S1 array and required OBP for v440

Hi,
I have an S1 array I want to attach to a V440. I checked the documentation but there is no information. Is there a minimum OBP level on v440 to support the S1?
Thank you

I don't think so, the S1 is just a bunch of disk with no particular intelligence, so it should work with any reasonably bug-free OBP.
However, if you connect your S1 to a PCI extension card you might want to verify if that card requires any patches. If you attach it to the onboard port, i don't think you need any patches.
If you use the onboard port it might be a good idea to look in the /var/adm/messages file for any messages such as "reducing sync. transfer rate", which would indicate that they are communicating at an non-optimal speed. At the moment i dont' remember how to fix that problem, but i can look it up..
.7/M.

Similar Messages

How to use SquirrelMail and Require SSL for IMAP Service?

Hello,
Mac OS X Server v.10.4.9 – Open Directory Master
Providing POP, IMAP, SMTP, web services including webmail via SquirrelMail.
PHP v.4.4.4 Nov. 1, 2006
OpenSSL v.0.9.7l Sept. 2006
I need to require SSL for IMAP access, however, I also need to provide webmail access. SquirrelMail does support TSL it seems and that can be configured from /etc/squirrelmail/config/conf.pl and is discussed briefly here: http://www.squirrelmail.org/wiki/SquirrelMailIMAPS .
When I turn on TSL on SquirrelMail and change the IMAP port number to 993 attempting to log into SquirrelMail provides the following error:
Bad request: IMAP server does not appear to support the authentication method selected. Please contact your system administrator.
According to the above noted page from the SquirrelMail site one needs PHP 4.3 and SSLv3 in order for TSL to work, one must also connect to the IMAP server over port 993. Requirements I appear to meet.
So – how can one require the use of SSL for IMAP and still provide webmail access via SquirrelMail?
I have reviewed these three threads:
http://discussions.apple.com/thread.jspa?threadID=912841&tstart=75
http://discussions.apple.com/thread.jspa?messageID=1457773&#1457773
http://discussions.apple.com/thread.jspa?messageID=3921004&#3921004
However they do not answer the fundamental question of how to use SquirrelMail with SSL required by IMAP. Essentially the conversation revolves around working around the SSL requirement or forgoing it.
Thank you for any assistance.

David,
Yet from time to time these same users are in a
circumstance where they need to use webmail, thus
SquirrelMail needs to work. I am not trying to
secure webmail by requiring SSL.
I see, your problem. In this particular case there is a workaround.
Use different ports for postfix and cyrus limited to localhost, thus catering only to SquirrelMail, thus not needing TLS.
Roughly do this (this is just off the top of my head, may contain errors):
For SMTP / Postfix:
Edit /etc/postfix/master.cf
and add:
465 inet n - n - - smtpd
-o smtpdrecipientrestrictions= permit_mynetworks,reject
-o mynetworks=127.0.0.1/32
-o smtpdenforcetls=no
# This will create a port 465 (if you use this alreay pick another one. choose the number wisely, depending ony what is in use on your server)
# This port is only accessible to IP number in "mynetworks"
For IMAP / Cyrus
Edit /etc/cyrus.conf and add (below imap):
imaplocal cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imap" prefork=0
Next duplicate /etc/imapd.conf and name it imapd-local.conf
Edit /etc/imapd-local.conf
Change
tlsserveroptions: require
to
tlsserveroptions: use
Next edit:
/etc/services
and create a port called "imaplocal"
(you could probably recycle 585 wich is deprecated, check what is in the services file, make sure no duplicate port numbers).
should look something like:
imaplocal 585/udp
imaplocal 585/tcp
When done with all config files:
Save & restart mail services
Point SquirrelMail to the new ports wich should only be accessible to localhost (check with an external client if it holds
Sorry for the "draft style" post, but I don't have much time.
Just ask, if anything isn't clear.
HTH,
Alex

Process and Requirement Gathering for a SAP solution implementation

Hi All,
I don't know if this forum is right for my question, but can someone guide me on ....?
Assuming there is a greenfield project starting up, and the scope of implementation is SAP HCM: Is there a SAP best practice for gathering technical and functional requirements and process definition for SAP HCM system (PY, Time, PA, OM, ESS/MSS) for Great Britain country? (process models, requirements templates, questionnaire, identifying requirement gaps from standard SAP process etc.?)
Is there a methodology recommended on how to go about collecting and baselining these requirements? (workshops, schedule, resources, templates etc.)
Regards,
Girish

Hi All,
I don't know if this forum is right for my question, but can someone guide me on ....?
Assuming there is a greenfield project starting up, and the scope of implementation is SAP HCM: Is there a SAP best practice for gathering technical and functional requirements and process definition for SAP HCM system (PY, Time, PA, OM, ESS/MSS) for Great Britain country? (process models, requirements templates, questionnaire, identifying requirement gaps from standard SAP process etc.?)
Is there a methodology recommended on how to go about collecting and baselining these requirements? (workshops, schedule, resources, templates etc.)
Regards,
Girish

Data from a file to an array and opposite

Aloha! Hope you can help me on this one!
I need to read from a text (sequencial) file into an array, work on it and then save it to the origin file. How do I do this? I can only get examples of string->file file->string
Thanx in advance! :))

Hum...what I need to do is take one file and read some of it's lines into the first position of the array; and so on for the next positions. Here are the first 2 sets of lines of the file:
They represent students, wich I need to load into a CardType type array:
11
Albert Einstein
100
2
B
234
120
45
2002 11 18 //date
8 0 0 //time
2002 11 15 //date
16 20 0 //time
Stephen Jay Gould
235
3
A
512
100
50
2002 11 18 //date
8 20 0 //time
2002 11 18 //date
12 30 0 //time

How to create a grid with arrays and booleans?

As part of a bigger project, I'm trying to create a sub-VI which will allow me to move a "cursor" in a 3x3 array.
There should be 2 boolean inputs, one for moving down in the array, and the other for moving to the right. Once the edge of the array has been reached, the "cursor" will start back from the beginning.
I have a vague idea of a 2 dimensional array with LED's. Once "down" has been pressed, the LED corresponding to (0,0) will turn off, turning (0,1) on. Same goes for the "right" button. When "down" is pressed at (0,2), the LED should turn off, and LED (0,0) should turn on.
I'm sure it has something to do with initializing arrays, but i can't seem to find the right way to do it.
Any kind of assistance is much appreciated. Thanks!
Solved!
Go to Solution.

Maybe this will help.
Oh, I just noticed that I could have done the "Clear True" outside of the inner case structure and some other things too, but oh well - it works.
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
grid_png.vi ‏14 KB

How to ask for an array and how to save the values

I'm supposed to be learning the differences between a linear search and a binary search, and the assignment is to have a user input an array and search through the array for a given number using both searches. My problem is that I know how to ask them how long they want their array to be, but I don't know how to call the getArray() method to actually ask for the contents of the array.
My code is as follows:
import java.util.Scanner;
import java.util.ArrayList;
public class Main
    private static Scanner input = new Scanner(System.in);
    public static void main (String args[])
        //creates ArrayList
        int List[];
        System.out.println("How long would you like the array to be?");
        int arrayLength = input.nextInt();
        //Initializes array list
        List = new int [arrayLength];
        System.out.println("Please enter the first value of the array");
    public static void getArray(int List[], int arrayLength)
        for(int i=0; i < arrayLength; i++) {
             System.out.println("Enter the next value for array");
             List[i] = input.nextInt();
     public static void printArray(int List[])
         for(int i=0; i < List.length; i++)
             System.out.print(List[i] + " ");
public class search
    public static int binarySearch(int anArray[], int first, int last, int value)
        int index;
        if(first > last) {
            index = -1;
        else {
            int mid = (first + last)/2;
            if(value == anArray[mid]) {
                index = mid; //value found at anArray[mid]
            else if(value < anArray[mid]) {
                //point X
                index = binarySearch(anArray, first, mid-1, value);
            else {
                //point Y
                index = binarySearch(anArray, mid+1, last, value);
            } //end if
        } //end if
        return index;
    //Iterative linear search
    public int linearSearch(int a[], int valueToFind)
        //valueToFind is the number that will be found
        //The function returns the position of the value if found
        //The function returns -1 if valueToFind was not found
        for (int i=0; i<a.length; i++) {
            if (valueToFind == a) {
return i;
return -1;

I made the changes. Two more questions.
1.) Just for curiosity, how would I have referenced those methods (called them)?
2.) How do I call the searches?
import java.util.Scanner;
import java.util.ArrayList;
public class Main
    private static Scanner input = new Scanner(System.in);
    public static void main (String args[])
        //creates ArrayList
        int List[];
        System.out.println("How many values would you like the array to have?");
        int arrayLength = input.nextInt();
        //Initializes array list
        List = new int [arrayLength];
        //Collects the array information
        for(int i=0; i < arrayLength; i++) {
             System.out.println("Enter a value for array");
             List[i] = input.nextInt();
        //Prints the array
        System.out.print("Array: ");
        for(int i=0; i < List.length; i++)
             System.out.print(List[i] + " ");
        //Asks for the value to be searched for
        System.out.println("What value would you like to search for?");
        int temp = input.nextInt();
        System.out.println(search.binarySearch()); //not working
}

I forgot the apple id for my ipad 2, now it's locked and required active again?!

I want to give my ipad 2 to my brother in law, so I easered it and update it to version 7.03, and creat a new apple id for my ipad two months ago, then go travelling for more than one month.
My family try so many times of the wrong password on it, now it's lock and required to be active again.
But I forgot the id!!!
What can I do for it?

Dan Chen-hujiu wrote:
But I forgot the id!!!
What can I do for it?
Go Here > iForgot
Dan Chen-hujiu wrote:
... update it to version 7.03,.. try so many times of the wrong password on it, now it's lock and required to be active again.
The Apple ID and Password that was Originally used to Activate the iDevice is required
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
If you do not have that information you will not be able to use the Device

Help required in running SPAU and SPDD transactions for post upgrade

Hi All,
We are doing a system upgrade to EHP1.
We need help in SPAU and SPDD runs and why are they required in upgrade activity.
Kindly respond.
Thanks in advance
Regards
Rashmi

Hi Rashmi,
SPDD and SPAU are modification adjustments that you need to adjust after upgrade. This is a situation where the upgrade has to enhance some structures and elements that was available in previous version (probably 3.x). The system can not determine whether to overwrite the structures or to retain the old version. If the structures are custom structures, the system might overwrite any enhancements that you have done. In this kind of situations, the system puts any such structures and elements that it can not make a decision into these 2 lists. SPDD is for dictionary objects and SPAU is for configurations. You have to fix all the issues that are produced in these transactions. You need to first fix the ones in SPDD list and then the SPAU list. Once you drill down in those lists, it asks you to take actions like "change it", "keep the old version" or "ignore the changes" (I think these are the options). You need to chosse these options based on your analysis and turn all the yellow and red ones into green. Hope this gives you some idea.
Thanks and Regards
Subray Hegde

Required Config and testing Docs for cash management/cash forecasting

Hi All,
My client need to implement cash management/cash forecasting ..
Can anyone send the details Required Config and testing Docs for the same as earlier i have not worked in this area..
Thanks in advance...
Regards,
Sandip

Hello
Please check the below link
help.sap.com/bp.../J11_BB_ConfigGuide_EN_IN.doc - United States
Thanks & Regards
Phaneendra

Database componentes required/excluded for RMAN and Grid control repository

I'm planning creation of a centralized 10gR2 RMAN repository for my production/dev environment, and needed a basic, barebones database. We may also use that same database as a repository for 10g OEM Grid Control in the future, so I wanted to ensure I was prepared for that.
None of the documentation says anything about particular required components for RMAN, only that a database is needed. So am I allowed to deselect all items from the following DBCA list? I didn't expect any problems with the optional components, but wanted to make sure that RMAN or Grid control would function, were I to disable Oracle JVM or XML DB. My standard loadout (for better or worse) is to include everything in my production/dev databases, and I didn't want that to be the case with this one.
Database Components:
Oracle Data Mining
Oracle Text
Oracle OLAP
Oracle Spatial
Enterprise Manager Repository
Standard Database Components:
Oracle JVM
Oracle XML DB
Oracle Intermedia

Thanks. For that matter, do DBA's in the general population install those standard oracle components? I have them there in my default installs just because of the message 'Oracle recommends you have these installed.' in the DBCA screen.

Financial Accounting and requirements for Spain

What kind of legal requirements are existing for start using SAP FI in Spain? Can we make the take over from the actual system to SAP during the year? Are there any special regulations for the number assignment?
Please give me some advice about the legal requirments we need to take care for.
Thank you.

Well, there is nothing specific in this configuration which is applicable only for Spain. However, in FI, especially with bank processing and tax regulations, there are several specific developments (some of them are represented by notes) which should be taken into consideration with every project in Spain.
To start SAP project during the year is a normal thing and requires regular cut-off procedure; there are no specifics for any country.

Table name and field name for requirements.

Using tcode: MD04 for a material; click on switch to Period Totals
I do know table name and field name for Plnd ind. reqmts (PBED-PLNMG)
But I don't know table name and field name for Requirements; it gives the structure tabe
and name only. What table name and field name that hold the qty for Requirements column?
Many thanks in advanced,
Nghiem

2 months ago, you asked a very similar question... and Markus gave you a good answer. His 2-months old answer still applies here.
I recommend that you read it a again at Table name for backorder qty on sales order.
When you have read his answer, please close both threads.

Hi basically when i try download a app its saying sign in required ask for sercurity code for bank card and i put the correct details in and still saying its invalid? Can anyone help

Hi basically when i try download a app its saying sign in required ask for sercurity code for bank card and i put the correct details in and still saying its invalid? Can anyone help

Refusal of a card is based on information provided matching what is on file from your credit card provider. If it is refused, it generally means something is not matching. That can inclue the name, the address or other information. It has to be exact to match. If you check your credit card bill to make sure you are spelling the name correctly, the address is listed correctly, and yes, ST is different than Street, and it still does not work, contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

Does Apple have an alternative for adobe flash player I have websites that require it for viewing and they tell me Apple restricts Adobe.

Does Apple have an alternative for adobe flash player I have websites that require it for viewing and they tell me Apple restricts Adobe.

Hi Ron. Timely question! Try "Hype"
http://tumultco.com/hype/
Hype was just released and can be purchased at the Apple App store. I just got an iphone and resized all my websites will have to be revised. Read about it ...
http://mobile.informationweek.com/10996/show/4713846be58e278050d7a7921c8f68eb/
http://m.minyanville.com/?guid=3948&catid=5
Or go directly to http://tumultco.com/hype/ for tons of info.

DT require Oracle9i client and Oracle Services for MTS software

"Distributed Transactions require Oracle9i client and Oracle Services for Microsoft Transaction Server software."
I get the error above when attempt to run a COM+ transaction accessing Oracle9i. I'd been checked the installation of Oracle9i and Oracle Services in the client computer and it is ok.
I am using Windows Server 2003 and the database server is on another Windows Server 2003. The database is Oracle9i Enterprise Edition.
At Stanford's web site (http://www.stanford.edu/dept/itss/docs/oracle/9i/win.920/a95496/ch1.htm#1079911) I found Oracle's documentation that explains this, but it didn't worked for me.
Oracle Services is installed in both machines.
The Oracle MTS Recovery Service is running.
The COM+ component is registered.
When I use the same component with SQL Server 2005 beta 2 it works fine. What else do I need to do?
Thanks in advance.
Caio Pereira

Hi.
I have the same problem, one which works and another which don't (almost though).
I got most of it to work by taking the mtsservices registry entry from the server that works and put it on to the other after i have made the service in Oracle management console for mts.
Now i can search, delete, change but not make a new entry into the database.
And thats where i'm stuck now.
Hope it helps a bit..
Michael
Greenland

S1 array and required OBP for v440

Similar Messages

Maybe you are looking for