RoboHelp 8 & Chrome - webhelp displays more than once

Robohelp 8 (up-to-date on patches)
Webhelp - context sensitive
Problem when using Chrome
When a user clicks on a help link, the webhelp page displays. If the user opens another dialog in the application, the webhelp page displays again.
While not criticial, it is annoying. Any suggestions?
Thanks,
Julie

This is something your developers have to look into. It seems they are
opening a new window every time the help is called. Can they change the
help call so that the reuse the help window?
Kind regards,
Willam

Similar Messages

Header is displayed more than once

I have several records that I can display as a table just for checking out. It has several types of records.
I can delete this from the template in the future.
Now, I´d like to create a section for record type X.
I do have a logic like:
for-each record
if type='X'
table
end for each
It just happens that if I have more than one record of type X, the table (between the for-each) is display like:
header
row
header
row
etc
Pls... is there way to code a logic that shows the several records of type X but does not repeat the table header ?
txs for any help
Antonio

You could include the filter in the grouping code.
Something like:
<?for-each:/SUPPLIERLIST/G_VENDOR_NAME[Type = 'X']?> -- replace the grouping code per your data structure
Thanks,
Bipuser

Displaying the records records which are coming more than once

hi
create table temp(comp_id int,branch_id int);
comp_id | branch_id
---------+-----------
1000 | 1
1000 | 1
1000 | 2
1000 | 2
1000 | 3
2000 | 1
2000 | 1
2000 | 2
2000 | 3
how can i write a query which displays the records records which are coming more than once on the basis of fields comp_id and branch_id. e.g. 1000 | 1 should be displayed because it is coming more than once. 1000 | 3 should not be, because it has a single entry.

select comp_id, branch_id, count(*)
from temp
group by comp_id, branch_id
having count(*)>1
Please note this forum is not a SQL class and it is not the place to have your homework done.
Sybrand Bakker
Senior Oracle DBA

Use Topic in TOC more than once...

We have just purchased RoboHelp 6 for our Help System
generation as well as to begin developing online training courses.
I have a WebHelp File that contains 5 books - one book per
procedure. I have a topic that is applicable to two procedures.
Without having to make a copy of the topic, is it possible to set
up the TOC to use the topic in question more than once?
The problem arises when I am setting up the Browse Sequence.
I tried to set up the Browse Sequence using the Auto-create using
TOC...option, but the sequence appears to be in alphabetically
order. In fact, it is in no way, shape or form even close to the
TOC (as indicated in the Help - Topics in each browse sequence will
be in the same order as in the TOC)!!!
So, I tried to manually create the browse sequence. I used a
browse sequence to contain all topics, then I set up another browse
sequence to contain the duplicate topic. When I use the navigation
arrows to move through the toc, it will not advance to the second
browse sequnce.
Any ideas or suggestions would be greatly appreciated. Thanks
in advance.
Lisa

Hi LNT1
The trick to all this is to never directly link from the TOC
to the desired topic. Let's assume the TOC should have a topic
appearing in two different places. In order to make this work, you
link from two different redirect pages.
Now if you generate WebHelp, I see where there could be an
issue, because the browse sequence can only link from one topic to
another. In other words, a topic can only have a single link to and
a single link from it. So in this case, the redirect trick would
fail. However, another trick comes to mind that may work. Instead
of a Redirect page, you could have two different pages that instead
of redirecting, contained an Inline Frame (IFRAME) that simply
displayed the contents of the desired page. Basically, the pages
containing the IFRAME would link properly and provide the desired
effect.
For more on IFRAMEs, download my Tips and Tricks file and
scan it for how to create IFRAMES.
Cheers... Rick

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Weblogic.management.server bound more than once?

Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
up, I get the following message on both managed servers; the admin server, on the other hand, does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
Gene

Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
Gene
"Gene Chuang" <[email protected]> wrote in message news:[email protected]...
Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
up, I get the following message on both managed servers; the admin server, on the other hand,does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
Gene

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

Duplicate entries / Employee is appearing twice in report (OR more than onc

Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep Jadhav

Hi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma

Select the same attribute in a query more than once

Hi Experts,
My requirement is to select the same attribute in a query more than once.
How can I acheive this?
Expecting an early solution..
Pilliga

Hi,
Create a calculated attribute that just displays the "same attribute".
(Note: you will need to uniquely name this object).
For example, if you wish to display Emp Name twice in the same query, then create a calculated attribute called Emp Name2 and select it and Emp Name in your query and the same info will be displayed twice in your results set.
Cheers,
Tanish

Report to select customer ID occuring more than once

My report requirement is to capture transaction detail when a customer ID occurs more than once. Is there a way to do a sum count on the customer id in order to display the transaction detail. My current solution is to run a report where the customer count is greater than one, and then do a subquery against that data to display the transaction detail. I would like to be able to eliminate the subquery.

Hi,
You can create an analytic function to count the customer_ID per every transaction:
count(customer_id) over (partition by ..<enter the fields of the report>.....)
This will give for every transaction the number of transaction per same customer_id
Now that you have it you can create a condition on it so
that you will get only transaction with count customer_id > 1

How to use a picture more than once in the light table?

when i drag a picture from my browser to the light table i get the number 1 in the thumbnail. the book suggests that we can drag more than once the same picture in the light table but i have not yet figured out how to do it? any ideas?

Indeed it do, I have that book, and you and I have both proven, beyond any doubt, the authors are incorrect.
I tried all weekend to build a light table display that would print on half of a piece of paper. I figured I'd just select all, duplicate or copy and paste and set up another display just like it. That way, I'd print one sheet, trim it in half and have two nice assemblies of the same images. Took me many hours of dicking around to arrive at my lame non-solution.
Hope someone else gives us both better advice.
bogiesan

Display more than 8 traces in NI hypertrend

Hi
I am having difficulty in displaying more than 8 traces in hypertrend. I am able to see them if I double click on the names in the legend. But I want it to be set programatically. I have tried the visible property node which doesn't do anything. Can anyone help me?
Thanks
Sala

After looking into your question, I could find no way of changing the number of plots that are displayed on the NI Hypertrend ActiveX object by default. However, once a plot has been added by double clicking on its name in the plot legend, it will stay displayed if the VI is saved, even after restarting LabVIEW.
The closest I could come to programmatically displaying a plot is to make individual plots visible or invisible, however, this requires the plot to be displayed in the plot legend as previously mentioned -- it seems there are two properties, whether the plot is "displayed" as in the plot legend, and whether it is "visible". If the plot is "displayed" you can programmatically change the visibility, but the ActiveX control does not allow you to programmatically change whether a plot is "displayed", at least not that I could determine. The attached VI shows how to do this. you will need to alter the tags that the NI Hypertrend is trying to plot to your own tags.
Attachments:
nihypetest.vi ‏52 KB

Facebook is showing more than once in the HUB !

Dear All,
I noticed that my Facebook is showing more than once in the HUB ! and everything instance of it is displaying something different than the other. Old instances are displaying old notifications that I have deleted a long time ago!
Each time a login and logout of the Facebook app, a new instance is created inside the HUB ! it seems that there is a serious bug in either the HUB or Facebook !!
How can I fix this ?
Yasser Youssef
Solved!
Go to Solution.

found the solution here:
http://forums.crackberry.com/blackberry-z10-f254/two-facebook-accounts-showing-hub-834878/
thanks FB developers !!!
Yasser Youssef

Heading level hierarchy errors when topics are in TOC more than once

I have discovered that the hierarchy in the Heading levels in
the Printed Documentation will differ from than in my online help
table of contents hierarchy, and that the problem is due to topics
that are intentionally in the TOC more than once.
For example, in chapter 5 of a particular help system the
hierarchy should be:
Heading 1 < Chapter 5 title from top-level book>
Heading 2 <title of second level book>
Heading 3 <title of topic that appears under second-level
book>*
What I actually get is:
Heading 1 < Chapter title from top-level book>
Heading 2 <title of second level book>
Heading 4 <title of topic that appears under second-level
book>*
* This same topic appeared in an earlier chapter. In that
chapter it was really at a Heading 4 level.
Due to company styles, etc. we use a numbering system at the
headings and in the TOC, so instead of
5
5.1
5.1.1
I erroneously get
5
5.1
5.1.1.1
This type of hierarchy issue appears multiple times in this
particular document (which I inherited by the way.)
Other than restructuring the document to not reuse topics in
different places in the TOC, is there a solution or a workaround
for this problem?
What I am doing so far, is generating the Print Documentation
one chapter at a time. As long as a topic is not reused with the
same chapter, my hierarchy of heading levels is maintained;
otherwise, it is not. Then I can put the chapters back together
after fixing the few places that still have heading level problems.
This however, will be quite cumbersome as this document is
translated into nine other languages.
I am using RoboHelp X5 for Word / Word 2003 for the source
and most of the translations; RoboHelp Asian Edition, Simplified
Chinese / Word 2003 for the Chinese translation. The heading level
hierarchy error occurs in both versions.

>> AF: I've commented in sections...
Without Maintain Heading Levels, RH will apply heading levels
to the books and then the topic levels will get bumped down. So a
top level book will be Heading 1 and the Headings in the topic will
get bumped down to 2, 3 and 4 etc. If then you have another book
one level down so that it gets Heading 2 applied, the same topic
but under the level two book would then get 3, 4 and 5 applied.
That is not the original problem but hopefully we are agreed
that is how things work on that.
>> Yes - that is the expected behavior. When it didn't
happen as expected, that's what led me to the discovery of the
cause of the problem (topic reuse).
Your problem was that firstly Heading 3 got bumped to Heading
4 if the same topic was inserted into the TOC twice. I assume it
was OK in the first instance, or is it that when you add it twice
it goes wrong everywhere?
>> Your assumption is correct. First occurrence is
correct. Second, third, and fourth (yes - there is one topic that
is used 4 times! ) are not correct based on TOC hierarchy.
On the numbering, nothing surprises me. If you look at my
site you will see that for RH HTML, i gave up on getting it right.
I have had many queries on this and more than a few people have
indicated they will work on the problem and get it working. I'm
still waiting. There are many posts about outline numbering
problems. Has anyone got it working satisfactorily?
>> I don't really have numbering problems. The
numbering is following the RoboHelp-generated hierarchy and the
.dot template that I apply. It's just that the RH-generated
hierarchy and its heading levels don't correspond to the "real"
hierarchy because of the reuse issue.
I have seen various Word gurus maintain that numbering has
not worked entirely satisfactorily since Word 2! Also enough posts
to convince me this is a Word issue, not a RH issue.
If you want to create a new project and knock something up
that demonstrates this problem, by all means zip it up and send it.
I'll assume it will be a small project and zip to less than 5mb. If
more, contact me first.
>> Unless you have RoboHelp X3 Asian Edition,
Simplified Chinese, there is really no need. I plan to either avoid
the reuse issue in the source, or build the print doc in sections
which is easy enough in RoboHelp X5 for the non-Chinese languages.
It is in the older Asian edition where the problems are compounded
by the omitted reuse topics. If you do have RoboHelp X3 Asian
Edition, Simplified Chinese and want to experiment, I can send you
a cut-down version of the project. Don't feel obligated though;
unless you can read Chinese (I can't) it is very tedious to work
with.

Running the VI more than once, won't populate the array correctly!

I have found something pretty weird while I was trying to do the following:
I have an Array to wich I want to append a new set of data from two sources. To do
this I found two different ways:
1. I can take the array and append every element (from the sources of new data) to
the array.
2. Or, I can create a new array, and append it to the previous one.
Every of those solutions is ilustrated in the enclosed VIs. But the second one
doesn't work correctly. If we run it just once, it will display the correct data,
but if we run it more than once, it will show the cells of the appended data
empty!!!
How come this happens? It seems I'm missing something very basic and i
mportant.
Thank you for your time and help.
Regards,
JAVIER
Attachments:
1_This_is_the_working_solution.vi ‏20 KB
2_Why_does_this_doesnt_work.vi ‏24 KB

Hi,
actually you don't need to add elements continiously to each other or to the array.
The basic solution is to form the appropriate array and insert it into your array.
I have made the example.
Good luck.
Olrg Chutko.
Attachments:
Solution3.vi ‏20 KB

RoboHelp 8 & Chrome - webhelp displays more than once

Similar Messages

Maybe you are looking for