Run Time Error - You attempted to access an unassigned field s
Dear All
I created a report to display purchase order history. there is no syntax error.but runtime which i have pasted below.
help me to find the error.
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 26.02.2008 06:25:56
Short text
Field symbol has not yet been assigned.
Error analysis
You attempted to access an unassigned field s
(data segment 32820).
This error may occur if
- You address a typed field symbol before it
ASSIGN
- You address a field symbol that pointed to
internal table that was deleted
- You address a field symbol that was previou
UNASSIGN or that pointed to a local field t
longer exists
- You address a global function interface, al
respective function module is not active -
not in the list of active calls. The list o
can be taken from this short dump.
Trigger Location of Runtime Error
Program SAPLSLVC
Include LSLVCF36
Row 3.176
Module type (FORM)
Module Name FILL_DATA_TABLE
Source Code Extract
Line SourceCde
3146 alv_style_align_center_top.
3147 endif.
3148
3149 append ls_lvc_data to ct_lvc_data.
3150 endif.
3151
3152 ************************************
3153 * Column per Fieldcat Entry
3154 ************************************
3155 loop at it_fcat_local assigning <ls_fcat>.
3156 clear: ls_lvc_data-href_hndl,
3157 ls_lvc_data-drdn_hndl,
3157 ls_lvc_data-drdn_hndl,
3158 ls_lvc_data-style,
3159 ls_lvc_data-style2,
3160 ls_lvc_data-style3,
3161 ls_lvc_data-style4,
3162 ls_lvc_data-maxlen.
3163
3164 clear: lt_color_lvc, lt_color_slis.
3165
3166 add 1 to ls_lvc_data-col_pos.
3167
3168 if not <ls_fcat>-indx_field is initial.
3169 assign component <ls_fcat>-indx_field
3170 of structure <ls_data> to <l_field_value>.
3171 else.
3172 assign component <ls_fcat>-fieldname
3173 of structure <ls_data> to <l_field_value>.
3174 endif.
3175
>>>> macro_cell_data_get
3177 <ls_fcat>
3178 <ls_data>
3179 <l_field_value>
3180 ls_lvc_data-value.
3181
3182 *>>> new API
3183 if ir_salv_adapter is bound.
3184 clear ls_lvc_data-style.
3185
3186 * color
3187 if g_gui_type ne 1.
3188 if <ls_fcat>-key eq abap_true.
3189 ls_lvc_data-style = alv_style_color_int_key.
3190 elseif l_style_color is initial
3191 and ( <ls_fcat>-emphasize is initial or
3192 <ls_fcat>-emphasize = '$' ).
3193 if <ls_stin>-counter is initial.
3194 ls_lvc_data-style = alv_style_color_normal.
3195 else.
Hi
You are getting the dump because you have not populated the field catalog properly. There will be some mistake in the structure which you are using. Kindly check the same.
THanks
Vijay
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 12:41 PM
Similar Messages
-
When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End FunctionI think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Run Time Error when attempting to use pse 10 editor
While using the editor in PSE 10, it suddenly stopped working, giving me a "run time error" message. I have created a new user account, created restore points on my PC, attempted to change the preference files, all to no avail. The software came installed on my PC, so I'm unable to do an uninstall and reinstall as I don't have the installation CD. The PC manufacturer and Adobe support have been unable to help (neither providing me with a product key). Can someone help me fix the "run time error"? Until it's fixed, the product is unusable.
Can you share the exact error message or probably a screenshot which might help us reviewing it and suggest you any solution.
Thanks,
Garry -
Run time error in CJ20N: while accessing a WBS
Dear Experts,
I took a random WBS from PRPS table:(kindly see the screen shot of WBS id)
I executed Cj20N for this WBS and I got the following run time error:
The log in ABAP error says "Not all objects were locked (See lock log)" .
Can someone help in in realizing root cause of this error.
Thanks & Regards
SaurabhHi Maria,
Is this happening always or just a single time ?
For this individual WBS: YES
Do you archive projects / WBS elements ?
NO
I would like to add that when I access this WBS with CJ02 I got following:
Error when accessing file: Select PROJ, WBSNR = 00000088
Message no. CJ898
For this, I read SAP Note 377174 which says :
.......The not imported WBS elements retain but can no longer be edited. When you try to call them up, the system generates message
CJ898 'Error when accessing file: Select PROJ, PSPNR =
<<<internal number of the deleted project>>>".
1. Implement the attached advance correction
2. Change GUI status SAPLCJWB PDMV as follows:
Call up the Menu Painter (Transaction SE41).
Enter: Program SAPLCJWB, status PDMV; select subobject Status and press Change.
In the menu bar, expand submenu Edit -> Object.
Position the cursor on menu option PICK Choose and deactivate it with Extras -> Function active <-> inactive (F7).
Activate the changed GUI status.
I believe, If I follow this path it will resolve this error But can you please help me in understanding this logic. I am not getting step 4 and 5 of it. Why is it dependent on GUI?
Thanks & Regards
Saurabh -
Package failed with run time error: " GETWA_NOT_ASSIGNED".
Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32774).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Regards, TrineHi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António -
Hi,
I am doing post goods issue in delivery document but getting run time error.can anybody help me to solve this issue,
Error:
Runtime Errors:GETWA_NOT_ASSIGNED
Short text:Field symbol has not yet been assigned.
What happened?Error in the ABAP Application Program
The current ABAP program "SAPLSLVC" had to be terminated because
it has come across a statement that unfortunately cannot be
executed.
What can you do?Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can
look at and manage termination messages, and you can also keep them for a
long time.
* Error analysis*
You attempted to access an unassigned field symbol
(data segment 32807).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLSLVC" or "LSLVCF05"
"DATA_TABLE_GET"
Regards,
pavan.Hi Pavan,
Have you checked these notes
1247170 Short dump during execution of Data Entry Layout
496626 ALV: Runtime error: ASSIGN_TYPE_CONFLICT
1022388 Short Dump switch to Counter tab in change mode
993282 Short dump GETWA_NOT_ASSIGNED in Switch BC Set recording
490020 GETWA_NOT_ASSIGNED for catalog selection
Regards -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
I get aq run time error when trying to load the latest version of iTunes. Help.
I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?
Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Run time error while creating sales order
hi all,
im working on ECC 4.7. normally when i create a sales order (VA01) and use incompletion log, it shows no errors. but when i start to save the same order . it shows a RUN TIME ERROR of ABAP . so plz help me to solve out this error
thanks\Hi Tarun,
When you get a run time error, you can see the error analysis on the left hand side. Check what the analysis is saying and you may need an ABAPer to find out the exact reason for the dump. I am just guessing it could be due to number range.. just a guess.
Regards,
Raghav -
Run-time error '7': Out of memory - Cisco Clean Access problem
Hi all,
I hope this question is in the appropriate place. I'm trying to use my company's vpn service. Here's how the process should work:
1) Log on with username/password using Cisco AnyConnect VPN Client
2) Log-in to the portal. During this step the Cisco Clean Access Agent is supposed to automatically log-in. However I get the following error:
Run-time error '7':
Out of memory
My company's network services didn't seem to be much of a help so I was hoping one of you would have a good suggestion(s).
Please keep in mind that I'm not great with computers. I know how to use them and all that but I'm not familiar with the inner-workings at all (registry editing etc.)
Thanks in advance!
-BillI should add that the version of CCA is 4.1.10
-
TS3212 "Run time Error R6025" when I try to access tunes?
I have had ITunes for some time and have moved to a new computer. It performed sucessfully but now I am getting "Run time Error R6025" when I try to access tunes?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
When access BW from Crystal I get: run-time error '-2147417848(80010108)'
Installed Crystal and the SAP int Kit in the correct order. I can access R/3 but get an error when trying to access BW:
run-time error '-2147417848(80010108)'
Then Crystal crashes and shuts down.Yep, I have the same... The only one solution for me for now is open report, then log in to BW using toolbar icon from SAP integration kit bar. Only after that you can work with this report without crash.
-
I just downloaded the new itunes so I can sync music to my iphone 5 and when I go to open the new itunes, a message pops up that says "Run time Error, an application has made an attempt to upload this file incorrectly"?
Hello there, tmiller25.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Run time Error in accessing Analyzer on VIsa 64 bit, Office 2007 and SAP GU
Hello experts-
I can not run Bex Analyzer using WINDOWS VISTA HOME PREMIUM 64 bit OS, Office 2007 and SAP GUI 7.10
I am receiving Run time error "5" and does not let me open or create a new query. Please share your experience and thoughts so that I could be able to fix this issue
ThanksHi Suresh,
Check the RFC connection of Source system. It seems that your rfc connection is not working properly. So make sure that you are able to establisthed the connection between these 2 systems.
Regards
Subhash -
I recently allowed an iTune update to be downloaded to my PC. SInce then I'm getting a Run time Error "R6034 An application has made an attempt to load the C runtime library incorrectly." Then I cannot run iTunes. I tried "fixing" it, "Un-installing and re-installing iTunes. Still getting the same message and not able to run iTunes.
Follow the directions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin
Maybe you are looking for
-
How to use reuse_alv_variant functions
helo experts can any one tell me how to use these function modules REUSE_ALV_VARIANT_DEFAULT_GET, REUSE_ALV_VARIANT_F4, REUSE_ALV_VARIANT_EXISTENCE, WHAT IS THE CS_VARIANTS PARAMETER IN THESE FUNCTION MDOULES. HOW TO USE THAT?
-
Question for structuring an application
Are there any Best Practice Guides for structuring applications in WDP4J?( like separation of model in own DC etc...) Best regards, Thomas
-
Data transfer from EBP to external systems
Hello everyone....am in a tizzy regarding BAPI's and IDOC's.Can someone clear my doubts please?? Interface concept of R/3 is based on two strategies--RFC and IDocs. 1.]When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred
-
How do I create a group email list on my Blackberry Tablet? Iggy
-
How to create UNIT info catalog
Anyone has the steps to create InfoObject catalog for info object type UNIT ?