./runInstaller permission denied

Hi,All
Oracle unbreakable linux 5 32bit
Oracle 10.2.0.1
i trying to install oracle 10.2.0.1 and i got error ./runInstaller permission denied
so please guys help me

check some link(s):
and read this as generic user creation and kernel settings parts are almost same form 9i to 11gR2:
oracle 11gR1 installation eror on oel 5.2
Installing RAC 11gR2 in VMWare
[ http://forums.oracle.com/forums/thread.jspa?threadID=954684&tstart=15]
[ http://forums.oracle.com/forums/thread.jspa?threadID=958960&tstart=15]
beside this i have a request to you to giving a sketch(maybe a link/documents) in which way you are on.so that some of us can track you and give quick help...
HTH

Similar Messages

Installing 11gr2 in Oracle Linux 6.3 (./runInstaller - permission denied)

Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal ,
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment.
Thanks...
Edited by: flixblixclix on Jan 1, 2013 10:51 PM

979352 wrote:
Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
From Oracle® Database Installation Guide
11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
4.5.1 Running Oracle Universal Installer
For any type of installation process, start Oracle Universal Installer and install the software, as follows:
Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
>
Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM

Bash: /mnt/cdrom/runInstaller: /bin/sh: bad interpreter: Permission denied

hi,
i m new to oracle on linux
Oracle 10gR2 on RedHat Enterprise Linux 5
while running ./runInstaller
this error displays
bash: /media/database/runInstaller: /bin/sh: bad interpreter: Permission denied
can any one help me, please answer here or [email protected]

It's got nothing to do with who he's running the installer as (though he should indeed run it as the oracle user, of course).
It's got everything to do with the fact that a lot of distros these days automount their CDs with the noexec switch set. Meaning that no-one apart from root is allowed to execute programs from the mounted media. Centos 5 does it, so RHEL5 would do it too. OpenSuse10.3 doesn't do it; Fedora 8 does; Debian 4 does.
If your distro uses an old-fashioned fstab (Debian 4 does, for example), you could edit that and stick an explicit 'exec' switch in as one of the mount options (plain old "user", commonly specified, implies "noexec").
But RHEL5 and Fedora 8, for example, use a new udev-magic way of dynamically mounting removable media, so there's nothing listed in /etc/fstab until after a cd or dvd has been automounted... and by that stage, it's too late to edit what the mount options should be!
The fix for these sorts of distros is to become root and manually unmount any Oracle CDs or DVDs that have been automounted. You can then simply re-mount them by issuing a command such as
mount -o loop /dev/cdrom /media...and, because this manual mount doesn't include explicit noexec switches, you'll find that if you now become the oracle user, you'll be allowed to execute the runInstaller program normally.

RunInstaller ".oui: No such file" / "bad interpreter: Permission denied"

Hi,
The Oracle "runInstaller" script gives the following errors:
a) bad interpreter: Permission denied
b) .oui: No such file
Solution:
- insert the DVD
- umount /media/<tab>
- mount -o norock /dev/cdrom /media
Reason:
a) "gnome-mount" mounts iso9660 with "noexec" privileges.
b) Some DVD's require the mount "norock" option to prevent filename conversions.
The above is ok for the purpose of installing, but annoying if you don't know the solution. The thing with gnome-mount and HAL seems quit complex. I tried to change the gnome-mount defaults to include "exec" privileges, but without success.
yum install gconfig-editor
("gcon-editor" GUI - look under system/storage)
With DVD mounted to change settings for a particular volume , or without to change default for all:
gnome-mount --display-settings -d /dev/cdrom
gnome-mount --write-settings -d /dev/cdrom -m mnt
gnome-mount --erase-settings -d /dev/cdrom
Changing the default mount point inside /media worked, but it made no difference to set "exec" mount option (-o exec)
An entry in /etc/fstab overwrite these settings:
/dev/cdrom /media/mnt iso9660 norock,exec 0 0
which gives an error if the media is not present at shutdown or startup
How to change the defaults for gnome-mount to include "exec" for /dev/cdrom?
Kind regards.
Edited by: waldorfm on May 5, 2010 10:32 AM

Yes. Actually I thought I would post this because I was not able to "google" a solution. Apparently other people experienced the same problem and were not able to install from DVD.

-bash: ./runInstaller: /bin/sh: bad interpreter: permission denied

I have done all pre requisite configurations in Enterprise Linux R5 for the installation of Oracle Database 10g R2. When I run this ./runInstaller command from terminal window of Oracle user account. I got following error.
-bash: ./runInstaller: /bin/sh: bad interpreter: permission denied
Kindly send me the solution of this problem on urgent basis.
Thanks.
Shahzad

ls -la runInstaller
Check permission, that user can run.(execute)
By the way, if you use "oracle" user rune it...
Please Extract Oracle Source by oracle user.
Or user root user and change permission source ...
root$ cd SOURCE
root $ ls -la runInstaller
root$ chown -R oracle:oinstall .
example:
$ cd Disk1/
$ ls -la runInstaller
-rwxr-xr-x 1 oracle oinstall 1756 Mar 12 2008 runInstaller

RunInstaller Execute permission denied

Hi.
I downloaded the SW of ORACLE 9.2.0 from the web. I did all the steps to uncompress these 3 files (gunzip and cpio). But when I try to execute RunInstaller I've got the following error:
./runInstaller: ./runInstaller: Execute permission denied.
But the permissions are 777 in all the directories and all the files that are inside the directories. The owner is correct (oracle:dba)
My server is HPUX-11.00
Sometime, when you mount the CD but with the wrong options you have the same problem, but this time, y download the files from the web.
¿Anybody knows who can I solve this error?

Yes I have the ROOT in the server and I run the runInstaler with the oracle user and dba group but doesn't work. I run (to check the file) with root user but the same problem.

Permission denied when running runInstaller

I'm getting 'permission denied' message when running
runInstaller. I'm running the program directly from the CD. I'm
logged-in as oracle with 'dba' group. I've checked the
permissions on jre and it is fine. I can run jre on the
command-line without any problem. I also tried running the
runIns.sh and the same message is returned.
What could be the other reasons why I am getting this message?
null

I don't know if it has anyhting to do with it but I had a similar
problem. The difference was that I was part of the root group
not dba as you state. The documentation suggests using a group
called oinstall. Give it a try ... you never know how the
packages within the installtion might have been built.
kiwi (guest) wrote:
: I'm getting 'permission denied' message when running
: runInstaller. I'm running the program directly from the CD.
I'm
: logged-in as oracle with 'dba' group. I've checked the
: permissions on jre and it is fine. I can run jre on the
: command-line without any problem. I also tried running the
: runIns.sh and the same message is returned.
: What could be the other reasons why I am getting this message?
null

Bad interpreter: Permission denied whn installin ORACLE 11g on linux 32 bit

Hello All,
I have a VMWare that i installed into it Oracle enterprise Linux 5 32 bit, i am trying to install Oracle 11g R2 on it, i have the .iso oracle file, l linked the CD/DVD drive of the VMware to the location of this ISO file, and i applied all the steps mentioned in this link : http://www.oracle-base.com/articles/11g/OracleDB11gR2InstallationOnEnterpriseLinux5.php
i did: cd media and i found the runInstaller file but wen trying to run it: ./runInstaller i am facing the below :
[root@oel5 media]# cd V17489-01/
[root@oel5 V17489-01]# ls
doc install response rpm runInstaller sshsetup stage welcome.html
[root@oel5 V17489-01]# ./runInstaller
-bash: ./runInstaller: /bin/sh: bad interpreter: Permission denied
your help is appreciated please.
Regards,

The problem is that gnome-mount will not give you execute rights on CD/DVD content. The solution is at the below link in the Tips section:
Installing Oracle 11g R2 on Ubuntu 10 Howto
Logout your current X-session and login as user Oracle
Insert the Oracle Installation DVD
Or from a remote terminal session:
Insert the Oracle Installation DVD
sudo umount /dev/sr0
Create a new session as user Oracle
ssh -Y oracle@server_address
sudo mount /dev/sr0 /media
/media/database/runInstaller
If you see "runinstaller" instead of "runInstaller" you can try the following:
sudo mount -o loop,norock /dev/cdrom /media
more also here:
runInstaller ".oui: No such file" / "bad interpreter: Permission denied"
Edited by: Joe Shmoe on Nov 5, 2010 11:45 AM

Permission denied :Oracle 10g on RHEL4

I am using ubuntu 10.10 and Virtualbox installed on it.I have installed red hat (RHEL4) on virtualbox.When i try to run the oracle installer from the cdrom i get the following error "permission denied".I am have tried to edit fstab entry in /etc but it didnt worked.I am only getting a read permission and unable to chmod it.

Automount does not mount cd/dvd rom media with execute privileges.
If you prefer a permanent solution, you can try the following:
Find the following line in /etc/auto.misc:
cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
and add exec so it look like:
cd -fstype=iso9660,ro,nosuid,nodev,exec :/dev/cdromI usually add the Oracle to root sudoers (visudo command), at least for the duration of the install. Then simply do:
- Insert DVD or mount iso in Virtualbox
- Oracle User: sudo umount /dev/cdrom
- Oracle User: sudo mount /dev/cdrom /media
If you see "runinstaller" instead of "runInstaller" you may have some hybrid dvd and you can try the following:
sudo mount -o loop,norock /dev/cdrom /media
Btw: Installing Oracle 11g R2 on Ubuntu 10 Howto:
Installing Oracle 11g R2 on Ubuntu 10 Howto

OUI permission Denied when trying to Install 10gr2 on RHEL5

Hi,
I have been trying to install oracle1ogr2 on RHEL5 on our test server and i m following the procedure mentioned in this site http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
The problem that i m facing for past 2 days is ...when i try to execute runInstaller i get this message
*./runInstaller: line 54: /home/oracle/Disk1/database/install/.oui: Permission denied*
Inspite of following all the the steps i m stuck at this one point. It would really be great if some one could help me out me this.
Thanks,
Edited by: Suhail Faraaz on Jul 19, 2010 11:51 PM

oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-07-20_01-15-18PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-07-20_01-15-18PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary0(Unknown Source)
        at java.lang.ClassLoader.loadLibrary(Unknown Source)
        at java.lang.Runtime.loadLibrary0(Unknown Source)
        at java.lang.System.loadLibrary(Unknown Source)
        at sun.security.action.LoadLibraryAction.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
        at sun.awt.DebugHelper.<clinit>(Unknown Source)
        at java.awt.Component.<clinit>(Unknown Source)Now this is what i m receiving

ShowF4KeyAndValueHelp - Permission denied

I am trying to use "ShowF4KeyAndValueHelp" to let the user choose from a list of Customers displayed in a pop up window. But when one of the listed customers is seleced, there is an error "Permission denied".
Therefore the selected customer cannot be copied into the inputField.
Do you know the cause of this error?

I don't know if it has anyhting to do with it but I had a similar
problem. The difference was that I was part of the root group
not dba as you state. The documentation suggests using a group
called oinstall. Give it a try ... you never know how the
packages within the installtion might have been built.
kiwi (guest) wrote:
: I'm getting 'permission denied' message when running
: runInstaller. I'm running the program directly from the CD.
I'm
: logged-in as oracle with 'dba' group. I've checked the
: permissions on jre and it is fine. I can run jre on the
: command-line without any problem. I also tried running the
: runIns.sh and the same message is returned.
: What could be the other reasons why I am getting this message?
null

AddFavorite Permission Denied

I have a piece of AS code as below;
getURL("javascript:window,external.AddFavorite('http:\\mysite.com',
'mySite');");
This has been working fine adding a favorite to Internet
Explorer 6. And then My XP machine got upgraded to Service Pack2.
Now all I get is 'Permission Denied' error. Is there another
way to add IE favorites from flash?
Thanks

I don't know if it has anyhting to do with it but I had a similar
problem. The difference was that I was part of the root group
not dba as you state. The documentation suggests using a group
called oinstall. Give it a try ... you never know how the
packages within the installtion might have been built.
kiwi (guest) wrote:
: I'm getting 'permission denied' message when running
: runInstaller. I'm running the program directly from the CD.
I'm
: logged-in as oracle with 'dba' group. I've checked the
: permissions on jre and it is fine. I can run jre on the
: command-line without any problem. I also tried running the
: runIns.sh and the same message is returned.
: What could be the other reasons why I am getting this message?
null

Bash: ./jdev: /bin/sh: bad interpreter: Permission denied

Unzipped the jdevj2eebase1013.zip
Set permissions as per install guide.
Try to run jdev get this error
bash: ./jdev: /bin/sh: bad interpreter: Permission denied
Note the install guide says to run $ jdev
from command line, surely this means
$ ./jdev
instead. Tried it verbatim but get
hj54@devhost:~/downloads/oracle/10g/jdeveloper10.1.3pre/jdev/bin> jdev
bash: jdev: command not found
Distro is Novell Linux Desktop ( Suse 9.0 )

ls -la runInstaller
Check permission, that user can run.(execute)
By the way, if you use "oracle" user rune it...
Please Extract Oracle Source by oracle user.
Or user root user and change permission source ...
root$ cd SOURCE
root $ ls -la runInstaller
root$ chown -R oracle:oinstall .
example:
$ cd Disk1/
$ ls -la runInstaller
-rwxr-xr-x 1 oracle oinstall 1756 Mar 12 2008 runInstaller

Apache user dir (13)Permission denied: access to /~simha/ denied

I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.

Do you have [or more like lack] +x on the user folder?

WebCache Failed to start : Failed to assign port 80: Permission denied

Hi All,
I have three server running IAS 10.1.2.0.2, running forms and reports application. One Infra and two Midtier.
Suddenly Midtier1 is crashed, but before it happen I have already backup with TAR : OracleHome and all its related configuration files.
After the crash, I reinstall the RH Linux same version and update and then restore ( TAR -xvf ) the backup that I have.
When I run opmnctl startall, all ias-component started, EXCEPT one : WEB CACHE.
When I look at Webcache event Log, here is the error :
[11/May/2004:17:29:05 +0700] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[11/May/2004:17:29:05 +0700] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[11/May/2004:17:29:05 +0700] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[11/May/2004:17:29:05 +0700] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[11/May/2004:17:29:05 +0700] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[11/May/2004:17:29:05 +0700] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[11/May/2004:17:29:05 +0700] [alert 13305] [ecid: -] Failed to assign port 80: Permission denied
[11/May/2004:17:29:05 +0700] [alert 9707] [ecid: -] Failed to start the server.
[11/May/2004:17:29:05 +0700] [alert 9609] [ecid: -] The server process could not initialize.
[11/May/2004:17:29:05 +0700] [notification 9610] [ecid: -] The server is exiting.
[11/May/2004:17:29:05 +0700] [alert 9000] [ecid: -] Process 3268 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
[11/May/2004:17:29:05 +0700] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oraias/ewallet.p12 does not exist.
[11/May/2004:17:29:05 +0700] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oraias/ewallet.der does not exist.
[11/May/2004:17:29:05 +0700] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oraias/cwallet.sso does not exist. Wallet does not appear to be autologin wallet.
[11/May/2004:17:29:05 +0700] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connections supported to origin servers.
[11/May/2004:17:29:05 +0700] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location /etc/ORACLE/WALLETS/oraias, NZE-28759, as user oraias
[11/May/2004:17:29:06 +0700] [notification 9607] [ecid: -] The admin server started successfully.
How can I solve this problem ?
Thank you for your help,
xtanto

Hi xtanto,
You may not have set up the privileges for running on a port less than 1024 (i.e. port 80) in your old back-uped tar-file.
Please check Chapter 8 "Running webcached with Root Privilege" in the Web Cache Admin document.
http://download-east.oracle.com/docs/cd/B14099_19/caching.1012/b14046/basics.htm#sthref1060
Regards,
Martin

./runInstaller permission denied

Similar Messages

Maybe you are looking for