Runtime exception while updating data

Hi All,
I'm getting a runtime exception while trying to update data to cube. It if full load and the error is like
"A RAISE statement in the program "SAPLSDIFRUNTIME" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
The runtime exception is "RAISE_EXCEPTION".
Can anyone pls help me understand it and how to overcome it.
Thanks in advance,
Sananda

Hi,
Are you trying to load from DSO->Cube? or PSA->Cube?
Whatever the case, take an ABAPer's help and analyze the dump. You will get a clue.......
Regards,
Suman

Similar Messages

Error while updating data from DataStore object

Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PM

Hi Vijay,
I got this error:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
      For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
      end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
      under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
      been logged for this process.
System Response
      No log has been written. The process (and consequently the chain)
      has been terminated.
Procedure
      If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?

JDBC SQL Exception while updating an SQL database

Hi Experts,
Recently i have encountered a JDBC SQL exception while updating aSQL database as below,
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAP_UPLOAD' (structure 'Statement'): java.sql.SQLException: No more data to read from socket
the above system error didn't occur for all messages (so far happened twice), but i need to find an fix to overcome this system error.
did anybody came across the above system error, please help me to resolve.
Thanks

Hi bandana,
From SAP Note --> 831162
17. Receiver: java.sql.SQLException During First Message Processing
Q: When sending a message to a JDBC receiver channel for the first time after an extended inactivity period, I am observing a java.sql.SQLException in the adapter's processing, which refers to a closed connection or a timeout? What is causing this and how do I work around this problem?
A: The database server has apparently closed the adapter's JDBC connection from the server side. Nevertheless, the message should be processed successfully during the next retry. If you want to completely eliminate the symptoms, enable the setting "Advanced Mode" -> "Disconnect from database after each message processing". Note that this might have a negative performance impact for high-volume processing.
I would recommend you to go through the complete note !!! Very Informative .
Regards,

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Validity Table not updating for 0IC_C03 while updating data

Hi,
1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
Key fields : 0Plant
0Calday
if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
and 2LIS_03_BX in DTP I am getting below this option only
Can you please give me solution for this issues.
Regards
Umashankar

Hi Uma,
Please go through the below link which might be helpful.
Not able to Edit Validity Table : RSDV
Marker Update Option is available under Collapse tab of Info cube.
Thanks,
Karan

Avoid customizing TR while updating data of SAP standard view

Hi all,
I am preparing TC for view V_T093C_01. View is SAP view and Requirement is to avoid customizing TR while updating data. Please suggest how we shall do that.
Thanks,
Krishna.

Hi Krishna,
There is an attribute stored in the table/view maintenance dialogs, which say if there's a standard or custom transport routine to transport. By indicating a custom one, but without defining it, the system won't ask any transport request.
But I don't advise you to change it because:
- Changing this field is considered as a modification of the standard.
- why is it important that the system does not ask for a transport request? It is harmless!
Or is it that you want to allow changing it in production, in that case I would give another answer (by defining the "current settings")
Sandra

Exception while updating a table

Hi
while updating a table throw entity bean i am getting
Base EJBException
java.sql.SQLException: ORA-01401: inserted value too large for column
how to resolve this problem
com.sap.engine.services.ejb.exceptions.BaseEJBException: SQLException while the data is being flushed. The persistent object is com.chep.portfolio.da.ejb.admin.UserPreferencesEJBBean4_0Persistent.
     at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:101)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
     at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
     at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
     at com.chep.portfolio.da.ejb.admin.UserPreferencesEJBLocalLocalObjectImpl4_0.setUserProfileId(UserPreferencesEJBLocalLocalObjectImpl4_0.java:614)
     at com.chep.portfolio.admin.business.facade.user.UserFacadeBean.updateUserPreferences(UserFacadeBean.java:774)
     at com.chep.portfolio.admin.business.facade.user.UserFacadeLocalLocalObjectImpl0_0.updateUserPreferences(UserFacadeLocalLocalObjectImpl0_0.java:247)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.sql.SQLException: ORA-01401: inserted value too large for column
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2152)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2035)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2876)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:609)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.executeUpdate(PreparedStatementWrapper.java:240)
     at com.chep.portfolio.da.ejb.admin.UserPreferencesEJBBean4_0Persistent.ejb_iUpdate(UserPreferencesEJBBean4_0Persistent.java:552)
     at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:80)
     ... 33 more
java.sql.SQLException: ORA-01401: inserted value too large for column
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2152)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2035)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2876)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:609)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.executeUpdate(PreparedStatementWrapper.java:240)
     at com.chep.portfolio.da.ejb.admin.UserPreferencesEJBBean4_0Persistent.ejb_iUpdate(UserPreferencesEJBBean4_0Persistent.java:552)
     at com.sap.engine.services.ejb.entity.pm.UpdatablePersistent.ejbFlush(UpdatablePersistent.java:80)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.flushAll(TransactionContext.java:429)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.flush(TransactionContext.java:378)
     at com.sap.engine.services.ejb.entity.pm.TransactionContext.beforeCompletion(TransactionContext.java:506)
     at com.sap.engine.services.ejb.entity.SynchronizationList.beforeCompletion(SynchronizationList.java:136)
     at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:226)
     at com.chep.portfolio.da.ejb.admin.UserPreferencesEJBLocalLocalObjectImpl4_0.setUserProfileId(UserPreferencesEJBLocalLocalObjectImpl4_0.java:614)
     at com.chep.portfolio.admin.business.facade.user.UserFacadeBean.updateUserPreferences(UserFacadeBean.java:774)
     at com.chep.portfolio.admin.business.facade.user.UserFacadeLocalLocalObjectImpl0_0.updateUserPreferences(UserFacadeLocalLocalObjectImpl0_0.java:247)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
how to solve this one

Hi, vanaja,
"inserted value too large for column" - this is the reason for the exception. That is, you are trying to persist a value that exceeds the table column capacity.
What you can do is reduce the length of the data element you want to update, or, 2) first increase the relevant column maximum length, then try to update the table again.
If you choose 2), and if you are using the system database, then you can use Java Dictionary and follow [THIS|http://help.sap.com/saphelp_nw70/helpdata/en/fe/53fb40f17af66fe10000000a1550b0/frameset.htm] procedure to increase the maximum length of a column.
Hope that helps!
Regards,
Yordan

Getting a Runtime Exception while inserting value in MSAccess 2000

I am using below mentioned code to insert values in MSAccess 2000 which having table structure as mentioned below:-
Field Name
Data Type
TodaysDate
Date/Time
Cart ID
Number
Client Name
Text
Team & Segment
Text
Duration
Number
Tape ID
Text
Start Date
Date/Time
End Date
Date/Time
Code:-
private boolean enterDataIntoMSAccessDatabaseusingPreparedStatement()
        try {
            ps = connection.prepareStatement("INSERT INTO [Cart ID Details] VALUES (?,?,?,?,?,?,?,?)");
            System.out.println("After Query");
        catch (SQLException se) {
            generateErrorMessage("Error in Prepared Statement \n " + se.getMessage() );
            return false;
        catch (Exception e)
            generateErrorMessage("Unexpected Error Occured \n " + e.getMessage());
        String todaysDate = cartIDApplicationAddCartIDDatejTextField.getText().trim();
        String cartID = cartIDApplicationAddCartIDCartIDjTextField.getText().trim();
        String clientName = cartIDApplicationAddCartIDClientNamejTextField.getText().trim();
        String teamSegment = cartIDApplicationAddCartIDTeamAndSegmentjTextField.getText().trim();
        String duration = cartIDApplicationAddCartIDDurationjTextField.getText().trim();
        String tapeID = cartIDApplicationAddCartIDTapeIDjTextField.getText().trim();
        String startDate = cartIDApplicationAddCartIDStartDatejTextField.getText().trim();
        String endDate = cartIDApplicationAddCartIDEndDatejTextField.getText().trim();
        try {
            //System.out.println("Before ps.setString()");
            ps.setString(1, todaysDate);
            ps.setString(2, cartID );
            ps.setString(3, clientName);
            ps.setString(4, teamSegment);
            ps.setString(5, duration);
            ps.setString(6, tapeID);
            ps.setString(7, startDate);
            ps.setString(8, endDate);
            //System.out.println("After ps.setString()");
                ps.executeUpdate();
        catch (SQLException se) {
            generateErrorMessage("Error while inserting data in database \n " + se.getMessage());
            return false;
        catch (Exception e)
            generateErrorMessage("Unexpected Error Occured \n" + e.getMessage() );
        return true;
The above boolean function is called in "Save Button" action event, but when I click Save I am getting as Runtime Exception.
Kindly help me to sort out this issue.

Print stack traces not just messages. And it will tell you what is wrong. And if you posted the stack trace someone else might be able to tell you.
If you get an exception DO NOT CONTINUE. You can't do an update if the prepared statement failed so there is no point in trying. (Of course that depends on what 'generateErrorMessage' does)
Other than that note that you are using strings for everything even though the data types are not all text fields.

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Runtime error while loading data in BI 7.0

Hi All,
While loading data in BI 7.0,
I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
As per SAP BASIS SUPPORT comments:
"This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
So, please try to break down your data load in smaller sets and this will work OK"
How to proceed with the above comments? How to break down data load in to smaller sets?
Please helpme....

there could be various ways -
using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
Hope it helps
Vikash

Error while updating data virtual provider data to targets

Hi,
We are getting error while trying to update data from virtual cube based on a function module in 2004s.
It seems that it is complaning about the mapping of 0recordmode to the targets. has anybody faced this problem? We are in SP10
Thanks

I am sorry its not a cube but a direct update ODS to a basic ODS but both belongs to BCS. I have generated the export datasource multiple times but still no use.
The source ODS name (direct update from BCS) is called ZBCS_01Z and the target is called Z_AJ_ODS.
When I run the load I get "Job Terminated is source system" with message type X.
Here is some of parts of the dump:
Information on where terminated
    Termination occurred in the ABAP program "SAPLUCI1" - in
     "MAP_FIELDNAME_BW_2_SEM".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 245
    of the (Include) program "LUCI1F02".
    The program "SAPLUCI1" was started as a background job.
    Job Name....... "BIREQU_45J0LGOMXBS8F1LBT44BFHJDD"
    Job Initiator.. "BISWAR"
    Job Number..... 10455800
Thanks

Error while updating data to infocube

Hi BW Gurus,
I am trying to update data from PSA to a non cumulative infocube. However I am getting the following two errors while doing so.
Here is the detail of the error in the details tab.
Record 11534 :Value 'ETFHU224681М2 ' (hex. '00450054004600480055003200320034003600380031041C00') of
Error 4 in the update.
I checked the PSA for the erroneous record and found that
FHU224681М2 is the value of the 0material field.

Hi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers..

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Java Runtime exception while importing WSDL to PI 7.1

Hi Experts,
I am getting a weird java runtime error while importing the wsdl file to PI 7.1 ESR. I have checked the well formness of wsdl and its looks Ok, but some how while importing in PI ESR its giving following error log.
Thrown:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: java.lang.NoSuchMethodError: com.sap.aii.utilxi.wsdl.api.WsdlHandler.parseWsdlWithOrderRearrange(Lcom/sap/aii/utilxi/xml/xdom/XElement;Z)Lcom/sap/aii/utilxi/wsdl/api/Wsdl;
java.lang.RuntimeException: java.lang.NoSuchMethodError: com.sap.aii.utilxi.wsdl.api.WsdlHandler.parseWsdlWithOrderRearrange(Lcom/sap/aii/utilxi/xml/xdom/XElement;Z)Lcom/sap/aii/utilxi/wsdl/api/Wsdl;
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:80)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
     at
I am realy stuck now and replies are higjhly appreciated.
Cheers,
Raks

check the wsdl file in xml spy software.
chirag.

RunTime Exception while reading the file

Hi,
I am using aixs1.0 for my current project. I have uploading an image file. if the file is in c: drive then upload successfully. if the file is in desktop it gives socket connection exception. while the desktop name is with .v example.c:\documents and settings\srinivas.v\desktop\image2.gif when I amreding this file from the project it gives the following error. can u please help in this regard
10/10 18:33:12 error [axis] java.io.IOException:
java.net.SocketException: Software caused connection abort: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:106)
at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336)
at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395)
at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136)
at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191)
at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111)
at java.io.BufferedWriter.write(BufferedWriter.java:206)
at java.io.Writer.write(Writer.java:126)
at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:277)
at org.apache.axis.Message.writeTo(Message.java:440)
at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.ja
va:466)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:122)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrateg
y.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:180)
at org.apache.axis.client.Call.invokeEngine(Call.java:2564)
at org.apache.axis.client.Call.invoke(Call.java:2553)
at org.apache.axis.client.Call.invoke(Call.java:2248)
at org.apache.axis.client.Call.invoke(Call.java:2171)
at org.apache.axis.client.Call.invoke(Call.java:1691)
at com.stellent.www.CheckIn.CheckInSoapStub.checkInUniversal(CheckInSoap
Stub.java:210)
at jrun__Product_Info__CompetitiveProductConfirmation2ejsp30._jspService
(jrun__Product_Info__CompetitiveProductConfirmation2ejsp30.java:266)
at jrun.jsp.runtime.HttpJSPServlet.service(HttpJSPServlet.java:43)
at jrun.jsp.JSPServlet.service(JSPServlet.java:119)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at jrun.servlet.security.StandardSecurityFilter.doFilter(StandardSecurit
yFilter.java:103)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:
249)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:
527)
at jrun.servlet.http.WebService.invokeRunnable(WebService.java:168)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPoo
l.java:348)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
ava:451)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.
java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
10/10 18:39:47 error
java.lang.NullPointerException
at jrun__Home__Home2ejspe._jspService(jrun__Home__Home2ejspe.java:182)
at jrun.jsp.runtime.HttpJSPServlet.service(HttpJSPServlet.java:43)
at jrun.jsp.JSPServlet.service(JSPServlet.java:119)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at jrun.servlet.security.StandardSecurityFilter.doFilter(StandardSecurit
yFilter.java:103)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invokeNext(JRunRequestDispatcher.j
ava:447)
at jrun.servlet.JRunRequestDispatcher.forwardInvoke(JRunRequestDispatche
r.java:417)
at jrun.servlet.JRunRequestDispatcher.forward(JRunRequestDispatcher.java
:175)
at jrun.servlet.file.FileServlet.service(FileServlet.java:306)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at jrun.servlet.security.StandardSecurityFilter.doFilter(StandardSecurit
yFilter.java:103)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:
249)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:
527)
at jrun.servlet.http.WebService.invokeRunnable(WebService.java:168)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPoo
l.java:348)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
ava:451)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.
java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
ThankYou
Srinivas Vakkalanka

Hi,
check the MOS Note: readDomain() on UnPacked WLS 12c Domain will Fail with com.oracle.cie.common.CommonException: fail to load domain from directory. (Doc ID 1681602.1)
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1681602.1
Borys

Runtime exception while updating data

Similar Messages

Maybe you are looking for