TEST/datafile/TEST_ads.390.704194583
    input datafile fno=00145 name=+TEST_GRP/TEST/datafile/TEST_tds.405.707084139
    input datafile fno=00096 name=+TEST_GRP/TEST/datafile/TEST_ods1.355.696598533
    input datafile fno=00149 name=+TEST_GRP/TEST/datafile/TEST_tds.409.707569511
    input datafile fno=00106 name=+TEST_GRP/TEST/datafile/undotbs1.366.696693453
    input datafile fno=00117 name=+TEST_GRP/TEST/datafile/TESTtdscdrpart.377.697290949
    input datafile fno=00016 name=+TEST_GRP/TEST/datafile/TEST_olap.276.654113543
    input datafile fno=00013 name=+TEST_GRP/TEST/datafile/TEST_dds.273.654113489
    input datafile fno=00035 name=+TEST_GRP/TEST/datafile/TEST_ads_indexes.295.654113845
    input datafile fno=00064 name=+TEST_GRP/TEST/datafile/TEST_ads_tapout.323.667722723
    input datafile fno=00126 name=+TEST_GRP/TEST/datafile/TEST_ads_tapout.386.701419275
    input datafile fno=00134 name=+TEST_GRP/TEST/datafile/TEST_ads_tapout.394.704728861
    input datafile fno=00055 name=+TEST_GRP/TEST/datafile/TEST_dds.314.662492689
    channel d1: backup set complete, elapsed time: 00:54:41
    channel d3: backup set complete, elapsed time: 01:10:07
    channel d2: backup set complete, elapsed time: 01:11:12
    channel d4: backup set complete, elapsed time: 01:12:18
    channel d6: backup set complete, elapsed time: 01:12:42
    channel d7: backup set complete, elapsed time: 01:12:57
    channel d8: backup set complete, elapsed time: 01:14:31
    channel d5: backup set complete, elapsed time: 01:30:28
    Finished backup at 10-APR-10
    released channel: d1
    released channel: d2
    released channel: d3
    released channel: d4
    released channel: d5
    released channel: d6
    released channel: d7
    released channel: d8
    RMAN>
    Recovery Manager complete.Edited by: Fahd Mirza on Apr 10, 2010 8:37 PM

  • RMAN script for hot backup (looking for code critic) code attached.

    Hello Guru's,
    I have been having soem trouble running a successful hot full rman backup nightly.
    We max our CPU load whenever our RMAN takes too long and conflicts with a Legato tape backup. I have a development server that I attempted to get a consistent backup time duration that is rock solid as to not conflict with the Legato backup time.
    I just found out about duration with RMAN scripts here is my code:
    #!/bin/bash
    #rman backup script for daily hot whole database backup
    at -f /hd1/rman_scripts/rman_backup 0600 tomorrow
    rman target/
    run {
    allocate channel d1 device type disk format '/path/%U';
    backup duration 1:00 partial minimize load database filesperset 1;
    backup as BACKUPSET tag '%TAG' database;
    backup as BACKUPSET tag '%TAG' archivelog all delete all input;
    delete noprompt obsolete;
    release channel d1;
    exit
    It completes the backup, but does not use the 1 hour allocated- it only uses 15 minutes on average and creates many files instead of normally three backup files.
    Here is the results from querying the v$rman_status table for operation,status,start_time:
    RMAN,FAILED, 17-OCT-06 0600
    BACKUP,FAILED,17-OCT-06 0600
    RMAN,FAILED,17-OCT-06 0606
    BACKUP,COMPLETED,17-OCT-06 0606
    BACKUP,COMPLETED,17-OCT-06 0606
    BACKUP,FAILED,17-OCT-06 0615
    RMAN,COMPLETED,17-OCT-06 1513
    REPORT,COMPLETED,17-OCT-06 1513
    DELETE,COMPLETED,17-OCT-06 1513
    However, the timestamps of the backupset files it creates is:
    06:15 and not 1513?????????????
    RMAN appears to have only taken 15 minutes to create the files, why do I have a completed timestamp from v$rman_status of 1513???
    Please advise and comment, I am just learning RMAN.

    Try to remove the DURATION option in your script.
    Here more details about that part.
    http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#i1010261
    Bye, Aron

  • How to pass a parameter into RMAN script

    Hello,
    I have the following rman script :
    run {
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\ora_df%t_s%s_s%p';
    This script called configure.rman is launch by a .bat script with the following command:
    rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman
    How can I pass a parameter into rman script, I want to pass an additional directory like this:
    rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman v_dir_name
    And use it in rman script:
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\$v_dir_name\ora_df%t_s%s_s%p';
    Is it a way to do this?
    Regards,
    Elodie

    One option would be to create a file called backup.bat with the following:
    echo run {
    echo CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    echo CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    echo CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    echo CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\%1\ora_df%t_s%s_s%p';
    echo } ) | rman target sys/sys12@orcl102and then call the script as:
    c:\> backup.bat backup_directory_name

  • RMAN script problem to create logical standby database !

    Dear Friends ,
    I am using Oracle10g database . I want to create a logical standby database . I create two database :
    Primary : orcl
    standby : orclsby1
    Every steps I followed successfully , but when I am going to create "standby database" from "primary database" using rman then I found the following error :
    The script is below which I have to run in Primary (orcl) database :
    Script :
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'orcl','orclsby1'
    set db_unique_name='orclsby1'
    set db_file_name_convert='/orcl/','/orclsby1/'
    set log_file_name_convert='/orcl/','/orclsby1/'
    set control_files='/u01/app/oracle/oradata/orclsby1.ctl'
    set log_archive_max_processes='5'
    set fal_client='orclsby1'
    set fal_server='orcl'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(orcl,orclsby1)'
    set log_archive_dest_1='service=orcl ASYNC
    valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orcl'
    Problem which I got :
    [oracle@localhost DG]$ rman target sys/sys123@orcl auxiliary sys/sys123@orclsby1
    Recovery Manager: Release 10.2.0.1.0 - Production on Mon Oct 19 15:58:17 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: ORCL (DBID=1227832857)
    connected to auxiliary database: ORCLSBY1 (not mounted)
    RMAN> @cr_phys_sby1.txt
    RMAN> run {
    2> allocate channel prmy1 type disk;
    3> allocate channel prmy2 type disk;
    4> allocate channel prmy3 type disk;
    5> allocate channel prmy4 type disk;
    6> allocate auxiliary channel stby type disk;
    7> duplicate target database for standby from
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "from": expecting one of: "dorecover, db_file_name_convert, nofilenamecheck, ;"
    RMAN-01007: at line 7 column 39 file: cr_phys_sby1.txt
    I try to edit the above script using 'nofilenamecheck' 'dorecover' etc. , but cannot resolve the problem . Would u plz help me .... where the problem is .
    Both databases are running on Oracle10g platform .
    Waiting for ur kind reply .. ...

    You need to:
    - create a SPFILE manually for standby database
    - use the RMAN command: DUPLICATE TARGET DATABASE FOR STANDBY
    - remove all SPFILE statements from RMAN script.

  • RMAN scripts & variables/parameters

    Hi
    We are using RMAN with TSM. There are a number of 9i and 8i databases. I tried to set the environment up to with as few scripts as possible to cover the variety of databases. I provide various variables/parameters to handle the differences between the various databases.
    In the 9i environment I "CONFIGURE" as much as possible to avoid setting changes in the actual backup script. That gives me a fairly clean generic backup script which also avoids manual channel allocations ie :
    run
    backup incremental level=0
    not backed up since time='SYSDATE-(8/24)'
    check logical
    filesperset=4
    format='/LVL0_%d_%T_%U'
    (database include current controlfile)
    plus archivelog format '/ARC_%d_%T_%U' delete all input;
    However due to the lack of "CONFIGURE" in 8i I cannot configure automatic channels. Therefor my script has to change to :
    run
    allocate channel ch01 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch02 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch03 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch04 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    backup incremental level=0
    check logical
    filesperset=4
    format='/LVL0_%d_%T_%U'
    (database include current controlfile)
    (archivelog all format '/ARC_%d_%T_%U' delete input);
    release channel ch01;
    release channel ch02;
    release channel ch03;
    release channel ch04;
    I have multiple database instances on the same server & would like to have a single generic script with a variable/parameter to change the "tdpo.opt" file for each instance. The alternate is to have a complete set of scripts for each DB instance with everything hard coded.
    The question is : Can I pass variables/parameters to a RMAN script? If yes, how do I go about it?
    Maybe there are other ideas out there to do this. The key to me in this whole execise is to reduce maintenance & increase flexibility.
    Your responses will be appreciated
    CM

    I was hoping to get away from building part of the backup script ie the channel allocation in the RMAN statement.Don't know how you expect to do this when it's required for 8i databases ?
    Well since you are looking to accommodate 8i & 9i database and you need to manually allocate channels for the 8i databases, then you could configure your script to include an IF..THEN block that will run one set of RUN commands if the database name that is passed in is in a certain list and run the other RUN block if it isn't. You could maintain two "here document" blocks, one for 8i and one for 9i. Therefore, all of the commands can reside in one generic script.
    For example, you could configure your single, generic script as:
    # add your logic checking here to see if a 9i database sid
    # was passed in as a parameter.  If so run the following code
    rman target / log=${sid}bkp_log append << !1
    run
    backup incremental level=0
    not backed up since time='SYSDATE-(8/24)'
    check logical
    filesperset=4
    format='/LVL0_%d_%T_%U'
    (database include current controlfile)
    plus archivelog format '/ARC_%d_%T_%U' delete all input;
    !1
    # if not run the following (ie. 8i databases)
    rman target / log=${sid}bkp_log append << !2
    run
    allocate channel ch01 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch02 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch03 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    allocate channel ch04 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin/tdpo_${ORACLE_SID}.opt)';
    backup incremental level=0
    check logical
    filesperset=4
    format='/LVL0_%d_%T_%U'
    (database include current controlfile)
    (archivelog all format '/ARC_%d_%T_%U' delete input);
    release channel ch01;
    release channel ch02;
    release channel ch03;
    release channel ch04;
    !2then you could call this generic script with the appropriate command line parameters.
    Hope I'm following your explanation/requirement.

Maybe you are looking for

  • Error in component monitoring

    hi experts,            i'm working on file2jdbc secnario,in component monitoring it occured an error like............. "Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML docu

  • MobileMe Gallery and problems with new password

    Hi. I'm using iPhoto 09, and have posted many MobileMe galleries over the years. Recently, I changed my MobileMe password. Now, iPhoto tells me that an "error occurred with the publication of album 'XYZ' Your MobileMe account information is not corre

  • My Form generate no pdf attachment in mail

    Hello all. I as newbe have designed an form in livecycle 8. My problem is that as i submit by mail i get no warning wich emailclient has te be used. But my hotmail wil start up and the form will amke a email with everting in it exept te pdf attacheme

  • Besst way to find a function module

    Hi there I am quiet new to ABAP and I am curiouse about how to best approach the search for a function module?? can u guys please tell me how you search for functions modules that preform a specific task. For example if I search for a function module

  • Failed to Save Document. and Not Supported. Error Message

    Post Author: dscoiho CA Forum: General I am using Crystal 10 and SQL Server. I have ran into instances when I try to save a report with data or save as I get Failed to Save Document. and Not Supported. error messages. Does anyone have a clue on why t