Running without a monitor

I have an 18 month old Pavillion desktop which I now want to use just as a printer / scanner server, but when I boot it without a monitor attached, it defaults to VGA mode and refuses to let me increase the resolution (I am connecting to it using TeamViewer which I use often and I know is not causing the issue).
I thought it might be possible to use a dummy plug to fool the video card into thinking that there is a monitor attached, but apparently that will not work because the AMD Radeon HD 6530D video card only outputs a digital signal (DVI-D plugs only) so there are no analog outputs to fool with resistors (i.e. dummy plug).
Is there ANY way to force this @!#$% card to allow full resolution without a monitor physically connected?

Hello,
Do you have the latest driver version installed?
I will check if there is anyhting else that you can do or try to get that one.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

Error when run without admin rights

I created a program that need to be run on a companies computers, the people who will run it can't have admin rights, however, if the program is run without admin rights all it does is create an error txt file, with the following:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x03109c30, pid=3852, tid=3896
# Java VM: Java HotSpot(TM) Client VM (1.5.0_08-b03 mixed mode, sharing)
# Problematic frame:
# C [GrFinger.dll+0x79c30]
--------------- T H R E A D ---------------
Current thread (0x00a6fdc0): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
siginfo: ExceptionCode=0xc0000005, writing address 0x00000004
Registers:
EAX=0x03114a90, EBX=0x00000003, ECX=0x00000000, EDX=0x00000000
ESP=0x02faf7c8, EBP=0x02faf82c, ESI=0x058c9ac0, EDI=0x058b0bb0
EIP=0x03109c30, EFLAGS=0x00010206
Top of Stack: (sp=0x02faf7c8)
0x02faf7c8: 0309515b 058b0bdc 030941fb 058b0bb0
0x02faf7d8: 00a6fdc0 26acc138 058b0bb0 02fafb64
0x02faf7e8: 0310b658 00000000 030939e8 26acc138
0x02faf7f8: 03093e61 00000001 10001236 00a7832f
0x02faf808: 00a6fe80 02faf83c 02faf810 26acc138
0x02faf818: 02faf83c 26acd468 00000000 26acc138
0x02faf828: 02faf83c 02faf85c 00a72a8f 00000000
0x02faf838: 00a76509 22a76ed8 02faf840 26aca43b
Instructions: (pc=0x03109c30)
0x03109c20: 8b 41 08 50 ff 15 90 d0 10 03 c3 cc cc cc cc cc
0x03109c30: c6 41 04 01 c3 cc cc cc cc cc cc cc cc cc cc cc
Stack: [0x02f70000,0x02fb0000), sp=0x02faf7c8, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [GrFinger.dll+0x79c30]
j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
j salvationarmy.TemplateList.setup()V+198
j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
j salvationarmy.LoginProgram.<init>()V+87
j salvationarmy.LoginProgram$20.run()V+4
j java.awt.event.InvocationEvent.dispatch()V+47
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
V [jvm.dll+0x86e84]
V [jvm.dll+0xddead]
V [jvm.dll+0x86d55]
V [jvm.dll+0x86ab2]
V [jvm.dll+0xa16b2]
V [jvm.dll+0x10f4ac]
V [jvm.dll+0x10f47a]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb683]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.griaule.grFinger.GrFingerNative.GrCapFinalize_native()I+0
j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
j salvationarmy.TemplateList.setup()V+198
j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
j salvationarmy.LoginProgram.<init>()V+87
j salvationarmy.LoginProgram$20.run()V+4
j java.awt.event.InvocationEvent.dispatch()V+47
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02cb9850 JavaThread "Thread-3" [_thread_in_native, id=3916]
0x02c48748 JavaThread "Timer-0" [_thread_blocked, id=3908]
0x02c41d98 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3912]
0x00355ed0 JavaThread "DestroyJavaVM" [_thread_blocked, id=3836]
=>0x00a6fdc0 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
0x00a6e9b8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3892]
0x00a6e4c8 JavaThread "AWT-Shutdown" [_thread_blocked, id=3888]
0x00a0b048 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3884]
0x00a09cc0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3876]
0x00a08f78 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3872]
0x00a03ff8 JavaThread "Finalizer" daemon [_thread_blocked, id=3864]
0x0035fb30 JavaThread "Reference Handler" daemon [_thread_blocked, id=3868]
Other Threads:
0x009d8a08 VMThread [id=3856]
0x00a0c390 WatcherThread [id=3880]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 323K [0x22a70000, 0x22b10000, 0x22f50000)
eden space 512K, 50% used [0x22a70000, 0x22ab0f08, 0x22af0000)
from space 64K, 99% used [0x22b00000, 0x22b0fff8, 0x22b10000)
to space 64K, 0% used [0x22af0000, 0x22af0000, 0x22b00000)
tenured generation total 1408K, used 836K [0x22f50000, 0x230b0000, 0x26a70000)
the space 1408K, 59% used [0x22f50000, 0x23021100, 0x23021200, 0x230b0000)
compacting perm gen total 8192K, used 821K [0x26a70000, 0x27270000, 0x2aa70000)
the space 8192K, 10% used [0x26a70000, 0x26b3d748, 0x26b3d800, 0x27270000)
ro space 8192K, 63% used [0x2aa70000, 0x2af7d608, 0x2af7d800, 0x2b270000)
rw space 12288K, 46% used [0x2b270000, 0x2b810608, 0x2b810800, 0x2be70000)
Dynamic libraries:
0x00400000 - 0x0040d000      C:\Program Files\Java\jre1.5.0_08\bin\javaw.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
0x6d6c0000 - 0x6d85b000      C:\Program Files\Java\jre1.5.0_08\bin\client\jvm.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\Java\jre1.5.0_08\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d690000 - 0x6d69c000      C:\Program Files\Java\jre1.5.0_08\bin\verify.dll
0x6d300000 - 0x6d31d000      C:\Program Files\Java\jre1.5.0_08\bin\java.dll
0x6d6b0000 - 0x6d6bf000      C:\Program Files\Java\jre1.5.0_08\bin\zip.dll
0x6d000000 - 0x6d169000      C:\Program Files\Java\jre1.5.0_08\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
0x6d240000 - 0x6d27f000      C:\Program Files\Java\jre1.5.0_08\bin\fontmanager.dll
0x7c9c0000 - 0x7d1d5000      C:\WINDOWS\system32\shell32.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x5d090000 - 0x5d127000      C:\WINDOWS\system32\comctl32.dll
0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_08\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_08\bin\nio.dll
0x10000000 - 0x1000e000      C:\Program Files\Griaule\GrFinger 4.1 FREE\bin\GrFingerJava.dll
0x03090000 - 0x03697000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\GrFinger.dll
0x76780000 - 0x76789000      C:\WINDOWS\system32\SHFOLDER.dll
0x036a0000 - 0x036bd000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFpFns.dll
0x036c0000 - 0x036ca000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevDat.dll
0x036d0000 - 0x036f6000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevClt.dll
0x77120000 - 0x771ac000      C:\WINDOWS\system32\OLEAUT32.dll
0x03700000 - 0x03775000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFtrEx.dll
0x03780000 - 0x037de000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpMatch.dll
0x03810000 - 0x03917000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\BioNetAcsDLL.dll
0x03920000 - 0x0396d000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\USB4XX.DLL
0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
0x77920000 - 0x77a13000      C:\WINDOWS\system32\SETUPAPI.dll
0x037e0000 - 0x037f5000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\pthreadVC2.dll
0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
0x6d370000 - 0x6d37d000      C:\Program Files\Java\jre1.5.0_08\bin\JdbcOdbc.dll
0x74320000 - 0x7435d000      C:\WINDOWS\system32\ODBC32.dll
0x763b0000 - 0x763f9000      C:\WINDOWS\system32\comdlg32.dll
0x20000000 - 0x20017000      C:\WINDOWS\system32\odbcint.dll
0x4dd40000 - 0x4dd84000      C:\WINDOWS\system32\odbcjt32.dll
0x1b000000 - 0x1b170000      C:\WINDOWS\system32\msjet40.dll
0x1b5d0000 - 0x1b665000      C:\WINDOWS\system32\mswstr10.dll
0x5d130000 - 0x5d13e000      C:\WINDOWS\system32\odbcji32.dll
0x1b2c0000 - 0x1b2cd000      C:\WINDOWS\system32\msjter40.dll
0x1b2d0000 - 0x1b2f6000      C:\WINDOWS\system32\MSJINT40.DLL
0x5fe80000 - 0x5fe9b000      C:\WINDOWS\system32\odbccp32.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x76fd0000 - 0x7704f000      C:\WINDOWS\system32\CLBCATQ.DLL
0x77050000 - 0x77115000      C:\WINDOWS\system32\COMRes.dll
0x1b810000 - 0x1b84a000      C:\WINDOWS\system32\msjtes40.dll
0x0f9a0000 - 0x0f9ab000      C:\WINDOWS\system32\VBAJET32.DLL
0x0f9c0000 - 0x0fa22000      C:\WINDOWS\system32\expsrv.dll
0x0cd90000 - 0x0cda1000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\fplib.dll
0x76c30000 - 0x76c5e000      C:\WINDOWS\system32\WINTRUST.dll
0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
0x76c90000 - 0x76cb8000      C:\WINDOWS\system32\IMAGEHLP.dll
0x0cec0000 - 0x0ceed000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\extdllR.dll
0x0d000000 - 0x0d03a000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\vrfdllR.dll
VM Arguments:
java_command: C:\Community Center\SalvationArmy.jar
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\Griaule\GRFING~1.1FR\bin
USERNAME=mackd
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 (cores per cpu 1, threads per core 2) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ht
Memory: 4k page, physical 514792k(227580k free), swap 1255496k(937260k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_08-b03) for windows-x86, built on Jul 26 2006 01:10:50 by "java_re" with MS VC++ 6.0
Help!
GrFinger is an SDK put out by Grauile (or something like that) just seach grfinger in google, you'll find it.
Thanks

Don't you think you should really contact Grauile ?
They wrote the software, including the native DLL libraries, and probably encountered this problem before on dual processor machines.

How do I build an application that will run without being installed?

I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
Thanks

Under what operating system was it running under back in the 90's when it was working?
I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
Just some food for thought, do not know if it applies to your situation.
Good Luck
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

HP Envy H9 1335 i5 can it run with 6 monitors?????

I currently run HP envy H9 1335 with three monitor, Can I upgrade six monitor output on this PC? what's do I need to make this pc run with 6 monitors without any problem?
Thank
Phil

Hi Phil,
This VisionTek AMD 7870 supports 6 monitors. Check directly with VisionTeck if you have any further questions about this video card. This VisionTek is another possibility.
Review this posted article on: Guide for Selecting a Discrete Video Card
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

JMF Application that runs without selection.

What do I need to make a JMF Application that runs without selecting a media file from a directrey.
I wish to have a folder of avi's that can be played the moment the player is activated. Auto play without selection from within the PC that it's running from. No applet.
Thankyou

viafax999 wrote:
Why would you use a flakey app to replace a built in windows function that works fine?
Turn on remote desktop sharing undr computer properties and run mstsc on the machine with kb, mouse and monitor to control the other pc's via rdp
Synergy isn't that flakey. It just doesn't get along well with one particularly old program I use that access an online database via FTP. When the FTP transfer is running, Synergy stops. As soon as the transfer is done, it comes back. Not even a minor annoyance for me.
Synergy is not a remote desktop sharing function. It is simply a keyboard and mouse sharing function like the old keyboard/mouse switch boxes.
I've two computers on my desk; a work laptop and a home desktop. Each has their own keyboards and screens. With Synergy, I can use one keyboard and mouse to control both machines. I simply move the mouse from one screen to another and control follows. It's just like moving a mouse between multiple monitors on a single machine, except that I'm actually switching between computers.
I thought Windows remote desktop functions are for just that - remote access to a machine where keyboard, mouse and screen are duplicated on the client. If I'm missing something, please educate. Also consider if it'll work with Windows7 Home Premium.
Synergy is also cross platform, so when I fire up a Linux machine I sometimes use, it too can share the same keyboard and mouse.
Thanks.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

HT3986 How do I run an external monitor on a macbook pro running windows 7

How do I run an external monitor on a Macbook Pro running Windows 7

on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
windows like osx saw the external monitor and let me clone to it or extend my desktop to it

MRP run without one storage location

Dear All,
My client's requirement is they need to run MRP on plant level without considering one storage location stock
e.g if a material is having stock of 10 in unrestricted with storage location 1104. Now when mrp is run for 100 quantity planned order is created for 90 only planning strategy is 40....they want the MRP should not consider the stock in storage location 1104.....how this can be made possibe?
Please Suggest...
Regards,
Pawan Shetty

Dear all,
Pl. help me which user exit implemented for MRP RUN without Storage location ,b'coz. from slandered setting we are not able to do the same
Regards
Sandeep

REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.

Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi.

How do i stop two processes that are running in activity monitor

how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

Select each one and Force Quit it.
But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
regards

How can I run a vga monitor and projector together on my Mac Pro 15"??

How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

IMac 27" late 2013 run an external monitor at 4K on 60Hz?

Hey,
Not entirely sure if it is possible to do either on OSx or on a Windows Bootcamp, but is it possible to run an
external monitor at 4K at 60Hz? The graphics chip is a GT 755M but I cannot find any information regarding this matter.
Any pointers would be great thanks.

Hello JHyde01,
Thanks for using Apple Support Communities.
If you want to use a 4K display with your Mac, the displays are limited to a Maximum of 50Hz on one specific model as shown below.
You can use 4K displays and Ultra HD TVs at the following resolutions and refresh rates via the built-in HDMI port.
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
With OS X Mavericks v10.9.3 or later, the following DisplayPort displays are supported at their default using single-stream transport (SST) at 30Hz.
Sharp PN-K321
ASUS PQ321Q
Dell UP2414Q
Dell UP3214Q
Panasonic TC-L65WT600
With OS X Yosemite, you can use all of the above displays as well as the following:
LG 31MU97 4K display (at 30Hz or 50Hz)
Other Mac models do support MST displays at 60Hz as shown below.
MacBook Pro (Retina, 15-inch, Late 2013, Mac Pro (Late 2013), and iMac (Retina 5K, 27-inch, Late 2014) computers also support multi-stream transport (MST) displays at 60 Hz. If you use a 60Hz MST display with the MacBook Pro (Retina, 15-inch, Late 2013) or iMac (Retina 5K, 27-inch, Late 2014), only one additional Thunderbolt display can be supported.
Using 4K displays and Ultra HD TVs with Mac computers - Apple Support
Take care,
Alex H.

How do i run 2 external monitors on my mac book pro?

so im trying to run 2 external monitors off my mac book pro and was wondering how and the best way to do it?

Matrox.com has a device for that.

Trying to run 2 external monitors with HDMI splitter

I'm trying to run two external monitors from my iMac using an HDMI splitter but I can only get signal to one. I've read a lot of forums saying it is not possible to run two monitors from an iMac but the two monitors can be mirrored, in fact, I would be prefer it if they were.
I've got the mini-DVI to HDMI cable running to an HDMI splitter, one end going to my 52'' Sharp Aquos tv and the other to my 21" BenQ monitor in the kitchen.
I would just like to be able to have both monitors playing the same video at the sametime, I don't understand why this would not be possible.
I'm at work so I don't have the exact specifications but I recently purchased my iMac and have the i7 processor and the Radeon 5750 graphics card so I know it's not a hardware limitation
What am I doing wrong?

I will reply to my own question just because I figured out the answer.
The Larger display has to be set to the maximum settings of the smaller display
For example: My sharp aquos has to be set to 720p BEFORE plugging in the BenQ which will not do 1080p
If you try to plug in the benQ before setting the Aquos to 720p, it will not work and you will not be able to change it after the fact.
May seem simple now, but boy did that drive me crazy for a while.

X230 and running 2 external monitors

Hello,
I was wondering if anyone could let me know if its possible to run 2 external monitors on the Lenovo x230.
[MONITOR 1] [laptop screen] [MONITOR 2]
MONITOR 1= connecting via mini display port to HDMI >> to monitor
MONITOR 1= connecting via VGA >> to monitor
I tried the above but I cant get it working on all 3 only - the 1 external 1 laptop screen works
Does anyone know if the X230 grahics card was designed to handle that?
Thanks
Solved!
Go to Solution.

You need a series 3 dock with 2 DP/DVI to be able to handle 2 external LCD in addition to the internal LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Running without a monitor

Similar Messages

Maybe you are looking for