S125 Information Structure with no values

Hi everyone,
Since I have realized that in our ystem the information structure S125,
I would like to know which are the steps we should follow in order to activate that tructure so it takes values for example when I create a sales order.
Thanks in advance and best regards.
Ben.

Hi,
You need to do the basic settings for LIS :
Logistics Data Warehouse
   Data Basis
     Updating
        Updating Definition
        Updating Control
                Activate update
                Settings: Sales
                     Statistics Groups
                     Update Group
               Assign update group on item level
               Assign update group on header level
1). Maintain the relevant Statistic group in Customer and Material Master
2). Assign the Update group based on the Sales Area , Customr Statistics Group , Material Statistic Group, Sales Document type statistiv group, Item Cateogry Statistic group & Relevant Update group
3). Assign the Update Group based on Sales Area , Statistic Group for Customer, Statistictics group for sales document type.
Please check with these basic settings and confirm
Reward points if this helps.
Regards,
Harsh
Edited by: Harsh Mathur on Feb 27, 2008 10:30 AM

Similar Messages

How to update an information structure

Hi experts,
I create an information structure and i want have data from past purchase orders. (i only have data create after my information structure)
How can i do?
Thanks in advance,
Aurélie

Yes i know but i'm new and i try with OLI3 but nothing happens.
In my previous message, i had no data. I maintain my information structure with OMO2 and now, i have data create after my information structure. But i haven't data create before.

How to bring fields with no values into workbook..?

Hi Gurus,
We have a query, which is filtered with some 60 GL Accounts. Some of these GL account has no values or activity since long back. But we need to display it in the report for some reasons. Since it doesnu2019t have any value, its not coming up in the report. Only the accounts with values are coming up.
Is there any way I can bring these accounts in the report with 0 as values...? Any help is highly appreciated.
Thanks
Uan

Hi,
there are two ways:
1) first you update in the infocube all values from gl_account.
=> your data volume grown up very much.
2) in the query you create a structure with all values from gl_account.
Sven

Sort values of structure with arrays

Hi
For a shopping cart I'm using a structure with arrays to store the items in the cart. I tried to use StructSort but did not work...
This is how I store the items in the cart:
<cfscript>
            if (not(isdefined("session.cart"))) {                // Check to make sure that the Shopping cart structure exists.
                session.cart = structnew();
            // The item structure we are going to use to store the items in the cart
            // is going to have four parts...
            //         1. The item id
            //         2. The item name
            //         3. The price per unit
            //         4. The quantity
            tempvalue = listtoarray('#attributes.id#,#attributes.name#,#attributes.price#,#attributes.quantity#') ;
            // if the item is not yet in the cart, simply add it to the cart
            if (not(structKeyExists(session.cart, attributes.name))) {
                StructInsert(session.cart,attributes.name,tempvalue);
            // if the item is already in the cart, update the item quantity
            else {
                tempvalue[4]=session.cart[attributes.name][4]+attributes.quantity;
                StructUpdate(session.cart,attributes.name,tempvalue);
</cfscript>
Any help will be appreciated.
Thank you.
TJ

To loop over an array one has two options:
<cfloop index="i" from="1" to="#arrayLen(a)#">
Or:
<cfloop index="someVar" array="#a#">
Personally I use the former because I think the implementation of array-looping with <cfloop> is cocked-up as it's not the index that gets put into "someVar", it's the array element itself. So by way of pedantic protest, I don't use that syntax.
But anyway...
The reason why your struct is unordered is because structs are - innately, and by definition - unordered. If you want an ordered data structure, you use an array.
However what you are wanting to do is to sort your array by a subkey value of the structs the array contains. If you want to do that, you will need to roll your own sorting solution.
Personally I'd stick with using an array and just use its intrinsic ordering (the order in which items are added to it). However if you wanted to sort on one of the inner struct keys, you could maintain a separate struct keyed on the value you wish to sort on, containing a reference to the array element in the original array. Then you could extract a structKeyArray() from that, and use arraySort() to order those index keys in whichever order you like.
Adam

Copy table structure with default column values

Hi....
I created a table by copying another table structure by using below query.....
SQL> CREATE TABLE SAMPLE_TEMP AS SELECT * FROM SAMPLE WHERE 1=2;
But my problem is " the default column values are not copied to new table"
Suggest a query like that it should " copy a table structure and default values on columns "
Thanks in advance

hi,
One more option would be "dbms_redefinition' - it would work as per your requirement.
refer further to documentation : http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_redefi.htm
- Pavan Kumar N

QM , Working with Information structure and standard Analyses

I have created a Information structure S950 copying Information Structure S068.I have fews issues in the newly crerated information structure.
1) When I generated standard analyses and assigned the transaction code for it.
The descrption present in the transaction code is not shown on the selection
screen. Can anyone let me know how do Change the description on selection
screen of the standard analyses. Or how do we create "Analysis" for Standard
Analyses.
2) When I run the MCVA transaction (Standard Anaylses for Vendor - Info structure S068) I can see few Rate fields being caculated .Ex: Rejection rate . This fields are not stored phisically in the S068 but coming dynamically. I want the same fields in my transaction as it is the copy of S068. I believe this calculation are made in Supplementary Key figures. Can anyone let me know where is this supplementray key figure OR how do we set the supplemetary key figure in Custom information Structure.
I will really appreciate if any one could help me on this.

I have created a Information structure S950 copying Information Structure S068.I have fews issues in the newly crerated information structure.
1) When I generated standard analyses and assigned the transaction code for it.
The descrption present in the transaction code is not shown on the selection
screen. Can anyone let me know how do Change the description on selection
screen of the standard analyses. Or how do we create "Analysis" for Standard
Analyses.
2) When I run the MCVA transaction (Standard Anaylses for Vendor - Info structure S068) I can see few Rate fields being caculated .Ex: Rejection rate . This fields are not stored phisically in the S068 but coming dynamically. I want the same fields in my transaction as it is the copy of S068. I believe this calculation are made in Supplementary Key figures. Can anyone let me know where is this supplementray key figure OR how do we set the supplemetary key figure in Custom information Structure.
I will really appreciate if any one could help me on this.

How to create a new report from an information structure?

Dear gurus,
My customer wants to have a sales report by product hierachy. I want to create an information structure for product hierachy and create a report from this info structure like a standard report. I dun know which steps to do. Pls tell me how to do. Your help are highly appreciated.
Thank you!
Rgds,
Nghi Do

Hi,
Steps in LIS EXTRACTION:
T.code - :MC18 u2013 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 u2013 create infostructure
Example u2013
Inforstructure : S789
Application u2013 01
Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
T.code u2013 MC24 u2013 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code u2013 LBW0 - Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
T.code u2013 SBIW u2013 Display IMG (implementation guide) Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
Choose activity
Setup u2013 Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code u2013 RSA3 u2013 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code u2013 MC25, set update (V1) or (V2) or (V3)
T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side - create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
Modules for LIS : SD,MM, PP,QM.
Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables u2018SnnnBIW1u2019, u2018SnnnBIW2u2019 and the structure u2018SnnnBIWSu2019 and the InfoStructure itself u201ASnnnu2018
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure u2018SnnnnBIWCu2019 is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table u2018TMCBIWu2019. Within transaction u2018SE16u2019 youu2019ll see, that for your particular InfoStructure the field u2018BIW activeu2019 has the value u2018Xu2019 and the field u2018BIW statusu2019 is filled with value u20181u2019 (refers to table SnnnBIW1).
The orgininal LIS update program u201ARMCX#### will be enhanced within the form routines u201Aform Snnnbiw1_update_....u2018 and u201Aform Snnnbiw2_update
With the transaction u2018SE38u2019 youu2019ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a u2018BIW delta updateu2019 coding
Within the flag u201AActivate/Deactivateu2018 the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table u201ATMCBIWu2018 is defined, which table is active for delta update.
Note: The delta updating is client dependent !
Regards,
Ram Pedarla
Edited by: RamPedarla on Apr 1, 2010 10:35 AM
Edited by: RamPedarla on Apr 1, 2010 10:35 AM

Case structure with more than 200 cases, slower lab view app

Problem Description :
i am currently making a vi which compose of a simple case structures, a case structure with more than 200 cases, what i noticed is that the more i added cases the slower the labview reacts, it takes time for me to route wire on each of the cases.
i dont know if there are any setting in the labview environment that i can increase the buffer size? i dont know... but its getting slow (only on the
vi with more cases in a case structure)
mytestautomation.com
...unleashed the power, explore and share ideas on power supply testing
nissanskyline.org
...your alternative nissan skyline information site

Can you clarify what you mean by "slow". Does it run more slowly or does it feel sluggish during editing?
Could you attach the actual VI?
Overall, I agree with the notion of local variable overuse. For example, you read the same local variable twice in the same case. Is there a need for this? Is there a chance that it varies between the two reads? Typically, you would place the terminal in front of the case structure and wire to all the locations where you need the value. This ensures that the data is consistent. Still, this should not cause any slowdown problem.
(On a sidenote, the code in the upper left corner is inefficient. You convert the same data to lower case with each iteration, so you might want to place this before the loop and do it only once (well, if you are lucky, LabVIEW will fold the operation, but still....). Also your "index array" operation can be replaced by autoidenxing of the 2D array on the outer loop boundary.)
LabVIEW Champion . Do more with less code and in less time .

Dropdown - issue with passing values to context

Hi,
After facing issue in:
Webdynpro + alv + dynamic dropdown
Now I've encountered another problem. Dropdown is created in alv, however once user select value from the list it shows selected value in the cell, however value in context remains unchanged.
Here is the way I implemented dropdown:
1) I added new field to the structure which is shown in the alv FIELD1 of WDR_CONTEXT_ATTR_VALUE_LIST type.
2) I initialize the column, where dropdown is supposed to be:
- first column
l_col_name = 'COL1'.
lr_column = lr_model->if_salv_wd_column_settings~get_column( l_col_name ).
DATA: lr_drdn_by_idx_col1 TYPE REF TO cl_salv_wd_uie_dropdown_by_idx.
CREATE OBJECT lr_drdn_by_idx_col1 EXPORTING selected_key_fieldname = l_col_name.
lr_drdn_by_idx_col1->set_valueset_fieldname( value = 'FIELD1' ).
lr_drdn_by_idx_col1->set_read_only( value = abap_false ).
lr_drdn_by_idx_col1->set_type( if_salv_wd_c_uie_drdn_by_index=>type_key_value ).
lr_column->set_cell_editor( lr_drdn_by_idx_col1 ).
3) I load the data,
Piece of code loading data into structure with dropdown:
DATA: ls_valueset     TYPE wdr_context_attr_value,
            lt_itab         LIKE TABLE OF ls_line.
      ls_valueset-value = 'KG'.
      ls_valueset-text = 'KG'.
      APPEND ls_valueset TO lt_itab[].
      ls_valueset-value = 'ST'.
      ls_valueset-text = 'ST'.
      APPEND ls_valueset TO lt_itab[].
zstructure is type of the row show in the alv
Data:
     ls_po_result TYPE zstructure.
     lt_po_result TYPE table of zstructure.
     ls_po_result-FIELD1[] = lt_itab[].
     APPEND ls_po_result TO lt_po_result[].
Everything works so far good. The thing is that once I changed value from e.g. ST to KG, value in Attribute COL1 is still ST.
I would appreciate your help,
kind regards,
Adam

Hi Nithya,
it could another issue with the SP, I will inform you if it's the case.
Passing values comes up with function when I load data into alv.
structure_name - alv columns structure
DATA: l_name1        TYPE t001w-name1,
          ls_po_result   TYPE structure_name
          lt_po_result   TYPE table of structure_name,
load data from DB into l_itab
LOOP l_itab AT ASSIGNING item.
this method return value_set to field1
    CALL METHOD fill_single_dd
      EXPORTING
        i_id     = item-id
      IMPORTING
        rt_dd_table = ls_po_result-field1[].
    APPEND ls_po_result TO lt_po_result[].
ENDLOOP.
binding to node ....

LIS Info Structure with table MKPF/MSEG

Hi Gurus,
I have a view made up of table MKPF/MSEG (74 fields in totals). Based on my requirement (loading archived and non archived marerial movements data) I am looking to create an Info structure with the same 74 fields - to connect the LIS infostructures to BW.
I need to create a char. as KF fields catalog.
my issue is while doing that I am not able to have the 74 fields I am looking for (I am just getting around 50).
I know how to create an Infostructure/ Catalogue (Transaction MC21/MC18)
Any Idea how to Create an Info Structure that would have all the fields from table MKPF and MSEG?
Regards
Edited by: Blaiso on Jun 2, 2011 6:10 PM

Hi,
Steps in LIS EXTRACTION:
T.code u2013 :MC18 u2013 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 u2013 create infostructure
Example u2013
Inforstructure : S789
Application u2013 01
Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
T.code u2013 MC24 u2013 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code u2013 LBW0 u2013 Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
T.code u2013 SBIW u2013 Display IMG (implementation guide) Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
Choose activity
Setup u2013 Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code u2013 RSA3 u2013 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code u2013 MC25, set update (V1) or (V2) or (V3)
T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side u2013 create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
Modules for LIS : SD,MM, PP,QM.
Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables u2018SnnnBIW1u2019, u2018SnnnBIW2u2019 and the structure u2018SnnnBIWSu2019 and the InfoStructure itself u201ASnnnu2018
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure u2018SnnnnBIWCu2019 is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table u2018TMCBIWu2019. Within transaction u2018SE16u2019 youu2019ll see, that for your particular InfoStructure the field u2018BIW activeu2019 has the value u2018Xu2019 and the field u2018BIW statusu2019 is filled with value u20181u2019 (refers to table SnnnBIW1).
The orgininal LIS update program u201ARMCX#### will be enhanced within the form routines u201Aform Snnnbiw1_update_u2026.u2018 and u201Aform Snnnbiw2_update
With the transaction u2018SE38u2019 youu2019ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a u2018BIW delta updateu2019 coding
Within the flag u201AActivate/Deactivateu2018 the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table u201ATMCBIWu2018 is defined, which table is active for delta update.
Regards,
Prakash

Unbilled information structures in IS-U for BW

Hi!
I am doing the configuration in IS-U for getting data for unbilled revenue reporting, simulation documents...
My problem is, the information structures needs BILLRUNNO field, that exist into the table, however, when I want to select the characteristics from table, doesnt appers.... HOW CAN I SOLVE THE PROBLEM??? How can I add the field to the structure? somebody knows... it is similar to structure standard S440 and S441
Thanks a lot
BR

Hi, UIS and individual procedure doesn't exclude each other. Means, you can use the individual procedure with UIS also.
But if you want to do the individual procedure (and store the values on a granular level - that's often the case), UIS will run into performance issues because of the very high data volume.
That's why you shouldn't use UIS here but BW. Check also our Service Marketplace here.
service.sap.com/utilities -> Product Information -> Business Intelligence -> Cookbooks&Guidlines. There is a link to the help.docu provided.
How big is the customer you want to implement URR (# of customers, # of bills per year/customer)?
Regards.
Axel

DLL interfacing with mixed value and reference types

I'm currently trying to work with a supplied DLL.
I have header files and all, and the DLL import wizard does a decent job of importing the DLL functions but there are some data types which simply can't be handled.
The DLL requires usage of a data type which is a struct with value and reference data types. I could theoretically replace the references with simple U32s but much of the required information in the data is in the data structures referenced by the pointers.
How do I go about implementing this seeing how I need to be able to pass the data back into the DLL in its original form (value and reference types).
I have something like the following:
struct Item {
Int Device,
*Item Next
*Item Previous
*Data Datastruct
I have downloaded the WDK from Microsoft, have CVI and Visual Studio 2008 available. I'm not very experienced at this end of things... I can deal with Structs with pure value types but how do I get at the data in the reference types?
I strongly suspect I need a wrapper DLL, but how is the best way to go about this?
Shane.
Say hello to my little friend.
RFC 2323 FHE-Compliant
Solved!
Go to Solution.

Hi Shane,
To be honest, I don't understand why you have to pass the ENTIRE structue (if it's "Item" structure. The pointer to the next and the previous item should be held and manituplated in the DLL, doesn't it?
Operate within classes....
Are you talking about Labview Classes? I didn't use it yet. Sorry.
Convert Linked List to Array You can't store all elements by value in a cluster, because it's kind of recursive. The next pointer leads to the same Item structure (with it's own next pointer. If it's a circulary-linked-list it will never stop)
Or did you mean to store the pointers as a U32 value? That should work.
Output the struct as a binary blob Yes, why not ! But that lets me assume you don't know the concrete "Datastructure" ?!
I'm honest again I can't see the important information you mentioned if you pass the Data structure as a binary blob.
Read-only is a very good idea. If you don't need to tweak the pointers in the list you should avoid it.
Balze

Working with daynamic values

-Hi,
i had FM with import value type any that can be type of 5 structure,
and in the fm i need to do insert to DB tables( i have 5 related db tables),
my question is if from the value that i get(the structure name) in the import parameter i can know to which table i need to do the insert?
e.g.
import
im_value type any
in im_value i get str1
insert (str1) to DB1
and so on...
Best regards
Nina

Hi,
check this [presentation|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae?overridelayout=true]. It contains lots of useful information. For example the method DESCRIBE_BY_DATA of class CL_ABAP_STRUCTDESCR will return object with description of some variable. Then just call method GET_RELATIVE_NAME on returned object and you will get structure name. You can use this name to determine your target table.
Cheers

Looking for Information structure

Hi everyone,
I was wondering if there is any SD information structure which includes a field with the total amount of sales order quantity.
What I am looking for is the total amount of sales order related to a plant in a certain week.
Thanks in advance and best regards.
Thanks

Hi
I don't think there is any infostructure on the basis of Plant in the sales information system. Try difining infostrucure as a plant and for that you have to assign the key figure as incoming orders, qty, value etc

How to call a dialog program with return value in another dialog program

Dear All,
How can I call a dialog program with return value from another dialog program?
Regards,
Alok.

Hi Alok,
You can you SET/GET parameters to do this.
This is some information about this.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETERstatements.
To fill one, use:
SET PARAMETER ID pid FIELD f.
This statement saves the contents of field f under the ID pid in the SAP memory. The ID pid can be up to 20 characters long. If there was already a value stored under pid, this statement overwrites it. If you double-click pid in the ABAP Editor, parameters that do not exist can be created as a Repository object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID pid FIELD f.
This statement places the value stored under the pid ID into the variable f. If the system does not find any value for pid in the SAP memory, sy-subrc is set to 4. Otherwise, it sets the value to 0.
Thanks,
SriRatna

S125 Information Structure with no values

Similar Messages

Maybe you are looking for