Running a State Transition on Startup

Hi there
Trying to get my ap to change state on startup to run a
transition animation. The idea is that this is a nice way to bring
the ap to life, with some movement to bring the interface in.
Is there a simple trick to do this?
I have tried state="
startupState" in the WindowedApplication line which works
for me in a Flex ap, but in Air produces a long list of complaints
about transition effects under the category:
TypeError: Error #1009: Cannot access a property or method of
a null object reference
I have tried creationComplete="state='
startupState'" but get the same result
Any suggestions? I am quite new to this so may have missed
something obvious, or perhaps there is a better way than using a
state transition to run a bit of animation on the interface at
startup?
Any help much appreciated
Andy

Hello
The self-help bureau here...(!)
Just in case anybody else is looking into this I have the
solution...
One of my Zoom transitions was set to a duration of zero.
This plays happily in the Flex world
In Air land on the other hand zero's are no-no's, so simply
setting the duration to 0.001 resolved the issue

Similar Messages

Where to run SQL statements in Oracle Database 11gR1 ?

Folks,
Hello. I have just installed Oracle Database 11gR1 and login to Database Control page. There are 4 tabs on the top: Database, Setup, Preference, Help and Logout.
I just create a table "table1" in "Database" tap. But I don't see anywhere to run SQL statement such as Select, Insert, Update.
Can any folk tell me where to run SQL statements in Oracle Database 11gR1 ?
Or
Can any folk provide a User Manual for Oracle DB 11gR1 ?

You can run from a terminal or install an SQL client and connect from there.
http://www.articlesbase.com/databases-articles/how-to-install-oracle-11g-client-1793770.html
Best Regards
mseberg
Assuming you have an oracle OS user on Linux you can try typing sqlplus at you OS command prompt. Generally you will have a .bash_profile with setting like this:
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0
#export DISPLAY=localhost:0.0
export TZ=CST6CDT
export ORACLE_SID=ORCL
export ORACLE_TERM=xterm
#export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
export NLS_LANG=AMERICAN;
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_LIBRARY_PATH
# Set shell search paths
PATH=/usr/sbin:$PATH; export PATH
export PATH=$PATH:$ORACLE_HOME/bin
# CLASSPATH:
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib
export EDITOR=vi
set -o vi
PS1='$PWD:$ORACLE_SID >'Edited by: mseberg on Jul 11, 2011 3:18 PM

Open MQ 4.3 "Bad transaction state transition"

We have Open MQ 4.3 in remote, enhanced cluster. We are seeing ERRORs and WARNINGs in broker log file. They occur sporadically, once every couple hours or so. I think they might be related. Anyone have an idea what the problems may be?
1) "Bad transaction state transition"
[30/Jun/2009:00:48:12 EDT] ERROR com.sun.messaging.jmq.jmsserver.util.BrokerException: Bad transaction state transition. Cannot perform operation PREPARE_TRANSACTION(56) (XAFlag=null) on a transaction in state STARTED(1).: TUID=8284690576893811200 Xid=62726970706C303130302E6263627372692E6F72672C7365727665722C5032363137332C00E11C0000CD99242E62726970706C303130302E6263627372692E6F72672C7365727665722C503236313733:
com.sun.messaging.jmq.jmsserver.util.BrokerException: Bad transaction state transition. Cannot perform operation PREPARE_TRANSACTION(56) (XAFlag=null) on a transaction in state STARTED(1).
at com.sun.messaging.jmq.jmsserver.data.TransactionState.nextState(TransactionState.java:440)
at com.sun.messaging.jmq.jmsserver.data.handlers.TransactionHandler.doPrepare(TransactionHandler.java:1625)
at com.sun.messaging.jmq.jmsserver.data.handlers.TransactionHandler.handle(TransactionHandler.java:551)
at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181)
at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489)
at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644)
at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170)
at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493)
at java.lang.Thread.run(Thread.java:595)
2) "ROLLBACK_TRANSACTION(48): Ignoring unknown XID"
[29/Jun/2009:22:54:34 EDT] WARNING ROLLBACK_TRANSACTION(48): Ignoring unknown XID=62726970706C303130302E6263627372692E6F72672C7365727665722C5032363137332C0006140000CD99242E62726970706C303130302E6263627372692E6F72672C7365727665722C503236313733 broker will notify the client
3) "Heartbeat timeout"
[29/Jun/2009:22:54:14 EDT] WARNING [B2122]: Heartbeat timeout from /192.168.106.192:32000 [brokerID=jmsnode_brippl0301, brokerSession=8155493556708599552] (seq#=7856, ts=1246330447089, interval=2, len=231) sender=/192.168.106.192:57964
Steve

Your question has also been posted to mq-interest alias with broker/appserver log files. The following is based on the log files:
1) "Bad transaction state transition"
The server.log you provided shows that right before this exception, there was appserver exception as below. It appears that something was wrong with the application/appserver state:
[#|2009-06-29T19:03:32.253-0400|WARNING|sun-appserver9.1|javax.enterprise.system.core.transaction|_ThreadID=22;_ThreadName=JMSJCA sync #0(queRouterRequest);Context=RouterJMS_ESB_R1_0032_PPMO_090626/queRouterRequest_svcBpRouterJMS_ejb;_RequestID=f92d8d20-1abb-4c0b-b6eb-cd205eabcd37;|JTS5041: The resource manager is doing work outside a global transaction
javax.transaction.xa.XAException
2) "ROLLBACK_TRANSACTION(48): Ignoring unknown XID"
This can be ignored. By looking at a couple of such WARNING messages in the broker log you provided
- The transaction was cleaned up on client connection closing and then the client reconnects, appserver attempts to rollback the old transaction.
3) "Heartbeat timeout"
This will be logged if the broker didn't receive heartbeat from the other broker for configured timeout period. This can happen occasionally due to network fluctuation. The heartbeat timeout values can be adjusted by broker "Failure Detection Properties"
http://docs.sun.com/app/docs/doc/820-6740/gguju?a=view

State transitions from Modules

My application.mxml defines my state transitions and loads a couple of modules at startup - GuestSearch and GeneralInformation. In the GuestSearch, there is a button that when clicked, should remove the GeneralInformation module on the right and replace it with a different third module, GuestSearchResults. I'm new to Flex, so I haven't quite got my mind around the proper way to handle application flow.
[application.mxml]
    <mx:states>
        <mx:State name="GuestSearch"> // initial state
            <mx:AddChild relativeTo="{leftSide}" position="lastChild">
                <states:GuestSearch/>
            </mx:AddChild>
            <mx:AddChild relativeTo="{rightSide}" position="lastChild">
                <states:GeneralInformation/>
            </mx:AddChild>
        </mx:State>
        <mx:State name="GuestSearchResults"> // state to go to after button click in module1
            <mx:RemoveChild target="{rightSide}"/>
            <mx:AddChild relativeTo="{rightSide}" position="lastChild">
                <states:GuestSearchResults/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Canvas x="0" y="54" width="100%" height="100%" backgroundColor="#8591C2">
        <mx:constraintColumns>
            <mx:ConstraintColumn id="col1" width="300"/>
            <mx:ConstraintColumn id="col2" width="100%" />
        </mx:constraintColumns>
        <mx:Canvas id="leftSide" left="col1:7" top="9" bottom="9" right="col1:4"/>
        <mx:Canvas id="rightSide" left="col2:4" top="9" bottom="9" right="col2:7"/>
    </mx:Canvas>
My question is since this information is defined in my application.mxml, how can clicking on the button in the GuestSearch module reference the states defined in the application.mxml so as to swap modules?
Thanks for the help
Brian

Is this the preferred way to do this kind of navigation - by putting all state transitions in the application.mxml? Or should state be defined in the GuestSearch module?

Running a Java program at startup in Linux

Hello
How do I run a Java program at startup in Linux? I know in Windows I can put a .bat file in C:\Windows\Start Menu\Programs\StartUp\ directory, but in Linux I have no idea how it is done.
Thank you,
Mihai

This is really a Linux question, not Java.
And then it depends on the version of Linux you are using.
Maybe this will help, otherwise you should try on a forum for your version of Linux.

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

Is there a way to make state transitions/animations of a fl.control states - button for example ?

Is there a way to make state transitions/animations of a fl.control states - button for example ?
All I can do now is change the skin design and that's it, I can't animate between states like I can with Flash Builder skins. So is there a way to do that, any technique or I have to create a button component from scratch?
Thanks!

simplebuttons have upState etc properties you can use to assign movieclips to the 3 states. you can use the currentFrame property of movieclps to (appear to) smoothly transition from one state to another.

PPP Dialup cnx fails - Mica modem never completes state transitions

I have a NAS (LAC) serving PPP calls over PSTN for multiple customers and for this particular connection, the call always drops at the 'State Transition to Ranging". I have another CE router succesfully calling the NAS and usingeaxctly the same external modem, so it proves the NAS works correctly.
What's the 'Ranging state'? What happens here? What causes the Mica modem to go into that state?   Any help to solve this problem will be very much appreciated.
NAS Details:
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-J-M), Version 12.3(22), RELEASE SOFTWARE (fc2)
cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of memory.
NAS Debugging output:
Mar 1 17:05:22 UTC: VDEV_ALLOCATE: 1/33 is allocated
Mar 1 17:05:22 UTC: EVENT_FROM_ISDN: dchan_idb=0x623BA450, call_id=0x2E41, ces=0x1
   bchan=0xD, event=0x1, cause=0x0
Mar 1 17:05:22 UTC: dev in call to isdn : set dnis_collected & fap_notify
Mar 1 17:05:22 UTC: EVENT_FROM_ISDN:(2E41): DEV_INCALL at slot 1, port 33
Mar 1 17:05:22 UTC: EVENT_FROM_ISDN: decode:calling oct3 0x21, called oct3 0xA1, oct3a 0x83,mask 0x3F
Mar 1 17:05:22 UTC: EVENT_FROM_ISDN: csm_call_info:calling oct3 0x21, called oct3 0xA1, oct3a 0x83,mask 0x3F
Mar 1 17:05:22 UTC: CSM_PROC_IDLE: CSM_EVENT_ISDN_CALL at slot 1, port 33
Mar 1 17:05:22 UTC: Mica Modem(1/33): Configure(0x1 = 0x0)
Mar 1 17:05:22 UTC: Mica Modem(1/33): Configure(0x23 = 0x0)
Mar 1 17:05:22 UTC: Mica Modem(1/33): Call Setup
Mar 1 17:05:22 UTC: csm_connect_pri_vdev: TS allocated at bp_stream 1, bp_Ch 3, vdev_common 0x61D53E9C 1/33
Mar 1 17:05:23 UTC: Mica Modem(1/33): State Transition to Call Setup
Mar 1 17:05:23 UTC: Mica Modem(1/33): Went offhook
Mar 1 17:05:23 UTC: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 1, port 33
Mar 1 17:05:23 UTC: EVENT_FROM_ISDN: dchan_idb=0x623BA450, call_id=0x2E41, ces=0x1
   bchan=0xD, event=0x4, cause=0x0
Mar 1 17:05:23 UTC: EVENT_FROM_ISDN:(2E41): DEV_CONNECTED at slot 1, port 33
Mar 1 17:05:23 UTC: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_ISDN_CONNECTED at slot 1, port 33
Mar 1 17:05:23 UTC: Mica Modem(1/33): Link Initiate
Mar 1 17:05:23 UTC: %ISDN-6-CONNECT: Interface Serial0:13 is now connected to 02155915479 N/A
Mar 1 17:05:24 UTC: Mica Modem(1/33): State Transition to Connect
Mar 1 17:05:24 UTC: Mica Modem(1/33): State Transition to V8bis Exchange
Mar 1 17:05:28 UTC: Mica Modem(1/33): State Transition to Link
Mar 1 17:05:32 UTC: Mica Modem(1/33): State Transition to Ranging <- !!!!!! Call drops here *******
Mar 1 17:05:59 UTC: %ISDN-6-DISCONNECT: Interface Serial0:13 disconnected from 02155915479 , call lasted 36 seconds
Mar 1 17:05:59 UTC: EVENT_FROM_ISDN: dchan_idb=0x623BA450, call_id=0x2E41, ces=0x1
   bchan=0xD, event=0x0, cause=0x10
Mar 1 17:05:59 UTC: EVENT_FROM_ISDN:(2E41): DEV_IDLE at slot 1, port 33
Mar 1 17:05:59 UTC: CSM_PROC_IC7_OC6_CONNECTED: CSM_EVENT_ISDN_DISCONNECTED at slot 1, port 33
Mar 1 17:05:59 UTC: Mica Modem(1/33): Link Terminate(0x6)
Mar 1 17:05:59 UTC: CSM(1/33): Enter csm_enter_disconnecting_state
Mar 1 17:06:00 UTC: EVENT_FROM_ISDN: dchan_idb=0x623BA450, call_id=0x2E41, ces=0x1
   bchan=0xD, event=0x0, cause=0x0
Mar 1 17:06:00 UTC: VDEV_DEALLOCATE: slot 1, port 33 is deallocated
Mar 1 17:06:00 UTC: Mica Modem(1/33): State Transition to Terminating
Mar 1 17:06:00 UTC: Mica Modem(1/33): State Transition to Idle
Mar 1 17:06:00 UTC: Mica Modem(1/33): Went onhook
Mar 1 17:06:00 UTC: CSM_PROC_IC8_OC8_DISCONNECTING: CSM_EVENT_MODEM_ONHOOK at slot 1, port 33
Mar 1 17:06:00 UTC: CSM(1/33): Enter csm_enter_idle_state
CE Router Details:
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(25a), RELEASE SOFTWARE (fc2)
CE External Modem: Paradyne3920
chat-script:
ABORT ERROR ABORT BUSY ABORT "NO ANSWER" "" AT&F\\D1\\Q3M0&D2&R0&S1S55=1S0=2&W OK "ATDT \T" TIMEOUT 60 CONNECT \c

RMAN-10006: error running SQL statement: alter session set remote_dependenc

Backups are failing with following error
RMAN-00554: initialization of internal recovery manager package failed
RMAN-12001: could not open channel default
RMAN-10008: could not create channel context
RMAN-10002: ORACLE error: ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must be from among MANUAL, AUTO
RMAN-10006: error running SQL statement: alter session set remote_dependencies_mode = signature
Not able to change to signature
SQL> alter session set remote_dependencies_mode=signature;
ERROR:
ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must
be from among MANUAL, AUTO
I dont see MANUAL or AUTO as valid value for this parameter (http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1175.htm#1023124) DB version is 9.2.0
Parameter type
String
Syntax
REMOTE_DEPENDENCIES_MODE = {TIMESTAMP | SIGNATURE}
Default value
TIMESTAMP
Parameter class
Dynamic: ALTER SESSION, ALTER SYSTEM
=======================================
I believe it could be because of following bug
"A PRE-PATCHED ORACLE IMAGE CAN BE INSTALLED IN MEMORY "
Refer: "https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1613505143885559758::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,4610411,1,1,1,helvetica"
I appreciate your effort in fixing this issue.
Edited by: user10610722 on Nov 25, 2008 4:37 PM

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

Run sql statements in PL/Sql Developer without installing Oracle database?

Hi all,
I wish to ask is there any possibility to run Run sql statements in PL/Sql Developer without installing Oracle database?
Regards.

Hello Jimmy,
this is the forum for the tool SQL Developer and, as the title says, *(Not for general SQL/PLSQL questions)*.
PL/Sql Developer is not an Oracle tool, but from allound allroundautomations.
And you need access to a database to run SQL statements. This does not need to be one installed by yourself.
Regards
Marcus

SQL 2012 Management Studio messages outcome is not in english after running any statement/command

I have recently installed SQL 2012 and by default I have selected "english" as first language. When I run any statement into SQL management studio the messages outcome shows into different language
How I can change it back to English
Example
Przetworzono: 10 procent.
Przetworzono: 20 procent.
Przetworzono: 30 procent.
Przetworzono: 40 procent.
Przetworzono: 50 procent.
Przetworzono: 60 procent.
Przetworzono: 70 procent.
Przetworzono: 80 procent.
Przetworzono: 90 procent.
Przetworzono: 100 procent.
Muhammad Mehdi

@ Sofiya
After I run command I got message
Changed language setting to us_english.
But when I try other syntax like recovery of database it is not in english
Przetworzono: 10 procent.
Przetworzono: 20 procent.
Przetworzono: 30 procent.
Przetworzono: 40 procent.
Przetworzono: 50 procent.
Przetworzono: 60 procent.
Przetworzono: 70 procent.
Przetworzono: 80 procent.
Przetworzono: 90 procent.
Przetworzono: 100 procent.
Muhammad Mehdi
Hi，
， you will have to use SET LANGUAGE to change the language in the above of syntax. If you have not installed the localized version of SQL Server, the default language is US English. I recommend you use the following stetament to check if you install
the localized version of SQL Server.
select @@language
If you need to change the default language on this machine, then you will have to change the default language for individual logins, as doing it on a server level won't work. For more ifnormation, see:http://www.sqlservercurry.com/2010/11/change-default-language-for-sql-server.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

While run "Program - Run Financial Statement Generator" occurs errors? why

while running "Program - Run Financial Statement Generator" occurs errors?
Program - Publish FSG Report
output:
The concurrent request ID of your FSG request is 309112.
The concurrent request ID of your XML Report Publisher request is 309113.
hawk_BS_IFRS PC by month (PL) (Financial Statement Generator)
can output good format xml
but
Program - Run Financial Statement Generator
the phase: Completed and
the status: Error
anybody can give me some sugguestion?

hello, I have known why.
because my xml publisher's version is 5.6.1. it's not afford it .
you can refer to metalink.
and it's not problem in 5.6

State transitions across components?

Hi,
I've been using Catalyst for a few days now to put together a "clickable mockup" of an app. Instead of working based on a comp, I'm creating the UI in Catalyst directly, using it's built-in components and creating a "wireframe" look. Works fine. I anticipate to work with more hi-fi comps.
One thing I'm having trouble with, is making deep transitions between states from subcomponents.
Imagine this setup:
The app has two states/pages, "1" and "2". Inside each page, I have one component to represent all the states of that page. So for the first page, the internal component states would be 1-1, 1-2 and 1-3. Ditto for 2.
So, now, let's say that in state 1-3, I have a button inside the component, where I want to transition to 2-2. Currently, it appears that there is no way for me to do that. When I click on the options in "Play transition to state" of the button, it shows me states 1 and 2, as well as 1-1 through 1-3, but it does not show the "child" states of "2".
Is there any way to accomplish the transition from 1-3 to 2-2?
Another version on the same problem: let's say I can somehow get from 1-3 to 2-2. Now, inside 2-2, I have a button that jumps back to "1". Currently, when I jump to "1", it jumps to whatever state 1 was in, which is 1-3 in my case, which is undesirable. It would be nice if I could somehow reset the component state on some event (showing, hiding, ...) to its default state, so that when people later jump back to it, it would start in its default state.
I am familiar with ActionScript and XML and did poke around a bit. I see that in components, there is this kind of code:
protected function Button_click_1_1():void
    mx.core.FlexGlobals.topLevelApplication.currentState='AppHome';
I speculate that this lets me do what I need by editing code, and instead of topLevelApplication.currentState using topLevelApplication.someComponent.currentState... but I wanted to see if there is/will be another friendlier way of accomplishing this?

Hi,
Just my, hopefully helpful thoughts about how to render complex state transition much easier to understand, design and debug ...............
Perhaps, initially for coders with a solid background in conditional logic, the inclusion of one or two design windows/panels providing the ability to design and display at least state transition diagrams and preferably also state transition tables, could be very helpful when trying to either design or understand complex, inter-related state transitions - actually, even relatively simple state-transitions with only five to seven objects, each with only three or four states to track concurrently, can be difficult to design, debug and test using just a mental model and memory to retain knowledge of the desired vs. actual state transition paths.
Although I say "initially for coders", many years ago I taught both of these techniques successfully during software "design principles" courses that addressed software developers who's function was to prepare "design specifications" rather than actually write the code which, in those days, was the job of programmers rather than designers. In fact many of my students were not programmers at all - for example analysts who used state transition diagramming techniques to design functions regardless of whether those functions would become implemented as code, or as a set of human actions, or mechanical machine operations (think pinball!).
It should be possible using today's technoloy to be able to
    (a) generate code from a state transition table or a state transition diagram and
    (b) generate both forms of diagram from existing code (including the code autogenerated during visual design and
    (c) consistency check existing code automatically.
It should be possible, using state transition table and diagram functions, to highlight structural logic errors. How such highlighting should be done, for example:
    (a) using a classic state transition table or diagram or
    (b) generating some form of structured text report or
    (c) inserting colour-highlighted error messages in-line in the code or
    (c) some other more visual-designer-oriented signalling technique or
    (d) a combination of several of the above
would be a design issue for Adobe. This would not be a trivial exercise for Adobe, but the functionality would be reusable, i.e. transferable into other products.
After all, the only reason for such tables or diagrams is to render complex state transitions understandable by humans, and these two techniques have proved extremely useful for many decades in many areas of design - programming, electronic circuit design, machine design, business process design......
Re. Catalys, it's just a classic program design application, with some whizzy UI graphics that need to display, disappear, change colour, glow, shimmer, move, .... in predictable and desirable ways.
The original pinball machines used mechanical relays to implement their underlying state transition diagrams; pinball designers needed to understand at least two things (a) complex state transitions and (b) a well designed UI. From this point of view, Catalyst looks like a pinball design panel!

Run Automator workflow automatically at startup?

I have a Mac Mini that I would like to have automatically run a Keynote slideshow at startup. I was able to make the workflow no problem, but I can't seem to figure out how to get it to run on startup. Is that possible? Also, can you set up a Mac to "Autostart" after a power failure?
Basically I need this Mac mini to constantly run a Slideshow as a form of "Digital Signage" all day and be able to restart itself should it loose power for a while.
Any help is greatly appreciated!
Thanks.

Hey
I want to do the same as Jessfyn (more to less)
I record an Application action and its working in the Automator,
but when I save it as an application and double click it from the desktop its not working and showing me this massage:
"The action 'watch Me Do' encountered an error.
Check the actions properties and try running the workflow again."
What am I doing wrong?
Thanks
Itamar

Current running sql statement in procedure?

How to identify the current running sql statement in procedure or package? From the v$sqlarea, i can see the only procedure name with parameters, but not current execution statement? is there any dba view to know the current execution statement in 9i & 10g ?

hi
u can also use dba_source view to know which sql statement issued by which user

Running a State Transition on Startup

Similar Messages

Maybe you are looking for