S:move effect returns original X value

I'm working on an Item Render list which I want to play a few animations when I hover over the links. The move effect is supposed to move the label over, which is does, but after it plays the animation the label resumes its original position at the beginning. My scale effect doesn't do this, and it's making the animation a little pointless.
I think I could fix this in AS, but I was hoping for a much simpler solution. Is there one? Here's the code:
<s:List x="10" y="62"
                id="newChaps"
                dataProvider="{lastChapsData}"
                width="258"
                height="293"
                contentBackgroundAlpha="0.0"
                height.close="272"
                >
            <s:itemRenderer>
                <fx:Component>
                    <s:ItemRenderer>
                        <s:states>
                            <s:State name="normal"/>
                            <s:State name="hovered"/>
                        </s:states>
                        <s:transitions>
                            <s:Transition fromState="normal" toState="hovered">
                                <s:Parallel>
                                    <s:Move target="{titles}" duration="400" xTo="10"/>
                                    <s:Scale scaleXFrom="1" scaleXTo="1.2"
                                             scaleYFrom="1" scaleYTo="1.2"
                                             target="{titles}"/>
                                </s:Parallel>
                            </s:Transition>
                            <s:Transition fromState="hovered" toState="normal">
                                <s:Parallel>
                                    <s:Move xFrom="10" xTo="0" target="{titles}"/>
                                    <s:Scale scaleXFrom="1.2" scaleXTo="1"
                                             scaleYFrom="1.2" scaleYTo="1"
                                             target="{titles}"/>
                                </s:Parallel>
                            </s:Transition>
                        </s:transitions>
                        <s:Label text="-{data.title}"
                                 id="titles"
                                 fontSize="20"
                                 fontWeight="bold"
                                 top="5"
                                 bottom="5"
                                 />
                    </s:ItemRenderer>
                </fx:Component>
            </s:itemRenderer>
        </s:List>
Thank you for the help.

When you use effects in a transition you shouldn't define properties like xTo/yTo etc. on them directly, but instead define all of those values in the states of the target and let the transition figure out what needs to change.
So your transitions should look more like:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark">
    <s:List width="258" height="293">
        <s:dataProvider>
            <s:ArrayList>
                <fx:Array>
                    [0,1,2,3,4,5,6]
                </fx:Array>
            </s:ArrayList>
        </s:dataProvider>
        <s:itemRenderer>
            <fx:Component>
                <s:ItemRenderer>
                    <s:states>
                        <s:State name="normal"/>
                        <s:State name="hovered"/>
                    </s:states>
                    <s:transitions>
                        <s:Transition fromState="normal" toState="hovered">
                            <s:Parallel>
                                <s:Move target="{titles}" duration="400" />
                                <s:Scale target="{titles}"/>
                            </s:Parallel>
                        </s:Transition>
                        <s:Transition fromState="hovered" toState="normal">
                            <s:Parallel>
                                <s:Move target="{titles}"/>
                                <s:Scale target="{titles}"/>
                            </s:Parallel>
                        </s:Transition>
                    </s:transitions>
                    <s:Label text="-1"
                             id="titles"
                             x.hovered="10"
                             scaleX.hovered="1.2"
                             scaleY.hovered="1.2"
                             fontSize="20"
                             fontWeight="bold"
                             top="5"
                             bottom="5"
                             />
                </s:ItemRenderer>
            </fx:Component>
        </s:itemRenderer>
    </s:List>
</s:Application>

Similar Messages

  • Why does MOVE effect return object to original position?

    I am trying to implement a MOVE for a CANVAS. The move works as desired however the Canvas returns to its original position. Essentially the move happens and then everything reverses and goes back to the original state. Code is below...
    Thanks in advance,
    Russell
    <fx:Declarations>
    <mx:Move id="moveDown" target="{addSlider}" yFrom="50" yTo="155" duration="1000" />
    </fx:Declarations>
    <mx:Canvas id="addSlider" width="235" height="105" top="50" left="70" backgroundColor="0x333333" backgroundAlpha="0.8" >
    </mx:Canvas>
    <s:Button id="btnSlider" width="50" height="30" top="155" left="255" label="Help" click="moveDown.end();moveDown.play();" />

    Thank you for your response Luis and for your previous help (regarding multiple selections being added to the timeline in reverse order when working in list view in the event browser).
    Yes i've trashed my preferences, but I should be more specific as to what I am actually doing.  Because I am working from my macbook pro and do not have a "home button" which was the original shortcut to "play from/go to beginning" and because I did not like the replacement shortcut in FCP X to play from beginning (without a home button it was something like Function + Shift something else on a laptop) I became used to Adobe Premiere CS6 and made the return key my "play from beginning" shortcut.  It was available and did not have a use by itself (only to confirm changes/choices), did not effect it's use in conjunction with other shorctus so I choose enter as my "play from/go to beginning"...
    So when I play from the beginning and attempt to pause or stop the playhead, regardless of how I choose to do it (spacebar or k) it does not stop at that specific instance and always returns to where it previously was.  This seems very confusing and inconvenient, I would hope at least one of these shortcuts would actually stop the playhead where it was at that moment where I press stop or pause.  It's extremely frustrating knowing that I cannot pause the playhead where it's playing if I choose my "play from beginning" shortcut.
    Also since you seem to be a guru and an expert, i'd like to know if you cut with FCPX on a laptop and what shortcut you use whenever you'd like the playhead to go to the beginning of the timeline, end, etc since there are no "home" or "end" buttons on a laptop....
    Thanks a million, talk soon...
    Anthony

  • Return with zero value

    Dear All
    Plz see below comments of Sujay.. can any one tell me is there any other sollution for that? plz note, while i am trying to use 501 MVT with ZSPR there is no FI doccument generated but if i use ROH material, then fi doc generated with value.. why and how it is happening?
    plz advice
    Subject: Re: maintaining spares returned
    Message: As per your mentioned specification what i see is  material type ZSPR is a valuated material, so in that case if you doing reverse movement 202 wrt 201 then it should cancel the effect of 10.00 RS, which the system is doing correctly.
    Now coming to your question if you want to return the material to your respective store without any valuation, then why don't you do 501 movement.
    BR

    thanks for clarification.
    however it will not change the answer in general.
    return from user departments are usually done with 202 movement, 501 is usually used for receipts from external vendors without having a PO.
    In any case the movements will be valuated with the price in the material master, if the material type is quantity and value managed.  
    There is only one option to return at zero value: make the field fo external valuation in the movement optional, and try then to enter a zero manually while executing the movement. This will post the movement with no value and reduce the MAP of the material accordingly.
    But this is pretty dangerous as you will not really have a control about the use of this field, any user can enter any value and will effect the material prices.

  • "The movie contains an incorrect time value" error - saving a trimmed video

    I am attempting to trim a video shot on my Samsung CL65. The video was shot in High Quality HD 1280 x 720. I open the video in QuickTime and then use the Trim command to remove the last part of the video and then close it to Save it. When I save it I get the following error: "The document SAM_0306.MP4 could not be saved as "SAM_0306". The movie contains an incorrect time value." I think this has to do with an encoding error in the original file or in the trimmed file but I have no idea how to get around it.
    Any ideas?

    This info probably won't help with your problem, but it's information for others who get this error.
    It's probably the software that made the MP4. ffmpegX, for example, and the mencoder program inside it, do this with every H264 encoding when the video is longer than 1 hour. Time codes are correct up to 1 hour, then the seconds value gets wacky (3600 is added to it). Quicktime won't save a movie with a time code like 1:20:3623.120 (although it will correctly display 1:20:23 in the player).
    Apple used to offer quicktime scripts that would allow you to see what the time code in a stream really looked like. Applescript appears to have officially and quietly gone missing, though, and those scripts are no longer available online as far as I can tell. There were some really handy other scripts that would allow you to view all sorts of movie properties and manipulate tracks (great for syncing poorly synced sound, for example), but time code problems like the above would invariably mean the movie couldn't be saved.

  • Return two columns values through Javascript

    In the same goal as:
    onclick="$s('P1_DEPTNO', #DEPTNO#); return false;"
    to return a column value through javascript, is it possible to return 2 values? Example:
    onclick="$s('P1_DEPTNO', #DEPTNO#); $s('P1_EMP, #EMPLOYEE#);return false;"
    Thanks all :)
    Max

    Maxime Carrier wrote:
    In the same goal as:"Goal"?
    onclick="$s('P1_DEPTNO', #DEPTNO#); return false;"
    to return a column value through javascript, is it possible to return 2 values? Example:
    onclick="$s('P1_DEPTNO', #DEPTNO#); $s('P1_EMP, #EMPLOYEE#);return false;"Have you tried it?
    This code contains a syntax error in the form of a missing quote. It should be:
    onclick="$s('P1_DEPTNO', #DEPTNO#); $s('P1_EMP', #EMPLOYEE#);return false;"It might also produce JS syntax errors if the <tt>#DEPTNO#</tt> and/or <tt>#EMPLOYEE#</tt> values are not numbers.
    onclick="$s('P1_DEPTNO', '#DEPTNO#'); $s('P1_EMP', '#EMPLOYEE#'); return false;"would therefore be safer (assuming the code is somewhere that <tt>#DEPTNO#</tt> and <tt>#EMPLOYEE#</tt> will be substituted).
    Your post is spectacularly lacking in context. Why do you want to do this? Where?
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    Following the guidelines in these documents will also help to explain the problem in much more detail and with sufficient background for it to be understood:
    <li>+How to ask questions+
    <li>+{message:id=9360002}+

  • Return Objects by Value/Reference?

    Could someone please tell me which of this methods would be faster:
    import java.util.ArrayList;
    import java.util.List;
    public class Test {
        public static final int MAX_ITER = 2000000;
        public static void main(String[] args) {
             long begin, end = 0;
             //Return Object by Value
             begin = System.currentTimeMillis();
             List list1 = returnByValue();
             end = System.currentTimeMillis();
             System.out.println(end - begin);
             //Return Object by reference
             begin = System.currentTimeMillis();
             List list2 = new ArrayList();
             returnByRef(list2);
             end = System.currentTimeMillis();
             System.out.println(end - begin);
        public static List returnByValue() {
             List list = new ArrayList();
             for(int i=0; i<MAX_ITER; i++)
                  list.add(new Integer(i));
             return list;
        public static void returnByRef(List list) {
             for(int i=0; i<MAX_ITER; i++)
                  list.add(new Integer(i));
    }From what I understand, returnByValue would be slower as it involves creating a local List, and then returning it by way of copying itself? But surprisingly, both methods take almost identical times to run. Also, please run each method individually one at a time per run, otherwise for some reason, the second method always takes longer if ran simultaneously. Thanks.

    Okay, I thought about that, too, because I thought
    that your post did sound a bit sarcastic. Your post was most useful. I think s/he's refering to me.
    I don't care about my post count. Maybe next time
    I'll help people who are more appreciative of my
    information, instead of helping you.Actually, I think s/he's most appreciative of your excellent contribution. I believe I'm the problem.
    I think that telling people to believe the evidence in front of them is a good service to provide. You ran a test that told you the two were virtually identical. I gave you another viewpoint that said side effect free functions should be preferred, especially in situations like this one. No post count boosting there. That's good information. You just need to be sharp enough to realize it.
    %

  • Request.getParameter("checkbox") Returns only one value

    Hello Friends,
    I have a very urgent problem on live site. I moved my project from jrun2.3.3 to Jrun 3.1 and I was using multiple select and checkboxes.
    With Jrun3.1 if you select multiple select or multiple checkboxes it returns only one value instead of all the values.
    Any help is hightly appreciated.

    If multiple checkboxes have the same name, when selected and submitted, it will pass all values. But you will need to access those using getParameterValues("checkboxname") not getParameter("checkboxname"). The same goes for select elements.
    Perhaps it was a bug in JRun 2.3.3 that allowed you to reference all parameter values using just the getParameter("xxx") method.

  • How to find the original net value for a cancelled sales order

    Hi experts,
    From VA03 or table VBAP, net value for those cancelled items is always zero. Where to find those cancelled items' original net value?
    Thanks a lot.
    Yu

    Thanks Seshu,
    I just tried it as per your suggestion but I found for non-cancelled items konv-kbert is not equal to the net value taken from vbap-netwr.  So I wonder if knov-kbert is the right original net value for those cancelled items.
    Yu

  • Error: Expression must not return a multiline value

    Hi all,
    I am doing a file to file scenario. My input file has more than one record. I have to validate for each of these records and send back the erroneous records in a file to the source folder.
    I am using BPM for this. In my BPM, i have some multiline container elements. When i try to activate my BPM, i am getting an error saying: <b>Expression must not return a multiline value.</b>
    Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file.
    Regards,
    Divija.

    "Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file."
    Go through the following blogs which give step-bystep approach for split mapping using BPM:-
    1. /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    2. /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    Also, you might want to look at this, where a BPM is not required..i think you can avoid a BPM altogether if you have very little validation..
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regards,
    Sushumna

  • FM returns wrong total value for Limit type PO's

    Hi all,
    I am working on SRM 5.0 (SP13) ECS.
    I have implemented the BADI "BBP_WFL_APPROVAL_BADI" for determining the Approvers for PO whenevr a PO is changed.If the diference between the Old PO value and new PO value is > 1000 and the approval text field(custom text under "Documents" link) is set to "YES",then the WF approval is required and the approvers are determined.
    The above logic works fine for the Standard type PO's where the difference between the old value and new value is determined using FM "BBP_PD_PO_GETDETAIL"  by passing the GUID (for the change version and the active vesion) obtained at runtime in the BADI.
    However for the limit type PO's,whenevr I change the total value for the Limit item,I see that the FM "BBP_PD_PO_GETDETAIL" doesnt return the changed value but  always returns blank!
    Bcause I need to check bth the values i.e. Custom text set to "YES" as well as Total value diff ,I cant use the start conditions in tcode SWB_COND.ALso I need to fetch the approvers based on the price diff so I need this value at runtime in the BADI using the FM "BBP_PD_PO_GETDETAIL".
    Please advise why the FM is not returning the changed values for the Limit type PO and is there any other way(other table/FM) to get the changed value at runtime for the LIMIT type PO.
    Thanks for your time.
    Edited by: Rads1234 on Nov 18, 2010 4:39 AM

    Thanks for the rpely.
    Yes.I am using the GUID available at runtime in the  BADI "BBP_WFL_APPROV_BADI" which is the current change version GUID.I tried using that GUID to get the data from both FM as well as CDHDR and CDPOS tables.
    I think this is something related to LImit type PO because for Standard type PO's the FM returns the corretc changed value (as in the screen) for the change version GUID.I fail to understand why the changed values are shwon on the screen but are not stored anywhere in the system before actually ordering the PO!

  • Function to return the Entry Value based on Assignment, Element and Date

    Hi Guys,
    Is there a function that returns the Entry Value for the Assignment Element, based on the Assignment Number, Element Name, Entry Segment and the End of Period date?
    Example:
    ==============
    Input Parameters:
    Employee: Iana
    Assignment Num: 123
    Element: D480
    Element Entry: Fund Name
    Output Parameter:
    Element Entry Value: MLC Super Fund
    Thanks,
    Iana

    For element entry values you can use:
    select petf.element_name, nvl(peevf.screen_entry_value,0) screen_entry_value
    from
    pay_element_entries_f peef, pay_element_types_f petf,
    pay_element_entry_values_f peevf, pay_input_values_f pivf,
    per_all_assignments_f paaf
    where petf.element_type_id = peef.element_type_id
    and :p_date_earned between pivf.effective_start_date and pivf.effective_end_date
    and :p_date_earned between petf.effective_start_date and petf.effective_end_date
    and peevf.input_value_id = pivf.input_value_id
    and paaf.assignment_id = peef.assignment_id
    and petf.business_group_id = :p_business_group_id
    and peevf.element_entry_id = peef.element_entry_id
    and :p_date_earned between peef.effective_start_date and peef.effective_end_date
    and :p_date_earned between peevf.effective_start_date and peevf.effective_end_date
    and :p_date_earned between paaf.effective_start_date and paaf.effective_end_date
    and pivf.name = :p_input_value_name
    and petf.element_name = :p_element_name
    and peef.entry_type = 'E'
    and peevf.effective_start_date = peef.effective_start_date
    and peevf.effective_end_date = peef.effective_end_date
    --and peef.assignment_id = :p_assignment_id
    and paaf.assignment_number = :p_assignment_number;
    For payroll results you can use:
    select sum(prrv.result_value)
    from pay_run_results prr, pay_run_result_values prrv,
    pay_assignment_actions paa, pay_payroll_actions ppa,
    pay_element_types_f petf, pay_input_values_f pivf,
    per_all_assignments_f paaf, per_all_people_f papf
    where
    petf.element_type_id = pivf.element_type_id
    and :p_pay_date between petf.effective_start_date and petf.effective_end_date
    and :p_pay_date between pivf.effective_start_date and pivf.effective_end_date
    and paa.assignment_action_id = prr.assignment_action_id
    and petf.element_type_id = prr.element_type_id
    and ppa.payroll_action_id = paa.payroll_action_id
    and prrv.input_value_id = pivf.input_value_id
    and prr.run_result_id = prrv.run_result_id
    and petf.element_name = :p_element_name
    and pivf.name = :p_input_value_name
    and ppa.date_earned = :p_pay_date
    and papf.person_id = paaf.person_id
    and nvl(prr.start_date,ppa.effective_date) between paaf.effective_start_date and paaf.effective_end_date
    and nvl(prr.start_date,ppa.effective_date) between papf.effective_start_date and papf.effective_end_date
    and paaf.assignment_id = paa.assignment_id
    and papf.employee_number = :p_employee_number;

  • Recursion:returning the largest value in a linked list

    import java.io.*;
    import java.util.*;
    class Node{
         int num;
         Node next;
         Node(int n){
              num = n;
              next = null;
    class RecursivePrint{
         public static void main(String[] args){
              Node np, last;
              Node top = null;
              last = null;
              for(int i = 1; i <11; i++){
                   np = new Node(i);
                   if(top==null)top = np;
                        else
                   last.next = np;
                   last = np;
              int x =Largest(top);
             System.out.println("large is "+ x);
         }//end main
         public static int Largest(Node top){
              int large = 0;
              if(top==null){
                   return 0;
                   while(top!=null){
               if(top.num > large){
                   large = top.num;
                   //top = top.next;
              Largest(top.next);     
         }//while
         return large;
    }//end class
    I am trying to return the largest value in a linked list (10) in this case.  when I do it withour recurrsion it works ok, but when I try it with recurrsion it dies.  The logic seems ok to me, cannot figure why it dies.

    chetah wrote:
    public static int Largest(Node top){
              int large = 0;
              if(top==null){
                   return 0;
              if(top.num > large){
                   large = top.num;
                   //top = top.next;
                   Largest(top.next);
         return large;
    Initially I had the above, it return only 1 that was the reason for puting the loop.You don't seem to understand recursion or variable scope.
    int large = 0;large is a different variable inside each instance of the method.
    So when you get back up to the value 1 from the recursive calls its just comparing 1 to 0
    Here's a solution...
         public static int Largest(Node top){
              if(top.next != null){
                   if(Largest(top.next) > top.num)
                        return Largest(top.next);}
              return top.num;
         }

  • AJAX - How do we check if the response text returns a null value

    Hello,
    Could someone please help me with this issue?
    I am trying to disable a select box based on my responseText value.
    I need to check if my responseText is a null and disable my select if it is a null.
    Here is my code:
    if (xmlHttp.readyState==4)
              if(xmlHttp.status==200)     
              var getVal = xmlHttp.responseText;
              alert(getVal); //MY ALERT SHOWS A NULL     
              if(getVal == null) //but my null comparison fails
              document.all[ajaxBean.ajaxId2].disabled = true;               var valarray=getVal.split(",");
    else
                   for (var i=0; i < valarray.length;++i)
         var valarrayinner = valarray.split("|");               addOption(document.getElementById("secondBox"), valarrayinner[1], valarrayinner[0]);
    could someone tell me if its the right way to check for null value in responseText? or an alternative way to do the same
    Your help is appreciated!
    Thanks
    Priya

    Hello,
    Thank you for your promt response...I tried doing them as well. but nothing seems to work.
    It returns a length value of 1. It appears to be strange. I even tried to catch the null and set some junk text. When i try to check for the returned text again it returns a false.
    I dont know if this is the way responseText works. I tried setting a form variable but it doesnt do that too. Is there a specific way to check for the values in returned responseText?
    Thanks
    Priya

  • Powershell - Help with returning dynamic variable values

    Add-Type -AssemblyName System.Windows.Forms
    $frm1 = New-Object System.Windows.Forms.form
    $frm1.Name = "Hey"
    $flw1 = New-Object System.Windows.Forms.FlowLayoutPanel
    $flw1.flowdirection = 'TopDown'
    $frm1.controls.add($flw1)
    $m = "apple","orange","banana"
    for($i=0;$i -le $m.Length-1;$i++){
    $lb = New-Object System.Windows.Forms.linkLabel
    $lb.text = $m[$i]
    $m[$i] = $null
    $flw1.Controls.Add($lb)
    $lb.add_Click({Write-Host $lb.text})
    $frm1.showdialog()
    Could someone please help me with a method to return the value of the label that was clicked? Or a means to identify which linklabel was clicked. Thank you.

    Hi, jrv-
    Awfully sorry to trouble you. Could you please assist with the solution to this script or a better way to approach this scenario? I need to return the current value of label ($lb) from the form ($frm1), when $btnfrm2 on form ($frm2) is clicked.
    Thank you.
    Add-Type -AssemblyName System.Windows.Forms
    $frm1 = New-Object System.Windows.Forms.form
    $frm1.Name = "Hey"
    $flw1 = New-Object System.Windows.Forms.FlowLayoutPanel
    $flw1.flowdirection = 'TopDown'
    $frm1.controls.add($flw1)
    $m = "apple","orange","banana"
    function frmDisplay{
    $frm2 = New-Object System.Windows.Forms.Form
    $btnfrm2 = New-Object System.Windows.Forms.Button
    #$btnfrm2.Add_Click()
    $btnfrm2.text = 'Click'
    $frm2.Controls.Add($btnfrm2)
    $frm2.Add_Shown({$frm2.Activate()})
    [void] $frm2.ShowDialog()
    for($i=0;$i -le $m.Length-1;$i++){
    $lb = New-Object System.Windows.Forms.linkLabel
    $lb.text = $m[$i]
    $m[$i] = $null
    $flw1.Controls.Add($lb)
    $lb.add_Click({Write-Host $this.text; (frmDisplay)})
    $frm1.showdialog()

  • How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    If the film's description page says that it has different audio tracks then you should be able to select the language via the playback control : http://support.apple.com/kb/HT5562

Maybe you are looking for

  • Putting something in the middle of the widget.

    Is there any way to place a new button and a new target in the middle of the line in some composition widget, eg: "featured news", without having to move all who come after manually, one by one? In other words, you got a widget with 20 pictures, and

  • Conflicts??? If connect ATV & Airport Express in the same network?

    Since I installed AirPort Express 2 today, I couldn't use Iphone4s/ipad to airplay / mirror onto my Apple TV any more (only shows AirPort Base device). Do they conflict with each other in the same network? Anyone knows how to fix? Thanks a lot!! Will

  • Duplicate Server Settings for Backup

    I am wanting to duplicate my current Apple Server settings (10.4.8) into a new, virgin Server installation. We are basically only using IMAP mail and VPN on the server. I have found "migration" instructions from 10.3 to 10.4, that show how settings c

  • MII Profile Editor service

    Hello Experts, I have a question about MII Service: Specifically about Profile Editor service: http://<server>:<port>/XMII/Illuminator?service=admin&mode=ProfileEditor&Group=<user or role>&Type=[USER]&Payload=<xml> Could you please tell me how to use

  • Time capsule - how can I see logs from other days?

    I want to know who were connected or tried. I make sure that nobody else of our office were connected. I dont know if is that possible, I know that I can see who's connected rigth know. Can I do what I want? Thanks,