Running a SQL Script step invoking PeopleSoft binary

Running PeopleTools upgrade from 8.53 to 8.54.
At step, Running the Updated PeopleTools Script, it fails as show below. It does not make sure while all the above steps where SQL Script is involved ran successfully but this one. Did anybody run into the same issue?
Appreciate any suggestions

looks different, ideally it should not through this error.
If your access id details are fine, then raise a case with oracle

Similar Messages

Running a SQL Script to Create an Object Type

When I do Database Development with JDeveloper and fellow the instruction at
http://www.oracle.com/technology/obe/obe1013jdev/dbdevelopment/obe_%20dbasedevmt.htm
and try to Running a SQL Script to Create an Object Type by Right-clicking emp_rec.sql in the editor and
choose Run in SQL*Plus > hrconn, the new Obuect type can not created. The screen flashs and I only got the
message
"Invoking SQL*Plus...
D:\oracle\product\10.2.0\db_1\BIN\cemutls.exe
hr@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=ORCL)))
@emp_rec.sql" and nothing else (No error like JBO-XXXXX).
Can anybody Help Me? Thanks a lot!
SID: ORCL

Hi Simon,
Having had a closer look at your original message it seems that rather than selecting the SQL*Plus executable in the directory you have managed to select the file 'D:\oracle\product\10.2.0\db_1\BIN\cemutls.exe'.
If you go to 'Tools | Preferences' and select the 'Database Connections' node and alter the 'SQL*Plus Executable' field to 'D:\oracle\product\10.2.0\db_1\BIN\sqlplus.exe' and then try again, this should then work.
Regards,
Lisa

Silent installation then run a sql script

I'm trying to do a silent install of 10g on a windows server.
I have created the response file and it works correctly.
After the oracle software has successfully installed I want to run some sql scripts on the newly created database, how do I do this automatically?
I have tried to create a batch script to do it but because the setup command opens in a separate window it never returns back to the batch script to run the sql.
install.bat:
start /wait c:\oracle_software\database\install_oraclesw.bat
call run_sqlscripts.bat
pause
install_oraclesw.bat:
setup -silent -responseFile c:\oracle_software\database\response\standard.rsp -nowait
Thanks in advance

I'm doing a 10gr1 silent install and one problem I ran into was the setup executes when cause java, then it closes, so the next step in my script executed immediately.
I had to use the choice command to bring up a prompt to pause the script.
start cmd /c setup.exe -responseFile c:\stardard.rsp -nowelcome -silent
choice /C YN /M "Press Y if install completes successufully, else press N."

How can I run a SQL script file...

How can I run a SQL script file from a location on my computer without providing the whole path?
Is there some way I can set a "Working folder" in SQL Plus??
Thanks!
Tom

You can create an environment variable called "SQLPATH" which is a list of directories that SQL*Plus will search for your .SQL
scripts.
I would like to use another directory than the oracle/bin...
How can I do this ??
Hello,
U can do this by this way:
Save odm_script.sql file to the default Oracle
directory i.e. Oracle-Home/bin and Run following command
through SQL Plus.
SQL>@Script_Name
I hope this will resolve ur problem.
Regards,
Omer Saeed Khan.

How to run a sql script in oracle forms

Hi,
For me there is an sql script. I need to run that sql script in forms.
Actually we will run that sql file in pl/sql developer by giving @and the file name.
But how to run that file in forms.
Can any one help on these.Which book I have to look.
Thanks

Actually there is a script files which will drop all the indexes and tables.
DROP querry will be there for each index and each table.
So I run the script all the indexes and all the tables will be deleted. So using forms I have to run that script.
Thanks

Getting windows error during running the sql scripts from form 6i

I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.

I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
     output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
          Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
     Get_Connect_Info(un,pw,cn);
     /* for Plan_table Begg. Second INNER BLOCK */
     declare
          dummy2 varchar2(40);
     begin
     select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
     if dummy2 = 'PLAN_TABLE' then
     output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
     end if;
     exception
     when no_data_found     then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
     end; --

How to run the SQL Script in SQL Prompt?

Hi ExpertGroup,
I have written one SQL Script name called "MySQLSCript.SQL". I want to know how to run the SQL Script in SQL Prompt?.
Generally, I run SQL Script in PL/SQL Developer tool. But In this case, some SET command is not working/supporting in PL/SQL Developer Tool.
Let me know, How to Run in SQl Prompt.
Thanks & Regards,
Senthil K Kumar.

This is my SQL Script....
SET COLSEP '|'
SET LINESIZE 32767
SET PAGESIZE 50000
/* SET LINESIZE 3000
SET PAGESIZE 50000
SET DEFINE OFF */
SET ECHO OFF
SET FEEDBACK OFF
--SET HEADING OFF
SET TRIMSPOOL ON
SET NEWPAGE NONE
SET UNDERLINE OFF
SPOOL &&EnterPath;
SELECT * FROM &&TableName;
SPOOL OFF
SET FEEDBACK ON
--SET DEFINE ON
PROMPT Done.
I am able to run this script in SQL Prompt....
Its executing fine...
But, If I am executing again it maynot asking for new set of data....
alternativily its taking old values only.....
how can i exeute with new set of data in the sql prompt.....

AWM 11.1.0.7B question running global_11g_create_cubes.sql script

Hi everybody,
I installed AWM 11.1.0.7B and Oracle Database 11g software, version 11.1.0.6.0.
I am trying to install Sample Schemas & Code.
I got an error running global_11g_create_cubes.sql script that I downloaded from the http://www.oracle.com/technology/products/bi/olap/olap_downloads.html#software
Here is an error:
Begin installation
... deleting GLOBAL AW (if it exists)
... creating GLOBAL AW
begin
ERROR at line 1:
ORA-37162: OLAP error
XOQ-00506: Unable to parse XML string sent from the client to the server
ORA-06512: at "SYS.DBMS_CUBE", line 88
ORA-06512: at "SYS.DBMS_CUBE", line 134
ORA-06512: at "SYS.DBMS_CUBE", line 154
ORA-06512: at "SYS.DBMS_CUBE", line 144
ORA-06512: at "SYS.DBMS_CUBE", line 181
ORA-06512: at line 2
The following line in the script gives an error:
dbms_cube.import_xml('GLOBAL_INSTALL', 'GLOBAL_MV.XML');
Any help will be greatly appretiated.
Thank you.
- t

I suspect the problem is that you are using an 11.1.0.7 client to access an 11.1.0.6 server. This configuration should work, but there was a bug at some point with new clients and old servers. In any case you would be advised to upgrade your server to either 11.1.0.7 or, at least, the latest 11.1.0.6 OLAP patch.

Error 45 Initializing In SQL*Plus When Running A Sql Script

Hi All
I have a daily scheduled jobs running on Windows server 2003 and 2008. Oracle Version :10.2.0.1 and 10.2.0.4
right now jobs are not even starting when i run them manually. Found the error Error 45 Initializing In SQL*Plus When Running A Sql Script.
it says Bug:3039738.
what is the solution to fix this Bug ?
thanks
Shawn

user9174724 wrote:
Hi
do you think the Problem is not with the script ?
when i run the job its reaching SQLPLUS and giving error
Error 45 Initializing In SQL*Plus When Running A Sql Script .
Server:windows 2003 and oracle version :10.2.0.1
CMD /C %ORACLE_HOME_PRIME%\bin\sqlplus.exe /NOLOG @ %xxxx_HOME%\DBA_Backup\BackupDo.sql testdb BackupFull
The above line does the following:
1) launches a command procesor
2) passes that command processor the following command line parms:
/C
(process the following command, then terminate)
%ORACLE_HOME_PRIME%\bin\sqlplus.exe
the launched processor will process the executable 'sqlplus.exe' found in the \bin subdirectory, found in the directory indicated by the environment variable ' ORACLE_HOME_PRIME'. The remainder of the command line will be passed to sqlplus.exe for interpretation and processing
/NOLOG
tell sqlplus to start up without trying to immediately log on to a database
typically used to indicate to sqlplus that the immediately following string names a file of sql and sqlplus commands to be processed.
%xxxx_HOME%\DBA_Backup\BackupDo.sql
tell sqlplus to execute the commands found in the file 'BackupDo.sql', found in the subdirectory DBA_Backup, found in the directory name by the environment variable 'xxxx_HOME'.
testdb
BackupFull
pass the values 'testdb' and 'BackupFull' to be used as values for substitution variables &1 and &2 in the file 'BackupDo.sql'
Script:
rmanbackup.rman
BACKUP AS COMPRESSED BACKUPSET DATABASE FORCE PLUS ARCHIVELOG;
DELETE NOPROMPT ARCHIVELOG ALL BACKED UP 2 TIMES TO DEVICE TYPE DISK;
LIST BACKUP SUMMARY;
LIST BACKUP;
EXIT;I don't know what you expect of this. It is an rman script and we've seen no sign of an rman script being executed in any of what you've shown us. RMAN commands are processed by rman, not sqlplus.
Unfortunately, you didn't think showing us the contents of BackupDo.sql was of any value in finding out what your problem was.
Edited by: EdStevens on Jul 11, 2011 7:58 PM

How and where to run utlxplan.sql script?

Hi,
A basic question: where and how to run utlxplan.sql script? I'd like to know both in window and linux environment.
regards.....

From sqlplus, you can connect as sys and run the utlxplan.sql. Then you need to grant privileges to other users and create synonyms...

Run multiple sql scripts using osql

We have 2 databases which should be installed on each and every sql server.
STEPS DONE
1. scripted out these two DB'S as    ex:    db1.sql     db2.sql
2.Scripted lookup tables in these DB's into two scripts        ex:   lookup1.sql   lookup2.sql
3.scripted permissions of service accounts in two databases as     ex: perm1.sql    perm2.sql
In order to run all these scripts in sequence I am planning to use an batch file which executes all these scripts in sequence and also we know the database creation script db.sql looks for the same path for DATA and LOG file locations as it is in the script. Is
that possible to use parameters to allow dba to set location paths while running batch file?
The sequence should be as
db1.sql
lookup1.sql
perm1.sql
db2.sql
lookup2.sq
perm2.sql

Setup a ControlParms table. Let the DBA configure the values in the table.
Change the .sql scripts to read the ControlParms table for path or other configuration value.
Dynamic SQL: http://www.sqlusa.com/bestpractices/dynamicsql/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

OEM12c Job - Run a SQL Script from a central location against multiple targets

Hi All:
I need to execute a SQL script that can be run as OEM Job against multiple targets from a single location so that the output csv files are all in that central location. My problem is that the sql script job documentation says "Make sure that the script file is installed in the appropriate location on all targets". Is anyone aware of a way I can do this so that the SQl script is executed from a location on my OMS console?
Cheers

Hi
Create SQL job to run against on the server. Save those results (csv) file in local target. And crete one OS job, to collect all csv files into your OMS Console.
Regards
Krishnan

Running utlbstat.sql script

for testing performance i want to run the utlbstat.sql script
can i run this script using windows run command.
i cant run utlesast.sql also.
so i cant see the report using report.txt

The UTLBSTAT.SQL is ran from the SQL prompt in SQLPLUS like this as in the case of UN*X:
SQL> @ ${ORACLE_HOME}/rdbms/admin/utlbstat.sql
The @ tells SQLPLUS to read the commands/statements from a file.
It is on a similar path in windoze.
William

Run 2 SQL Agent Steps In Parallel

Hello,
Is it possible to execute 2 STEPS within a SQL Agent Job to run in parallel?
Right now the option for each step is go to Next Step or Go To Step zzz. Is it possible to go to multiple steps so steps can be fired off in parallel instead of sequential? Is this limitation of the SQL Agent Job? Sequential would waste
a lot of valuable time as each step imports into different tables so no conflict.
Your help is appreciated!

Step x will be execute Transact SQL type with multiple start job t-sql commands (sp_start_job). But each t-sql command is running sequential, not parallel, right?
Yes it will run sequential,but each step can use parallelism ( where same request ,which is broken into different tasks run in parallel) to get it completed if you have made necessary changes.By default things will be sequential.
Also, Step x will wait until all jobs are completed before the next step right?
Yes
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Running a SQL Script during task sequence

We are about to roll out new workstations to our entire enterprise. With that rollout comes updated software. The primary application that our end users work with on a daily basis uses SQL Express 2008 R2. A challenge that we've come across
is with a SQL script that we need to run, after the workstation has joined our domain. I have created a batch file, and copied it to the same directory as the AddADGroup.sql script. I have created an application in SCCM to run the batch file and
SQL script. The following is the batch file:
@echo off
Set Path=%path%;C:\Program Files\Microsoft SQL Server\110\Tools\Binn
echo.
SQLCMD -S .\SQLEXPRESS -U sausername -P xxxxxxxxxxxxxxxxx -i AddADGroup.sql
echo.
What I need to know is how to get this batch file to run, and be successful (about 4000 times). Is running this batch file the best practice? If not, what is the alternative?
Thanks! Nate

Hi,
The following blog describes that how to deploy bat and script by Packages.
SCCM 2012 – deploying bat files and scripts
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice.
Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Running a SQL Script step invoking PeopleSoft binary

Similar Messages

Maybe you are looking for