Safari slow after ADSL upgrade
Recently upgraded from 2Mb ADSL to 8Mb.
Router tells me I'm getting nearly 7 Mb down and almost 500Kb up, downloading files is so much quicker.
However opening pages in Safari has slowed down to a state where it has become annoying. In essence pages load reasonably quickly once they start, it's just waiting for them to start that causes the delay.
Is there some setting somewhere to optimise Safari for my faster ADSL, or something else I need to do.
Don't think it's my router, I only have issue on one mac, however it's a connectix I think, but it supposed to be good for 8Mb, and yes I've tried resetting.
And you did a restart of the mac after you reset the router, I presume you also use an External Modem to connect & a router for wireless, access for the other macs is that correct ?
Are all the macs running the same os build, that could make a difference.
Find your router here & or modemRouters
IPv4 Manual DHCP 10.0.0.x 255.0.0.0 10.0.0.2
Try setting it to "Using DHCP" (without manually address)
The IPv6 is not configured, correct? since the IPv4 is. If it is deselect that setting.
Yes manual DNS, it drops out if I don't, however did change it on this mac only a couple of weeks ago, my ISP was misdirecting my addresses or that's what they told me when I went to my own website and got someone else's (again only on this mac-bit strange I thought, but the alternate addresses they gave me did solve the issue, although I didn't need to alter them on any other mac)
The DNS # are always entered manually if that is what you meant.
I had a redirect issue and the new DNS #s given to me are to Opt out, so I presume you have the same sort of thing different for your location & ISP.
Please try another user or test account to see how Safari works there.
If you do not have another account.
10.4 & Adding a new user account to your computer
I have a dynamic IP. did clear cache in safari, but was reluctant to reset, I have difficulty in remembering all my passwords (should write the down I suppose), but I have done now, but no change
Dynamic IP address to be able to use applications that require a static IP address.
I understand your reluctance to Reset Safari. If there are old sites you do not use any longer or duplicates, wrong entries, etc, In Autofill trim that list that can slow thing down.
I use "Grab" in the Utilities folder to take screen shots of the names & passwords, since you do not have them jotted down that could be helpful.
I also take screenshots of network setting. Grab is cool!; )
Please try those settings in Network, do a reboot, see if that helps any,
I hope so, please let us know.
Eme;~[ )
Similar Messages
-
Late 2012 Mac Mini slow after Yosemite upgrade
First time on forums - hope Im not asking a questions that has been asked several times before. I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite. I also found a link to Etresoft from another questions and ran it. For the sake of expediency - Ill go ahead and post the results. Any thoughts? - all help is more appreciated than I can express in words..
Problem description:
Mac running very slow after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:30:25 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
8 GB DDR3 1067 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
SMS19A450 1440 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1230 4 TB
EFI (disk4s1) <not mounted> : 315 MB
Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
VIA Labs, Inc. USB3.0 Hub
hub_device
Western Digital My Passport 0741 2 TB
EFI (disk2s1) <not mounted> : 210 MB
2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
hub_device
Apple, Inc. Keyboard Hub
Logitech Optical USB Mouse
Apple Inc. Apple Keyboard
MediaTek Inc MT1887 507.9 MB
disk5s1 (disk5s1) <not mounted> : 32 KB
JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
Seagate FreeAgent FW 800mbit - 800mbit max
EFI (disk3s1) <not mounted> : 210 MB
2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Magican.app
[not loaded] com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
[not loaded] com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
5 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
4 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.magican.castle.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[running] net.kromtech.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
duet Application (/Applications/Duet.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application (/Applications/Google Chrome.app)
Box Sync UNKNOWN (missing value)
Knock Application (/Applications/Knock.app)
MagicanMonitor Application (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
Destinations:
My Book [Local]
Total size: 4.00 TB
Total number of backups: 69
Oldest backup: 2014-05-28 08:55:42 +0000
Last backup: 2015-02-09 03:04:24 +0000
Size of backup disk: Adequate
Backup size 4.00 TB > (Disk used 791.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
4% MailTab Pro for Gmail
3% Google Chrome
2% MagicanMonitor
1% bztransmit
Top Processes by Memory: ℹ️
490 MB MailTab Pro for Gmail
412 MB softwareupdated
283 MB AntiVirus
271 MB Google Chrome Helper EH
232 MB Google Chrome
Virtual Memory Information: ℹ️
2.53 GB Free RAM
6.05 GB Active RAM
1.39 GB Inactive RAM
1.70 GB Wired RAM
91.14 GB Page-ins
154 MB Page-outs
Diagnostics Information: ℹ️
Feb 8, 2015, 08:27:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
Feb 6, 2015, 08:20:10 PM Self test - passed
Feb 6, 2015, 07:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade
I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM. I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly. It's unusable to say the least. Is there anything I can do to speed it up? There must be a reason why the performance is so bad.
Problem description:
Slow after Yosemite upgrade.
EtreCheck version: 2.1.8 (121)
Report generated 1 March 2015 8:48:15 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.7 GHz Intel Core i7 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Thunderbolt Display 2560 x 1440
DX80 spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 12:20:13
Disk Information: ℹ️
Hitachi HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. iPad
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Display Audio
Firewire Information: ℹ️
BUFFALO INC. HDD 800mbit - 800mbit max
EFI (disk2s1) <not mounted> : 210 MB
ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
[loaded] org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
[loaded] org.gpgtools.Libmacgpg.xpc.plist [Click for support]
[loaded] org.gpgtools.macgpg2.fix.plist [Click for support]
[running] org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
[loaded] org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
SpiderOak Application (/Applications/SpiderOak.app)
AirServer Application Hidden (/Applications/AirServer.app)
Plex Media Server Application (/Applications/Plex Media Server.app)
Box Sync Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 21 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
1Password
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
GPGPreferences [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
Destinations:
ext2tb [Local]
Total size: 2.00 TB
Total number of backups: 38
Oldest backup: 2012-10-07 09:09:10 +0000
Last backup: 2015-03-01 09:07:46 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 197.68 GB X 3)
Top Processes by CPU: ℹ️
40% WindowServer
12% firefox
2% Activity Monitor
1% Box Sync Monitor
1% sysmond
Top Processes by Memory: ℹ️
533 MB mds_stores
498 MB firefox
429 MB softwareupdated
172 MB InterCheck
155 MB SpiderOak
Virtual Memory Information: ℹ️
8.58 GB Free RAM
4.31 GB Active RAM
2.49 GB Inactive RAM
1.79 GB Wired RAM
10.08 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 1, 2015, 08:38:46 PM /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
Mar 1, 2015, 08:30:37 PM /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
Mar 1, 2015, 04:42:31 PM /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
Mar 1, 2015, 08:26:20 AM Self test - passedWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why is my iPhone 4 slow after I upgraded to ios7?
Hello Apple team,
please can you advise why is my iPhone 4 slow after I upgraded to ios7?
Is there a way to roll back to ios 6?
Regardshttp://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
-
Too slow after Yosemite upgrade [info]
Hello fellows,
Right After upgrading to Yosemite I started facing an extremely delay almost in everything which I did not face at all before upgrading where they were times that I could use at the same time Chrome, Adobe Photoshop, Word, VMware Machine (Windows7) with insignificant delays:
On booting a white loading bar appears which takes too long before it loads OSX.
Almost in every action I take, I see the beachball spinning for too long.
Sometimes (most of the times) even typing delays a bit and the mouse buttons actions have a remarkable to extreme delay. (No battery or bluetooth problems)
I tried to take some actions like these ones: http://www.hightechdad.com/2014/10/23/13-tips-optimize-mac-yosemite-installation %20/ & http://osxdaily.com/2014/10/24/speed-up-os-x-yosemite-mac/
I used CleanMyMac 2
The general feeling is like having a machine of 90's trying to run an OS designed in 10's.
More or less my daily usage of applications includes Chrome, Safari, Skype & Microsoft Office. Nothing too heavy most of the time.
I include EtreCheck report in case it might help:
Problem description:
Everything goes slower after upgrading to Yosemite. Also at booting it shows a white loading bar which needs too much time before it initiates OSX.
EtreCheck version: 2.0.11 (98)
Report generated Δευτέρα3 Νοεμβρίου 2014 - 14:13:49 μ.μ. EET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro -
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:46:13
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (170.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Trust Webcam Trust Webcam
Logitech USB Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 69
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 23046.917896) Support
[not loaded] com.parallels.kext.hypervisor (9.0 23046.917896) Support
[not loaded] com.parallels.kext.netbridge (9.0 23046.917896) Support
[not loaded] com.parallels.kext.usbconnect (9.0 23046.917896) Support
[not loaded] com.parallels.kext.vnic (9.0 23046.917896) Support
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
[not loaded] com.ZG.driver.ZGUSBCDCACMData (1.0) Support
[not loaded] com.ZG.driver.ZGUSBMassStorageFilter (1.0) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.29) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.29) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.13) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
[not loaded] com.visicom.ManyCam.VideoDevice.driver (3.0.8 - SDK 10.7) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.zg.driver.cdc_ecm_qmi (1.0) Support
[not loaded] com.zg.driver.cdc_usb_bus (1.0) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.19) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.19) Support
[not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
/System/Library/Extensions/ManyCamVideoDeviceDriver.kext/Contents/PlugIns
[not loaded] com.visicom.ManyCam.VideoDevice.userclient (3.0.8 - SDK 10.7) Support
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.9) Support
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.trial.plist Support
[loaded] com.paragon.NTFS.upd.plist Support
Problem System Launch Daemons: ℹ️
[running] de.novamedia.nmnetmgrd.plist Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
[running] de.novamedia.VodafoneDeviceObserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.teamviewer.Helper.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
[invalid?] com.visicom.ManyCam.VideoDevice.daemon.plist Support
[loaded] ZendScriptcase71.plist Support
[loaded] ZendScriptcase8.plist Support
User Launch Agents: ℹ️
[running] com.akamai.single-user-client.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
uHD-Agent Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive ApplicationHidden (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 11.9.900.117 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 11.9.900.117 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
LogMeIn: Version: 1.0.961 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
Picasa: Version: 1.0 - SDK 10.4 Support
Safari Extensions: ℹ️
OpenIE
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
8% Google Chrome
7% JavaApplicationStub
3% WindowServer
0% fontd
0% SystemUIServer
Top Processes by Memory: ℹ️
301 MB JavaApplicationStub
266 MB Google Chrome
155 MB Safari
155 MB Google Chrome Helper
120 MB Microsoft Word
Virtual Memory Information: ℹ️
1.30 GB Free RAM
3.79 GB Active RAM
2.51 GB Inactive RAM
982 MB Wired RAM
8.00 GB Page-ins
66 KB Page-outsArthur thank you for your response.
I strongly doubt that CleanMyMac 2 did something bad since I installed it only for this reason and that was today after a week of upgrade, I never had it or knew it before. Also could not do much since I had the demo edition.
I had the same background processes before upgrading (most of them I need them, except -occasionaly - Flip4mac,Paragon,Akamai)
Either way there was nothing new installed after upgrading that might caused the issues, so I will wait for other suggestions before doing something more dramatic like reinstalling the OSX from beginning. -
MacBook Pro 13 early 2011 running slow after Yosemite upgrade
Ihave a early 2011 Macbook Pro 13 and ever since downloading Yosemite from Mavericks my computer speed decreased significantly for every function. I moved over all huge image and music files and still just little progress. So ran report on EtreCheck:
Please help me out!
Problem description:
Extremely Slow after downloading Yosemite from Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 14, 2014 at 10:31:31 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:29:28
Disk Information: ℹ️
TOSHIBA MK3265GSXF disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (145.87 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
uTorrent UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
TuneupMyMac UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
Safari Extensions: ℹ️
FastestTube
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 172.97 GB
Destinations:
MAC [Local]
Total size: 1.00 TB
Total number of backups: 22
Oldest backup: 2013-01-29 11:16:13 +0000
Last backup: 2014-09-18 17:35:05 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% fontd
0% AppleSpell
0% askpermissiond
Top Processes by Memory: ℹ️
189 MB Finder
176 MB com.apple.WebKit.WebContent
133 MB mds_stores
112 MB Safari
77 MB WindowServer
Virtual Memory Information: ℹ️
561 MB Free RAM
1.71 GB Active RAM
915 MB Inactive RAM
1.10 GB Wired RAM
1.42 GB Page-ins
29 KB Page-outsTry these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
My iPhone is slower after it upgraded.
After I upgraded my iPhone 3Gs to iOS 4.3.4, the phone is slower and mostly it bounces off when I try to open some Apps. I am not happy about it.
Is there any way to downgrade iPhone version?
Or is there any way to solve this problem? For example, restoring the iPhone?Hi,
No supported way to Downgrade... But...
If you are having Problems... Restore the Phone...
First try a Restore from Backup... If you are still having Issues after that... Then Restore as New...
See Here for
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Cheers, -
IPads extremely slow after ios8 upgrade
Hello,
I own an iPad 2 and an iPad3 retina. Both were working fine until I upgraded them to ios8.
Since then, both ipads have slowed down to a crawl. Surfing the web is *much* slower, the ipad seems to hang when you simply load a webpage. Also, the keyboard has become so slow that it lags behind the typing. I will be typing a sentence, and when I stop typing, the ipad could still have 10 characters in the keyboard buffer.
So up until last week, I had a couple of ipads that were a little bit older, but still working at an acceptable speed. Today, I have two ipads that are frustratingly slow to operate.
So the obvious thing to do would have been to downgrade back to ios7. But unfortunately, this doesn't work either. I get a message that ios7 is not compatible with my device.
So can somebody offer a solution, either a trick to downgrade to ios7, or another method to get my ipads back to their former performance.
BTW: same problem on my iphone 5, much slower as well, but here the speed is still acceptable.iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you. -
Why is my iPad so slow after ios7 upgrade?
why is my ipad running so slow after the ios7 upgrade?
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
Ipad1 is extremely, painfully slow after ios5 upgrade. Is there a fix?
Is there any fix for the awfully slow performance of iPad1 after ios5 upgrade? Mine is sometimes so slow it's impossible to use. Thanks
Mine is slower, but it's still useable. There is a update for battery draining due in a few weeks, though I don't know whether it will contain other fixes as well : http://www.bbc.co.uk/news/technology-15570462
You could try closing all apps completely and then do a reset and see if that helps. To close all apps : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I've also seen a couple of posts recommending turning off iCloud (which I haven't tried yet). -
N8 run slow after Anna upgrade
After Anna upgrade, the operation of my phone (N8) run slower generally. I am not sure I can specify few, for example, openning Photos, taking picture, working with worksheet, etc. Any solution to help pushing the speed back up?
All I can suggest is to reset the phone ! It's a pain and involves time and effort, but you can get conflict between new and old software, and a clean install always gives better results, Anna is quick and smooth on my E7 and I'm enjiying it, but I did do a reset. Back up your Contacts , Calendar and Notes ONLY (a full backup and restore will restore any conflict !!) then dial *#7370# followed by 12345 if required, then re-install Anna using Nokia Suite beta
http://betalabs.nokia.com/apps/nokia-suite-beta?req=true
Including Anna 1/2 & 2/2 , then set up your phone manually, you should see some great improvement
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
Safari slow after installing TalkTalk Fiber Optic Broadband.
Why is my Safari browsing so slow after connecting to TalkTalk's Fiber Optic Broadband connection?
I installed Firefox browser which resolved my problem.
I have a iMac with Safari as my web browser. I recently signed up for Fiber Optic Broadband Connection with TalkTalk who assured me that my internet connection will be at least 30Mb/s - as opposed to my 9Mb/s. So I did the switch and signed up for the Fiber Optic Broadband. To my horror, my web browsing became snails pace when I changed the router to the Supper Fast Router necessary to be on the TalkTalk Fiber Broadband (especially for Google home page and much worse for Youtube). I asked TalkTalk for assistance and they could not help. I then downloaded the latest Firefox browser and found that the slow speed problem was no more! I immediately removed Safari from my Dock and replaced it with Firefox. Problem Solved! :-) -
Respond slow after I upgrade to IOS6 on my iPhone 4s
After I upgrade my iPhone 4s to IOS 6, it response very slow. Please advise. Thank you!
Search this forum. Your question has already been answered.
-
My macbook got slower after the upgrade to leopard...
I got my macbook 1st week of oct of 2007...
Got my leopard upgrade about 3 weeks later after I got it...
When i first got my macbook, it boots about in 20 seconds, but after the upgrade,
it takes about 3 times the longer and it filled about 9 gig in my hard-drive ...
I just wondering if anyone has situation like mine...It definitely does sound like the hard drive is being accessed quite a bit, especially during boot-up. It's atrociously impacting performance in virtually every way.
Anyway to know for sure what's causing the slow down? Any way to make bootup faster? Any utilities that you recommend running? -
Why does safari crash after lion upgrade
why does safari crash after lion upgrade
Right or control click the Safari app in the Applications folder then click Get Info.
In the Get Info panel, look for the Safari version number. If it's prior to Safari 6, updating to Safari 6 may help.
Click here > Safari Quits Every Time Opened: Apple Support Communities
Then click the link posted by: gregoryfromcork
That will automatically download this file > Safari6Lion.pkg.download
Now quit Safari.
Go to your Downloads folder and double click that file and follow the instructions for installing.
Then restart your Mac, try Safari.
If you already have Safari 6 installed, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" sesction.
f the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Maybe you are looking for
-
Cannot install HP Officejet 5610 software for windows 8
Hi there I am running Windows 8 (64-bit) I have downloaded the HP software for the Officejet 5610 All in One. When I try to run/install the software, however, it tells me that the file is corrupt. How do I get around this? Thanks,
-
How to determine the types of interactive form fields
Hello: I have written a utility that traverses through the objects in a PDF file, and finds the ones of Type "Annot", Subtype "Widget". I need to go one step down the hierarchy and determine which kind of widget (text, radio button, check mark, press
-
[Solved] SDDM does not unlock gnome-keyring
Hi everyone! I did some searching but didn't find the answer to my issue yet. I'm using SDDM to log in to i3. The issue is that my keyring doesn't get unlocked after login and it asks for the password on first access (owncloud client). Now I want to
-
My hard drive went out and had to be replaced. I coundnt back-up anything before it happened becuase i was having so many issues with my computer. So i plugged my ipod into my computer and Itunes tells me- the ipod "my ipods name" is synced with an
-
Problem Importing Entourage into iCal
I've had several problems with iCal recently but the most frustrating one is that I can't import from Entourage. I've selected File > Import > Import Entourage Data but the application essentially locks up and no data is imported. When I Force Quit i