Running app doesn't display unicode chars

So far, i didn't care about character encodings. When i setup a string in java i just used my special characters, like e.g. the german umlauts:
String text = "�usserlich �berhaupt nicht sch�n."; //html: Äusserlich überhaupt nicht schön Then i changed the file encoding in my IDE (eclipse) to UTF-8. The first time i reloaded my source files, i had to replace my texts by retyping my special charaters in the source. I thought that would have been enough.
But now, such text doesn't display anymore in a Swing component like a JTextField - instead the special characters are replaced by weird (sometimes multiple) other characters.
The only workaround i've found so far is, to replace all special characters in my source code with the corresp�onding unicode code character "\uxxxx" (backslash + u + 4 chars). But then this would be a step back writing text in the source code. I thought it would be easier to use Unicode ...?

This post should be under iCloud on the Mac, not icloud.com. If any moderator can move it, that would be great.

Similar Messages

Creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn'

creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit )
don't know if it's relevant or not , I run Windows 8 64-bit

111994 please try utilizing the steps listed in App doesn’t open | Progress wheel spins continually to resolve the current error.

Verizon Messages App doesn't display incoming texts

The VERIZON MESSAGES APP doesn't display all incoming messages.
This is true for the WEB APP i use on my windows 7 PC
Iv'e tried multiple browsers and this does not help
It is also a problem with both my android tablets running the google play app from verizon
I'm not sure but, it appears that maybe this is related to ATT users.

This does NOT work on the Galaxy S3.
Airplane mode ON, Wifi ON, No network mode is available in Airplane mode. So...only wifi is available. When I try to send a text with only wifi available I get "Network not available. The message will be sent when the network is available"
BUT...On my Galaxy Tab 2 (non-verizon), This DOES work. On the tab 2 with only wifi available, I CAN send text messages using Verizon Messages.
So....again...
On Galaxy Tab 2 with only WiFi available...texting with Verizon messages DOES work.
On Galaxy S3 with only WiFi available...texting with Verizon messages DOES NOT work.
Please fix Verizon Messages to work over WiFi using Galaxy S3.
Thanks,
Abe

Display Unicode Chars in text box

This seems like it should be simple enough, but apparently, I am dense...
I want to display a Unicode char in a text box based on its hex code input. For instance, given x2190, I want to display a Left Arrow in a text box (x2190 is the code for left arrow). I tried Flatten To String function then wiring the string to a text box with Force Unicode set, but that doesnt work.
Or is there a simpler way to get non-ascii chars like arrows and such to display? Next stop is little bmps in a picture ring...ack
TIA
Bill F

did you get a chance to see the document in the below link
http://decibel.ni.com/content/docs/DOC-10153
Anil Punnam
CLD
LV 2012, TestStand 4.2..........

Displaying unicode chars in title of jdialog

hello, I am developing application that has several dialogs. For each of these dialogs, I would like to display unicode characters in the title. Can some one please help me out and direct me on what I should to do make this work? All other controls on these dialogs can display i18n text fine, except the dialogs' title and I just can't figure this out. Please help. Thanks in advance.
Max

The latest J2RE 1.4.2_03 can display Unicode characters that are not necessarily supported by your host's ANSI character set. Set the font of the frame appropriately, and give it a try with a newer VM.

Safari suddenly doesn't display Unicode characters in fields

I'm running OS 10.6.3, and I've just upgraded to Safari 4.0.4 (along with the most recent system update).
Suddenly, in the fields in many web pages, if I insert or type text in other languages, particularly Central European, Safari displays only a blank space where the foreign characters should be. This happens on some sites, but not on others. For example, in this box I can enter ř, ý or ž, and I can see them. However, on other sites (such as Google Translate), I just get those empty spaces.
This is a totally new problem on my system. I first noticed it in Firefox a couple of upgrades ago, but now the problem has started in Safari with its upgrade. I have gone into preferences and adjusted the fonts for Unicode and Central European, but it doesn't do any good.
This is a serious problem for me, because my business relies on being able to use foreign languages.
Thanks for any advice.

HI,
I've just upgraded to Safari 4.0.4
Safari's latest versoin is 4.0.5
Try deleting the Safari .plist file.
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn

Since IOS 5 iPad video app doesn't display correct art for shared videos.

Hello,
I like to watch my movies located on my mac computer over my network to my iPad. Ever since I installed IOS 5 on my iPad when browsing shared movies on iPad the artwork doesn't match the movie making it difficult to pick the correct movie. When I select a movie, then the correct movie artwork shows up before selecting play. when clicking back(Shared) button the artwork flips back to the incorrect artwork in the move list. I've tried rebooting my mac, rebooting my iPad. I even restored my iPad with no success. This problem didn't start until I installed IOS 5 on my iPad. Apple can you please fix this!!!!
Ken
[email protected]

It doesn't work.. I have already tried many ways to close the app. This is the step by step guide I have to follow every time I want to close the video app:
1. When everything doesn't react - press the lock screen button.
2. press it again (or the home button) and slide the screen to unlock.
3. Now the Application doesn't have any picture. Just a black screen, but sound is still running, and it still doesn't react when I am doing anything. Now this was the tricky part to experience, because now I simply press the home button one time and after 12-15 seconds, the application hides and I am back to home screen. (sound still playing.)
4. Open the task bar and close the app. (Sound is still playing)
5. Press lock screen button. (sound stop playing).
6. Unlock the screen and open the video app again to start over.

Photos app doesn't display shared iCloud albums

I've been using Aperture and iPhoto, and had a few shared albums on iCloud. The upgrade to Photos app didn't seem to go smoothly and I had some strange behavior and messages about connecting to iCloud when the app first launched. I don't recall what they were exactly.
Now I can't view any of the shared albums in Photos and when I try to share to them, they are not seen as options. I can still view the shared albums on my iPhone. And I was able to re-establish shared albums in Aperture. But I can't see any way to get Photos to see and display them.
I disabled and re-enabled iCloud sharing in Photos preferences, no effect. I am not using iCloud photo library and am not interested in upgrading.
I eventually logged out of iCloud and removed all its data locally and then logged in again. Everything was restored except the shared albums.
So far nothing I've tried has worked. Photos looks nice, but I can't access my shared albums.

This post should be under iCloud on the Mac, not icloud.com. If any moderator can move it, that would be great.

Windows 8.1 Photos app doesn't display photos from Home Server V1 network drive

I have my photos stored on a Home Server V1 network drive (\\homeserver\photos) and I have added the drive to the Pictures library. When I open the library in desktop Explorer I can see all the photos
and my Photos live tile shows photos from the network drive. When I open the Photos app I can see all the folders. However, when I open a folder I get the message 'There are no files or folders in this view.'
Any help is appreciated.
I am running Windows 8.1 with the latest updates.

Adding another voice to this - I hit exactly the same issue myself yesterday. I haven't got the device with me now, but as the original poster says:
I have \\server\photos mapped to my p:\ drive in Windows 8.1, and this is in my pictures library.
The p:\ drive has many (100s) subfolders, which I can browse using Windows explorer and desktop apps like Picasa.
When I start the "photos" app, I see all my folders (each with a thumbnail picture), but when I click into a folder I just get the "There are no files or folders in this view".
It's probably worth saying that as this is Home Server v1, I had a bit of fun and games to get permissions right to access the share:
I log into Windows 8.1 (on a Surface Pro 3) using my Microsoft account
I've mapped the home server photo drive to "P:\" on my SP3; when I did this I provided the admin user ID and password for the home server and told windows to remember the credentials.
I added p:\ to my pictures library in Windows 8.1 on the SP3.
FWIW - I use a similar mechanism to add music from my home server to my music library, but the XBox Music app seems to be able to see individual tracks OK.
Any ideas?

Email app doesn't display all inbox email

Hello,
I have recently changed phones, moved all the content from my old phone to the new one (same model) using Blackberry Desktop Software - all went fine.
Problem is that if I click the email icon I can't see all the messages - it only shows those that replies were sent to and doesnt display the email if its only one email sent i.e. not a thread.
Display style is set to Group by Subject. If I change it to Single Message I can see them all, but its annoying to use if I need to refer to the whole conversation.
I can go to View Folder and set to Inbox and then I DO see all my inbox messages, but if I close the app and open it again I'm back the beggining - I can only see an email if there are replies to it, not if its a single sent email.
How do I set the Inbox view as the view I get after opening the email app? It used to be like that on my old phone so I know it is doable - though I dont remember having to set it up. It just displayed everyting correctly.
I simply used to be the same view as on the computer. Inbox as the main view, conversation combined by the Subject, once clicked on I get all the emails in the conversation displaying one after another, clickable to open.
I loved the blackberry due the fact how easily I could handle my work email, now it became much more fiddly.
Heeeeeeelp?
UPDATE:
What I havent tried before posting whats above is back the blackberry content up and restore it again. I have absolutely not idea why it worked (since it should have copied the wrong settings) but it DID.

"Group by Subject" was what I was referring to. Sometimes it's called Conversation style.
Glad you got it fixed.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Windows apps doesn't display properly

Hello I am having a problem with windows apps. It only shows a part of the app. For example my Mail app in an email it only shows part of the message the rest of the message is beyond of the screen but I don't horizontal or vertical scroll.
I hope I made myself kind of clear.
Thank you for all your help

Hi,
A screen shot would be better for understanding.
Meanwhile, have you tried to test this issue using another user account or create a new user account?
Clear windows store cache by running wsreset.exe or reinstall the graphic card drivers, restart pc, chekc the result.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Upgrade on Gnome 2.24 - Remember Running Apps doesn't work

Hello,
since years I use the feature in Gnome to save what applications were running the last time and where the windows of the applicatons were placed and so on. This feature is still included in 2.24 and as far as I know it works via Metacity, but since the upgrade it doesn't work.
The only hint is this warning at startup of X11 (I don't use GDM):
Any idea what I can change?
Thanks Hoschi
Last edited by hoschi (2008-11-06 19:57:46)

for other notification to work like mounts, network connections, volume keys, bat status you need gnome-power-manager-notify-osd and gnome-settings-daemon-notify-osd
regards

Code compiles, runs but doesn't display anything, not even Exceptions?

The title just about says it all, but I don't even get a window, why is this? If it's some exception then it's not displaying for me to diagnose. Some pointers in what might be wrong would be really appreciated here - I'm pretty new to Java 3D.
* Test.java
* PrTestf of concept - this class draws a 3D wire-frame model of a BattleZone tank
* @author Mark2
* Created on 10 September 2006, 18:59
package BattleZone;
import java.awt.*;
import java.awt.event.*;
import com.sun.j3d.utils.applet.MainFrame;
import com.sun.j3d.utils.universe.*;
import com.sun.j3d.utils.geometry.*;
import javax.media.j3d.*;
import javax.vecmath.*;
public class Test extends CloseableFrame
public static View myView = new View();
public static GeometryInfo gi;
GraphicsConfiguration config = SimpleUniverse.getPreferredConfiguration();
public Canvas3D canvas3D = new Canvas3D(config);
public SimpleUniverse simpleU = new SimpleUniverse(canvas3D);
public void Test()
    CloseableFrame frame = new CloseableFrame("Proof of Concept");
    setVisible(true);
    MakeUniverse();
    constructView();
public static void main(String args[])
   new Test();
public SimpleUniverse MakeUniverse()
    ViewPlatform myViewPlatform = new ViewPlatform();
    myView.attachViewPlatform(myViewPlatform);
    BranchGroup contentBranchGroup = new BranchGroup();
    simpleU.addBranchGraph(contentBranchGroup);
    simpleU.getViewingPlatform().setNominalViewingTransform();
    MakeSceneGraph();
    return simpleU;
public BranchGroup MakeSceneGraph()
    BranchGroup scene = new BranchGroup();
    populateGraph(simpleU, scene);
    return scene;
private View constructView()
    myView.addCanvas3D(canvas3D);        //NullPointerException
    myView.setPhysicalBody(new PhysicalBody());
    myView.setPhysicalEnvironment(new PhysicalEnvironment());
    return myView;
public static BranchGroup populateGraph(SimpleUniverse simpleU, BranchGroup scene)
    simpleU.addBranchGraph(scene);
    Read_In_Tank_Data();
    return scene;
    public static void Read_In_Tank_Data()
    float[] data = new float[13*3];
    int [] stripCount = {6,7};
    int i = 0;
    //          X               Y                   Z   for each point in the polygon
                                   //Draw near view first
    data[i++]= -1.0f; data[i++]= -1.0f; data[i++]= 0.0f;    //1     Back right corner of base
    data[i++]= -1.5f; data[i++]= -0.5f; data[i++]= 0.0f;
    data[i++]= -1.0f; data[i++]= 0.0f; data[i++]= 0.0f;
    data[i++]= +2.0f; data[i++]= 0.0f; data[i++]= 0.0f;     //Draws base
    data[i++]= +3.0f; data[i++]= -0.5f; data[i++]= 0.0f;     //Forward most point
    data[i++]= +2.5f; data[i++]= -1.0f; data[i++]= 0.0f;     //6
    data[i++]= -1.0f; data[i++]= 0.0f; data[i++]= 0.0f;     //Draw top and turret
    data[i++]= 0.0f; data[i++]= +1.0f; data[i++]= 0.0f;     //Highest point - Antanae array on top of here
    data[i++]= +0.5f; data[i++]= +0.75f; data[i++]= 0.0f;
    data[i++]= -+2.0f; data[i++]= +0.75f; data[i++]= 0.0f;     //10
    data[i++]= +2.0f; data[i++]= +0.5f; data[i++]= 0.0f;
    data[i++]= +1.0f; data[i++]= +0.5f; data[i++]= 0.0f;
    data[i++]= +2.0f; data[i++]= 0.0f; data[i++]= 0.0f;     //13
                                   //Draws far view same as front but with -1 Z values
    data[i++]= -1.0f; data[i++]= -1.0f; data[i++]= -1.0f;         //Back left corner of base
    data[i++]= -1.5f; data[i++]= -0.5f; data[i++]= -1.0f;     //15
    data[i++]= -1.0f; data[i++]= 0.0f; data[i++]= -1.0f;
    data[i++]= +2.0f; data[i++]= 0.0f; data[i++]= -1.0f;     //Draws base
    data[i++]= +3.0f; data[i++]= -0.5f; data[i++]= -1.0f;     //Forward most point
    data[i++]= +2.5f; data[i++]= -1.0f; data[i++]= -1.0f;
    data[i++]= -1.0f; data[i++]= 0.0f; data[i++]= -1.0f;     //20      Draw top and turret
    data[i++]= 0.0f; data[i++]= +1.0f; data[i++]= -1.0f;     //Highest point - Antanae array on top of here
    data[i++]= +0.5f; data[i++]= +0.75f; data[i++]= -1.0f;
    data[i++]= -+2.0f; data[i++]= +0.75f; data[i++]= -1.0f;
    data[i++]= +2.0f; data[i++]= +0.5f; data[i++]= -1.0f;
    data[i++]= +1.0f; data[i++]= +0.5f; data[i++]= -1.0f;     //25
    data[i++]= +2.0f; data[i++]= 0.0f; data[i++]= -1.0f;     //26
    //Need some connecting lines to make a whole object.
    GeometryInfo gi = new GeometryInfo(GeometryInfo.POLYGON_ARRAY);
    gi.setCoordinates(data);
    gi.setStripCounts(stripCount);
    NormalGenerator ng = new NormalGenerator();
    ng.generateNormals(gi);
    gi.recomputeIndices();
    Stripifier st = new Stripifier();
    st.stripify(gi);
    gi.recomputeIndices();
    createWireFrameAppearance();
public static Appearance createWireFrameAppearance()
    Appearance materialAppear = new Appearance();
    PolygonAttributes polyAttrib = new PolygonAttributes();
    polyAttrib.setPolygonMode(PolygonAttributes.POLYGON_LINE);
    materialAppear.setPolygonAttributes(polyAttrib);
    return materialAppear;
}

Its because your public void Test() should be public Test(). Its a constructor, not a method.

Preview app doesn't display hyperlinks

PDFs when opened in Apple's Preview App do not work with hyperlinks (including mailto:s). We've tried with various work flows from both windows apps, Apple's 'print pdf', Acrobat Pro. Other apps work fine: e.g. Adobe Reader, Safari.
I'm surprised not to see more discussion about this, is it a well known issue?
CM

Hyperlinks in PDFs that I create in Adobe InDesign work fine in Preview, assuming they were actually created as hyperlinks (versus text strings even with link-like formatting).
Some other apps try harder to interpret text strings as hyperlinks than Preview does.

Type Show Hidden Characters doesn't display hidden chars, what to do?

When I select Type > Show Hidden characters, the display does not change and the hidden characters stay hidden. Is there something additional that I need to do to see the hidden characters?

Under View, change your Screen Mode to Normal. In any other mode, guides and hidden characters won't show.

Running app doesn't display unicode chars

Similar Messages

Maybe you are looking for