Roll Back of CAS
Hi All,
Somehow my CAS server got currupted during SCCM 2012 R2 upgrade. Now i'm unable to recover It. Can anyone helpw me to get it back as it was before. Here is the steps we did -
1. Tried to recover it from Backup but no luck
2. Tried to recover from SQL backup. no luck
3. Tried to recover from Primary site. no luck
any help on it will be highly appreciated.
Rakesh Kumar
Hi,
I suggest you try to build a site on a new machine using same settings, then recover the site from the backup.(offline the old machine)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
Hello,
If i read your question correctly you are asking about how uncommited transaction are rolled back.For this, concept of transaction log came into picture.where first changes were first made to transaction log and then into memory .Before any change is made
to real data file change is made to trn log files so that if rollback comes it can see in log and rollback it.
I would suggest you to read Famous article by log which will explain you
http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Insert Statements on Databsae to be rolled back in case of failure
Hi Friends,
We are developing a Scenario where we r supposed to Insert Records in three
Tables.
We have developed three different Interfaces for it.
The Requirement is that even when 1st two Insert Interfaces are successful and
the third interface is failing,we have to Rollback the first two interfaces
How to go abt abt doing it?
Any helpful answer wld be rewarded.
Thanks,
Nilakantan.SCan you club all the three interfaces in one by using mapping. Then you could use SQL in adapter or stored procedure to insert. I don't see any other way.
KK -
According to
MSDN SqlTransaction.Rollback() method must throw InvalidOperationException in case the transaction has already been committed or rolled back.
However, in my tests I don't get any exceptions. Here is the code:
CREATE PROCEDURE dbo.USP_TEST_TX_PROC
AS
BEGIN
SELECT 1/0;
ROLLBACK TRANSACTION;
END
GO
using(SqlConnection con = new SqlConnection(@"Data Source=XXX;Initial Catalog=TestDB;Integrated Security=True"))
con.Open();
SqlTransaction tr = con.BeginTransaction();
SqlCommand cmd = new SqlCommand("dbo.USP_TEST_TX_PROC", con, tr) { CommandType = CommandType.StoredProcedure};
try
cmd.ExecuteNonQuery();
tr.Commit();
catch (Exception ex)
try
tr.Rollback();
catch (Exception ex2)
Console.WriteLine(" Message: {0}", ex2.Message);
What am I doing wrong?
Thank you.
AlexeyHello Alexey,
I created a client side demo which could throw the InvalidOperationException:
using (SqlConnection connection = new SqlConnection(@"Server=(localdb)\Projects;Database=DFDB;Trusted_Connection=True;"))
connection.Open();
SqlCommand command = connection.CreateCommand();
SqlTransaction transaction;
transaction = connection.BeginTransaction("SampleTransaction");
command.Connection = connection;
command.Transaction = transaction;
try
command.CommandText = "ProInsertIntoOrder 1,'1'";
command.ExecuteNonQuery();
transaction.Rollback();
throw new Exception();
catch (Exception ex)
// Attempt to roll back the transaction.
try
transaction.Rollback();
catch (InvalidOperationException ex2)
Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType());
Console.WriteLine(" Message: {0}", ex2.Message);
You could have a try. However, it is not clear why it could detect the ROLLBACK statement on the server side, I suggest that you could post this feedback to:
https://connect.microsoft.com/VisualStudio/feedback/LoadSubmitFeedbackForm
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Rolling back of Quick Pay Pre-payment and Quick Pay in case of void cheque
Hi All
I am facing an issue if you can help me out of if
Here is a scenario
a payroll manager runs the following processes.
1. Payroll run
2. Pre-Payments
3. Payroll Archiver
4. Payment Output file
After running all these process payroll manager finds that he also has to make an adhoc payment on account of car loan of AED 150,000.
So he runs following processes
1. Quick pay for Car loan
2. Quick pay pre-payments (payment made through check)
3. payroll archiver
4. Cheque Writer.
Now due to some technical fault, alignment on printing of cheque becomes disturbed there for cheque misprinted.
Payroll manager runs Void Cheque process to cancel the cheque.
After all these processes which has run successfully, order comes from upper management to rollback quickpay for adhoc payment of loan.
Now question is how it can be achieved.
I tried different things as follows
On Assignment Process results screen i queried the assignment which all the processes in descending order.
I tried to start roll back from cheque writer but system didn't allowed to do this because of check Void process.
I tried to start rollback from Magnetic report, system allowed to roll it back.
Then i tried to rollback Quick-pay prepayment, system did not allow me be do it. There fore i couldn't run rollback for Quick-pay.
There is an another thing i tried.
On "Assignment Process Result" screen i queried assignment. Then i delete the first entry of Void cheque by using delete option from menu bar on top and saved the record. then i delete cheque writer entry and saved the record. Then i run rollback for quick pay pre-payments and ran it successfully and then lastly i ran rollback for quick pay run.
One thing cautioned me that if I delete the void cheque entry then its history may be lost or have lost and on the other hand with out deleting void cheque i cannot proceed to rollback quick pay.
Kindly tell me the best way to run rollback for quick pay in this situation.
Regards
MajidBt do not provide broadband only so you need existing account holder to add broadband to phone account and then you can pay back the account holder - probably not what you want
the 12 months advance applies to the line rental not the broadband - as I said BT do not sell broadband only you buy a package which includes phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Data Services job rolling back Inserts but not Deletes or Updates
I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley -
I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
Folks,
I'm trying to post the GR thru MIGO for the scheduling agreements and I'm getting this error:
"Posting only possible in periods 2009/04 and 2009/03 in company code____"
I'm trying to post in the current month " Jan 2009".
I checked OMSY and current period is 042009.
I know we can close the periods thru MMPV/MMPI but in this case these periods are already closed and current open period is only two months after (042009).
Is there any way we can roll back to the closes periods and posting can be done in the existing period??
We are in our dev environment but any heads up of this would be greatly appreciated!!
Thanks for your help in advance,
Cheers,
DhavalHey there,
Thanks for the heads up. However I think that MMRV will only allow posting in the previous closed period which in this case would be 032009.
But I'm not sure if this will help me if I would want to post in 012009 or 022009.
I'd appreciate if you could shed some more light on this.
cheers.
Dhaval -
FUNCTION MODULE TO COMMIT & ROLL BACK.
Hi all,
I am working on an interface , in case power interruptions while running file extraction, the program should roll back completely and the the file should be scheduled later.
could any body give suggest me the solution and the function module name .
Regards
SreHi,
for BAPI's to commit use FM BAPI_TRANSACTION_COMMIT
to undo all the changes use FM BAPI_CHARACT_ROLLBACK -
I have a Windows 7 OS 64 bit, ZT desktopcomputer with 16meg memory. I have not been able to install any updates
to itunes to my computer. It downloads, but then when installing, it looks like it is going to complete the install
and then it rolls back and says the errors occured and to try again. I have a win7 64bit HP Laptop that installed
the itune updates with no problem. I have to sync my iphone to my Laptop as it will not work with my desktop.
Please advise.
Thanks,
RogerDo you have any other drive connected, which has a copy of FCP X?
I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
Then, try installing from the purchases tab in the App Store. -
My iPhone 5s can no longer use Internet on a wifi network. I've reset everything, how can I roll back to iOS 7?
i Was considerinf buying a macbook pro, but am reconsidering spending such an amount of money on a company that can screw up such a basic function. I mean you can have your iOS 8 back if this is what it means, I don't want to use your health Kit app.You cannot 'roll back' your iOS. That's never been supported or allowed by Apple (with only one exception).
Use this article: iOS: Troubleshooting Wi-Fi networks and connections - Apple
It's not the iOS. It may be a setting on your iPhone or the wi-fi network, or a hardware issue. But it's not the iOS. If it was, then everyone's iPhone 5S using the same iOS would not be working, and that's not the case.
Troubleshoot your issue. -
Roll back to itunes 10.7 from itunes 11
Recently my iMac updated to iTunes 11 automatically as part of its update process. I find that I hate this new version of iTunes and so I tried to roll back to the previous version (10.7 in my case). I figured out how to uninstall / delete iTunes 11, I downloaded the previous version from apple.com and ran the installer. I restored my previous iTunes Library file and openned iTunes. All my playlists, play counts, etc are there appropriately and everything looks good at first glance. However, my iPod and iPad can no longer sync and iTunes is telling me to restore them both to factory settings which I'd rather not do. I also can no longer connect to my iTunes library via my local area network from my Windows based machines (haven't been able to try from another Mac, yet). Any ideas on what I did wrong and more importantly how to fix these annoying problems? Thanks!
Thanks. This may work for the iPod and iPad although I'm not terribly interested in reorganizing all the apps and data on both devices unless absolutely necessary. Also, this does not address the problem of not being able to access the library over the LAN from other computers running iTunes.
-
Statement in Transaction Does Not Roll Back
I have a group of MySQL statements in a method of a Java application.
I include an SQL error in the last statement to test the rollback of the transaction.
All the statements roll back, EXCEPT for the one detailed below.
The MySQL table:
CREATE TABLE Counter (
number INT( 4 ) NOT NULL DEFAULT 0,
account_id VARCHAR( 12 ) NOT NULL PRIMARY KEY
) ENGINE = InnoDB;I have run the staement as a PreparedStatement and a Statement:
PreparedStatement:
String updateCounterStr =
" UPDATE Counter " +
" SET number = number + 1 " +
" WHERE account_id = ? "
updateCounter = con.prepareStatement ( updateCounterStr );
updateCounter.setString( 1, accountID );
int uc = updateCounter.executeUpdate(); Statement:
Statement updateCounterStatement = con.createStatement();
int updatecounter = updateCounterStatement.executeUpdate(
"UPDATE Counter SET number = number + 1 " +
"WHERE account_id = \'" + accountID + "\'"
con.setAutoCommit( true ); // ------------------------------------ Transaction ENDS
updateCounterStatement.close();
// updateCounter.close();
... several more
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
if (con != null) {
try {
System.err.print("Transaction is being ");
System.err.println("rolled back");
con.rollback(); // < ------------------------------------ con.rollback() HERE
} catch(SQLException excep) {
System.err.print("SQLException: ");
System.err.println(excep.getMessage());
} // ---------------------------------------- END the methodIn both cases Counter is incremented, but does NOT roll back.
The other statements in the transaction do roll back,
I am using:
mysql Ver 14.12 Distrib 5.0.18, for apple-darwin8.2.0 (powerpc) using readline 5.0
on Mac OS X 10.4.x
I would greatly appreciate a solution to this problem.
Many thanks in advanceI think autocommit is true by default. Also, it looks like your'e setting it to true, and then executing more SQL.
Explicitly set it to false, and DON'T set it back to trueif there's any chance you're going to want to rollback after that. -
ALSB 3 roll back a transaction without sending a fault message
Hi,
I have a proxy service exposed as a web service, which has some operations that call some tuxedo systems, do some transformation of the data, etc.
When any of it's operations is invoked I have to build an XML reply in both success AND error cases. The difference between both is a response code, if the call to the backend tuxedo system responded with a stream that starts with OK then everything is fine and I build the reply and send it back, but if an error ocurred it will send back an stream that starts with ER followed by an error code, with which I will have to build the SAME XML but using this error code and send it back to the client instead as a "successful" invocation instead of sending a SOAP fault message. Also I need to roll back the whole transaction in that error case. The system works like that and it can't be changed, we are building this proxy service based on a WSDL file given to us by the partner company that invokes our service and there's lots of other clients that do it in the same way. The problem is that I haven't found a way to roll back the transaction without making the proxy service send a fault message that the client system won't understand. The "Raise error" and "Reply with failure" do roll back the transaction but both send a fault message. Is there a way to answer "successfully" to the client but make an explicit rollback?Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil -
Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
RavitejaHi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K
Maybe you are looking for
-
Using xmldom.writeToClob to update xml clob corrupts clob
We are storing an xml document in a clob field in the db. As part of a data check we need to parse the xml and possibly remove a node. I can do that, and check the results using 'xmldom.writeToBuffer'. When I try to write the data back to the db usin
-
Communication Protocols while Calling a BPEL from another BPEL
Hi, I was just curious to understand that what is the protocol that gets used when a BPEL WS is called from another BPEL using Partner Link ? Is it SOAP over HTTP or some internal network call in the BPEL engine. If someone can point to a detailed do
-
Getting an American iMac in Taiwan
Hi there. I'm an American. Like most Americans, I speak English, and I speak very little, if any Mandarin. I'm a Ph.D. student, and I'm trying to buy an English-language iMac with a student discount. There are two slight problems. 1) I'm in Taiwan, a
-
I was using a PC with my iPAD2. PC has died. I have bought a MacBook Air. I have managed to transfer iTunes from iPAD2 to Air. However, cannot fuigure out how to sync apps onto my Air? This is critical because iPAD has a failing battery and it will b
-
i have problem with the charge draing on my iphone 5, i replaced the battery and software as the technician suggested, still am sugfering with the same. please help me if anyone knows the solution for that thank you vishnu p