Runing Forms 9i from Forms Buider

Hello Everybody,
I have just installed 9i DB and Dev. Suite. I have built and compiled a form.
When I try to run it, I get an error message - The HTTP LISTENER IS NOT RUNNING ON PORT 8888. CHECK YOUR RUNTIME PREFERENCES. I am new to 9i and don't know to do.
Could someone please help me out.
Many thanks.
Emmanuel.

start the forms OC4J instance:
start->programs->oracle 9i developer suite->forms developer->start oc4j instance

Similar Messages

Re:Runing Forms 9i from Forms Buider

When running a form from Forms Builder, it brings up browser, loads Jinitiator and then hangs.
Any suggestions?
weh

Try to set the Java console on in the Jinitator control panel.
This will allow you to see at what stage you get stuck.

Passing parementer frron forms to menu in oracle 6i form buider

hello guys,
i have to pass parameters from oracle 6i forms to the menus form.
pl tell me how to do this?
thanks & regards
Vishal Agrawal

965354 wrote:
i have set menus.mmx fath to menu module property of the calling form.
my problem is that i have to populate a list box of called form according to the value supplied by calling form.Declare global variable at calling form and use it in called form to populate list box.
but form is called through menus.There is no issue with the menus.
so first i need to pass that value to the menu .mmx and then menu.mmx will pass that value to calling forms.
so please let me know how can i pass a value from form.fmx to menu.mmx.A global variable is available through out the user session. So it's not any other issue to use in within that session. In same session you can use it where you want.
Hope it's clear to you.
Hamid
If someone's response is helpful or correct, please mark it accordingly.*

Sequence Number Generation in XML Form Buider??????

Hi All,
I want to generate some Sequence Number for each XML Form Generated by the XML Form Builder Application?
Ex: my XML Form Builder Application is "MYAPP". Using this I filled data and Save, then an XML will be created, then it should have some unique Number(say 1234), then if I fill the differennt Data and Save, then another XML will be created. For this the Number should be 1235, next 1236, ........
I can use the XML Form ID, but that is not User friendly format. Becaz I need to display this Number to the End User.
(Example: 10b2ae7b-e269-2b10-d88e-ddade2e62015.xml)
If anybody have idea on this, Please guide me...
Thanks&Regards||
Ashok M.
Edited by: Ashok Kumar Munugoti on Oct 16, 2008 8:04 AM

closing this Thread.

Looking for a complete tutorial for Oracle forms buider 10g

Hello,
i'm a new oracle developer, actually i'm working on new project and i have to use the Oracle products. So, if someone has a complete tutorial for forms builder 10g,tell me where i can find it or send to me. thank you.

Hope you will find what you are looking for here.
http://www.oracle.com/technology/sample_code/products/forms/index.html

Error while runing form

Hi All,
Could someone help me in solving my problem while running my form
I have installed Forms [32 Bit] Version 10.1.2.0.2 (Production) and Installed JInitiator 1.3.1.22.
I have configured FORMS_PATH at default.env file. I am using Databse 10.2 and started my OC4j instance
When I execute the form it display error in my Internet Explorer
Internet Explorer has encountered a problem and needs to close.
rgds
saaz

http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_22467309.html
Especially please read this:
http://technology.amis.nl/blog/?p=1445
There might be several reasons the crash occurs.
You may have unwanted add-ons like Microsoft Live Toolbar running on your machine. Disable the add-ons one by one, restart IE and check if the error is resolved
IE 7 might not be supported for your JRE environment. Uninstall IE 7 and continue using IE 6 until the JRE version is supported. Further more to prevent that IE 7 will be pushed again on your computer install the blocker toolkit of Microsoft. The blocker toolkit that may be installed by administrators can prevent the automatic delivery of IE 7 to the users desktops. Although the application of the blocker software prevents the automatic download of IE 7, it does not stop users manually downloading and installing it themselves.
Oracle advises:
"If your Microsoft Automatic Updates facility is set to Automatically download recommended updates for my computer and install them, we highly recommended you install the blocker toolkit. If your Microsoft Automatic Updates facility is set to Download updates for me, but let me choose when to install them, it may still be useful to install the blocker toolkit as an extra safety measure.
Companies that have their own Windows patch update server (e.g. Windows Server Update Services (WSUS) or SMS 2003) do not need this blocker. They should just manage the IE 7 update so that it is not deployed until certification of IE 7 has been announced by Oracle. "
You can download the install blocker at http://www.microsoft.com/downloads/details.aspx?FamilyId=4516A6F7-5D44-482B-9DBD-869B4A90159C&displaylang=en

Error while runing a executable from JAVA

Hi,
I am trying to run a exe file from Java...I am geting the following exception
java.io.IOException: CreateProcess: BOP.exe -e GT13E2M_E32_G21 error=2
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at afops.appActions.simulation.run.BOPSolver.runBOP(BOPSolver.java:37)
     at afops.actions.SimulationStartAction.startRunForBasicBDDNormalCalc(SimulationStartAction.java:227)
     at afops.actions.SimulationStartAction.actionPerformed(SimulationStartAction.java:105)
     at afops.components.MyToolbar$EventRedirector.actionPerformed(MyToolbar.java:198)
Following the piece of code
String workingDir = BenchConstants.workDir
                              + BenchConstants.separator
                              + ownedFrom.getDataBlock().getGTdir();
                    String command =    "BOP.exe -e "+ownedFrom.getDataBlock().getGTdir().trim();
                    //String command = workingDir + BenchConstants.separator
                    //          + "BOP.exe -e " +workingDir + BenchConstants.separator +ownedFrom.getDataBlock().getGTdir();
                    File dir = new File(workingDir);
                    Runtime rt = Runtime.getRuntime();
                    String line;
                    String errLine;
                    System.out.println("Run Command string is : "+command);
                    Process pr = rt.exec(command,null,dir);Here File object dir points to the Dir where the exe file is located and where the command to be run.....
Thanks & regards
Karthik

'dir' only represents the working directory of the process, it has no bearing on where the executable is looked for. So if the executable isn't on your PATH (or one or two other well-known places) it won't get found.
To do what you want, you need to specify a full path to the exe - in this case converting 'dir' to a string and pre-pending it to the exe name should do the trick.

Runing java pogram from Servlet

Hi everbody
I was trying to execute and run a java program from servlet. It seems to me the servlet can compile the code but it is not capable to execute it. I have tried to save the class file in a bat file after the servlet compiled it but it did not work. any help will be appreciated.
try{
String[] command = {"javac","c:\\class\\test.java"};
Runtime rt = Runtime.getRuntime();
Process p = rt.exec(command);
catch(Exception ex){ }
try{
String[] command = {"java","c:\\class\\test"};
Runtime rt = Runtime.getRuntime();
Process p = rt.exec(command);
catch(Exception ex){ }

Don't cross-post your questions, please.

Runing VBAI Inspection from LabVIEW

Hello,
I found an example named "VBAI from LabVIEW example" (for LabVIEW 2011) that allow to launch VBAI inspection from a LabVIEW application and then get the inspection's results.
The problem that i can't run this example because it used a special library for interaction with VBAI end there is no documentation about this library.
I would like to know who to import inspection name or reference to be executed.
Thank you
Solved!
Go to Solution.
Attachments:
VBAI from LabVIEW example.vi ‏51 KB

I found the solution at the example under VBAI 2011/API examples/LabVIEW examples folder.
Thank you everyone

Runing an exec from class Runtime and redirecting its output ...?..?

Hello!
I am trying to run a C exec by using th eRuntime class.
This works well ...
But, I want to redirect its output to my transcript.
This also works with small output (some lines !) ...
But the out put is up to 3000 lines, my program does
not continue. It is suspended in a waiting state.
I suspected that the buffer is filled, but there is still some lines to be written ...?
Anyone knows this problem and the solution ..?
Thanks by advance
Yaz

You could try something like thisjava.util.List al = new ArrayList();
try {
     Process p = Runtime.getRuntime().exec("cmd.exe /c dir");
     BufferedReader br = new BufferedReader(new InputStreamReader(p.getInputStream()));
     String s = "";
     while ((s=br.readLine()) != null) {
          al.add(s);
     ListIterator li = al.listIterator();
     while (li.hasNext()) {
          System.out.println(li.next());
catch (IOException ioe) {}Mark

Calling a report from Form 6i

Hi,
I want to call a report from Form 6i at run time. And I write the following code in When Buttton Press trigger . when I press the button it will gives no response.
declare
     x report_object;
     y varchar2(100);
begin
     x:=find_report_object('billform');
     y:=run_report_object(x);
end;
for more information , path of my report is: C:\REP\billform.rdf
please send me the solution of this problem
E_mail: [email protected]
Shahzad

hi,
now i am using the following code in when button press trigger. if u give me ur e_mail address i will send u FMB and RDF files used for Scott/tiger EMP table for the sample.
declare
repo_Para     ParamList;
BEGIN
repo_Para:=Get_Parameter_List('Report_para');
IF not Id_null(repo_Para) THEN
     destroy_parameter_list(repo_para);
end if;
repo_Para:=Create_Parameter_List('Report_para');
Add_Parameter(Repo_para,'PARAMFORM',TEXT_PARAMETER,'No');
Add_Parameter(Repo_para,'MAXIMIZE',TEXT_PARAMETER,'Yes');
     Add_Parameter(Repo_para,'BDATE',TEXT_PARAMETER,:BLOCK3.a_dptno);
     Add_Parameter(Repo_para,'EDATE',TEXT_PARAMETER,:BLOCK3.b_dptno);
     RUN_PRODUCT(REPORTS,'c:\apu\DDATE.rep', SYNCHRONOUS,
          runtime, FILESYSTEM,Repo_para,NULL);
end;
BDATE & EDATE are two user parameters created in report.
when i press the button in form pass parameters the report will be called but no data will be display but when i directly run reprot from report buider and pass same values of BDATE & EDATE it will show data.
please give me ur e mail address or help me for this problem
best regards,
shahzad

Passing parameters to reports from forms.

Hi
we are using developer suite 10g and developed some applications.Our reports are working from report buider and also from the forms when we are not passing any parameter.
But when we add the clause to pass the parameter from forms fields it does not show any values and we get a blank report.
when we use this code it works with default value set in the report
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no');
But when we use code to pass the parameter like this it does not work
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'EMPLOYEE_TICKET_NO='||lpad(ltrim(:hris_employee.em_ticket_no),5,' ')||'paramform=no');
Please suggest how to pass parameter values from forms.
Thanks in advance

Hi Ansu
In your code set paramform ='Yes' .Then run report ,it will show you the values that are passing through parameters.SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=yes');
If it doesnt work for you.
Try this code
declare
     pi_id paramlist;
begin
     pi_id := get_parameter_list('item_param');
if not Id_null(pi_id) then
     destroy_parameter_list(pi_id);
     end if;
pi_id := create_parameter_list('item_param');
add_parameter(pi_id,'PARAMFORM',TEXT_PARAMETER,'no');
/**********Add here your parameters***************/
add_parameter(pi_id,*'report parameter name'*,TEXT_PARAMETER,*value from form*);
RUN_PRODUCT(REPORTS,'c:\MAKESS\INVENT\REPORTS\add_mat_req.RDF',SYNCHRONOUS,RUNTIME,FILESYSTEM,
pi_id,NULL);
--Ajay Sharma

Problem with synchronize in web form

I'm runing forms server 6i with patchset 11...
I'have a java bean wich extends VTextField, wich opens a file dialog and returns the path+filename selected...
I have a navigable text item whose implementation class is this one for file dialog...
Java class returns ok the filename in text item,value shows up in the screen...but if I try to process the value returned in the text item,I receive null..i've even attached a when-validate-item trigger with the code: :text_item:= :text_item ...I have enough 'synchronize ' inserted all over the pl/sql code...the only situation when I receive the value is when I raise a message,or alert in the screen...after this :text_item holds the corect value...However this is annoying,as my customers want this alert removed...
does anyone has a idea about how can I notify forms about the wright window to synchronize with???
Does Forms management team Knows something about this?If it is a bug,I wan't to know so I won't lose any more time....

Thanks Duncan
This last solution with using the Handler is working,the internal value is updated...however,the screen value of the PJC is nor updated...
I'm using
this.setProperty(ID.VALUE,fileDirectory + fileName);
try
mHandler.setProperty(ID.VALUE,fileDirectory + fileName);
catch (oracle.forms.api.FException fe)
fe.printStackTrace();
System.gc();
return true;
I thinck I'll use that workaround with the get_custom_property....
However,if you're here,I thinck I have some other problem:
I have created a pjc on the forms wich imports or exports one line (identical with text_io package)
This pjc is managed by a pl/sql package also created by myself...from the pjc I'm sending custom events to the forms:endoffile,invalidinfile,invalidoutfile...all works ok,but if a try to import a whole file(performing a loop in pl/sql),no custom event is received by forms,even if the pjc certainly sends it...
That happens only while performing the loop...
Is there any special reason why this is happening?is the listener for custom_events disabled during loops execution?
I've found a workaround for this...I've created another endoffile property wich I'm reading after each line import...but this takes a lot of extra time,doesn't it?
Thanks for your time

Configuring OAS Form & Report Server services

I am trying use OAS Form Server Service,
My Enviroment:
1 Server SUN Server 250 Running Unix with Oracle 7.3 (App
Database)
25 PC 95/98 users Using forms and report 6i, connecting via Net8
This solution is working...!
We have a new NT Server to OAS Form Server Services.
What I want?
I need connect some people via web to use my application, but
I am not sure how make it..!
I am not need Portal or another services from OAS, I only
need Forms & Reports Server Services (I think..!).
Questions:
1) Is necessary install a Oracle Database On the
OAS Server that will be runing Forms &
Report Server (NT Server)?
2) What services must be installed on the NT server to
run Forms & Report Server?
3) When a End User use IE 5.0 to access my application from the
Web
He access to a Form Server, and this service start the
.fmx form, and this form use the Net8 to connect to DB, is
true?
4) If my form developed in form 6i run ok using Oracle 7.3.
I can use OAS Form Service to connect to the same database?
5) Is mandatory make a migration to 8.x on the
Sun Server (my app database server)?.
6) Is there a detail guide to install form server service and
make configuration to client and servers components?
Thanks
Mauricio

whats different between form and report server in developer whit OAShttp://download.oracle.com/docs/cd/B25016_08//doc/dl/web/B14361_02/config.htm#sthref10
OC4J Standalone is for use by development and small-medium scale production deployments. Specifically, OC4J Standalone supports HTTP and HTTPS natively without the use of Oracle HTTP Server. It does not have support for load balancing, clustering, or management through Oracle Enterprise Manager 10g. To use those features, customers must install one of the Oracle Application Server installation types, such as J2EE + WebCache. The standalone version is supported in a single instance, single JVM, and single machine configuration.

Unable to Run Report on Forms 6i

I have a probleam with Runing reports on froms 6i.when i use Run_report_object or run_object it does nothing even not display any message.

Is the report server installed?
Did your report get to the report server? did you check the queue manager?
Just sending a report to the server will not return it to the client.
did you check out the examples on the forms and reports integration paper on otn?

Runing Forms 9i from Forms Buider

Similar Messages

Maybe you are looking for