Runtime Error on call CBIH_IA02_LIST_DISPLAY
Hello Experts!
Can you please give me an example how to call this
FM -> CBIH_IA02_LIST_DISPLAY ?
I get the message:
In the function module interface, you can specify only
fields of a specific type and length under "X_IOTAB".
Although the currently specified field
"LG_IOTAB" is the correct type, its length is incorrect.
CALL FUNCTION 'CBIH_IA02_LIST_DISPLAY'
* EXPORTING
* I_PF_STATUS_FUNC = 'CBIH_IA02_SET_PF_ST'
* I_USER_COMMAND_FUNC = 'CBIH_IA02_USER_COMM'
* I_LAYOUT_CHANGE_FUNC = 'CBIH_IA02_LAY_SET'
* I_MASTERSTRUCT_NAME = 'CCIHS_IAHITM'
* I_SLAVESTRUCT_NAME = 'CCIHS_IAHITS'
TABLES
x_iotab = LG_IOTAB
i_ipiotab = LG_IPIOTAB
i_ipevaiotab = LG_IPEVA_IOTAB
e_mastertab = LG_MASTERTAB
e_slavetab = LG_SLAVETAB
* EXCEPTIONS
* NO_IALID = 1
* MASTER_SLAVE_ERROR = 2
* LIST_DISPL_ERROR = 3
* OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
No problem !
Here my declarations:
TYPES: IORECORD_TYPE LIKE RCGPHIOT. " RCGRRISIOT.
DATA: LG_IOTAB TYPE IORECORD_TYPE OCCURS 1000
WITH HEADER LINE.
DATA: LG_IPIOTAB LIKE CCIHS_IPIOT OCCURS 1000 WITH HEADER LINE.
DATA: LG_IPEVA_IOTAB LIKE CCIHS_IPEVAIOT OCCURS 1000 WITH HEADER LINE.
DATA: LG_MASTERTAB LIKE CCIHS_IAHITM OCCURS 1000 WITH HEADER LINE.
DATA: LG_SLAVETAB LIKE CCIHS_IAHITS OCCURS 1000 WITH HEADER LINE.
parameters pa type ccihs_ialhiot-iatype.
select * from cciht_ial into
corresponding fields of table l_api_header_tab
where iatype = pa .
READ table l_api_header_tab INTO l_api_header_wa INDEX 1.
*LOOP AT l_api_header_tab INTO l_api_header_wa.
move-corresponding l_api_header_wa to LG_IOTAB .
append LG_IOTAB .
*ENDLOOP.
CALL FUNCTION 'CBIH_IA02_LIST_DISPLAY'
* EXPORTING
* I_PF_STATUS_FUNC = 'CBIH_IA02_SET_PF_ST'
* I_USER_COMMAND_FUNC = 'CBIH_IA02_USER_COMM'
* I_LAYOUT_CHANGE_FUNC = 'CBIH_IA02_LAY_SET'
* I_MASTERSTRUCT_NAME = 'CCIHS_IAHITM'
* I_SLAVESTRUCT_NAME = 'CCIHS_IAHITS'
TABLES
x_iotab = LG_IOTAB
i_ipiotab = LG_IPIOTAB
i_ipevaiotab = LG_IPEVA_IOTAB
e_mastertab = LG_MASTERTAB
e_slavetab = LG_SLAVETAB.
Similar Messages
-
ALV: Runtime error when calling only few columns of tables in ALV rpt
Dear ABAP Gurus N Experts,
I am new for ABAP.
I am creating an ALV for fetching the data from ztable. It works fine, If I select all column than .
SELECT * FROM zshipment01 INTO TABLE gi_zshipment01.
But when I try to select only few column it gives an error. Runtime errors: DBIF_RSQL_INVALID_RSQL, Exception: CX_SY_OPEN_SQL_DB
SELECT container shipment_no bill_of_lad bl_date DATE_OF_PORT ARRIVAL_NO1 ED_TRUCKING
FROM zshipment01 INTO TABLE gi_zshipment01.
I am using following function:, which is called in program as PERFORM load_data_into_grid.
FORM load_data_into_grid.
SELECT * FROM zshipment01 INTO TABLE gi_zshipment01.
Load data into the grid and display them
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'zshipment01'
CHANGING it_outtab = gi_zshipment01.
ENDFORM. " load_data_into_grid
Early response will be highly appreciated.
With thanks,
DSC
Moderator Messge: Basic questions are not allowed. Search before you post.
Edited by: kishan P on Feb 29, 2012 2:22 PMHi Devendra,
Try to use "corresponding" statement.
SELECT field1 field1 etc FROM zshipment01 *INTO CORRESPONDING FIELD OF TABLE* gi_zshipment01.
Regards,
Dondi.
Points unassigned
Edited by: kishan P on Feb 29, 2012 2:22 PM -
Runtime error when calling on SpellUI to enable spelling
I run into a problem with SpellUI in the Squiggly package that is just released. I am trying to use Squiggly for an Air 2.0 application with Flex 4.0.0 sdk, and my IDE is Flash Builder 4.0.0.
When I have an event handler method that calls on either SpellUI.enableSpelling() or setSpellingMenuEntries(), no matter the code is in a mxml component or an AS class, an error #1014 will occur during the time when the UI component or the class is loaded from a module that is built as a swf. If I choose to ignore the error and call on the event handler, nothing happens. The following is the stack trace message:
VerifyError: Error #1014: Class mx.flash::UIMovieClip could not be found.
at flash.display::MovieClip/nextFrame()
at mx.core::FlexModuleFactory/deferredNextFrame()[E:\dev\4.0.0\frameworks\projects\framework \src\mx\core\FlexModuleFactory.as:631]
at mx.core::FlexModuleFactory/update()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\cor e\FlexModuleFactory.as:401]
at mx.core::FlexModuleFactory/moduleCompleteHandler()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\core\FlexModuleFactory.as:718]
I tried to invoke SpellUI in the Air example project "UserDictionaryExample" attached in the downloaded package, I got a similar error as shown below, but the applicaiton still works.
VerifyError: Error #1014: Class IIMEClient could not be found.
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/deferredNextFrame()[E:\dev\4.0.0\frameworks\projects\framework \src\mx\managers\SystemManager.as:267]
at mx.managers::SystemManager/preloader_preloaderDocFrameReadyHandler()[E:\dev\4.0.0\framewo rks\projects\framework\src\mx\managers\SystemManager.as:2460]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx \preloaders\Preloader.as:488]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
As I can tell, the major difference between my app and the example is that my app uses spark components, including the top WindowedApplication. Another difference is that my component is loaded from a swf, whereas the exmple does not do that. Is SpellUI tested with Air 2.0, spark, and modules? Does anyone have any idea what the problem could be? Any help would be greatly appreciated!
Thanks!Thanks for your response and tests.
I figured out the problems and fixed it with a workaround to make it work for spark TextArea as you also tested.
But the workaround is not the way I want. I have an air application project with several module projects, and at runtime the modules are loaded dynamically as swfs. One of the mudules is built as a runtime shared library. That "class not found" error will go away ONLY IF the SpellUI class is forced to be built into the runtime shared library that loads other modules dynamically, including the one containing the text editor control that uses squiggly for spelling check. Ideally, I should not do that. But it seems the only way I can get rid of the error and make SpellUI work. Interestingly, I don't have this kind of problem with SpellChecker class, which is from a different swc. This seems to me is a build issue, but I am not sure. Do you have any idea why I have to do that and why SpellUI behaves differently than SpellChecker?
In addition to the above issue, I found SpellUI doesn't work for spark.components.RichEditableText. When I call SpellUI.enableSpelling() on it, nothing happens and no exception is thrown. If RichEditableText is not currently supported, do you have an plan to support RichEditableText in the future?
Thanks again. -
LV 6.0.2: an App-built dll gives a runtime error when called by C
I want to use Labview 6.0.2 VIs as DLL's in a Borland C++ Project.
Starting with the simple I have made a VI that returns a constant int32 then built a dll with the Application Builder and put the dll and include file in a BC++ project directory. Compile and link seems to run well. But when excuting the call to the LV fuction gives Fatal Error: labview.lib was not called from a Labview process.
It seems this question was posted before, but answer didn't help me, Sorry.
7.1 -- 2013
CLAHi Gabriela -
This question is answered in the KB article entitled : "LabVIEW.LIB Error When Calling a DLL Built with LabVIEW"
The link for this document is -> http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/a4c3aef93240280a86256931006fb66c?OpenDocument
Or you can go directly to www.ni.com/support and search for this document and others to help.
The reason for this is that the old labview.lib does not know how to correctly locate the LabVIEW Run-Time Engine when called.
From the document I posted ->
Your dll is most likely making a call If you want to call a Windows DLL or CIN built with a version of cintools before LabVIEW 6.0, you must relink the DLL with the labview.lib from 6.0. If you call an old DLL or CIN in your LabVIE
W DLL, you receive the aforementioned error and the application terminates, because the old labview.lib does not know how to correctly locate the LabVIEW Run-Time Engine when called in this situation.
Good luck-
ben schulte
national instruments -
Runtime error wihle calling a webservice
Hi all,
I am trying a portal application which uses an external webservice . I have created a portal service from the webservice and then used it in a portal component after excuting i am getting the following exception at run time .
com.sap.engine.services.webservices.jaxm.soap.accessor.NestedSOAPException: Problem in server response: Proxy Authentication Required.
I have given the proxy settings in the com.sap.portal.ivs.httpservice in the portal and also
defined a proxy server in the Visual Administrator under Services -> Webservice Container -> HTTP Proxy Server
I am calling service in the following manner.
IPortalRuntimeResources runtime = PortalRuntime.getRuntimeResources();
IServiceservice = runtime.getService(IWS_P_Service.KEY);
IWS_P_Service ws_service = (IWS_P_Service)service;
Volumes from = new Volumes(Volumes.VOLUMES_KILOLITER_VALUE);
Volumes to = new Volumes(Volumes.VOLUMES_LITER_VALUE);
ChangeVolumeUnit cvu = new ChangeVolumeUnit(1200,from,to);
// working upto here
response.write("working");
ChangeVolumeUnitResponse cvu_res = ws_service.ChangeVolumeUnit(cvu);
double result = cvu_res.getChangeVolumeUnitResult();
response.write(result+"");
The program is executing till "Working"
If any body has any solutions please post.
Thank
Bhavyasri.MHi,
Have a look at the below thread.... similar kind of error....
HTTP Proxy Authentication via SOAP
Proxy Authentication Required in a Web Service call
Regards,
Srinivas. -
Runtime error while calling transformations
Hello Experts,
while calling
CALL TRANSFORMATION zord1
SOURCE XML g_t_data_records1 "g_t_data_records is a string of xml file
RESULT para = zidoc.
am getting the follwing runtime errorr
XSLT_BAD_SOURCE_CONTEXT
CX_XSLT_RUNTIME_ERROR
here am trying to convert an xml file to abap string. if i execute the XSLT program directly by providing the file am getting the exact result, but when am trying to call from the ABAP program am unable to do it.
will anybody suhhest me how can i solve it.....
thx in advance....Hi
See This Link
xml to itab
XML to ABAP Conversion
I hope that this is helpful.
Regards
Ranga -
Runtime error when calling READ_TEXT FM
Hi all,
I tried to search this before I post my question. Please help.
I have a subroutine which calls the 'READ_TEXT' FM to get the basic data text from material as follow:
DATA tmp_matnr TYPE string.
DATA matnr TYPE vbap-matnr.
matnr = '27-10125-00'.
PERFORM zz_get_matnr_for_replacement USING matnr
CHANGING tmp_matnr.
FORM zz_get_matnr_for_replacement USING p_matnr TYPE vbap-matnr
CHANGING p_return.
CONSTANTS str TYPE string VALUE 'OBSOLETE'.
DATA: IT_LINE TYPE TABLE OF TLINE WITH HEADER LINE,
itab TYPE TABLE OF string WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
* CLIENT = SY-MANDT
ID = 'GRUN'
LANGUAGE = sy-langu
NAME = p_matnr
OBJECT = 'MATERIAL'
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
* IMPORTING
* HEADER =
TABLES
LINES = IT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC = 0.
LOOP AT IT_LINE.
IF IT_LINE-TDLINE cs str.
SPLIT IT_LINE-TDLINE AT space INTO TABLE itab.
EXIT.
ENDIF.
ENDLOOP.
LOOP AT itab INTO p_return.
ENDLOOP.
WRITE: / p_return.
ENDIF.
ENDFORM. "zz_get_matnr_for_replacement
When I ran my program, a short dump CALL_FUNCTION_CONFLICT_TYPE appeared. It said that the input material number (p_matnr) is conflict type.
Please help.
Thanks,
KhanhHi
Declare vatiable like below :
DATA : l_f_name like thead-tdname.
Pass your material name p_matnr to l_fname
and pass l_fname in the FM
EXPORTING
id = l_c_textid
language = l_f_langu
name = l_f_name
object = l_c_objtid
Hope this helps.
Thanks
Praveen -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Error while calling WebService inside ISchedulerTask.
Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
<service name="RFServiceWrapper">
<service-config>
<property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
VinodFollowing is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file. -
DYNPRO_NOT_FOUND runtime error in O4F2
Hi,
I am getting DYNPRO_NOT_FOUND runtime error while call screen statement is executed in t-code O4F2 in production. I checked the screen that is being called. The screen is active and there are no differences in the screen in dev and prod systems.
Can anyone please help meHi,
does thi screen has subscreens? Maybe a subscreen is missing or has an error, that it can't be generated?
Please tell us the program and the number of the screen!
Regards,
Klaus -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again. -
Lab Windows CVI call produces runtime error in VS 2012
Making a call to CVI Lab Windows -- NI VISA Libary in Resource Template -- the funtion viInstallHandler
It complies/buids into a Visual Studio 2013 project. But runiing the program on a Windows 7 machine it produces a Runtime Error.
Dose anyone have any answers or ideas???Hi jpike52,
Actually this forum is to discuss the VS IDE, as you said that if it is related to the specific project, I'm afraid that it is not the correct forum for this issue.
To help you find
more appropriate
forum, would you mind letting us know more information about it?
For example, which language did you use in your project, C#, VB or others? Which kind of project did you create, web or WinForm or others?Please let me know more
information, I will help you find a better development forum for it.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello
I work usually with large PDF documents, and I was trying to convert a PDF document of 1000 pages ONE THOUSAND PAGES, to little PDF documents of 10 MB each one.
When I tried to convert the PDF file into little ones, craaashhhhhhhhhhhhhhhhhh
I got this message:
Acrobat.exe Runtime Error! R6025 - pure virtual function call - Microsoft Visual C++ Runtime Library
This seems to be a BUG AS BIG A GRAND PIANO... so I would like someone from Adobe tell me how may I solve this problem or if they will release an update soon?
Thank youThis is a user to user forum and we don't post information here (or anywhere else public) about what may or may not be in future patch releases.
If you have a bug with an Adobe product you must report it using the correct form. -
Error when calling SOAP Runtime functions
Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivrajHi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz -
Intermittent Runtime error - pure virtual function call
I have an intermittent runtime error - pure virtual function call & don't know what cause it? Since It only occurs & crashes once awhile therefore it's difficult to trap it for debugging.I suspect it come from TestStand ActiveX API which I use in my User Interface Application project but I'm not really sure.
Does anyone experience this kind of problem when working with TestStand API ? If so any
suggestion? I have noticed in the TestStand API header file teapi.tlh contain many raw_.... function defined as pure virtual function. What are these raw_... function ? I don't think I use any of these function in my project.
Many thanks!Danh,
I don't believe that your problem can be solved with the information you have provided unless someone else has experienced the same symtpoms which coincidentally have the same cause as in your case.
Is there any other information you can provide that can help localize the problem?
1) What is happening when the error occurs?
2) Does the error always occur in the same place?
3) Does it always occur with use of certain resources (e.g. DAQ, GPIB, VISA, printer)?
4) Does it occur when using the sequence editor?
5) Does it occur when using one of the shipping operator interfaces?
6) Does it occur only when using your operator interfaces?
7)Is it related to a specific sequence or any sequence?
8) Does it happen when you executed your sequence with/without a process model entr
y point (i.e. Execute>>Test UUTs, Execute>>Singal Pass or Execute>>Run MainSequence)?
9) How often does it happen?
10) What version of TestStand are you using?
11) With what language (include versions) are you programming your code modules?
12) With what language (include versions) are you programming your operator interface?
13) Is there any error code reported with this error message?
14) Is this error reported in a TS run-time error dialog or is it reported directly 1by the operating system?
15) Have you searched the web for related errors? For example, the following link describes a particular programming mistake that can lead to this error
http://support.microsoft.com/support/kb/articles/Q125/7/49.asp
By investigating answers to the above questions you may be able to narrow the cause of this error, which might allow you or others to help solve the problem.
Maybe you are looking for
-
Can't Move pages in InDesign CS6
I have a 24 page workbook that I had to renumber the pages to start with page 2. After doing this, my pages aren't showing up next to each other. And I'm unable to move them. I've included a screen shot for reference. Any advice?
-
SO my 32gb 3gs broke, after calling Apple to order a replacement last Wednesday I was told it will not ship until July 9th. I am trying to activate my old iPhone to use until that time (AT&T says that it is completed on their end). The phone is stuck
-
Hi all. i writed report yet, i want run report in module Sales and Distribution. To Who those is help I. Thank very much.
-
Hi all, I am trying to create a procedure in database level Create or replace procedure UPD_DATE_BY( UPDATE_DATE DATE, UPDATE_BY VARCHAR2) IS ext exception; eluser varchar2(50); LDATE DATE; LBY VARCHAR2(20); BEGIN select user into eluser from dual; D
-
Hello, Not sure if I am missing something but I want to be able to go to My Music, choose an album or song and start playing the music. Then navigate to Photos and start a slideshow. Every time I do this the music stops playing when I get to the Phot