Run and Exit button on application

Hello,friends! I have some problem and I'll be thanked for any help! I want to create application from my VI with application builder. I want to take away all standard toolbars and buttons when application will be using. So,to do it I must to create Run and Exit buttons in application. But i do not know how to do it :-( It will be cool, if anyone will divide by example of VI, which will contain function for this buttons! Thanks!
Solved!
Go to Solution.

here is a vi attached..just an example 9hittimg stop button will quit Labview)
If you do not want to see the menu bar or the scroll bar then CTRL+I->VI properties->Window appearence->customize and select from the option to customize accordingly.
Also if you want to stop and quit the application use the "Quit LabVIEW" function available
Regards
Guru (CLA)
Attachments:
RunStop.vi ‏12 KB

Similar Messages

Cancel and Exit button not working

Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby Jacob

Hi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
   MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
   MODULE EXIT_SCREEN INPUT.
       CASE OK_CODE.
      WHEN 'EXIT' .
            LEAVE TO SCREEN 0.
      WHEN 'CANCEL'.
      ENDCASE.
   ENDMODULE.
This will surely work.
<b>reward if Helpful.</b>

Problem activating the back and exit button with the ALV using OO

I have wrote my first alv using Methods.My problem is that i can't activete the BACK and EXIT button in the standart toolbar .
Look my code please .....
Without PF-STATUS can i do it ?
*& Report YDP_DOUBLE_ALV
REPORT YDP_DOUBLE_ALV.
TABLES : YQM_CERT , MARA , YOUTPUT_APPL.
DATA : ALV_GRID TYPE REF TO CL_GUI_ALV_GRID,
       CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       FIELD_CAT TYPE LVC_T_FCAT,
       LAYOUT TYPE LVC_S_LAYO.
DATA : ALV_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
       CUSTOM_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*       FIELD_CAT TYPE LVC_T_FCAT,
*       LAYOUT TYPE LVC_S_LAYO.
DATA: DYNNR TYPE SY-DYNNR,
      REPID TYPE SY-REPID.
DATA: OK_CODE TYPE SY-UCOMM.
DATA : BEGIN OF ITAB OCCURS 0.
        INCLUDE STRUCTURE YQM_CERT.
DATA   END OF ITAB.
DATA : BEGIN OF ITAB1 OCCURS 0.
        INCLUDE STRUCTURE YOUTPUT_APPL.
DATA   END OF ITAB1.
* MODULE DISPLAY_ALV OUTPUT
MODULE DISPLAY_ALV OUTPUT.
SET PF-STATUS 'ZST9'.
PERFORM DISPLAY_ALV.
ENDMODULE.                    "DISPLAY_ALV OUTPUT
                   "DISPLAY_ALV OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
START-OF-SELECTION.
LAYOUT-ZEBRA = 'X'.
LAYOUT-GRID_TITLE = 'YQM_CERT'.
LAYOUT-CWIDTH_OPT = 'X'.
LAYOUT-SMALLTITLE = 'X'.
SELECT * FROM YQM_CERT INTO ITAB.
    APPEND ITAB.
ENDSELECT.
SELECT * FROM YOUTPUT_APPL INTO ITAB1.
    APPEND ITAB1.
ENDSELECT.
CALL SCREEN 100.
END-OF-SELECTION.
*&      Form DISPLAY_ALV
*       text
FORM DISPLAY_ALV.
IF ALV_GRID IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER
      EXPORTING
*      PARENT                      =
        CONTAINER_NAME              = 'CC_ALV'
*       style                        =
*      LIFETIME                    = lifetime_default
      REPID                       = REPID
      DYNNR                       = DYNNR
*      NO_AUTODEF_PROGID_DYNNR     =
*    EXCEPTIONS
*      CNTL_ERROR                  = 1
*      CNTL_SYSTEM_ERROR           = 2
*      CREATE_ERROR                = 3
*      LIFETIME_ERROR              = 4
*      LIFETIME_DYNPRO_DYNPRO_LINK = 5
*      others                      = 6
    IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT ALV_GRID
      EXPORTING
*    I_SHELLSTYLE      = 0
*    I_LIFETIME        =
        I_PARENT          = CUSTOM_CONTAINER
*    I_APPL_EVENTS     = space
*    I_PARENTDBG       =
*    I_APPLOGPARENT    =
*    I_GRAPHICSPARENT =
*    I_NAME            =
*    I_FCAT_COMPLETE   = SPACE
* EXCEPTIONS
*    ERROR_CNTL_CREATE = 1
*    ERROR_CNTL_INIT   = 2
*    ERROR_CNTL_LINK   = 3
*    ERROR_DP_CREATE   = 4
*    others            = 5
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
*      I_BUFFER_ACTIVE               =
*      I_BYPASSING_BUFFER            =
*      I_CONSISTENCY_CHECK           =
         I_STRUCTURE_NAME              = 'YQM_CERT'
*      IS_VARIANT                    =
*      I_SAVE                        =
*      I_DEFAULT                     = 'X'
       IS_LAYOUT                     = LAYOUT
*      IS_PRINT                      =
*      IT_SPECIAL_GROUPS             =
*      IT_TOOLBAR_EXCLUDING          =
*      IT_HYPERLINK                  =
*      IT_ALV_GRAPHICS               =
*      IT_EXCEPT_QINFO               =
*      IR_SALV_ADAPTER               =
      CHANGING
        IT_OUTTAB                     = ITAB[]
*      IT_FIELDCATALOG               =
*      IT_SORT                       =
*      IT_FILTER                     =
*    EXCEPTIONS
*      INVALID_PARAMETER_COMBINATION = 1
*      PROGRAM_ERROR                 = 2
*      TOO_MANY_LINES                = 3
*      others                        = 4
    IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
    CALL METHOD ALV_GRID->REFRESH_TABLE_DISPLAY
*       EXPORTING
*         IS_STABLE      =
*         I_SOFT_REFRESH =
*       EXCEPTIONS
*         FINISHED       = 1
*         others         = 2
    IF SY-SUBRC <> 0.
*      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDFORM.                    "DISPLAY_ALV

Hi
U need to active them in your status ZST9.
Max

Minimize, Maximize, and Exit Buttons are Missing

I can not view the minimize, maximize, and exit buttons unless I enter full-screen viewing. I have all add-ons turned off.

You may not see those buttons clearly if they get hidden by the transparency on Windows 7.
Right click in a free space on your desktop.<br />
Left click on Personalization.<br />
There are four options in Windows 7 at the bottom of the screen, choose "Window Color and Appearance".<br />
Select a border color<br />
Uncheck: "Enable transparency"<br />
*[[/questions/804050]]

How can i remove Go and Exit buttons as well as Advanced text from OVS help

Hi Gurus,
Once i have impleted OVS code in my webdynpro, i am able to see Go and Exit buttons as well as Advanced Search Text, but i do not want see buttons and Text in my screen, How can i remove the same?
Thanks
Venkat.

Hi Venkat,
Create a context attribute say Va_Attr1 in the parent view, popup view and component controller. Map both the context in 2views to the component controller. So, the context variable which is bound to input field is passed via component controller to popup view and is stored in there as context attribute.
Now, you can just get the context attribute value set in the input field in parent view and use it for search in popup view.
In order, to have tables with multi-selection. Goto table properties and in selectionMode, set multiNoLead instead of auto.
Then in the wdDoInit() of popup view put,
wdContext.node<Table>().setLeadSelection(-1);
Loop through the table node and find out at what all index rows are selected for table using
int count=0;
String s = "";
for(int i1=0; i1<wdContext.node<Table>().size();i++){
   if(wdContext.node<Table>().isMultiSelected(i1)==true){
    count = count+ 1;
    s=s+ i1;
count will give you no. of rows selected which would be equal to s.length.
s.CharAt(0) will give the first row selected and similarly
s.CharAt(n) will give the nth row selected
Using Integer.parseInt(s.CharAt(n)) will give you back the index int type where s.length will give No. of rows selected.
For rows which are selected append the text values of all those separated by ";" using
StringBuffer strBf = new StringBuffer();
for(int i=0; i< <No. of rows selected>; i++){
if(i=0){
strBf.append(wdContext.node<Table>().get<Table>ElementAt(Integer.parseInt(s.CharAt(i))).get<Text>());
}else{
strBf.append(";" + wdContext.node<Table>().get<Table>ElementAt(Integer.parseInt(s.CharAt(i))).get<Text>());
Finally when 1 or more row is selected and needs to be populated in the input field then set in the context attribute which will pass the value through context mapping using
wdContext.currentContextElement().setVa_Attr(strBf.toString);
Regards,
Tushar Sinha

Is it possible to create run and stop button on the control pannel instead fo using the ones on the tool bar?

I have created a program which runs to all my specifications. The final thing I'd like to do is to be able to run it from the contrl panel.
Can i create a run and stop button on the control panel or am i limited to using the little white arrow button on the toolbar?

When you say Control Panel are you referring to the Front Panel of your VI? If so then yes you can have the program start automatically upon being opened and close with a button push on the Front Panel. Let me know if this is what you were looking for.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Audio stops working until I run and exit pacmd.

When I am using Banshee, I can play a song and there will be no audio until I open a terminal, run pacmd and exit it. The audio starts working after that until I try to select a different song. If the application goes to the next song no it's own there is no problem. I have tried removing the banshee-1 folder in case it was an issue with banshee.
This is a new problem. I used pulseaudio for over a month without any issue. All of the sudden it just stopped working, I have no idea what action caused it so I don't even know where to start.
I am totally lost. I don't even know what config files to post or anything. Please let me know what you need.

Moonracer wrote:
this fixable or should I go to Apple so they can deal with it?
You have to take the computer to the Apple store and let them deal with this problem.
Best.

Help and Exit button appears after upgradation from External ITS to Integra

Hi All,
Though there some threads with similar problem but still I am not able to fix the problem.
After we upgraded from external ITS to Intergrated ITS some of the application started displaying "Exit" and "Help" buttons. Please note that most of the application are working fine though.
Kindly suggest.

Hi Edgar,
Thanks for the reply. Do I need to maintain this parameter from SE80 or from SICF? I had read in SE80 but it not help. I do not have authorization in SICF.
If it is to be done from SICF , please let me know.
Warm regards,
Aditya

Create Run And Stop Buttons on Front Panel, rather than using the toolbar run/stop

I would like to make my vi more user friendly by creating start and stop buttons on the front panel. I havent found much info on how to create them. I have created a boolean stop button to stop my FOR LOOP.
-Chris

Creating the buttons is easy - just select the style you want from the Boolean palette. What you need to do is change your diagram and the VI properties. To have a VI automatically start running when opened, open VI Properties by selecting that under the File menu or right clicking the VI's icon. Select Execution and check the Run when opened box. If you need the user to enter some data or change parameters before running the program, there's a couple of ways to go about it with a front panel Start button. You could have a separate while loop with just the start button in it and connect an output of that to a main while loop. This creates data flow and ensures that the start while loop executes before the main. You could create a simple state machine. T
here's a couple of shipping examples. Just open the Example Finder and enter state for the keyword. You could also use the Event structure. Again, there are several shipping examples. Instead of doing a search, you could also browse the Example Finder and look at what's underneath the Building User Interfaces topic.
p.s. I don't think you created a stop button for a for loop as there is no way to stop a for loop. What you can stop is a while loop.

Adobe form: Issue with BACK, CANCEL and EXIT buttons

I am new to Adobe forms. I created a simple demo Adobe form and was able to print it successfully except a strange problem.
Whenever I opt for print preview it shows me a blank page. On pressing enter it shows me the form, But now none of the BACK, EXIT, CANCEL buttons work. On pressing any of them I keep getting the print form.
So the only way I can come out of it is /n.
Can anyone please help with the reason for such an issue and how to get rid of it.
Regards,
Ashutosh

Maybe you can tell us something more about the code you use to print your form. I think thatis the problem. Otto

How can I Hide/ Disable the Question mark and Exit button in the Top right corner of Link Bar of Excel Documents in SharePoint 2013?

Hi,
How can we Hide / Disable the Help(?) and Close(x) buttons which are located in the right corner of the Top Link Bar in the Sharepoint Document Library pages as well as Excel Web Access?
Our requirement is : When we try to view the Excel Services Report from another web site, Help(?) and Close(x) icons are also appearing in the Excel Web Access Web Part, but we don't want to display them in our site.
Please let us know the solution for this case.
Thanks in advance.
Regards,
Sanjana

Hi,
In the xlviewer.aspx, we can find the two buttons like this:
To hide them, you need to add the CSS into the xlviewer.aspx which stays in:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Save and Exit button

Hi
I want to make a button that commits changes made on the page the button is on and then navigates away to another page.
I have tried to set an action on the button matching an action on a page flow. In Internet Explorer it seems to work. The change is commited and I get navigated back to the page I want to get navigated to but I get a warning every time saying: "To display the webpage again, Internet Explorer needs to resend the information you´ve previously submitted.
If you were making a purchase, you should click Cancel to avoid dublicate transaction. Otherwise, click Retry to display the webpage again."
In firefox the part of the page containing the Commit button doesn´t get shown.
I am not a java guru so I hoped I could do this without a backing bean. Is it possible to do this without a backing bean?
If someone could tell me how to do this or give me a link to some example I would be grateful.
Regards
Atlantic Viking

Hi,
not sure what is going on there but it seems that the page is served from the browser cache than refreshed from the server. Since you don't mention the release of JDeveloper I assume 10.1.3. If you set "redirect" on the navigation flow, does it happen the same ? In the visual editor, select the navigation case and edit its properties to set the redirect
Frank

When I have a 2nd Firefox window open, my bookmark toolbar is empty, as well as there is an additonal bar above where the exit and minimize buttons are. There is also a black bar where the minimize and exit button are.

[http://i.imgur.com/FirpS.jpg Picture of the problem]

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted toolbars
-> go to View Menu -> Sidebar -> select '''Bookmarks'''
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use custom settings for history"''' -> REMOVE Checkmark from "'''Permanent Private Browsing mode'''" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

How to integrate Oracle Right Now with our application Calling Button and Chat Button Application is on WebCenter Sites

How to integrate Oracle Right Now with our application Calling Button and Chat Button. Application is on WebCenter Sites

Thanks handar. As per your instructions I have tried OAM authorization policy and its working fine. But we also wants to check the same with OES also. Currently I have configure weblogic SM and created domain. In same domain I have deployed my application also. I have created application, resources and authorization policy to authorize /myfolder/index.jsp if user has some specific role. Now if I try to access my web application using http://host:8001/CONTEXT/myfolder/index.jsp, it doesn't check if user is authorized or not. I guess my application is not related to the resource I have created. Please help me with this. Also, let me know if we can retirive logged in user from session and use for authorization.

When i open a mozilla page it appears blurry. The mozilla, tools (etc...) options won't appear, just the minimize, maximize and close buttons

i have on my pc windows 7 and yesterday i tried to open a mozilla page but it appeared blurry. on the page, the mozilla, tools (etc..)buttons dont even exist only the minimise, maximise and exit buttons. I unistalled it and reinstalled, restarted the pc it but i had the same problem. i checked with my firewall settings and it still didn't work. i also downloaded google chrome and it has the same problem but IE works just fine.

hello foodel, [https://support.mozilla.org/en-US/questions/940393#answer-377118 from another user] we found out that this might be related to malware active on your pc. please close all firefox windows and try [[Troubleshoot Firefox issues using Safe Mode|running firefox in safemode]] (by pressing the shift key while you're starting it). in firefox safemode go to firefox > addons > extensions and remove the entry named "Codec v1.0" or any other addons that look suspicious & you have not installed intentionally. afterwards see if you can run firefox normally again...
please also do an in-depth scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & keep firefox and your plugins up-to-date in order to stay safe on the web.
[[Troubleshoot Firefox issues caused by malware]]
[[Update Firefox to the latest version]]
https://www.mozilla.org/plugincheck/

Run and Exit button on application

Similar Messages

Maybe you are looking for