Runtime error 10401 with CWAOPoint1 control

I am trying to run an older application and it fails with Runtime error 10401...the specified device is not a NI product... I am trying to run this on a laptop that does not have the hardware.  How can I get around this error so I can step through my code (VB6)?  I have the both the latest DAQMX and traditional Nidaq software installed as well as Measurement Studio 8 installed.

The following is the subroutine used.  Its giving the error on the SingleWrite commands. VB does not report any references missing in the project.
Sub cmdSetLEDVoltages_Click(Index As Integer)
    Select Case Index
        Case 0
            CWAOPoint1.ChannelString = "1"
            CWAOPoint1.SingleWrite cwnGlareLEDVoltage(Index).Value
            CWAOPoint1.ChannelString = "0"
            CWAOPoint1.SingleWrite cwnRefLEDVoltage(Index).Value
        Case 1
            CWAOPoint2.ChannelString = "1"
            CWAOPoint2.SingleWrite cwnRefLEDVoltage(Index).Value
            CWAOPoint2.ChannelString = "0"
            CWAOPoint2.SingleWrite cwnGlareLEDVoltage(Index).Value
    End Select
End Sub

Similar Messages

  • How to troubleshoot runtime error (termination with short dump)

    hi all,
    i'm new comer on crm. and i got a problem when i accessed tx: segment builder (runtime error: termination with short dump).
    i've tried to troubleshoot this problem by set the java2 SDK GUI path on the client side.but it still didn't work.then i tried to activate the automation trace (just perform the procedure which wrote down on error analysis), but i confused when tried to read the trace file and still didn't get the point. FYI, i 'm using sap logon 710 and SAP crm 5.0.
    what i've should to do?
    should i have to re install my sap logon?
    i really need ur assistance!
    best regards,  
    agung

    Hi Agung,
    Please refer the following SAP Note for your information:
    <b>SAP Note: 990263</b>
    Best Regards,
    Johnny.
    Reward with points if it helps.

  • BAPI Runtime Error DBIF_RSQL_INVALID_REQUEST with module "KONV_BEARBEITEN"

    Hi Experts
    I am trying to create a sales order using BAPI FM BAPI_SALESORDER_CREATEFROMDAT1. After executing the program it shows in output screen that the sales order created and also displays the newly created sales order number. But when I want to check the order from VA03 it shows Express document "Update was terminated" received by author AAA, where AAA is login name.
    I also analysis the sort dump for which the update process was terminated. I give the error details
    Runtime Errors         DBIF_RSQL_INVALID_REQUES
    Error analysis
        An invalid request was made to the SAP database interface in a statement
         in which the table "KONV " was accessed.
    Below are the module name and report from where the error is coming.
    Function Module name  RV_SALES_DOCUMENT_ADD
    Program Name  SAPLV45U
    Include  LV45UF0K
    Row  26
    Source code from Rruntime Error
      Line  SourceCde
    1 *****************************************************************
        2 *  Unterroutinen RV-Auftragsabwicklung alphabetisch sortiert:
        3 *  ----------------------------------------------------------
        4 *  Buchstabe K:
        5 *
        6 *****************************************************************
        7
        8 *----------------------------------------------------------------
        9 *       FORM KONV_BEARBEITEN
       10 *----------------------------------------------------------------
       11 FORM KONV_BEARBEITEN.
       12
       13   CHECK: FKONV_GEAENDERT NE SPACE OR
       14          VORGANG = CHARH.
       15
       16   IF VORGANG NE 'H'.
       17     DELETE FROM KONV WHERE KNUMV = VBAK-KNUMV.
       18 ENHANCEMENT-POINT KONV_BEARBEITEN_10 SPOTS ES_SAPLV45U.
       19   ENDIF.
       20
       21   LOOP AT FXKOMV.
       22     FXKOMV-MANDT = VBAK-MANDT.
       23     FXKOMV-KNUMV = VBAK-KNUMV.
       24     MODIFY FXKOMV.
       25   ENDLOOP.
    >>>>>   INSERT KONV FROM TABLE FXKOMV.
       27   IF SY-SUBRC NE 0.
       28     MESSAGE A100 WITH
       29   ENDIF.
       30
       31 ENHANCEMENT-POINT KONV
       32 ENDFORM.
       33 *eject
    Below is my source code.
    *& Report  Z_BAPI_SALESORDER
    REPORT  z_bapi_salesorder.
    * Sales document type
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
    PARAMETERS: p_auart TYPE auart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Sales organization
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
    PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Distribution channel
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
    PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Division.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
    PARAMETERS: p_spart TYPE spart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    * Sold-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
    PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Ship-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
    PARAMETERS: p_ship  TYPE kunnr.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    * Material
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
    PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Quantity.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
    PARAMETERS: p_menge TYPE dzmengc  OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Plant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
    PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    * Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapiitemin  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapireturn1    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapisdhedu
                             WITH HEADER LINE.
    * Initialization.
    INITIALIZATION.
      v_text   = 'Order type'.
      v_text1  = 'Sales Org'.
      v_text2  = 'Distribution channel'.
      v_text3  = 'Division'.
      v_text4  = 'Sold-to'.
      v_text5  = 'Ship-to'.
      v_text6  = 'Material'.
      v_text7  = 'Quantity'.
      v_text9  = 'Plant'.
    * Start-of-selection.
    START-OF-SELECTION.
    * Header data
    * Sales document type
      header-doc_type = p_auart.
      headerx-doc_type = 'X'.
    * Sales organization
      header-sales_org = p_vkorg.
      headerx-sales_org = 'X'.
    * Distribution channel
      header-distr_chan  = p_vtweg.
      headerx-distr_chan = 'X'.
    * Division
      header-division = p_spart.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    * Partner data
    * Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = p_sold.
      APPEND partner.
    * Ship to
      partner-partn_role = 'WB'.
      partner-partn_numb = p_ship.
      APPEND partner.
    * ITEM DATA
      itemx-updateflag = 'I'.
    * Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    * Material
      item-material = p_matnr.
      itemx-material = 'X'.
    * Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    * Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
      APPEND item.
      APPEND itemx.
    *   Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
    *   Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
        EXPORTING
          order_header_in           = header
    *     WITHOUT_COMMIT            = ' '
    *     CONVERT_PARVW_AUART       = ' '
       IMPORTING
         salesdocument              = v_vbeln
    *     SOLD_TO_PARTY             =
    *     SHIP_TO_PARTY             =
    *     BILLING_PARTY             =
    *     RETURN                    =
        TABLES
          order_items_in            = item
          order_partners            = partner
    *     ORDER_ITEMS_OUT           =
    *     ORDER_CFGS_REF            =
    *     ORDER_CFGS_INST           =
    *     ORDER_CFGS_PART_OF        =
    *     ORDER_CFGS_VALUE          =
    *     ORDER_CCARD               =
    *     ORDER_CFGS_BLOB           =
         order_schedule_ex          = lt_schedules_in
    * Check the return table.
      IF v_vbeln <> space.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ELSE.
        WRITE: / 'Error in creating document'.
      ENDIF.
    I am unable to trace the exact reason. Please help and thanks in advance.
    Edited by: Joy Banerjee on Oct 12, 2009 7:47 AM

    Hi Prashant,
    Set the profile parameter abap/buffersize value to maximum.Get the virtual memory increased.
    If it doesn't work, see in transaction db02 if there is sufficient tablespace.
    Let me knoe the status of tablespaces.
    Regards,
    Sabita

  • Runtime error/s with iOS

    I've followed the build instructions for iOS in your documentation but I get an error at runtime with the following output:
    Detected an attempt to call a symbol in system libraries that is not present on the iPhone:
    stat$INODE64 called from function __os_exists in image Berkeley.
    An Apple forum member suggested that I'm not building BDB against the iPhone Simulator system libraries. I have a few questions:
    In your build instructions for iOS you refer to an $SDKROOT variable. What should this be set to for Simulator and device builds respectively?
    I found a SO post from someone who suggests that I'd need quite extensive modification of my build script to set environment variables not mentioned in your build instructions. You can see his build script in the second answer in the following link to SO:
    objective c - How can I use the Berkeley DB within an iOS application? - Stack Overflow
    If I make use of his script, I get an error that tells me gcc isn't working correctly. His post is quite old, so I'm really hoping you can elaborate on your existing guidance for iOS builds that will help me get BDB working at runtime. Just to note, following your build instructions does lead to a successful build of BDB but it fails at runtime.
    Any help at all would be great, thanks.

    Hi Ray,
    Could you try building the BDB library using the following configuration:
    export DEVROOT=/Applications/Xcode.app/Contents/Developer
    export SDKROOT=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.1.sdk
    export SIMROOT=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator7.1.sdk
    export CC=$DEVROOT/usr/bin/gcc
    export LD=$DEVROOT/usr/bin/ld
    export CXX=$DEVROOT/usr/bin/g++
    export LDFLAGS="-L$SDKROOT/usr/lib"
    export CFLAGS="-arch i386 -pipe -no-cpp-precomp -isysroot $SDKROOT -mios-simulator-version-min=7.1"
    export CXXFLAGS="-arch i386 -pipe -no-cpp-precomp -isysroot $SDKROOT -mios-simulator-version-min=7.1"
    export CPPFLAGS="-arch i386 -pipe -no-cpp-precomp -isysroot $SDKROOT -mios-simulator-version-min=7.1"
    ../dist/configure --host=arm-apple-darwin9 --prefix=$SDKROOT \
      --enable-sql --enable-debug --enable-cxx --enable-sql_compat
    With the BDB library built with this configuration, we couldn't reproduce the runtime error you mentioned in your original post on iOS simulator 7.1.

  • Runtime Error SYNTAX_ERROR with MIGO tcode

    Hi Gurus,
    I got a new issue now. while executing MIGO tcode getting SYNTAX_ERROR dump, please check below dump details..
    Category               ABAP Programming Error
    Runtime Errors         SYNTAX_ERROR
    ABAP Program           SAPLVBDOCUBATCH_DM
    Application Component  LO-BM
    Date and Time          09.01.2012 16:27:51
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLMIGO" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLVBDOCUBATCH_DM " in include
         "LVBDOCUBATCH_DM$39 " in
        line 8:
        ""RL034" must be a flat structure. You cannot use internal tables, stri"
        "ngs, references, or structures as components."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLMIGO" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLVBDOCUBATCH_DM :
        ""RL034" must be a flat structure. You cannot use internal tables, stri"
        "ngs, references, or structures as components."
    i have tried to check syntax of program SAPLVBDOCUBATCH_DM and it is giving error, please help me solve this issue.
    Additional Information:ECC6.0 EHP5(recently upgraded from ECC6.0) nd DB:Oracle 10.2.0.2 OS:windows
    Thanks,
    Venkat

    Hello Team,
    This is Solved..
    As per dump when we go n check table RL034 through SE11 there one Object type is wrong so with Abaper help it got corrected then the problem was solved.
    Thanks all for your time.
    Venkat

  • Windows client  gives runtime error R6034 with TMMONITOR=app,svc,tran,sys::

    PLEASE REFER TO THE DUPLICATE POSTING IN THE "TUXEDO" FORUM FOR AN ANSWER TO THIS QUESTION.
    Hi,
    I'm testing TSAM on a Windows system. If I run without setting the TMMONITOR environmental variable set everything works fine, but when I set TMMONITOR=app,svc,tran,sys:: both the client and server programs give the runtime error R6034: "An application has made an attempt to load the C runtime library incorrectly". Clicking the "OK" button lets the programs continue, but the following messages appear in the ULOG:
    142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: GP_CAT:1345: ERROR: pif: can't load 'libmonplugin.dll'
    142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: GP_CAT:1341: ERROR: pif: can't load impl 'bea/performance/mongui' that is in InterceptorSequence for 'bea/performance/monfan'
    142539.868.TUXMODEL!tuxmodelclient.5996.5860.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
    142547.342.TUXMODEL!TuxModelServer.3220.728.0: GP_CAT:1345: ERROR: pif: can't load 'libmonplugin.dll'
    142547.342.TUXMODEL!TuxModelServer.3220.728.0: GP_CAT:1341: ERROR: pif: can't load impl 'bea/performance/mongui' that is in InterceptorSequence for 'bea/performance/monfan'
    142547.342.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
    142547.482.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
    142547.498.TUXMODEL!TuxModelServer.3220.728.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
    142547.498.TUXMODEL!tuxmodelclient.5996.5860.0: LIBTUX_CAT:6623: ERROR: TMMONITOR failed to invoke the monitoring plug-in
    Can anyone tell me what I need to do to overcome this problem? (I'm running Tuxedo Version 10.0 with VS2005, 32-bit, Patch Level (none) and TSAM version 1.1. Both programs were compiled with buildclient/buildserver, using Microsoft Visual C++ Express Edition 2008 (Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86)
    Thanks & kind regards,
    Malcolm.
    Edited by: Malcolm Freeman on Oct 28, 2008 11:55 AM

    As I know, the runtime rrror R6034 can be caused by Windows, not caused by TSAM, you need check your Windows system.
    guggi

  • Runtime Error: CONVT_NO_NUMBER with MM01 BDC

    Hi All,
    I am creating Material Master using Call transaction Method for MM01 Tcode.
    I am passing the value called Standard Price (MBEW-STPRS) in the BDC.
    Standard price will be like 100.00 (Hundred Rupees)
    While passing this value, I am getting Runtime Error with the following details.
    Runtime Error: CONVT_NO_NUMBER
    Unable to interpret "/" as a number.
    258 ----
    259 *        Insert field                                                  *
    260 ----
    261 FORM BDC_FIELD USING FNAM FVAL.
    >>>   IF FVAL <> NODATA.
    263     CLEAR BDCDATA.
    264     BDCDATA-FNAM = FNAM.
    265     BDCDATA-FVAL = FVAL.
    266     APPEND BDCDATA.
    267   ENDIF.
    268 ENDFORM.
    How to resolve this type of error???
    Regards
    Pavan

    I have defined field STPRS as char(13 length) in the internal table as char.
    The field NODATA is having value ' \ ' in the debugging mode.
    The code mentioned in my above post is from the standard perform statement.
    Even if i provide value as "100" in the flat file, while reaching the statment
    perform bdc_field       using 'MBEW-STPRS'
    it_mm01-stprs.
    it shows as "100.00" in the debugger.
    Any idea....????
    Regards
    Pavan

  • Reader XI error 507 with browser control in VB6

    I have a VB 6 application that has an embedded browser control.  We are in the process of upgrading to Windows 7.  If Reader X (10.1.4) is installed, the PDF (which is viewed through an ActiveX control) displays fine.  If Reader XI (11.0.1) is installed, I get the "There is a problem with Adobe Acrobat/Reader.  If it is running, please exit and try again. (103:103)".  I also get an error code of 1014:1014 (which goes away if I open Reader XI and accept the EULA), and 507:507.
    Our security group will most likely insist on Reader XI, so figuring this out is a priority.  Any help/advice would be very much appreciated.
    Thanks,
    G. Harland

    This question might have a better chance of being answered if posted in one of the development forums such as: http://forums.adobe.com/community/design_development/pdf_workflow

  • Error -10401 with pcie 6321

    Hello,
    I have the -10401 error when I want to configure a port in 6321 PCIe card (3 ports of 8 bits each).
    I use the sub-vi "DIO-configure a port."
    I checked all the settings.
    I also tested the sub-vi "Read a digital line" and i have the same error.
    The PC which used for my tests is on Windows XP and using LabVIEW 2010 SP1 and NI DAQ  MX 9.3.5 (supplied with the PCIe 6321).
    Sincerely,
    Solved!
    Go to Solution.

    Thank-you for the quick response but it's not possible to use the traditional DAQ driver instead?
    I have to resume some vi's from an old project without modify them.

  • HT1751 Hi I am unable to open my iTunes at all. A box stating "Runtime Error appears with Program C:/Program Files (x86) iTunes/iTunes R6034 shows up, please help

    I am unable to open my iTunes. A box appears "Run time Error" Program C:/Program Files (x86) iTunes/iTunes
    Please help me

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Popup error message with enabling control to other tabs

    Hi All,
              My Requirement is to pop up an error message when the user tries to delete a particular value in a tab.
             i know only a normal error message statement, which doesn't allow the control to proceed further when that error message triggers..
             help me to code an error message/popup which should allow control to proceed further for the user to undergo other changes other than the specified tab.

    Hi ,
    try this way..
    data : w_answer(1)        TYPE c 
    CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          titlebar      = 'Interface Screen'
          text_question = w_title
          text_button_1 = 'Yes'
          icon_button_1 = 'ICON_OKAY'
          text_button_2 = 'No'
          icon_button_2 = 'ICON_BREAKPOINT'
        IMPORTING
          answer        = w_answer.
    IF w_answer = '1'.
    "alllow to save this means not changes happen
    ELSEIF w_answer = 'A'.
          EXIT.        "exit this will not allow to save
    ENDIF.
    "at the time of deleting chcek whether the w_amswer is A , it means there is error after correcting clear answer and allow hime to save
    Prabhudas

  • I am getting a runtime error r6034 with CS6 onloading.

    How do I resolve it?

    Thanks for coming back so quickly. The programme was working fine until I messed up copying plugins into the Plug in directory. I lost confidence and then uninstalled Photoshop, but inadvertently reloaded beta version of CS6. I then unistalled that and then downloaded and installed a new version from the Creative Cloud, and now need to press the OK button 21 times whenever I load up PS.
    I am running windows 7 and PScs6 64bit.
    Following your reply, I have tried what you suggested but it did not change anything.
    Have you any further suggestions?

  • TS3212 an error of Runtime error r6034, with a message like "An application has made an attempt to load the C runtime library incorrectly. Please contact the applications' support team for more

    i have DL the Latest Itunes on my PC which was working fine til i did the itunes updated version and now i am getting this message and also something about not starting my iphone or ipad devices or something similir. Can anone please help me, i also did recieve a message stating that i had a MSVCR80.dll corrupt i actually had to remove itunes from my PC because there were to many things poping up after the Update. Can someone please help me.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
    (99096)

  • Regarding runtime error DBIF_RSQL_SQL_ERROR and exception CX_SY_OPEN_SQL_DB

    Hi All,
    I am loading a COPA cube from a DSO.
    There are about 15million records to be loaded. every time i try loading the data, 1 or 2 Data packages gets stuck and finally it leads to a runtime error DBIF_RSQL_SQL_ERROR with exception CX_SY_OPEN_SQL_DB.
    When i checked in SM21 transaction code, i got the following message
    10:41:52 BTC  018 500 AMRUKV                     BY  O Deadlock occurred
    10:41:53 BTC  018 500 AMRUKV                     BY  4 Database error 60 at INS access to table /BIC/FCSDV
    10:41:53 BTC  018 500 AMRUKV                     BY  0 > ORA-00060: deadlock detected while waiting for resource
    10:41:54 BTC  018 500 AMRUKV                     AB  0 Run-time error "DBIF_RSQL_SQL_ERROR" occurred
    10:41:58 BTC  018 500 AMRUKV                     AB  1 > Short dump "080818 104154 s0173bel PB100 " generated
    10:41:58 BTC  018 500 AMRUKV                     D0  1 Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20080818104154s0173bel_PB1_00 AMRUKV 500 )
    In transaction code ST22 i got the following message:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          18.08.2008 10:41:54
    Short text
         SQL error in the database when accessing a table.
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
          in  procedure "WRITE_ICFACT" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         The database system recognized that your last operation on the database
         would have led to a deadlock.
         Therefore, your transaction was rolled back
         to avoid this.
         ORACLE always terminates any transaction that would result in deadlock.
         The other transactions involved in this potential deadlock
         are not affected by the termination.
    How to correct the error
        Database error text........: "ORA-00060: deadlock detected while waiting for
         resource"
        Internal call code.........: "[RSQL/INSR//BIC/FCSDVD_C02 ]"
        Please check the entries in the system log (Transaction SM21).
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
        "GPD3UMZD6V4YAKZAIWAOCYLV07Y" or "GPD3UMZD6V4YAKZAIWAOCYLV07Y"
        "WRITE_ICFACT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.
        The exception must either be prevented, caught within proedure
        "WRITE_ICFACT" "(FORM)", or its possible occurrence must be declared in the
        RAISING clause of the procedure.
        To prevent the exception, note the following:
    Can anybody suggest on what can be done?
    Thanks in Advance,
    Regards
    A.T

    Hi ,
    This is a table space issue....
    u will be getting a Dump...as DBIF_RSQL_SQL_ERROR check in ST22. in this DUMP if u scroll down u will find the table for which this is failing. Actually this is like some of the table related to the DSO is not having sufficient space to cary out the transaction. hence it is failing.
    U can also see in DB02--> Deadlock....u will see that there is a deadlock for this table. So find the table from ST22 and ask ur basis team to increase the space for this table....
    This can be solved only by increasing the space of the table...no other solution....ask help from ur basis team.
    Thanks
    Sandeep

  • Can't get the latest itunes update to download on my windows7 laptop. It gives runtime error window then error 7, windows error 114, any ideas

    First thing to say is I'm new at trying to slove my own computer issues, so I may be a little slow. The latest iTunes update will not install on my Windows 7 labtop,   I keep getting a runtime error window with Error 7 and Windows eror 1114. I have run a fix and reload the file with no resuts and can't seem to get it do download manually either, any ideas for this computer challanged person?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

Maybe you are looking for