Safari Bookmarks Lost via Drag and Drop to Finder

All of my most important bookmarks vanished without a trace after I dragged and dropped their folder from the "Show All Bookmarks" screen in Safari 4.0.3 to a Shared Network Drive in the Finder sidebar. The Shared Network Drive was not connected at the time (I hadn't realized), but I received no error message that the bookmarks could not be copied to the destination--the folder and its contents were simply gone. I've scoured all drives for the bookmark files with no luck, and I confirmed that dragging other files (not bookmarks) to the disconnected Shared Network Drive gives an error message and no change to file locations.
Admittedly, this particular situation is somewhat rare, but it seems like a kind of shoddy black hole in the software: no alerts, no trash bin, no bookmark files to be found.
Obviously this is a perfect example of why one should backup bookmarks via Time Machine, MobileMe, etc.--but I really just want to understand the problem, and to see it resolved if necessary. Any ideas? Similar experiences?
Thanks for reading!

Thanks very much for your reply, Carolyn.
I tried a Spotlight search as you suggested, but found no file called "Safari Bookmarks.html," and nothing with a similar name. Would that be some kind of master log of my Safari bookmarks?
I'm looking everywhere for an alternate record of those web addresses (router, cache, cookies, Google), but unfortunately I empty my Safari history regularly and nothing else has panned out so far.

Similar Messages

  • Can I move my very large iPhoto app and photos from main HD to a larger secondary HD via drag and drop?

    Can I move my very large iPhoto app and photos from main HD to a larger secondary HD via drag and drop?

    Welcome to the Apple Discussions.
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Unable to send or recieve images via drag and drop?

    I am unable to send or recieve jpg and gif images by dragging and dropping from finder. How do I fix this?

    Hi,
    Where are you dragging them to ?
    You Can do it two ways using Drag.
    One is to the Buddy's Name in the Buddy list and letting go  (it gets sent as a loose file)
    The Second is to drag it to the Text field during a Text chat (Excluding Group Chats)
    The First causes an Invite to accept to pop up on the Buddies Screen.
    You can also see see when it is Accepted (you may even have to confirm sending depending on your Settings)
    The Second gets sent as a File Link in the Chat which the Buddy has to Also Accept...
    You can also send files by highlighting a Buddy and going the the Buddies Menu > Send File.
    This method tends to point to error with the File Transfer port not being open.
    So...
    Check you can send Files first by all three methods.  (these tends to ignore  Firewall and Router settings as it is Outgoing)
    Get your Buddy to Send by all three methods.
    IF this is AIM and you are having issues log out of the Account  (IChat > Preferences > Accounts > Account Info Tab (Deselect "Use this Account")
    Now go to the Sever Settings
    Change the Default port from 5190 to 443.
    iChat Logs in on port 5190 using the TCP Protocol.
    File Transfers or Direct IMs when done in a Chat are sent on Port 5190 but on the UDP Protocol (It is Peer-to-Peer).
    Some Router don't like this dual Use.
    If you still have issues then you will need to either Enable the Firewall and check iChat in in the List of allowed Apps and/or open  port 5190 in you router. (on the UDP Protocol if stated)
    10:22 PM      Wednesday; September 28, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Cannot import MIDI by drag and drop from Finder

    Cannot import MIDI by drag and drop from Finder. Try a MIDI file from http://rock.mididb.com/beatles/ and see if it works for you.

    http://discussions.apple.com/message.jspa?messageID=10048387#10048387 worked.

  • IPhoto '09 8.1.2 Doesn't import via drag and drop!

    My Macbook Pro version of iPhoto won't allow me to drag & drop photos into the albums. It will allow import via menu but only as new events and then still won't allow me to add to existing albums. I have tried reinstalling OS as I had another problem with moving files across the network, it allowed copy but not move. When the photo is chosen I then drag into the correct album. It shows the green cross but doesn't allow the drop. It also doesn't let go of the file so the the photo is attached to the cursor until I force quit on iphoto.
    Anyone got any ideas please as I really use iphoto to push my files around my network & devices.
    Thanks
    Pete

    Read through this:
    http://www.switchingtomac.com/tutorials/osx/cant-drag-and-drop-in-os-x-lion/
    Test in another User account. Try booting into Safe Mode:
    http://support.apple.com/kb/HT1455
    If you don't maintain a current backup, I guarantee you will lose ALL of your data, not some...ALL.

  • Cannot move photos via drag and drop (library grid view)

    I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view.  I cannot get it to work.
    Steps:
    1. Mousedown on a photo (not the frame) in the grid
    2. Drag the mouse to a folder in the "Folder" pane (left of the grid)
    3. Mouseup on the destination folder
    Results:
    Nothing happens.  The mouse cursor doesn't change from the arrow.  There is no indication I can drag and drop.  The photos are not moved.
    The photos are stored on a NAS.  Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons.  From LR4, I can create new folders, but I still cannot move photos into those folders.  I also tried creating a new folder on a local drive.  Again, I was able to create the folders, but was not able to move any photos into the folder.
    What else can I do to toubleshoot this issue?

    I created a new catalog.  Imported a folder on my C drive, created a subfolder, and successfully moved photos into the subfolder.
    I tried the same steps in my original catalog and now I can move all photos (including those on my NAS).  I've been at this for 3 hours.  I have no clue why it is working now, but I guess I'm happy.  Now, it shows the stack of photos when I try to drag and drop.
    I even reverted to my original preferences file (that I backed up before deleting) and I'm still able to move the files.  Really strange.

  • Open a File in a JTextPane via Drag and Drop

    Hi,
         I have a simple JTextPane in a Swing App on Windows XP. I would like to know if it is possible for me to be able to add the functionality such that I can drag a text file to the JTextPane and it would open the file inside the Pane. Is this possible? If yes then how do I implement it? (I am not insisting on the app working on non-Win XP systems � so portability is not a concern.)
         I have tried to search for the drag and drop stuff but I am confused. First, which interfaces should I implement i.e. DragGestureListener, DragSourceListener, DropTargetListener or what?
         I would be grateful for any pointers.
    Thanks a lot,
    O.O.

    1. http://java.sun.com/docs/books/tutorial/uiswing/dnd/intro.html - This link did have the information but has since been updated and no longer points to the relevant information that I have since used.
    So you where given a link with the appropriate informaton, but Sun has changed the information and you are blaming us for not helping? Unbelievable!
    Here is a link to the old tutorial:
    https://www.cs.auckland.ac.nz/references/java/java1.5/tutorial/uiswing/dnd/intro.html#importFiles
    Now tell us how that does not do exactly what you wanted?
    I really don�t know why some people waste their time here just providing you with linksBecause most people like yourself don't know how to ask a question. DnD is a complex topic. The only way to learn it is to read a tutorial and experiment. What a better way to learn than to play with a working example. You are given many working examples in the tutorial.
    You did not state wihich example you had changed. You did not state what problems you where having.
    The best you could state was "I'm confused". You where asked to clarify your problem/confusion but didn't. We are not mind readers so we couldn't provide further help.
    I agree I am wasting my time helping someone who doesn't even appreciate the effort made by the many individuals of the forum and I won't make that mistake again.

  • Can't Replace Pages (via drag and drop in Pages panel) in Acrobat 9 Pro

    I'm running OS X 10.5.8, Acrobat Pro 9.1.3, PPC G5 PowerMac.
    I'll have two PDFs open and I'll want to replace certain pages from document A with certain pages from document B.  Rather than using the Replace Pages command from the Document menu, I prefer to visually see what I'm changing.  For this reason I've always preferred the drag and drop method, where one selects a page thumbnail from one document and drops it onto a page thumbnail in another document. This only seems to be a problem in Acrobat 9.  This works fine in Acrobat 7.1.1 and 8.1.6.  Drag and drop will allow one to insert pages but the replacement of pages is not working.  As described in Acrobat Help, under "Replace pages using a page thumbnail," I try to drop the page thumbnail onto the page number as prescribed but the page to be replaced never highlights like it should.  It will only give the insertion highlight between each page, indicating that it is about to insert a page.
    Other macs exhibit the same behavior -- it always works in Acrobat 7 and 8 but not 9.
    Thank you for your assistance.

    I'm using the Windows version of Acrobat Pro 9 and found this thread with the same problem. (Key command to replace on Windows is: Ctrl + Alt).
    Anyway, to answer the how to disable the warning, go to the Acrobat Preferences. In the General category under "Warnings", check the setting "Do not show edit warnings". There should be a similar setting on the Mac version.
    (Now I wish replacing pages didn't require a key command like in previous versions.)

  • Can't import photos via drag-and-drop (only small thumbnail will appear)

    After I drag and drop photos into iPhoto 7.1.3 (even a photo just exported from iPhoto), it shows the import process and creates an untitled event. Once complete, I see a dashed-line box instead of the images.
    http://idisk.mac.com/phildame/Public/Pictures/Skitch/iPhoto-20080308-111415.jpg
    Every time I re-open, it will try and re-import the failed photos, creating a new event each time. I have to tell it not to try recoving.
    Note that in the event view, it's a blank square. If a reduce the thumbnail slider enough the images appear in "Photos" view (as if only the small thumbnails were generated before it crapped out).
    Is anyone else seeing this? I'm not sure what to do.
    Phil

    Phil
    Two issues there:
    Every time I re-open, it will try and re-import the failed photos,...
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    2. As to the blank thumbnails:
    Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • Lost my drag and drop

    Hi there.  I updated to itunes 10.5 on Lion ysterday, and I seem to have hit a snag.  I can drag and drop everywhere EXCEPT in itunes, which is very irritating (I sort of want to throw my computer out the window).  I have logged out and in, restarted, and repaired disk permissions, which I saw suggested before, but to no effect.  This seems to be an itunes only problem.
    Any suggestions?

    An update: Realized that my Wacom tablet may be to blame, when I saw that suggested as a fix.  I updated the driver, still no luck.
    I'm unable to try it w/o the tablet, as my Magic Mouse is on the fritz again.

  • File Upload via Drag and Drop in IE10

    The drag-and-drop file upload feature introduced in Spaces PS5 is great but it is not compatible with IE9 and earlier versions (see link below).
    Has anyone tried using drag-and-drop with IE10? Did it work?
    https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=1753102566545647&type=DOCUMENT&id=1453326.1&displayIndex=1&_afrWindowMode=0&_adf.ctrl-state=nyed5wpzc_584

    I'm using the Windows version of Acrobat Pro 9 and found this thread with the same problem. (Key command to replace on Windows is: Ctrl + Alt).
    Anyway, to answer the how to disable the warning, go to the Acrobat Preferences. In the General category under "Warnings", check the setting "Do not show edit warnings". There should be a similar setting on the Mac version.
    (Now I wish replacing pages didn't require a key command like in previous versions.)

  • Can't drag and drop in Finder with trackpad or magic mouse

    I can't seem to drag and drop anthing in the Finder window since updating to Mavericks (10.9). I've tried changing all magic mouse and trackpad settings.  I can drag and drop windows and apps on the dock.  No sure what the issue is....any help is appreciated!

    Had the same problem. Reinstalled the software - all is well. Cured many ills with the initial installation - don't bother trying to play with permissions, etc. Just reinstall.
    Thank goodness this isn't Micro$oft or you'd have to sit in front of the computer to keep answering the "Okay to reboot" questions every time a chunk of code is installed.

  • Can't drag and drop in Finder

    I'm liking Leopard so far I guess, but I can't drag and drop anything on the Desktop or from Finder windows. Am I missing something?
    Jer

    Had the same problem. Reinstalled the software - all is well. Cured many ills with the initial installation - don't bother trying to play with permissions, etc. Just reinstall.
    Thank goodness this isn't Micro$oft or you'd have to sit in front of the computer to keep answering the "Okay to reboot" questions every time a chunk of code is installed.

  • Drag and drop in finder

    When i want to drag and drop files or maps in finder the finder screen is moving upwards and the files above aren't visible anymore. This happens since OS X Yosemite.

    I played with this a little bit and found that if you click somewhere on the actual name (the letters themselves) or on the icon, you will start the "drag and drop" mode. However, if you click and drag the in blank space after the letters (or between the letters and the icon), the multi-selection will start. If you click and hold on a file that is already selected, it will allow you to drag and drop. If you want to avoid having to aim at all, just double-click and hold the second click and it will let you drag and drop.
    It seems there is no timing associated with it.
    -Nik
    EDIT: Apparently I was beat to the punch.
    Message was edited by: ravenfollower

  • Problem Copying Files using Drag and Drop in Finder

    When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
    Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
    I'd love to hear whats going on here!
    Ted

    tedpratt wrote:
    When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
    What Finder "view" option are you using, List, Icons, Columns, or Cover Flow, for this question and the one below? Are you dragging those photos onto the icon of a closed folder or somewhere else? Please describe the exact process that you're executing.
    Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
    When you say "under", do you mean "within"? A new folder will be placed in the folder that's open.

Maybe you are looking for

  • How to delete empty mail messages in my Ipad2

    I am receiveng empty mail messages in IPad2 and can not select them for deletion. They have no headers, no from or to, nothing? Any clues on how to select them? Edit in mail does not work either.

  • Cant find audio driver for 3412TU

    please help me..i cant find right audio for 3412TU... plus i'm having prob with audio..even i plug mic n headphone,stil can hear sound...when i'm in mute, still can hear sound too..help me pls...thanx...

  • Please guide me how to install and upgrade ECC6.0 PI7.0 to PI7.1

    SAP Guru's Please help me as i am confused about PI7.1. In ECC6.0 SAP PI7.0 server is builtin and no need to install PI seperately like XI3.0 but i want to know how do i upgrade that ECC6.0 PI7.0 builtin server to PI7.1, what are the steps i need to

  • Adding  URL Links to Tool Area iView in Default Framework Page

    We want to add a URL link to the Tool Area  iView in  Standard Framework page.  When we edit the property "EnableLink1" and "EnableLink2" property to "True" of Tool Area iView, it shows two links in the tools area without actual links. Where do we ad

  • HT2714 My mac mini 2009 Intel based not booting?

    my mac mini not booting not responding to power buttong just a fan noise coming out off the mac, the mac is not responding please help me?