ROW TO COLUMN - LI'L BIT DIFFERENT

I have a table which can be representated by following table
MAT     DPT     GRP     VAL
X1103     A1101     1     112
X1104     B1101     2     3213
X1105     C1104     3     54
X1106     D1101     2     5231
X1107     E1102     3     878
X1108     E1102     9     6
X1109     F1103     15     2844
X1110     J1103     1     21588
X1111     C1104     2     3288
X1112     C1104     6     1864
I want to convert this as
DPT     GRP:1     GRP:2     GRP:3     GRP:9     GRP:15     GRP:6
A1101     112     0     0     0     0     0
B1101     0     321321     0     0     0     0
C1104     0     3288     54     0     0     1864
D1101     0     5231     0     0     0     0
E1102     0     0     878     6     0     0
F1103     0     0     0     0     2844     0
J1103     21588     0     0     0     0     0
Here, GRP and VAL is dynamic. I want to make a report where the DPT values are in Rows and GRP is in Columns and the VAL is summed up.
can it be done with some function / sql statement?
Please help.
Regards,
Git

Hi, Gitesh,
Thanks for posting the CREATE TABLE statement. Don't forget to post INSERT statements for a little sample data, and the results you want from that data.
The amount of sample data in your first message (10 rows) is much easier to manage and to understand than the amount in the link in your last message. Why not use the 10 rows from your first message? Whatever you decide, post the INSERT statements and the (formatted) results you need form that data.
Remember to use tags around formatted text, such as output and code.
It looks like the code you posted in your last message is doing both string aggregation and dynamic pivoting. (Since it's not formatted, I can't read it very carefully.) There's no need to do both. Would you prefer to have separate columns for each group, or to have one big VARCHAR2 column, formatted to look like separate columns?
If you want separate columns, that will probably require dynamic SQL, whcih can be simplified by using front-end features. For example, if your front-end is SQL*Plus, you can use substitution variables or SPOOL to do dynamic SQL. What front-end are you using?

Similar Messages

How Calculate more than one value and store it into to different rows and column for each input?

thx guys.....i have a progress now in LV
But now i have new trouble here. Ok i attached my LV file (LV 7.0.1/7.1) and excel form. I just could'nt calculate more than one input value. I want a different result for each value that i enter ... and store it into different rows and column. But it just store at one row.
Attachments:
My Project.vi ‏31 KB
rumus motor bakar.xls ‏14 KB

duplicate post

Better approach for checking column values between two different rows

My requirement is to find best Approach to find difference between column values of two different rows.Below I've mentioned two different
approaches I'm thinking of,but I'd like to know is there any other better approach.
version details
SQL> SELECT *
2 FROM V$VERSION;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE    11.1.0.7.0      Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionTable creation script
CREATE TABLE R_DUMMY
   (CA_ID VARCHAR2(16) NOT NULL ENABLE,
     CA_VER_NUM NUMBER(4,2) NOT NULL ENABLE,
     BRWR_SHORT_NAME VARCHAR2(25 CHAR),
     sic_code     number,
     FAC_ID VARCHAR2(10) NOT NULL ENABLE
/ insert script
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 2.00, 'Nandu',1234, 'FA000008');
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 3.00, 'SHIJU',456, 'FA000008');Desired O/P :
ca_id               fac_id          column_name          previous name          after_modification
CA2001/11/0002          FA000008     BRWR_SHORT_NAME          Nandu               SHIJU
CA2001/11/0002          FA000008     sic_code          1234               456My approach
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,lag_brwr,ld_brwr,ld_sic,lag_sic
          from
                    Select      lead(brwr_short_name,1) over(partition by ca_id,fac_id) ld_brwr,
                         lag(brwr_short_name,1) over(partition by ca_id,fac_id) lg_brwr,
                         lead(sic_code,1) over(partition by ca_id,fac_id) ld_sic,
                         lag(sic_code,1) over(partition by ca_id,fac_id) lg_sic,
                         ca_id,fac_id
                    from r_dummy
          where (ld_brwr != lg_brwr or ld_sic != lg_sic)
)2nd Approach :
=============
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,brwr_short_name,sic_code
          from
                    Select      ca_id,fac_id,brwr_short_name lg_brwr,sic_code lg_sic
                    from     r_dummy
                    where     ca_ver_num = '2.00'
               )o,(
                    Select      ca_id,fac_id,brwr_short_name ld_brwr,sic_code ld_sic
                    from     r_dummy
                    where     ca_ver_num = '3.00'
                        )n
          where      0.ca_id = n.ca_id
               and 0.fac_id = n.fac_id
               and (ld_brwr != lg_brwr or ld_sic != lg_sic)
)Hi Experts,
     I've provided sample data where I'm checking for just two columns viz brwr_short_name ,sic_code,but in real time
I've to check for 8 more columns so please suggest me with a better approach.
I appreciate your precious suggestions.

Hi,
Thanks for posting the CREATE TABLE and INSERT statements; that really helps!
Here's one wa. Like your 2nd approach, this uses a self-join:
WITH     got_r_num     AS
     SELECT ca_id
     ,     ROW_NUMBER () OVER ( PARTITION BY ca_id
                               ,                    fac_id
                         ORDER BY        ca_ver_num
                             )    AS r_num
     ,     brwr_short_name
     ,     TO_CHAR (sic_code)     AS sic_code
     ,     fac_id
--     ,     ...     -- Other columns (using TO_CHAR if needed)
     FROM     r_dummy
,     unpivoted_data     AS
     SELECT     *
     FROM     got_r_num
     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                        , sic_code               AS 'SIC_CODE'
--                        , ...     -- Other columns
SELECT       p.ca_id
,       p.fac_id
,       p.column_name
,       p.txt          AS previous_name
,       a.txt          AS after_modification
FROM       unpivoted_data   p
JOIN       unpivoted_data   a ON p.ca_id     = a.ca_id
                       AND p.fac_id     = a.fac_id
                     AND p.column_name     = a.column_name
                     AND p.r_num      = a.r_num - 1
                     AND p.txt || 'X' != a.txt || 'X'
ORDER BY a.r_num
;To include other columns, add them in the 2 places where I put the comment "Other columns".
Ca_ver_num can have any values, not just 2.00 and 3.00.
This will show cases where a value in one of the columns changed to NULL, or where NULL changed to a value.
There ought to be a way to do this without a separate sub-query like got_r_num. According to the SQL Language manual, you can put expressions in the UPIVOT ... IN list, but when I tried
...     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                             , TO_CHAR (sic_code)     AS 'SIC_CODE'
          )I got the error "ORA_00917: missing comma" right after TO_CHAR. Perhaps someone else can show how to eliminate one of the sub-queries.

Maximum number of rows and columns in data form

Hi,
I wanted to know if there is a limitation to the number of rows and columns that can be displayed in a data form, in Hyperion planning 11.1.2.1 ?
And what would be the most appropriate number of rows and columns to be included for optimum performance.
Thanks.

Hi,
While its a fun fact to determine how much one can stuff into a web form, the reality is: how much can a user reasonably consume in a web form?
And what would be the most appropriate number of rows and columns to be included for optimum performance
You will find that the answer to this is by "what design makes a web form most usable?" And no, the users don't really know what they want from a design perspective, they see it in their head, but usually what they ask for is something that would look entirely different (huge).
The next thing to think about is the use of member selection functions in the page axis. IDescendants(Entity) in a dropdown could cause issues just as easily as too many rows - and again make the drop down unusable for a user.
If your question is a bit more technical, then consider this (somewhat oversimplified): Web forms are constructed by a process on the server. Objects are created based on the form's definition and used by the process that builds the form. The process uses Cartesian looping (lots of iterations) to construct the form cell by cell, starting at the top left and finishing up in the bottom right. If the form has a million cells on it, then the loop and all the code within it runs a million times. The capability of the server has a lot to do with how well it can handle this request, and how many it can handle at one time.
The result of this is gobs of HTML and JavaScript. All of this has to be sent over a network to the requesting client. The client starts receiving the web page code and has to render it in the browser and run the JavaScript. The ability to do this is limited by the browser, the OS, and the hardware that the client is running on.
And that's just rendering the page for use.
Now it has to be interacted with on the client machine, and changes parsed, packaged, and sent back to the server.
So the technical answer is, there can be many limitations to how many rows and columns a data form can have - none of which can truly be anticipated by anyone. This is why I put the part about usability first in this post.
Regards,
Robb Salzmann

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

XL reporter error occurred while executing report! Rows: 25203 Columns: 30

An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

Set maximum matrix row and column size

I hope someone can help me with this. Is there any way to set the row and column size of a matrix control? I have not been able to find a solution. The only way I've been able to set the size is by resetting matrix to its previous state if the user inputs a value outside of the bounds I would like to set. This is done in the 'value changed' event case.
The matrix is large and therefore I cannot increase the size of the control to be the maximum size and then hide the row and column index controls. These have to be displayed.
Any suggestions or help would be greatly appreciated. Thanks in advance.

Here's a quick and dirty way.
Simply hide the index controls and replace them with some fake numeric controls and set the data range accoding to your requirements.
In the attached example (LV8.0), the fake index controls are limited to 0..2, the array size is 5x5 and the displayed array portion is 3x3. Seems to work fine.
(Of course you could add a bit more code to set the limits automatically based on the various sizes.)
You could also make it more fancy and turn the entire thing into an Xcontrol.
Message Edited by altenbach on 06-06-2007 05:32 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LimitArrayControl.vi ‏18 KB

Row and Column detection of a 2D boolean array

I use an array as showed by my example (LB8.2).
Press a 1 or 0 in the array changes it's value and it gives
back the Row and Column (that was changed).
I use this to program a 22 channel patterngenerator (GPIB).
It sends only the column (channel of patterngenerator) patterns, so that makes it faster.
Has someone an idea if this row and column detection can be made simpler (faster)?
Kind regards, Bernard
Attachments:
MyRowColDetection.vi ‏30 KB

Here is a different way
Tim
Johnson Controls
Holland Michigan
Attachments:
MyRowColDetection Rev TLE.vi ‏15 KB

Report Writer Row and Column Format

Hi
Was wondering if there is a possible solution to this :-
Understand that column format is controlled by format groups. This means that all figures in the same column will take the same format (such as scaling and decimal place).
Scenario is ->
                    Colunn #1 -> column set as displaying no decimal point
Rev                  120
OP                      5
OP margin %     4.2 -> how to set this to 1 decimal point. Any formula syntax that I can use?
Regards.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do you freeze a row or column which is not a header in Numbers '09?

Just wondering if anyone has worked out how to freeze a chosen row or column? I know you can do it with header rows, but the row I want to freeze is row 4. I'm using Numbers '09.
And is it right that you cannot link cells between different documents in Numbers, as I used to in Excel?
All help much appreciated!

Using Numbers you cannot reference a cell in another document.
I do not think you can freeze non-header rows. You can make up to 5 rows part of the header:
Then freeze the headers.

Search row and column for return value

Dear Sir/Madam,
                           I have a problem for searching spreadsheet and hope you can help me out a bit. Im pretty new to Labview and Im currently using Labview 8.0. My task is to search the spreadsheet I have attached in row and column-wise, then return the corresponding value out. I had an attempt in doing this as you can see from the vi that i have attached. I try inputting the 'read from measurement file' into an array and using delete, index and search array I will be able to find the index value for the relevant row and column that i searched for by inputting them into an index array with the orginal array from the 'read from measurement file'.
                          So ultimately, when i enter a row value of 0.5 and a column value of 0.3, my output will be 1.688.
                          I can't see any mistakes in my logic but I getting really strange results, like I can read my data has been entered into an array but when i try deleting the first column and put it into another array, the orginal array with nothing deleted is outputted hence making my search to give out -1 value. So could you take a look please and give me any suggestion that can solve my problem or enhance the code a bit. Thank you for your time.
Best Regards,
Coato
P.s for some reason i can't attached the .lvm file of my data hence i have attached the excel version but i think you need to convert it back to .lvm for the 'read from measurement file' function to work.
Attachments:
Backswing compensation.csv ‏10 KB
Backswing comnpensation2.vi ‏109 KB

Your VI makes absolutely no sense to me, but maybe I don't understand what you are trying to do.
You seem to have dynamic data with 6 signals and 48 points/channel. Now you reshape this into an array of dynamic data with 4x13 elements from which you slice out one row or column, resp. "delete from array" is NOT the correct tool to do this, use "Index array" with one index unwired to get a row or column as 1D array.
So you end up with two 1D arrays of dynamic data that you search for DBL. It is difficult to understand how you want to search for an array element that corresponds to a scalar DBL value of 0.1. Your array elements are NOT DBLs but dynamic data, each containing many signals!
There are two elements on all your data that are "3", the rest are zero. You will never find anything that is 0.1.
Maybe you can convert your original dynamic data to a 2D array with "rows are signals" using "convert from dynamic data", then operate on the 2D array.
Coato wrote:
                          So ultimately, when i enter a row value of 0.5 and a column value of 0.3, my output will be 1.688.
Sorry, Please explain.
Please make a VI containing a simple 2D aray as diagram constant that contains e.g. 5x5 typical values. Let us know what kind of result you expect from your algorithm..
LabVIEW Champion . Do more with less code and in less time .

Help! Inserting a 1-D comment array into a 2-D string array at specified row AND column

Hello everyone,
I am writing a 2-D string array to excel and i need a way to add comments to my file like this:
SLAM NAME G Level Comments
1 RALF 26
1 RALF 26
1 RALF 26
1 RALF 26
For some reason, i cannot specify a row AND column to write because:
When i use replace array subset it only replaces 1 element at my index.
When i use replace array subset with a loop, it creates empty spaces until it reaches the end of the array it is replacing.
When i use Insert into array: i cannot wire 2 inputs for row and column.
In my complete VI i will need to write from row 1-1001, a different comment from 2-2002, a different comment from 3-3003, etc until a stop condition is met so i need to figure out how to do this programatically and not have it replace any elements outside of the range or it will override previous commetns.
I am at a loss of what to do. Any and all suggestions are greatly appreciated.
Thanks!
Solved!
Go to Solution.
Attachments:
array.vi ‏13 KB

Hi proph,
I made a small subtile change to yur VI and now it replaces all values of the 4th column…
THINK DATAFLOW!
Use shift registers when you need to propagate values from one loop iteration to the next!
USE/LEARN DEBUGGING TECHNIQUES!
There are tools like probes and highlight to understand your VI execution and to find problems…
Go through all those free online courses offered by NI!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
array.vit ‏12 KB

Hyperion Reports - Row and Column templates

Sorry if this may be a bit basic but we are new to Hyperionreports. Currently we are going through a redesign process and washoping to get some viewpoints on the benefits of using row andcolumn templates within reports. I am looking at this option butgetting frustrated by the limitations around formatting, etc Are there any views out there on the preferred options. We havea particular style in design we need to include which is becomingdifficult when we use row and column templates

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Sumproduct row and column?

hello --
it seems fairly straight forward to use sumproduct for two columns or two rows of a given length. how can i do the same for a row and a column of the same length. i keep getting an error when i do that. do i need to use a different function to get the desired result? basically what i am trying to do it:
sumproduct((A1:A5),(C1:C5))
thank you in advance for your help.

The arguments to the sumproduct() function require the same dimensions. I think this mean the same number of rows and columns. Therefore a range from A1 to A5 is 5 rows , 1 column, whereas a range from C1 thru C5 is 1 row and 5 columns.
I suggestion something like this to make the range in the C1 thru C5 reside in B1 thru B5:
Now you can perform the sum product on column A and B.
B1=OFFSET($C$1, 0, ROW()−1)
this is shorthand for select cell B1, then type (or copy and paste from here) the formula:
=OFFSET($C$1, 0, ROW()−1)
select cell B1, copy,
select cells B1 thru B5, paste
For this example:
D3=SUMPRODUCT(A, B)

ROW TO COLUMN - LI'L BIT DIFFERENT

Similar Messages

Maybe you are looking for