Runtime error in distribution FM 'CVV5_EVENT_START_DISTRIBUTION'

Dear All,
I am facing an issue in document distribution. Business scenario: PR is created with a doument. PR goes through a release strategy which is designed through a Workflow. When PR is finally approved, Documnet distribution happens. Business object DRAW is called with event CHANGED and hence this FM CVV5_EVENT_START_DISTRIBUTION is called. However this results in a runtime error due to exception 'NO_RELATION_EXIST'. I am not able to debug and find if any necessary parameter is getting missed and i do not have too much information on DMS.
Can somebody guide me in resolving this issue. If any other information is needed then please post it.
Thanking you in advance.
Regards,
Saud

Thnaks a lot. That note is explicitly for this problem. I will take it forward now. Will revert back in case of any issue. Thanks again.
Regards,
Saud

Similar Messages

BAPI Runtime Error DBIF_RSQL_INVALID_REQUEST with module "KONV_BEARBEITEN"

Hi Experts
I am trying to create a sales order using BAPI FM BAPI_SALESORDER_CREATEFROMDAT1. After executing the program it shows in output screen that the sales order created and also displays the newly created sales order number. But when I want to check the order from VA03 it shows Express document "Update was terminated" received by author AAA, where AAA is login name.
I also analysis the sort dump for which the update process was terminated. I give the error details
Runtime Errors         DBIF_RSQL_INVALID_REQUES
Error analysis
    An invalid request was made to the SAP database interface in a statement
     in which the table "KONV " was accessed.
Below are the module name and report from where the error is coming.
Function Module name RV_SALES_DOCUMENT_ADD
Program Name SAPLV45U
Include LV45UF0K
Row 26
Source code from Rruntime Error
Line SourceCde
1 *****************************************************************
    2 * Unterroutinen RV-Auftragsabwicklung alphabetisch sortiert:
    3 * ----------------------------------------------------------
    4 * Buchstabe K:
    5 *
    6 *****************************************************************
    7
    8 *----------------------------------------------------------------
    9 *       FORM KONV_BEARBEITEN
   10 *----------------------------------------------------------------
   11 FORM KONV_BEARBEITEN.
   12
   13   CHECK: FKONV_GEAENDERT NE SPACE OR
   14          VORGANG = CHARH.
   15
   16   IF VORGANG NE 'H'.
   17     DELETE FROM KONV WHERE KNUMV = VBAK-KNUMV.
   18 ENHANCEMENT-POINT KONV_BEARBEITEN_10 SPOTS ES_SAPLV45U.
   19   ENDIF.
   20
   21   LOOP AT FXKOMV.
   22     FXKOMV-MANDT = VBAK-MANDT.
   23     FXKOMV-KNUMV = VBAK-KNUMV.
   24     MODIFY FXKOMV.
   25   ENDLOOP.
>>>>>   INSERT KONV FROM TABLE FXKOMV.
   27   IF SY-SUBRC NE 0.
   28     MESSAGE A100 WITH
   29   ENDIF.
   30
   31 ENHANCEMENT-POINT KONV
   32 ENDFORM.
   33 *eject
Below is my source code.
*& Report Z_BAPI_SALESORDER
REPORT z_bapi_salesorder.
* Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
* Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr.
SELECTION-SCREEN END OF LINE.
SKIP 1.
* Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE dzmengc OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
* Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapiitemin OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapireturn1    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapisdhedu
                         WITH HEADER LINE.
* Initialization.
INITIALIZATION.
v_text   = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
* Start-of-selection.
START-OF-SELECTION.
* Header data
* Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
* Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
* Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
* Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
* Partner data
* Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
* Ship to
partner-partn_role = 'WB'.
partner-partn_numb = p_ship.
APPEND partner.
* ITEM DATA
itemx-updateflag = 'I'.
* Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
* Material
item-material = p_matnr.
itemx-material = 'X'.
* Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
* Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
*   Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
*   Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
    EXPORTING
      order_header_in           = header
*     WITHOUT_COMMIT            = ' '
*     CONVERT_PARVW_AUART       = ' '
   IMPORTING
     salesdocument              = v_vbeln
*     SOLD_TO_PARTY             =
*     SHIP_TO_PARTY             =
*     BILLING_PARTY             =
*     RETURN                    =
    TABLES
      order_items_in            = item
      order_partners            = partner
*     ORDER_ITEMS_OUT           =
*     ORDER_CFGS_REF            =
*     ORDER_CFGS_INST           =
*     ORDER_CFGS_PART_OF        =
*     ORDER_CFGS_VALUE          =
*     ORDER_CCARD               =
*     ORDER_CFGS_BLOB           =
     order_schedule_ex          = lt_schedules_in
* Check the return table.
IF v_vbeln <> space.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', v_vbeln, ' created'.
ELSE.
    WRITE: / 'Error in creating document'.
ENDIF.
I am unable to trace the exact reason. Please help and thanks in advance.
Edited by: Joy Banerjee on Oct 12, 2009 7:47 AM

Hi Prashant,
Set the profile parameter abap/buffersize value to maximum.Get the virtual memory increased.
If it doesn't work, see in transaction db02 if there is sufficient tablespace.
Let me knoe the status of tablespaces.
Regards,
Sabita

Java runtime error while executing install.sh - installing Oracle Clinical 4i

Hello DBA's
1. I am trying to install an Oracle App on a SUN SPARC 20 with 256 MB / 9.1
GB. (solaris 8)
2. I installed Oracle 8i EE completely and created the DB using Oracle
Universal Installer. So the Java components and runtime were also installed
I presume. I have it in /usr/java1.2 with links made during install.
3. Did post installation according to the manual.
4. Did pre-installation for install of Oracle Clinical application.
5. Put the OC CD into the drive and typed install.sh as requested.
Error: The Java Runtime environment was not found at
.. /../stage/Components/oracle.swd.jre/1.1.8.10/1/Datafiles/Expanded/solaris/bin/
jre Hence the universal installer cannot be run.
I am struggling for 2 months now and I am hoping that some guru will wipe
out the frustration and anxiety that has made my hair grey. I have also
included the contents of the oraparam.ini for Oracle 8i and Oracle CLinical.
They look almost the same but for some reason, the Oracle Universal
installer does not seem to work for the Oracle Clinical installation.
What could be the reason for this Jav runtime Error. I check the web and
other sites, but no conceivable answer. I have no access to Metalink. What
do I have to do to make the universal installer work.
Your help is really really appreciated.
============================================================
ORAPARAM.ini used when installing Oracle 8i 8.1.6.2
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.jar
JRE_LOCATION=../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expande
d/jre
OUI_LOCATION=../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expa
nded
HLP_LOCATION=
EWT_LOCATION=
DEFAULT_HOME_LOCATION=
NLS_ENABLED=FALSE
NO_BROWSE=/net
JRE_MEMORY_OPTIONS=-mx48m
[IMAGES]
FILE1=images/o8i_1.gif
FILE2=images/o8i_2.gif
FILE3=images/o8i_3.gif
FILE4=images/o8i_4.gif
FILE5=images/o8i_5.gif
FILE6=images/o8i_6.gif
FILE7=images/o8i_7.gif
FILE8=images/o8i_8.gif
===========================================================
ORAPARAM.ini used when installing Oracle Clinical 4i
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../../stage/products.jar
LICENSE_LOCATION=
JRE_LOCATION=../../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expa
nded
/jre
OUI_LOCATION=../../stage/Components/oracle.swd.oui/1.7.0.19.0/1/DataFiles/Ex
panded
JRE_MEMORY_OPTIONS=" -mx32m"
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=OUIHome
NO_BROWSE=/net
HLP_LOCATION=
EWT_LOCATION=
NLS_ENABLED=TRUE
BOOTSTRAP=FALSE
OUI_VERSION=1.7.0.19.0
[IMAGES]
FILE1=images/installAd0.gif
FILE2=images/installAd1.gif
=========================================================

Hi
May be you can check the Redhat FTP site.
CentOS 4.6, 32-bit
http://isoredirect.centos.org/centos/4.6/isos/i386/
CentOS 4.6, 64-bit
http://isoredirect.centos.org/centos/4.6/isos/x86_64/
CentOS 5.1, 32-bit
http://isoredirect.centos.org/centos/5.1/isos/i386/
CentOS 5.1, 64-bit
http://isoredirect.centos.org/centos/5.1/isos/x86_64/
Regards
Mudhalvan M.M

Runtime Errors TIME_OUT

guyz,
i am facing the below issue while running DTP to load the master data attr to info object.
previoulsy it was working perfect but from last few days its getting hanged and throwing this error.
also records are very few around 2500.
dont know why its getting hanged.
Runtime Errors         TIME_OUT
Date and Time          10/04/2011 16:35:09
Short text
     Time limit exceeded.
What happened?
     The program "SAPLSENA" has exceeded the maximum permitted runtime without
     interruption and has therefore been terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     After a specific time, the program is terminated to make the work area
     available to other users who may be waiting.
     This is to prevent a work area being blocked unnecessarily long by, for
     example:
     - Endless loops (DO, WHILE, ...),
     - Database accesses with a large result set
     - Database accesses without a suitable index (full table scan)
     The maximum runtime of a program is limited by the system profile
     parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
      time limit is
     exceeded, the system attempts to cancel any running SQL statement or
     signals the ABAP processor to stop the running program. Then the system
     waits another 60 seconds maximum. If the program is then still active,
     the work process is restarted.
How to correct the error
    Programs with long runtime should generally be started as background
    jobs. If this is not possible, you can increase the system profile
    parameter "rdisp/max_wprun_time".
    Depending on the cause of the error, you may have to take one of the
    following measures:
    - Endless loop: Correct program;
    - Dataset resulting from database access is too large:
      Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
      (for example);
    - Database has unsuitable index: Check index generation.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TIME_OUT" " "
    "SAPLSENA" or "LSENAF01"
    "FLUSH_PACKAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
also sometimes when i try to refresh the requests in the manage option of the info object, it doesnt show the previous requests and throws the message
Refresh of the display terminated because InfoCube/DSO cannot be locked
Message no. RSM854
Diagnosis
InfoProvider 0PROD_CATEG cannot be locked with lock argument RSICCONT.
System Response
The display is not refreshed and contains old or incorrect data, that can come from other InfoProviders.
Procedure
Check why the sm12 lock is not yet released on the table RSICCONT; Where necessary delete the lock.
With reproduction of an unauthorized lock, write a message to SAP.
please guide.
cheerz,
raps.

Dear Raps,
The program SAPLSENA is the lock handler tool. It is doing
enqueue/dequeue operations.
The error should come from the program created running in this dialog
process and calls the SAPLSENA program to create the lock.
The problem actually occurs because an application program commits many
separate calls of DEQUEUE function modules, and thus causes the
dispatcher queue in the enqueue dispatcher to overflow. Such an
application program always causes a performance problem. DEQUEUE calls
are started asynchronously, that is, they normally do not give a
response, and the calling program continues without waiting time.
If an overflow of the ENQ dispatcher queue occurs in this case, locks
are kept forever, and processes that are waiting for an enqueue
response, will keep hanging.
Please kindly refer to some notes for more information.
653996     Analyzing lock situations
142054     Processes in status stopped ENQ
97760      Enqueue: Performance and resource consuption
74141      Resource Management for tRFC and aRFC
39412      How many work processes to configure
Please check as well attached note 74141 for RFC load distribution.
Regards,
arvind

Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03

Hello everyone,
I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Due to the error, we changed the settlement rule following these directions:
1. Remove the settlement rules that we had so we can start anew.
2. Choose the first line item and click on "Final Settlement".
3. Enter the necessary settlement details (total should equal to 90,000 only).
4. Go back and save.
5. Choose the second line item and click on "Final Settlement".
6. Enter the necessary settlement details (total should equal to 30,000).
7. Go back and save.
8. Then, check again the distribution rules set.
Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
Thanks in advance.
Best regards,
Peter

hi,
check in SAP OSS with the message number you get is there any SAP Notes tobe applied.

Runtime Error on Acrobat.exe.

I am using Acrobat Professional version 8 on XP SP3. It had always worked in the past but now, after opening, I get a Runtime error when trying to make a new PDF.
Event Viewer gives:
"Faulting application acrobat.exe, version 8.1.0.137, faulting module adobeupdater.dll, version 5.0.0.316, fault address 0x000475a3."
I have run the Repair in the installer from the original distribution disk to no effect. This was after a system reboot and with nothing else started. The system runs Trend for security, which had not fully started either when I tried to re-run the program. I jave also run repair from the Help menu in the application itself, with a reboot afterward. There have been no significant changes made to the system, except possibly automatic updates, since it was working fine. It even crashes when I try to get the versionn number form the Help-About menu selection.

I would suggest going to Help>Repair. Then doing Help>Update to get the updates current. Hopefully that will resolve the problem. When you do a repair from the original CD, you may lose updates.

Runtime error alv list report out put

Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          03.03.2014 13:11:56
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to access an unassigned field symbol
(data segment 93).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
(data segment 93).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "CFLDEV01"
Database type..... "ORACLE"
Database name..... "CD1"
Database user ID.. "SAPSR3"
Terminal.......... "CFINWL0115"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Apr 2 2011 01:40:22"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.4.0) "
Patch level. 137
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 701
Operating system..... "HP-UX B.11"
Memory consumption
    Roll.... 16192
    EM...... 20949200
    Heap.... 0
    Page.... 122880
    MM Used. 3677872
    MM Free. 509344
User and Transaction
    Client.............. 200
    User................ "GUEST"
    Language key........ "E"
    Transaction......... "SE38 "
    Transactions ID..... "5311AF68E99111BDE1000000C009C834"
    Program............. "SAPLKKBL"
    Screen.............. "SAPLKKBL 0500"
    Screen line......... 3
Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
    The main program was "ZTEST_11 ".
    In the source code you have the termination point in line 2844
    of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2814       gs_sfc97 = gs_out_fieldcat.
2815     when 98.
2816       assign component gs_out_fieldcat-fieldname
2817              of structure t_outtab_slave to <fs98>.
2818       gs_sfc98 = gs_out_fieldcat.
2819     when 99.
2820       assign component gs_out_fieldcat-fieldname
2821              of structure t_outtab_slave to <fs99>.
2822       gs_sfc99 = gs_out_fieldcat.
2823   endcase.
2824 endform.                    "field_assign_hier_slave
2825 *---------------------------------------------------------------------*
2826 *       FORM GEN_FIELD_OUT2                                           *
2827 *---------------------------------------------------------------------*
2828 *       ........                                                      *
2829 *---------------------------------------------------------------------*
2830 form gen_field_out2.
2831   field-symbols <l_initial>.
2832
2833   case gs_out-field_colcount.
2834     when 001.
2835       if gs_out_flags-slave ne 'X'.
2836         assign <fm01> to <field>.
2837         gs_fc = gs_mfc01.
2838       else.
2839         assign <fs01> to <field>.
2840         gs_fc = gs_sfc01.
2841       endif.
2842     when 002.
2843       if gs_out_flags-slave ne 'X'.
>>>>>         assign <fm02> to <field>.
2845         gs_fc = gs_mfc02.
2846       else.
2847         assign <fs02> to <field>.
2848         gs_fc = gs_sfc02.
2849       endif.
2850     when 003.
2851       if gs_out_flags-slave ne 'X'.
2852         assign <fm03> to <field>.
2853         gs_fc = gs_mfc03.
2854       else.
2855         assign <fs03> to <field>.
2856         gs_fc = gs_sfc03.
2857       endif.
2858     when 004.
2859       if gs_out_flags-slave ne 'X'.
2860         assign <fm04> to <field>.
2861         gs_fc = gs_mfc04.
2862       else.
2863         assign <fs04> to <field>.
Contents of system fields
Name     Val.
Name     Val.
SY-SUBRC 4
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 80
SY-LSIND 0
SY-PAGNO 1
SY-LINNO 4
SY-COLNO 13
SY-PFKEY STANDARD
SY-UCOMM
SY-TITLE Sales nformation
SY-MSGTY I
SY-MSGID SF
SY-MSGNO 616
SY-MSGV1 ZTEST_11
SY-MSGV2 RE
SY-MSGV3 EN
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140303
SY-UZEIT 131156
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
   10 FORM         SAPLKKBL                            LKKBLF99                             2844
      GEN_FIELD_OUT2
    9 FORM         SAPLKKBL                            LKKBLF99                              797
      GEN_LINE_OUT
    8 FORM         SAPLKKBL                            LKKBLF98                             1359
      DATA_OUT_SIMPLE
    7 FORM         SAPLKKBL                            LKKBLF01                              457
      LIST_OUTPUT_NEW
    6 FORM         SAPLKKBL                            LKKBLF01                             6205
      FIRST_LIST_DISPLAY
    5 MODULE (PBO) SAPLKKBL                            LKKBLO01                               11
      LIST_DISPLAY
    4 FUNCTION     SAPLKKBL                            LKKBLU01                              441
      K_KKB_LIST_DISPLAY
    3 FUNCTION     SAPLSALV                            LSALVU07                              504
      REUSE_ALV_LIST_DISPLAY
    2 FORM         ZTEST_11                            ZTEST_11                              181
      DISPLAY
    1 EVENT        ZTEST_11                            ZTEST_11                              103
      START-OF-SELECTION
Chosen variables
Name
Val.
      10 Ty.          FORM
e GEN_FIELD_OUT2
SFC22
0000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000
0000222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000
OUT-FIELD_COLCOUNT
2
0000
0002
UMMY$$
0000
0000
2222
0000
REPID
SAPLKKBL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454444422222222222222222222222222222222
310CBB2C00000000000000000000000000000000
OUT_FLAGS-SLAVE
0
   0
   2
   0
PACE
   0
   0
   2
   0
FM01>
   0000
   0000
   2222
   0000
FIELD>
   0000
   0000
   2222
   0000
S_FC
   ####BSARK                         1
   0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
   0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
   0000454542222222222222222222222222322222222222222222222222222222222222222222222222222222222222
   01012312B0000000000000000000000000100000000000000000000000000000000000000000000000000000000000
S_MFC01
   ####BSARK                         1
   0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

this is a report n im getiing runtime error Runtime Errors         GETWA_NOT_ASSIGNED   give the solution
TABLES : VBAK , VBAP , KNA1.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_VBAP,
         matnr   type    matnr,
         vbeln   type    vbeln,      " order no
         ARKTX   type    ARKTX,      "item name
         KWMENG type    KWMENG,     " order qua.
         audat   type    audat,      " SD document item date (incoming or outgoing date)
         posnr   type    posnr,
         END OF TY_VBAP.
TYPES : BEGIN OF TY_KNA1,
         NAME1 TYPE NAME1,
*        KUNNR TYPE KUNNR,
         END OF TY_KNA1.
TYPES : BEGIN OF TY_VBAK,
         VTWEG   type   VTWEG,   " Distribution Channel
         BSARK   type   BSARK,   "Customer purchase order type
         END OF TY_VBAK.
TYPES : BEGIN OF TY_FINAL,
         matnr   type    VBAP-matnr,
         vbeln   type    VBAP-vbeln,      " order no
         ARKTX   type    VBAP-ARKTX,      "item name
         KWMENG type    VBAP-KWMENG,     " order qua.
         audat   type    VBAP-audat,      " SD document item date (incoming or outgoing date)
         posnr   type    VBAP-posnr,
         VTWEG   type    VBAK-VTWEG,   " Distribution Channel
         BSARK   type    VBAK-BSARK,   "Customer purchase order type
         NAME1   TYPE    KNA1-NAME1,
*        KUNNR   TYPE    KNA1-KUNNR,
         END OF TY_FINAL.
DATA : IT_VBAP TYPE TABLE OF TY_VBAP,
        IT_VBAK TYPE TABLE OF TY_VBAK,
        IT_KNA1 TYPE TABLE OF TY_KNA1,
        IT_FINAL1 TYPE TABLE OF TY_FINAL,
        IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_VBAP LIKE LINE OF IT_VBAP,
        WA_VBAK LIKE LINE OF IT_VBAK,
        WA_KNA1 LIKE LINE OF IT_KNA1,
        WA_FINAL LIKE LINE OF IT_FINAL1,
        WA_FIELDCAT TYPE          SLIS_FIELDCAT_ALV.
INITIALIZATION.
SELECTION-SCREEN BEGIN OF BLOCK BL WITH FRAME TITLE TEXT-001.
     SELECT-OPTIONS :
                     SO_NO     FOR VBAP-VBELN,
                     M_NO      FOR VBAP-MATNR,
                     SO_DATE   FOR VBAP-AUDAT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BL.
     START-OF-SELECTION.
     SELECT VBELN MATNR AUDAT ARKTX KWMENG POSNR
        FROM VBAP INTO CORRESPONDING FIELDS OF TABLE IT_FINAL1 WHERE VBELN IN SO_NO
                                                                 AND MATNR IN M_NO
                                                                 AND AUDAT IN SO_DATE.
       SELECT NAME1 FROM KNA1 INTO CORRESPONDING FIELDS OF TABLE IT_FINAL1 .
       LOOP AT IT_FINAL1 INTO WA_FINAL.
         SELECT SINGLE name1 FROM kna1 INTO WA_FINAL-name1 WHERE KUNNR = WA_FINAL-name1.
           MODIFY IT_FINAL1 FROM WA_FINAL TRANSPORTING NAME1.
       ENDLOOP.
SELECT VTWEG BSARK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE IT_FINAL1.
*      SELECT VTWEG BSARK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE IT_VBAK
*                         FOR ALL ENTRIES IN IT_FINAL1
*                         WHERE VTWEG = IT_FINAL1-VTWEG
*                         AND   BSARK = IT_FINAL1-BSARK.
       LOOP AT IT_FINAL1 INTO WA_FINAL.
         READ TABLE IT_VBAK INTO WA_VBAK WITH KEY VTWEG = WA_FINAL-VTWEG.
         READ TABLE IT_VBAK INTO WA_VBAK WITH KEY BSARK = WA_FINAL-BSARK.
         IF SY-SUBRC EQ 0.
           WA_FINAL-VTWEG = WA_VBAK-VTWEG.
           WA_FINAL-BSARK = WA_VBAK-BSARK.
         ENDIF.
               MODIFY IT_FINAL1 FROM WA_FINAL TRANSPORTING VTWEG BSARK.
         ENDLOOP.
         PERFORM BUILD.
         PERFORM DISPLAY.
*&      Form BUILD
*       text
* --> p1        text
* <-- p2        text
form BUILD .
*CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-FIELDNAME = 'BSARK'.
WA_FIELDCAT-SELTEXT_L = 'Order type'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-FIELDNAME = 'AUFNR'.
WA_FIELDCAT-SELTEXT_L = 'Order number'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-SELTEXT_L = 'Line No.'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '4'.
WA_FIELDCAT-FIELDNAME = 'VTWEG'.
WA_FIELDCAT-SELTEXT_L = 'Dis Channel'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '5'.
WA_FIELDCAT-FIELDNAME = 'audat'.
WA_FIELDCAT-SELTEXT_L = 'Order Date'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '6'.
WA_FIELDCAT-FIELDNAME = 'audat'.
WA_FIELDCAT-SELTEXT_L = 'delivey date'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '7'.
WA_FIELDCAT-FIELDNAME = 'name1'.
WA_FIELDCAT-SELTEXT_L = 'Name'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '8'.
WA_FIELDCAT-FIELDNAME = 'ARKTX'.
WA_FIELDCAT-SELTEXT_L = 'Iem Name'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = '9'.
WA_FIELDCAT-FIELDNAME = 'KWMENG'.
WA_FIELDCAT-SELTEXT_L = 'Order quantitye'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
endform.                    " BUILD
*&      Form DISPLAY
*       text
* --> p1        text
* <-- p2        text
form DISPLAY .
   CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK              = ' '
*     I_BYPASSING_BUFFER             =
*     I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = sy-repid
*     I_CALLBACK_PF_STATUS_SET       = ' '
*     I_CALLBACK_USER_COMMAND        = ' '
*     I_STRUCTURE_NAME               =
*     IS_LAYOUT                      =
      IT_FIELDCAT                    = IT_FIELDCAT[]
*     IT_EXCLUDING                   =
*     IT_SPECIAL_GROUPS              =
*     IT_SORT                        =
*     IT_FILTER                      =
*     IS_SEL_HIDE                    =
*     I_DEFAULT                      = 'X'
*     I_SAVE                         = ' '
*     IS_VARIANT                     =
*     IT_EVENTS                      =
*     IT_EVENT_EXIT                  =
*     IS_PRINT                       =
*     IS_REPREP_ID                   =
*     I_SCREEN_START_COLUMN          = 0
*     I_SCREEN_START_LINE            = 0
*     I_SCREEN_END_COLUMN            = 0
*     I_SCREEN_END_LINE              = 0
*     IR_SALV_LIST_ADAPTER           =
*     IT_EXCEPT_QINFO                =
*     I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER        =
*     ES_EXIT_CAUSED_BY_USER         =
     TABLES
       t_outtab                       = IT_FINAL1.
*   EXCEPTIONS
*     PROGRAM_ERROR                  = 1
*     OTHERS                         = 2
   IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
endform.                    " DISPLAY

VISUAL C++ RUNTIME ERROR

I have a Lawson LBI portal that users run crystal reports in. The only thing on that server is the LBI.
intermittently the users will run a report and then the LBI doesnt work. check the server we have a VISUAL C++ RUNTIME ERROR VISUAL DEBUG STUDIO. We then have to reboot the server.
any ideas what would be causing this, or a fix?

Hi Sharon,
Not much info to go on so SAP takes no responsibility for this. You should really check with Lawson. The message indicates you need to update the C++ distribution files/packages on that server which has nothing to do with CR.
Use Google search for that error ( microsoft c++ redistribution package ) and you'll find more info on how to and what to but again, SAP takes no responsibilities, you really need to discuss with Lawson.
Thanks again
Don

When i am posting the Outbound delivery,here getting Runtime error

Hello
         When i am posting the Outbound delivery,here getting Runtime error
This is error analysis report
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Please give me solution for this

HI,
Probable some missing customising for SAP Global Trade Services - Plug-In.
Check with your functional consultant if the configuration is correct.
Check in SPRO.
Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
Regards,
Ankur Parab

Link error for distribution

Hi, I received an email with the link to download the new version of flash player for distribution, but does not work
Dear Miguel Ángel Abarca,
Thank you for submitting a request to distribute Adobe® Software. Your request has been approved, and you may now distribute the Adobe® Software listed below, subject to the terms and conditions set forth in the Adobe Reader and Runtime Software Distribution License Agreement.
Approved Software:
Adobe® Flash® Player
Adobe® Reader® Software
Attached is an Adobe Portable Document Format (PDF) file of the distribution license agreement. Please keep this file for your records. The agreement is valid for one year, after that one year you can renew the distribution license agreement by following the same process.
Below you will find the necessary details and download links for the product(s) that you have been approved.
Adobe® Flash® Player
To download the Flash Player version that you would like to distribute, please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=<number>

Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835>

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

Runtime error in distribution FM 'CVV5_EVENT_START_DISTRIBUTION'

Similar Messages

Maybe you are looking for